Top

MANIFOLD ASSEMBLY,H

Active

SPRTA126R019-3001Federal

Response Deadline08/17/2026, 04:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(1)

SPRTA1-26-R-0193-0001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 17

Solicitation

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 04:59:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

Sara Johnnie

contact@example.gov

Full Description

See attached solicitation amendment.

Similar Contracts

Same NAICS industry code

NAICS: 336413

New

DIBBS

GASKET AND SEAL SETThe contract is for a Gasket and Seal Set with NSN 1680-01-732-8787, quantity of 455 units, at a unit price of $455.00, for a total contract value of $206,975. The item is classified as a critical application item for aviation and electronic systems, requiring compliance with stringent technical and quality standards. Delivery is scheduled for 66 days after award, with FOB origin terms and zero variance allowed on quantity. Inspection and acceptance occur at origin, with packaging mandated to meet ASTM D3951 standards, unless superseded by any DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to RP001 DLA Packaging Requirements. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified using specified AQL levels. Configuration changes require an Engineering Change Proposal or Request for Variance, and government identification must be removed from non-accepted items. The seller must comply with Cybersecurity Maturity Model Certification Level 2 requirements, and documentation for source approval must be submitted per RC001. The contract is a total small business set-aside under NAICS 336413, with a response deadline of July 22, 2026. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLA Procurement Notes C19 and C20.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BELL CRANKThe contract solicitation is for a Bell Crank part identified by NSN 1680-01-155-6036, with a requested quantity of three units. The solicitation number is SPE4A5-26-T-269P, issued by the Defense Logistics Agency under the Department of Defense, and was posted on June 30, 2026. Responses are due by July 8, 2026, and the procurement is structured as a federal solicitation with no specific set-aside designation. The place of performance and office address details are not specified beyond the United States, and no point of contact information is provided within the available data. The solicitation can be accessed via the DIBBS platform using the provided UI link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SUPPORT, STRUCTURALThe contract under solicitation number SPE4A7-26-T-564P requires the supply of eight units of a structural support item identified by NSN 1560-01-549-8284, with delivery due within 30 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated. Inspection and acceptance must occur at the origin, and any configuration changes require formal Engineering Change Proposals or variance requests. Measuring and test equipment used must comply with established standards. Technical data associated with this item is subject to export controls under ITAR or EAR, and its dissemination is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Unauthorized disclosure to foreign nationals, including those within the U.S., is prohibited. The place of performance is Tinker AFB, Oklahoma, with primary point of contact at the Defense Logistics Agency.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PARTS KIT, CARTRIDGEThe contract is for a Parts Kit, Cartridge with part number C5746-75K and NSN 1650-00-442-8055, supplied by CAGE 70236 TACTAIR FLUID CONTROLS. This is a critical application item subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The product must be inspected and accepted at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, requiring all components to be secured in a single box with adequate cushioning to prevent movement and damage, accompanied by a detailed contents list. Marking must conform to MIL-STD-129 with no special marking codes, and palletization must follow DLA packaging requirements. Delivery is FOB origin, with no quantity variance allowed, and the full order of seven units must be delivered within 171 days to the DLA Distribution facility in New Cumberland, PA. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information controls. The solicitation was issued on July 17, 2026, with a response deadline of July 22, 2026, and the required delivery date is June 20, 2027.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

LINING,FRICTIONThis solicitation, issued by DLA Aviation at Philadelphia under solicitation number SPRPA126QUB42, seeks friction lining supplies under NAICS code 336413 with a response deadline of August 17, 2026. All offerings must consist of newly manufactured parts only; refurbished, remanufactured, or repaired materials are explicitly prohibited and will render an offer technically unacceptable. Suppliers must be government-approved sources, and distributors must submit an authorized distributor letter on the original manufacturer’s letterhead at the time of proposal submission. The items are Foreign Military Sales (FMS) assets fully owned by foreign customer nations, delivered through a U.S. freight forwarder to the designated country without ever entering the U.S. Department of Defense supply chain. As such, Item Unique Identification and Valuation requirements under DFARS 211.274 are not applicable because the U.S. Government never assumes ownership or control of these assets. All components must be FAA-certified with a valid FAA Form 8130-3 Airworthy Approval Tag, and Critical Safety Items are subject to DFARS 252.209-7010. Government inspection will occur at the supplier’s facility under DLAD 52.?-9004, and Contractor Business Systems may apply as relevant. The Buy American Act and Free Trade Agreements certification requirements are in effect, and small business subcontracting obligations are mandated with Maura Scanlon designated as the point of contact for compliance and inquiries. Warranty coverage is twelve months from date of acceptance or forty-five days after discovery of defect, whichever is later. Offers must comply with security restrictions, equal opportunity provisions for veterans and workers with disabilities, and specific payment and workflow instruction protocols as outlined in the contract clauses. No drawings are available; offers are based solely on supplied technical information.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Pump-Motor, Windshield

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Purchase of 5G Bandpass FilterThis solicitation requests quotations for 30 units of a 5G Bandpass Filter, part number 68013467-001, with National Stock Number 5915-01-HS3-8048, manufactured by Honeywell International under Cage Code 22373. The procurement is strictly a 100% small business set-aside under NAICS code 336413, with a small business size standard of 1,250 employees, and all offered items must be new, genuine parts directly traceable to the original equipment manufacturer with full documented audit trails. The contractor is required to submit a Certificate of Conformance in the format specified by FAR clause 52.246-15, and no drawings, specifications, or schematics are provided by the agency. Offers must be submitted via email to the designated points of contact by 12:00 PM Eastern Time on July 22, 2026, with the solicitation number included in the subject line. Award is anticipated around July 30, 2026, and will be made on a firm-fixed price basis following competitive evaluation as outlined in the attached Terms and Conditions and Schedule documents. All submissions must comply fully with the requirements set forth in this solicitation, and only the items explicitly listed will be considered for award. The contract is administered by the Aviation Logistics Center under the Department of Homeland Security, with performance to be executed in accordance with the Revolutionary FAR Overhaul provisions effective April 27, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Amendment-0001 -FD20302600725_ FA8118-26-R-0047 Reman F-15 Safety Relief Valve

POSTED

DEADLINE

Overhaul of Pumps and Valves

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

F-35 HOTASThe solicitation seeks commercial supply of F-35 Simulation Hands on Throttle and Stick Systems (HOTAS) for Edwards AFB under a full small business set-aside, with the NAICS code 336413 and a size standard of 1,250 employees. The acquisition follows Simplified Acquisition Procedures and is conducted as a Request for Quote without a written solicitation, using the SF1449 form and a separate PDF quote for full compliance. All submissions must be emailed to two designated government points of contact, with a maximum file size of 10MB, and oral offers are not accepted. The quote must include complete contractor information such as SAM UEI, TIN, CAGE code, pricing, warranty, delivery terms, FOB destination, and a technical approach demonstrating compliance with the Statement of Requirements. Price and technical acceptability are the sole evaluation factors, with award determined by the Lowest Price Technically Acceptable method, meaning the lowest-priced offer that meets all technical requirements will be selected without discussions unless the government determines otherwise. The period of performance is 160 days after award, and all quotes must be submitted by 9:00 AM Pacific Daylight Time on July 20, 2026, with questions due by July 15, 2026 at the same time. The contract will be awarded under FAR 52.212-1, -2, and -4, incorporating standard commercial product terms and conditions, and the government reserves the right to evaluate only the lowest-priced offer or consider additional submissions if necessary. The offeror’s quote must be fully responsive to meet the technical specifications of the F-35 HOTAS as defined in the attachments, and failure to provide complete information will render the submission non-responsive. The solicitation is issued under federal acquisition rules through Federal Acquisition Circular 2025-06, DFARS Change 10/24/2025, and DAFAC 2024-1016, with payment terms assumed to be NET 30 unless otherwise specified. No DPAS rating applies, and no additional contract terms beyond those cited are required.

POSTED

DEADLINE

SPE4A526R0268; 1650010462787; Slide, DirectionalThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on potential manufacturers capable of producing the item with NSN 1650-01-046-2787, identified as a Slide Directional. This request is strictly for market research and informational purposes and does not constitute a solicitation, request for proposal, or any form of government commitment. Respondents are encouraged to provide the name of the manufacturer, their city and state location, and a point of contact, all to be submitted to Annette Pruett at Annette.pruett@dla.mil. No funds are available to cover the cost of preparing responses, and all submissions are voluntary with no expectation of award or payment. The solicitation number is SPE4A526R0268, posted on July 17, 2026, with responses due by July 21, 2026, and the NAICS code associated with this requirement is 336413. The contracting office is based in Richmond, Virginia, and the place of performance is also listed in Richmond, Virginia.

POSTED

DEADLINE

16--AXLE,LANDING GEARThis contract requires the supply of a Critical Safety Item identified as part number 74A410509-1006, a landing gear axle, with the quantity increased from three to fifteen units. The item is classified as flight critical and requires engineering source approval from the Naval Air Systems Command prior to award; only approved sources are eligible, and unapproved offerors must submit extensive documentation per the NAVSUP WSS Source Approval Brochure, including configuration drawings, process sheets, purchase records, and comparative analyses. A bilateral agreement with McDonnell Douglas Aircraft (MDA) is mandatory at time of award, ensuring access to the latest technical data and MDA certification of all material, processes, and inspections. First Article Testing is required in two phases: initial testing at the contractor’s facility with MDA and government witnesses, followed by verification at MDA’s facility. Production Lot Testing follows with strict sampling, documentation, and inspection protocols, and failure to comply results in contract default. All testing, including witness requirements, must be coordinated with 30-day advance notice, and the contractor bears all associated costs. The use of MIL-W-81381 wire is prohibited; SAE-AS22759 series wire must be used instead, and compliance with IPC/EIAJ-STD-001C is required where MIL-STD-454 is referenced. Quality control mandates adherence to MIL-Q-9858A/AQAP-1, MIL-STD-130 for marking, and mandatory inspection of every first piece and every sixth piece in production. Source approval waivers for First Article or Production Lot Testing are permitted only for offerors who have delivered identical items within the past three years from the same facility, with no deviations or rejections, and must include dual pricing. Delivery timelines are strict: 430 days for First Article completion, 504 days for baseline delivery, and 90 and 180 days for First Article and Production Lot test samples. All data must be submitted via DoDSAFE, packaging must conform to MIL-STD-2073, and contractual obligations include compliance with Buy American, warranty of one year post-delivery, and restrictions on liability for high-value items. The Government may conduct a reverse auction and evaluates bids based on price, delivery, and past performance, with non-cost factors weighed equally to cost. Failure to meet any requirement, including timely submission of MDA certifications or test reports, voids

Pa DLA Aviation At Philadelphia

POSTED

about 20 hours ago

DEADLINE

in 6 days

View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336412

New

Federal

DUCT, AUGMENTOR, AIRC_End_Item_F110_NSN_2840015276870PR_PN_1452M70G10The U.S. Air Force, through the 421st SCMS Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a duct augmentor component for the F110 engine platform, identified by part number 1452M70G10 and NSN 2840-01-527-6870PR. This effort is issued as a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or request for proposal; no contract will be awarded based on responses, and no funds are currently available. The government is evaluating potential vendors—including large businesses, small businesses, disadvantaged businesses, service-disabled veteran-owned small businesses, HUBZone firms, and women-owned small businesses—to determine if the requirement can be competitively sourced or set aside for small business participation. Respondents must demonstrate the capability to handle full manufacturing processes including component procurement, inspection, testing, preservation, packaging, logistics, and supply chain management, and may be responsible for nonrecurring engineering costs to qualify as an approved source. The response deadline is July 25, 2026, and interested parties must select the “Add Me to Interested Vendors” button to participate. All communications and submissions must be directed to 421scms.requirements.workflow@us.af.mil.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

New Manufacture (Spares): Control, Power Supply / NSN 6130014164298The U.S. Government is seeking to procure nine new manufacture spares of the Control, Power Supply, NSN 6130014164298FW, part number 739557E, exclusively from Hamilton Sundstrand, the sole approved source, under a non-competitive acquisition authorized by FAR 6.302. This item is required for the B-2 aircraft’s A/A24 system, with dimensions of 25.00 inches in length, 15.00 inches in width, and 14.50 inches in height, weighing 22.80 pounds, and must be delivered by August 31, 2030, to Tinker AFB, Oklahoma. The Government has determined that technical data necessary for competitive sourcing is not physically available, cannot be obtained economically, and cannot be adequately described in specifications, justifying sole-source procurement. All proposals must be submitted electronically via SAM.gov, with a response deadline of August 14, 2026, and final award is contingent upon appropriation of funds and written confirmation by the Contracting Officer. UID marking is required, export controls do not apply, and no surplus authorization exists. While price is a major factor, past performance may also influence the award. Interested parties, including small businesses and foreign firms, are encouraged to contact the OEM and the designated Ombudsman for concerns, but direct solicitation inquiries should be directed to Kevin Howe at kevin.howe.1@us.af.mil. This procurement does not qualify as a commercial item acquisition and is not set aside for any specific socioeconomic category.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

DUCT, EXHAUST, AIRCRA_End_Item_F110_NSN_2840014622338PR_PN_1602M64G08

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

NSN3110-01-253-3236OK_RollerBearing_J85_PNR1916E112_FD2030-26-00820The contract pertains to the procurement of roller bearings designated by NSN 3110012533236, with part numbers R1916E112 and 5014T13P06, described as steel composite components designed to reduce friction. A total of 117 units are required, to be delivered in five installments to Tinker AFB, Oklahoma, with each delivery scheduled on or before the last day of the month from December 2026 through April 2027, amounting to 25 units per month for the first four shipments and 17 units in the final delivery. The contract period ends on August 30, 2026, with all deliveries scheduled to be completed by April 2027. The solicitation is conducted electronically under FAR 5.207(c)(16)(ii), allowing all responsible sources to submit proposals, and is classified as a presolicitation with a response deadline of August 17, 2026. This item was previously acquired under contract SPRTA126C0045, and the procurement is managed by the Department of Defense through the DLA Aviation office at Tinker AFB, with primary point of contact available via email for inquiries.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

New Manufacture - RECEIVER-TRANSMITTER - PN 822-3616-001The U.S. Air Force is seeking quotations for 23 Receiver-Transmitters with NSN 5820-01-431-3579FW and part number 822 3616-001, designated for use on the B-2 aircraft. The solicitation, issued under RFP# SPRTA1-26-R-0192, opens on June 30, 2026, with responses due by July 30, 2026. The item is a force element half-duplex data transmitter and receiver compatible with AFSATCOM and MILSTAR IIR satellites, housed in an aluminum alloy casing measuring 15.29 x 12.76 x 7.62 inches and weighing 38.5 pounds. Contract performance is required to be delivered by September 8, 2027, to location SW3211. Past supplies have been sourced from Rockwell Collins, Inc. and Raytheon Company, with Rockwell Collins identified as the only qualified source under this procurement. The acquisition is being conducted under FAR 6.302 with a limited competition justification due to sole-source availability of the item. The Government does not hold data rights necessary for manufacturing this component, and interested parties are directed to contact the OEM. No export controls, UID requirements, or set-asides apply, and the contract is contingent on available appropriations. Proposals must be submitted electronically via SAM.gov, and while price is a key factor, past performance may also influence award decisions. Potential offerors are encouraged to contact the designated buyer, Dana Kaiser, for clarification, and an Ombudsman is available to address participant concerns during the proposal phase.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SHAFT, TURBINE, AIRC_End_Item_F110_NSN_2840013113811PR_PN_1499M83P02The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of a turbine shaft, part number 1499M83P02 with NSN 2840-01-311-3811PR, intended for F110 platform applications. This solicitation is a Sources Sought synopsis under FAR Part 10, not a formal request for proposal, and no contract award is anticipated from this effort. The government is seeking input from potential suppliers—including large businesses, small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability, determine if the requirement can be competitively sourced, and evaluate potential for a small business set-aside. Responses must be submitted via the designated vendor interest button by the deadline, and no funding is available for information gathered during this phase. Potential vendors must demonstrate the capacity to manufacture the item from raw materials or components, including all associated processes such as inspection, testing, preservation, packaging, and shipping. Responsibilities may also extend to supply chain management, logistics planning, production forecasting, mitigation of diminishing manufacturing sources and material shortages, and handling nonrecurring engineering costs to qualify as an approved source. The designated place of performance is Tinker AFB, Oklahoma, and all correspondence must be sent to the provided workflow email. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the requirement falls under the Department of Defense’s Air Force Sustainment Center. No solicitation exists at this time, and inquiries for one will not be answered; this effort is strictly for market analysis to inform future acquisition strategy.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

F-100 Seal, Metallic, AircrThe U.S. Department of Defense, through the Ok DLA Aviation office at Tinker Air Force Base, Oklahoma, is issuing a presolicitation for the procurement of the F-100 Seal, Metallic, Aircr, identified by NSN 2840-01-436-9105NZ and part number 4082667-01, under solicitation number SPRTA1-26-R-1102. This acquisition falls under NAICS code 336412 and is not subject to any set-aside provisions, making it open to all responsible sources. The requirement is for 301 units to be delivered on or before February 9, 2028, with a potential option range extending from a minimum of 76 units to a maximum of 455 units. The item is classified as a Critical Safety Item, requiring first article testing and formal qualification of the proposed product, and is subject to export control regulations. The Government will not provide specifications, plans, or drawings for the item, placing full responsibility on the offeror to meet the required performance standards based on the item’s known designation and usage context. The solicitation will be issued electronically via www.fbo.gov with an estimated release date of June 26, 2026, and proposals are due no later than July 28, 2026. The award decision will be based on a combination of price, technical approach, and past performance, though specific evaluation criteria and weighting have not yet been determined. All offers must comply with applicable Federal Acquisition Regulation provisions, and the contract is contingent upon the availability of appropriated funds. Submission of capability statements, proposals, or quotations is encouraged under FAR 5.207(c)(16)(ii), and the Government has appointed an ombudsman to address concerns during the pre-solicitation phase. Questions should be directed to the contracting officer, Jeremy Bryant, at 405-855-7112 or Jeremy.bryant@us.af.mil. The place of performance and inspection details remain unspecified, but deliveries must be made to location SW3211, and surplus materials are not authorized for use in fulfillment of this requirement.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

RECEPTACLE ASSEMBLYThe contract solicitation SPRTA1-26-R-0303 seeks the procurement of 27 RECEPTACLE ASSEMBLY units, specifically an In-Flight Refueling Receptacle for the F-16 aircraft, identified by NSN 1680-01-057-3391RK and Part Number 4011-51. The item is constructed of aluminum with dimensions of 16.0000 in length, 13.0000 in width, and 10.0000 in height, weighing 23.0000 LB, and is intended as a spares replacement. The delivery schedule requires shipment of 1 to 27 units between December 16, 2028, and January 13, 2029, to SW3211, Tinker AFB, OK, with early delivery permitted. The contract includes a potential option range from a minimum of 7 to a maximum of 41 units. IUID marking is required on all deliverables, and export control regulations apply due to the nature of the item. The government will only issue a request for written proposals, and submissions must be made electronically via SAM.gov. This solicitation is conducted under FAR 6.302, indicating a sole source or limited competition approach, and FAR Part 12 for commercial items is explicitly not applied. The evaluation will consider price as a significant factor and may also incorporate past performance in the award decision, though specific weighting is not defined. Funding is contingent upon the availability of appropriated funds, with no legal obligation to pay until the contractor receives written confirmation from the Contracting Officer that funds are available. Packaging and marking must meet IUID standards, and all items must be marked for Account 09. The point of contact for inquiries is Genevee Suba at genevee.suba@us.af.mil, and an Ombudsman is available to receive confidential concerns during proposal development at (405) 855-3552. No specific qualification documents or representations are listed, but formal qualification requirements do exist for this item.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FRAME, TURBINE, AIRCR_End_Item_F110_NSN_2840013372542PR_PN_1602M64G07

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CASE AND VANE ASSEM_2840015278472_PR 2214M16G01

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

ROTOR, COMPRESSOR, AI_End_Item_F110_NSN_2840015276505PR_PN_2214M14G01

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

F-100 Cooler, Lubricating

Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

N/A

View Details