This Government Contract opportunity from Government of Canada was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture and Supply of Labyrinth Seal Rings

Closed

International

Submission Closed05/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336411

New

DIBBS

SCREW, EXTERNALLY RELIE

Solicitation # SPE4A6-26-T-11ZH

The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-913H

The contract pertains to the procurement of a single gasket with National Stock Number 5330-12-322-7856 and part number 5550740780, to be delivered in one unit under solicitation SPE7L1-26-T-913H. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, particularly due to its use in Federal Supply Classes 5330/5331. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry preservation and cushioning material JB, and markings must comply with MIL-STD-129, including the special shelf-life code 32. The gasket is explicitly exempt from asbestos under FED-STD-313, and multiple manufacturer part numbers are acceptable as listed. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery window is twenty days from the award date, with an original required delivery date of July 31, 2026, and shipping must be by the fastest traceable means, excluding parcel post, to the designated FPO address via Vessel Shipment RDD 777. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or amendment date. Government use identifiers and shipping codes are provided for logistics tracking, and the primary point of contact is Kristina Derry at DLA Land and Maritime.

POSTED

DEADLINE

BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK

Solicitation # SPE4A7-26-R-0713

The contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-321G

The contract is for the procurement of 30 turbine wheels for aircraft applications, identified by part number 205424 and NSN 1660-00-594-7233, sourced from Honeywell International Inc. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications. Compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization is mandatory, with all packaging subject to DLA’s overarching requirements. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per critical, major, and minor characteristics. Delivery is scheduled for 739 days after award, with FOB origin shipment terms and inspection and acceptance occurring at destination. The unit of issue is each, with no variance permitted in quantity. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the need ship date is August 21, 2028, with an original required delivery date of November 1, 2028. Cybersecurity requirements include CMMC Level 2 self-assessment, and the contractor must comply with all applicable defense information handling standards. The item is not required to carry Unique Identification under DFARS 252.211-7003, as specified by the service customer. The contract was issued under solicitation SPE4A5-26-T-321G, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-326T

This contract specifies the procurement of a metallic disc valve, identified by part number 2284W225 and NSN 1660997394942, with a quantity of 14 units. The item is subject to technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with sampling protocols per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization must follow DLA packaging requirements and be grouped in lots of 200 per intermediate container. The valve is to be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Cybersecurity requirements include CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Unit of issue is each, and the contract includes transportation directives referencing DLAD procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336411, managed by the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-911M

The contract pertains to a single gasket item identified by NSN 5330-01-313-3578, with a required delivery within 20 days of award, and is classified as a commercial item including commercial of a type. It is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date. The gasket must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval per Clause L30 and Provision 4 conditions. The contractor must be CMMC Level 2 certified through a qualified third-party assessment organization, and all items must comply with MIL-STD-130N for identification marking of U.S. military property. Government identification must be removed from non-accepted supplies, and covered defense information handling is required. The solicitation, issued under SPE7L1-26-T-911M, has a response deadline of August 17, 2026, and performance is to occur in Huntsville, Alabama, with Kristina Derry listed as the primary point of contact.

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-326P

The contract specifies the procurement of a BODY, VALVE ASSEMBLY with part number 2515W750 and NSN 1660995356040, requiring three units to be delivered FOB origin within 171 days, with a required ship date of January 31, 2027, and original delivery deadline of November 12, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. The item is not subject to Unit Unique Identification per DFARS 252.211-7003(c)(1)(i), and physical marking must follow RQ017. Acceptance occurs at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all materials must adhere to DLA’s procurement and transportation directives including freight shipping to the DDSP New Cumberland Facility in Pennsylvania. The contract enforces a strict 0% variance on quantity and specifies inspection and acceptance points at the destination, with unit of issue as individual units and pricing set at $3.00 per unit.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-911D

The contract is for the procurement of one gasket with NSN/Part Number 5330-01-311-9345 under solicitation SPE7L1-26-T-911D, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order. The item is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited in the manufacture or incorporation of the gasket, and any substitute materials must be submitted for approval unless explicitly authorized by specification requirements. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by a DLA-recognized third-party assessment organization, as the item involves covered defense information. Technical data associated with the gasket is subject to export controls under either ITAR or EAR, and disclosure to foreign persons, including foreign nationals within the U.S., is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and formal approval from DLA. The place of performance is Huntsville, Alabama, and primary point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.

POSTED

DEADLINE

Drone Marketplace Onboarding of Group 3 UAS

Solicitation # W58RGZ-26-S-C001-0008

The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.

POSTED

DEADLINE

Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories

Solicitation # W58RGZ-26-S-C001-0007

The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.

POSTED

DEADLINE

HH-60W Degraded Visual Environment System(DVES) - FA8552-26-R-B001

Solicitation # FA8552-26-R-B001

The United States Air Force is seeking a system to mitigate the risks associated with Degraded Visual Environments (DVE) for the HH-60W Jolly Green II helicopter, requiring a comprehensive solution that detects hazards in real time during both enroute and terminal phases of flight. This system must function reliably across diverse challenging conditions such as smoke, smog, snow, nighttime sand or dust storms, and aircraft-induced brownout and whiteout scenarios, delivering clear, actionable data to cockpit and cabin displays to enhance situational awareness and safety. The effort encompasses the full lifecycle of the Degraded Visual Environment System (DVES), including design, development, testing, integration, procurement, installation, and deployment of the required hardware and software kits, along with all non-recurring engineering necessary to adapt the system to the HH-60W platform. The contract will be structured with a 24-month base period and the potential to activate up to five additional ordering periods, creating a maximum possible duration of eight years. The solicitation, identified as FA8552-26-R-B001, was posted on June 23, 2026, with proposals due by July 15, 2026. It falls under NAICS code 336411 for aircraft manufacturing and carries no set-aside designation, representing an open competition. The contract office is located at Robins Air Force Base in Georgia, with primary point of contact Theresa Younce and secondary contact Millie Danko available for inquiries. Performance is expected to support Air Force operations globally, with the system intended to significantly improve operational capability and crew safety under adverse visual conditions.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-863J

The contract solicitation SPE7L1-26-T-863J seeks the procurement of six gaskets with NSN 5330-00-614-8048, to be delivered to the U.S. Coast Guard Air Station Barber’s Point in Kapolei, HI, within 20 days of award. The item must comply with strict packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, and adherence to special marking code 20 for “Do not bend.” The gasket must be free of asbestos as defined in FED-STD-313, and all hazardous materials must be labeled in accordance with 29 CFR 1910.1200, unless exempted under specified federal statutes. Barcoding per MIL-STD-129 is mandatory for all shipments, and palletization must follow DLA’s RP001 Packaging Requirements. Inspection and acceptance will occur at destination under FAR 52.246-2, with the government retaining authority to reject nonconforming items. The contract mandates compliance with multiple DFARS and FAR clauses, including cybersecurity requirements under NIST SP 800-171, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and obligations related to trafficking in persons, employment eligibility, and whistleblower rights. Offerors must be registered in SAM with a valid UEI and CAGE code, and must declare their small business status and socioeconomic classifications if applicable. All proposals must be submitted electronically via DIBBS by August 6, 2026, and any award will require electronic invoicing through WAWF. The contract type is not explicitly stated but is presumed to be fixed-price, consistent with DLA’s simplified acquisition procedures. No pricing data is available in the solicitation, as unit cost and total value will be determined post-award.

LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 1 day

AI Contract Overview

The contract entails the precision manufacturing and delivery of three labyrinth seal rings designed for use in non-aircraft gas turbine engines, ensuring full compliance with original equipment manufacturer specifications for form, fit, function, quality, and seamless interoperability with Canadian military systems. The components must meet rigorous engineering and performance standards to guarantee reliability in operational environments, with all work executed to align with Canadian defense requirements and integration protocols. The solicitation is issued as a subcontract under the Department of National Defence, with a response deadline of May 21, 2026, and a posting date of May 5, 2026. The North American Industry Classification System code 336411 indicates the work falls within aerospace product and parts manufacturing. Place of performance is designated for British Columbia and Nova Scotia, suggesting production or delivery activities may occur across multiple locations within these provinces. The contract is part of broader efforts by the Government of Canada to secure mission-critical components for its defense infrastructure.

General Info

Manufacture and supply three OEM-spec labyrinth seal rings compatible with Canadian military gas turbines.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 5

subcontract

Response DeadlineMay 21

Deadline has passed

Submission Closed

05/21/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Precision manufacturing and delivery of three labyrinth seal rings for non-aircraft gas turbine engines, meeting OEM specifications for form, fit, function, quality, and interoperability with Canadian military systems.