This Government Contract opportunity from Tennessee was posted on October 3, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture of 4-Cubic-Yard Front-Load Waste Containers

Closed

State & Local

Submission Closed10/10/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332420

New

DIBBS

CYLINDER, COMPRESSED GA

Solicitation # SPE4A6-26-T-36NB

Solicitation SPE4A6-26-T-36NB is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 20 empty 50 lb refillable compressed gas cylinders, identified by NSN 8120-01-623-4014. The requirement specifies a delivery timeframe of 165 days after the order, with a need ship date of March 17, 2027, and an original required delivery date of June 13, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance under MIL-STD-105/ASQ Z1.4. Offerors must submit quotes through the DLA Internet Bid Board System (DIBBS) and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A5-26-T-472X

Solicitation SPE4A5-26-T-472X is a total small business set-aside issued by DLA Aviation for the procurement of 93 drained and empty 45-minute 30-year compressed gas cylinders, identified as NSN 8120016995561 and Scott Technologies, Inc. part number 804722-31-D. This commercial off-the-shelf item is subject to a delivery lead time of 166 days, with a required delivery date of March 31, 2027, and a need ship date of March 17, 2027. Delivery is FOB Origin, with the destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including Compressed Gas Association TB-17-2000 for cylinder treatment and painting. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific acceptance quality levels for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with additional requirements for DOT domestic shipments and UN international requirements for exports. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CFA-686 Carbon-based Fuels Capability - CO2 Storage Vessel

Solicitation # INL-26-056

Battelle Energy Alliance, LLC, acting as the Management and Operating Contractor for the Department of Energy's Idaho National Laboratory, is seeking Expressions of Interest for the design, fabrication, testing, and inspection of the V-738 pressure vessel. This vessel is a 200 cubic foot, ASME BPVC Section VIII, Division 1 code U-stamped unit intended for gaseous CO2 service within the Central Facilities Area Carbon-based Fuels Capability. The horizontal vessel will be constructed from 304/304L stainless steel with a design pressure of 1,800 psig and a temperature range of -40 to 500 degrees Fahrenheit. It features a 36-inch inner diameter, seven nozzles, nine band heating elements, and Foamglas insulation with aluminum sheathing. The unit must be designed for static, seismic, and wind loading per IBC 2024, ASCE 7-10, and ACI 318-19 to withstand the high desert environment of Idaho. The procurement process begins with this Expression of Interest to identify qualified vendors, with selected firms invited to a subsequent Request for Proposal for a firm-fixed price contract. Qualified offerors must possess a current U-stamp certificate, demonstrate expertise in stainless steel welding with 100 percent radiography, and provide a comprehensive quality control system meeting ASME BPVC Section VIII Division 1 Mandatory Appendices 10 and 47. The total project duration is 28 weeks after receipt of order, encompassing design, fabrication, and delivery to the Idaho National Laboratory. Interested firms must submit a qualification package of no more than five pages to Chase Egbert by October 16, 2026, detailing their technical capabilities, inspection plans, and availability of experienced project and quality control management.

Battelle Energy Alliance–doe Cntr

POSTED

DEADLINE

ADAPTER, COMPRESSED GAS

Solicitation # SPE4A6-26-T-35RC

Solicitation SPE4A6-26-T-35RC is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 16 compressed gas cylinder valve adapters, identified as National Stock Number 8120007766443. These adapters are commercial off-the-shelf items designed for high pressure nitrogen gas valve connections. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332420. The required delivery date is March 28, 2027, with shipping terms set as FOB Origin and delivery to DLA Distribution Cherry Point, North Carolina. The contract mandates strict adherence to quality and safety standards, including the submission of approved Safety Data Sheets and OSHA Hazard Warning labels prior to award. Packaging and marking must comply with MIL-STD-129 and DOT requirements, while sampling will follow MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and cybersecurity protections under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Special Shaped Aluminum Structural Sections (PN LS7237)This subcontract involves the supply of 235 specialized aluminum structural sections, specifically part number PN LS7237, for prime contractors working on DLA Troop Support projects. The components must be manufactured using Aluminum Alloy 2024 / T-4, with required lengths between 10 to 12 feet and a weight of 0.020 LB/FT. The contract is managed by the Department of Defense through the agency at Warner Robins, with performance taking place at Robins Air Force Base. To be eligible, providers must ensure full compliance with DFARS 252.204-7012 and CMMC Level 2 standards. The response deadline for this opportunity is October 2, 2026.

POSTED

DEADLINE

Solicitation # SPE8ED-26-T-1412

DLA Troop Support is soliciting quotes for the procurement of eight liquid storage tanks under solicitation number SPE8ED26T1412. The items must be delivered to DLA Distribution Jacksonville within 246 days after the order is placed. The approved source for this requirement is identified as 66618 8000050500, and the procurement falls under NAICS code 332420. This is a combined type solicitation available exclusively as an electronic RFQ, with a response deadline of September 28, 2026. All responsible sources are invited to submit electronic quotes. No hard copies of the solicitation, specifications, plans, or drawings are available. Inquiries should be directed to the buyer via the DIBBS portal.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

1,000-Gal Stainless Steel Vacuum Tanks

Solicitation # 63-ARM1202926

North Carolina State University is soliciting quotes for two 1,000-gallon stainless steel vacuum tanks to be used in a laboratory Mach-7 Reflected Shock Tunnel for research purposes. The tanks must be constructed from 304 or 316 stainless steel for outdoor use and be rated for pressure between -14psi and +15psi. Technical specifications require a bottom drain port of at least 6 inches, at least two 1-inch NPT ports, and specific Raised Face Slip On flanges for size 10 and size 4 pipes at designated heights and orientations. All pressure vessels must comply with ASME standards, and the supplier is required to obtain drawing approval from the Principal Investigator prior to fabrication. Bids must be submitted via the Bonfire Public Portal by September 30, 2026, and must include data sheets, brochures, or descriptive literature. Evaluation is based on the most advantageous bid, with a price-matching preference available for North Carolina resident bidders who are within 5 percent or 10,000 dollars of the lowest nonresident quote. Payment terms are Net 30 days following the receipt of a correct invoice or acceptance of goods. The university reserves the right to perform inspections at the bidder's site to ensure equipment conforms to specifications before the contract award or during the contract term.

North Carolina State University

POSTED

DEADLINE

Hot Water Storage and Expansion Tank SupplyThis subcontract involves the procurement and delivery of commercial-grade domestic hot water storage tanks and expansion tanks for prime contractors working on Iowa Department of Administrative Services projects. The equipment must be delivered to the Newton Correctional Facility and strictly adhere to the specifications outlined in the Project Manual dated September 9, 2026. The solicitation was posted on September 11, 2026, with a response deadline of October 6, 2026. Classified under NAICS code 332420, the contract is managed by the state of Iowa and requires the supplier to ensure all specified equipment is delivered directly to the facility site.

POSTED

DEADLINE

Aviation Fuel Tank Cleaning and PreservationThis subcontract opportunity with the Department of Homeland Security's Sflc Procurement Branch 1 involves the specialized cleaning, internal inspection, and preservation of aviation fuel service tanks for U.S. Coast Guard vessel projects. The selected provider will be responsible for cleaning tanks and completing Tank and Void Assessment Sheets in accordance with SFLC-ESD-25 standards, which includes documenting structural data and providing photography. Due to the nature of the work, the contractor must possess the necessary certifications and equipment for confined space entry. The project is located in Pensacola, Florida, and is designated as a total Small Business Set Aside under NAICS code 332420. Final deliverables for the contract include cleaned tanks, detailed assessment sheets, and comprehensive preservation reports. Interested parties must submit their responses by October 2, 2026.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

RFQ - Design Build – McCallum Replacement Diesel Tank

Solicitation # 109259 MG

Newfoundland Labrador Hydro has issued a Request for Quotation (RFQ 109259 MG) for the design-build replacement of a diesel storage tank at the McCallum Diesel Plant in Newfoundland and Labrador. The project involves the decommissioning and removal of an existing 90,000L vertical tank and the design, fabrication, and installation of two new 12,000L horizontal diesel tanks with a shared steel support platform, totaling a 24,000L capacity. The work is expected to take approximately 12 months, with a required completion date no later than August 31, 2027. The scope includes site services, engineering support, and ensuring operational continuity by transferring clean fuel into temporary storage during construction. All designs must be authenticated and stamped by a professional engineer as per PEG-NL standards. The contract will be awarded to the top-ranked respondent based on a combined score of non-price rated criteria and pricing, with a total weighting of 100 points. Non-price evaluation focuses on construction and design experience, specifically prioritizing contractors with expertise in remote communities, diesel tanks, and coastal environments. Pricing accounts for 70% of the total score and is evaluated using a relative formula. Mandatory requirements include ISNetworld (ISN) registration with a minimum grade of B, compliance with Bill S-211 regarding forced and child labour, and the submission of a detailed construction schedule. Bidders must also adhere to strict quality assurance protocols; while fabrication facilities are expected to be ISO 9001 certified, a bidder's own QA program is an acceptable alternative if submitted with the bid. Submissions must be uploaded via the specified electronic bidding portal by the deadline of October 7, 2026.

Newfoundland Labrador Hydro

POSTED

DEADLINE

MEVE - 14959 - Paint Morefield TankThe Department of the Interior is forecasting a contract for the repair and repainting of a 300,000 gallon domestic water tank located at the main Morefield visitor use area. This project falls under NAICS code 332420 and is intended to maintain critical water infrastructure for the site. The opportunity was posted on September 2, 2026, and is currently listed as a forecast. Amanda McCutcheon serves as the primary point of contact, with additional support provided by the National Park Service Contract Support Center.

POSTED

DEADLINE

0.5 MG Elevated Water Tank ConstructionThis subcontract involves the fabrication and installation of a 0.5 million gallon elevated water tank for the City of Davis water division. The project, located at the Parks and Community Services Corp Yard in Davis, California, encompasses the full scope of work including structure fabrication, hoisting, erection, and both interior and exterior coating. All work must be performed using seismic-compliant steel and concrete materials and heavy-lift cranes in strict adherence to current building codes and seismic design standards. The final deliverable is a fully installed and tested water tank. Interested parties must submit their responses by the deadline of October 5, 2026. The project falls under NAICS code 332420 and is managed under the jurisdiction of the City of Davis in California.

City of Davis

POSTED

29 days ago

DEADLINE

in 9 days

General Info

Agency

Tennessee → City of Johnson City

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

TN, USA

Set-Aside

NONE

Documents

This scope was carved out of ITQ 2025-25.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ITQ 2025-25 Waste Containers

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 3

subcontract

Response DeadlineOct 10

Deadline has passed

Submission Closed

10/10/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → City of Johnson City

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → City of Johnson City

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication and delivery of 4-cubic-yard front-load waste containers meeting the same material, welding, and finish standards as larger units, including ANSI Z245 compatibility.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS