Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Diesel Engine Governors (NSN: 2910-01-373-2591)

Active

Federal

Response Deadline08/07/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the manufacture of a third variant of the diesel engine governor identified by NSN 2910-01-373-2591, requiring the development of a new configuration that may necessitate the creation of specialized tooling, updated re-certification processes, or supply chain adjustments due to component availability constraints. The work involves addressing potential risks tied to the limited supply of critical parts and ensuring the new variant meets all functional and regulatory standards without disrupting existing operational systems. The effort is under the Department of Defense through DLA Land At Aberdeen and is intended for performance at Aberdeen Proving Ground, Maryland, with a submission deadline of August 7, 2026. This subcontract opportunity targets manufacturers with proven expertise in precision engine components and the capacity to navigate complex certification and supply chain challenges associated with defense-critical hardware.

General Info

Manufacture third diesel engine governor variant with new configuration, addressing supply chain and certification challenges for DoD at Aberdeen Proving Ground.

Agency

Department Of Defense → DLA Land At AberdeenView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land At Aberdeen

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Land At Aberdeen

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Produce a third variant of diesel engine governor, possibly requiring new tooling, re-certification, or supply chain risk mitigation due to limited availability.

Similar Contracts

Same NAICS industry code

Nonmetallic Hose Assembly SupplyThe contract entails the supply of twenty-four nonmetallic hose assemblies identified by NSN 4720000430902, all of which must fully comply with applicable military specifications, packaging standards, and hazardous material handling protocols. These assemblies are critical components intended for use within defense logistics and must be manufactured and packaged to meet stringent government requirements for durability, safety, and interoperability across military systems. The solicitation is categorized as a subcontract under NAICS code 332994, indicating it falls within the category of other fabricated metal product manufacturing, and is managed by the Maritime Supply Chain under the Department of Defense. The opportunity was posted on July 24, 2026, with a firm response deadline of July 29, 2026, allowing vendors five business days to submit proposals. While no specific procurement set-aside designation is provided, the contract is open to qualified subcontractors capable of fulfilling the technical and regulatory obligations. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal for registered bidders. Compliance with hazardous materials regulations is mandatory, requiring precise documentation and handling procedures throughout production, packaging, and shipping to ensure adherence to federal and DoD safety mandates.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOUNT, RESILIENT, WEAPONThe contract is for the procurement of 306 units of a resilient weapon system mount, identified by NSN 5342-01-353-5216 and part number 2HL527, supplied by OSHKOSH DEFENSE LLC. The item is classified as a TYPE I (CODE Z) shelf-life item with a non-extendable shelf life of 240 months, and compliance with shelf-life requirement RS001 is mandatory. Packaging must adhere to MIL-STD-2073-1E with specific packaging codes and procedures, including unit packaging as A1, intermediate containment as E5, and packaging code U. Marking is required per MIL-STD-129 with special code 32 indicating the Type I shelf-life classification, and palletization must meet DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity must be delivered within 168 days from the award date. The contract permits no variance in quantity, and the required delivery date is June 12, 2027, with a need ship date of January 5, 2027. The delivery address is DLA Distribution Red River in Texarkana, TX, and transportation follows DLA procedural notes C19 and C20. The solicitation number is SPE7L5-26-T-4354, issued under a federal procurement with NAICS code 332994, and the procurement is managed by the Department of Defense’s Land Supplier Operations Engines office, with Bradley Evans as the primary point of contact.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

CARRIAGE, HOWITZERThe contract pertains to the procurement of 22 units of a Howitzer Carriage identified by NSN 1015-00-616-7318, with a delivery timeline of 154 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is classified as a Category I munitions item requiring demilitarization, and its technical data is subject to export controls under ITAR or EAR, necessitating strict compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and prior authorization from DLA. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by an accredited third-party assessor. Quality assurance includes tailored higher-level requirements, inspection and acceptance at origin, configuration change management via engineering change proposals, and adherence to Qualified Products or Manufacturers Lists where applicable. Items must be physically marked according to specified standards, and unauthorized government identification must be removed from non-accepted supplies. Packaging must meet DLA standards, and while unique item identification is not required, DFARS 252.211-7003 applies. The contract is issued under solicitation SPE7L7-26-Q-2062 by the Department of Defense’s New Cumberland facility, with Charles Duncan as the point of contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

GUARD, HAND, GUNThe contract calls for the supply of nine guard, hand, gun units identified by NSN 1005-00-856-2108, with delivery required within 66 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is classified as a Category I munitions item under DoD 4160.28 Volume 3, requiring demilitarization upon disposal. Export control restrictions apply due to technical data subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. companies, and mandating compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. The contractor must adhere to DLA packaging standards, implement tailored higher-level quality requirements, manage configuration changes via engineering change proposals or variance requests, and ensure components originate from qualified products or manufacturers listed per procurement note H02. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Cybersecurity compliance requires a CMMC Level 2 self-assessment or certification by a C3PAO. Item Unique Identification is waived per the service customer’s request, in accordance with DFARS 252.211-7003. The solicitation was issued on July 24, 2026, with responses due by August 3, 2026, and performance is directed to New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

First Stage Cylinder Liner Repair/ReplacementThe contract calls for the repair or replacement of the first stage cylinder liner with part number 37560927 for a high-pressure air compressor, encompassing full operational procedures including disassembly, thorough inspection, precision machining, reassembly, and rigorous testing to ensure performance and safety standards are met. All work must be performed to meet military-grade specifications and maintain the integrity of the compressor system under high-pressure operational conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance required at the location in San Diego, California, specifically at zip code 92136. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM. The North American Industry Classification System code 332994 applies, indicating the work falls under other fabricated metal product manufacturing, and the effort supports critical defense infrastructure requiring specialized technical expertise and compliance with federal maintenance protocols.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Manufacture of Diesel Engine Governors (NSN: 2910-01-368-9883)The contract solicits the manufacture or requalification of a specific diesel engine governor identified by NSN 2910-01-368-9883, a component critical to military diesel engine systems. Due to obsolescence or the absence of original manufacturer support, the work may require reverse-engineering to reproduce or restore the governor to functional specifications, demanding advanced technical expertise in mechanical systems and component replication. The nature of the task necessitates adherence to military-grade standards and the ability to validate performance under operational conditions without reliance on original documentation or tools. The opportunity is structured as a subcontract and is open for responses until August 7, 2026, with the work to be performed at Aberdeen Proving Ground, Maryland, 21005. The NAICS code 332994 indicates the activity falls under Other Fabricated Metal Product Manufacturing, emphasizing the precision machining and fabrication requirements. The contracting entity is the Department of Defense, specifically under DLA Land at Aberdeen, affirming the defense-critical nature of the component and the strict quality and supply chain requirements associated with military logistics. Bidders must be prepared to demonstrate capability in restoring legacy systems under conditions of limited or no original source data.

DLA Land At Aberdeen

POSTED

DEADLINE

Manufacture of Diesel Engine Governors (NSN: 2910-01-368-7644)The contract requires the design, manufacture, and supply of diesel engine governors specifically for military tactical quiet generators, adhering strictly to the original technical specifications and traceability standards mandated for defense applications. The item is identified by the National Stock Number 2910-01-368-7644 and falls under the NAICS code 332994, indicating a focus on other fabrication services. Performance of the work is tied to Aberdeen Proving Ground with a zip code of 21005, underscoring the location where the governors will be utilized or tested. The contract is classified as a subcontract under the Department of Defense, administered by DLA Land at Aberdeen, and is open to qualified suppliers seeking to support critical military logistics and equipment readiness. All proposals must be submitted by the deadline of August 7, 2026, at 9:00 PM Eastern Time, with the solicitation posted on July 24, 2026. There is no set-aside designation specified, meaning eligibility is not restricted by small business or other categories. Traceability of components and adherence to military-grade engineering standards are non-negotiable requirements, ensuring full compliance with defense supply chain integrity. The absence of a point of contact or solicitation number suggests the details will be provided to applicants through the official SAM.gov workspace link, where full documentation and submission instructions can be accessed. This contract supports the sustained operational capability of tactical generator systems used in field deployment scenarios.

DLA Land At Aberdeen

POSTED

DEADLINE

Hydraulic System Integration and TestingThe contract pertains to the integration of a mulcher with hydraulic systems, requiring comprehensive flow compatibility testing, precise pressure calibration, and full performance validation to ensure operational reliability under field conditions. The work must be performed at Twentynine Palms, California, with all technical activities aligned to meet military-grade standards for equipment functionality and safety. The contractor is expected to demonstrate proven expertise in hydraulic system design and field testing, with deliverables focused on verified performance metrics and documented test results. This is a total small business set-aside under the SBA program, classified under NAICS code 332994, and structured as a subcontract within the Department of Defense acquisition framework. The opportunity was posted on July 24, 2026, with responses due by July 29, 2026, allowing a five-day window for qualified small businesses to submit proposals. The commanding general's office is managing the solicitation, and while no point of contact is listed, submissions must adhere strictly to the deadline and performance requirements outlined in the solicitation context. All work must comply with federal contracting regulations and be executed within the specified geographic location.

Commanding General

POSTED

DEADLINE

Propane Cannon System Supply and IntegrationThe contract entails the supply and integration of 26 complete bird propane cannon systems, each comprising the cannon unit, mounting hardware, control unit, proprietary software, cabling, and all necessary integration components to ensure full operational capability. These systems are designed for avian deterrent use and must be delivered in a ready-to-deploy configuration, fully tested and compliant with performance specifications. The contract is classified as a subcontract under NAICS code 332994, indicating it involves other fabricated metal product manufacturing, and is issued by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense. Responses are due by 9:00 AM on July 28, 2026, following a posting date of July 24, 2026, with performance to occur at the Sigonella location. The requirement is focused on delivery and integration without specifying set-aside status, and all components must be compatible with existing infrastructure and operational environments at the site. No point of contact is listed in the provided details, and the contract is accessible via the SAM.gov portal for potential bidders seeking to submit proposals.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

SPRDL1-24-R-0189_0007 Receiver, CartridgeThis Amendment 0007 to solicitation SPRDL1-24-R-0189 extends the deadline for submitting offers to August 13, 2026, at 3:00 PM Eastern Time, with the purpose of allowing additional time for potential responders to prepare and submit their proposals. All other terms and conditions of the original solicitation remain unchanged and fully enforceable. The solicitation is for a Receiver, Cartridge under NAICS code 332994, issued by the Defense Logistics Agency Land Warren, part of the Department of Defense, with the office located in Warren, Michigan. The primary point of contact for inquiries is Travis Kelly, reachable via email at travis.kelly@dla.mil or phone at 385-591-2859. Responses must be submitted through the SAM.gov portal linked in the solicitation details.

DLA Land Warren

POSTED

DEADLINE

FIXTURE,GUN ASSEMBLThis contract pertains to the procurement of the FIXTURE, GUN ASSEMBL under solicitation SPRMM126QKG32, issued by the Defense Logistics Agency (DLA) Mechanicsburg. All contractual documents are deemed issued upon electronic transmission or mailing, and award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. The item must conform to specified military standards including MIL-STD-130 Revision N for marking, and packaging must comply with MIL-STD-2073. The contractor is responsible for all inspection activities as detailed in the contract, with records required to be maintained for 365 days after final delivery. The contractor must be an authorized distributor of the original equipment manufacturer, and refurbished materials are strictly prohibited. Traceability to the OEM is mandatory, requiring the provision of the CAGE code and part number for any non-manufactured items. Electronic submission of invoices and receiving reports via the Wide Area Workflow (WAWF) system is required, and contractors must register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) to view orders. Compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 1 is mandatory, and the Federal Acquisition Supply Chain Security Act prohibitions apply. Any changes to the design, material, or part number require prior written approval from the Contracting Officer, with specific change codes to be applied and justification submitted. The performance facility cannot be altered without government approval, and administrative fees of $250 apply for any approved changes. Documentation required for performance must be obtained from authorized sources, and distribution of technical data is governed by seven code-based distribution statements, with strict controls on access. Contact information for contract-related communications must be provided, and vendors are encouraged to register with NAVSUP WSS to receive automated notifications regarding contract actions.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land At Aberdeen

Same awarding agency

Obsolescence Management and Lifecycle Support ServicesThe contract requires the provision of ongoing obsolescence monitoring, component substitution planning, and supply chain continuity strategies specifically for critical diesel engine governors, ensuring uninterrupted operational capability for defense-related systems. The work entails identifying components at risk of discontinuation, evaluating viable alternatives, and implementing proactive mitigation plans to sustain functionality amid evolving market conditions and supplier changes. All activities must align with stringent military standards and maintain compatibility with existing platforms used at Aberdeen Proving Ground. This subcontract is issued under NAICS code 541690 for other scientific and technical consulting services and is managed by the Department of Defense through DLA Land at Aberdeen. The opportunity was posted on July 24, 2026, with a response deadline of August 7, 2026. Performance is expected to occur primarily at Aberdeen Proving Ground, Maryland, and the contractor must demonstrate expertise in lifecycle management for complex mechanical systems, with an emphasis on ensuring long-term reliability and availability of mission-critical governor components despite supply chain disruptions or technological obsolescence.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Technical Data Package (TDP) Development and LicensingThe contract calls for the development or restoration of technical drawings, test procedures, and data rights packages for obsolete diesel engine governors, with reverse engineering permitted when original documentation is unavailable. This effort is focused on preserving critical technical knowledge for systems no longer supported by current manufacturers, ensuring continued operational capability and maintenance of legacy equipment. The work must produce fully compliant technical data packages that meet military standards for accuracy, completeness, and usability in repair and overhaul environments. The contract is issued as a subcontract under the NAICS code 541330 for engineering services and is managed by the Department of Defense through DLA Land at Aberdeen. Performance is required at Aberdeen Proving Ground with a zip code of 21005. All proposals must be submitted by August 7, 2026, and the solicitation was posted on July 24, 2026. No set-aside provisions are specified, and the contract aims to secure specialized technical expertise to recover lost or degraded technical data essential for sustaining legacy diesel engine systems in defense applications.

Engineering Services

POSTED

DEADLINE

Market Survey for the procurement of NSN 2910-01-368-7644, 2910-01-373-2591, 2910-01-368-9883 (GOVERNOR, DIESEL ENG;) for TQG-Engine Fuel System Components.The Defense Logistics Agency-Aberdeen is conducting a market survey to identify capable sources for the procurement of three diesel engine governor parts—NSNs 2910-01-368-7644, 2910-01-368-9883, and 2910-01-373-2591—used in the Tactical Quiet Generator (TQG) fuel system. These governors are critical components supporting TQG diesel generator sets that provide reliable, low-noise electrical power for military operations in austere environments, including command posts, communications, and weapon systems. The government requires these parts for initial production with estimated quantities of 105, 7, and 7 units respectively, but does not hold the technical data package and has not procured these items since 2014, indicating a need to reestablish supply sources. Responses are requested from manufacturers or suppliers who can demonstrate the ability to produce or supply the specified governors, including their part numbers 8270-1002 and 664543C, with CAGE code 31361. Submitters must provide documentation on past performance, test results, technical drawings, data rights, and prior government or commercial contracts, along with their company name, CAGE code, and technical contact information. This notice is strictly for market research and planning purposes, with no commitment to award a contract or reimburse response costs. Responses are due by August 7, 2026, and must be submitted via email to the designated technical and small business contacts; no phone inquiries are accepted. The information gathered will assess industry capability, support acquisition strategy decisions, and determine potential for competitive or small business set-aside contracts.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Test Equipment and Quality Verification SupportThe contract titled Test Equipment and Quality Verification Support is a subcontract issued by the Department of Defense through DLA Land At Aberdeen, targeting the verification of kit component functionality through proper application of test equipment. The work is centered at Aberdeen Proving Ground with a ZIP code of 21005, where the contractor will be responsible for identifying and deploying appropriate testing tools to ensure the quality and operational integrity of supplied components. The North American Industry Classification System code 541380 indicates that this effort falls under engineering services, emphasizing technical validation and verification expertise. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, at 9:00 PM Eastern Time, requiring timely submission from interested parties. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or status. The contract does not include a designated point of contact, and while the physical office address details are incomplete, performance is clearly localized to the Aberdeen Proving Ground location. All submissions must be made through the provided SAM.gov platform link to be considered.

Testing Laboratories and Services

POSTED

DEADLINE

Obsolescence Management & Engineering SupportThe contract involves providing engineering analysis and lifecycle management services to identify, qualify, and document alternate sources for obsolete components within a cleaning kit. The work is focused on ensuring continued operational readiness by addressing component obsolescence through technical evaluation, supplier qualification, and thorough documentation of viable replacements. This effort is critical for sustaining equipment functionality without disruption due to discontinued or unavailable parts. The contract is classified as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. It is administered by the Department of Defense through DLA Land At Aberdeen, with performance required at Aberdeen Proving Ground, Maryland, 21005. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, at 9:00 PM Eastern Time. While no set-aside details or point of contact are specified, the activity is part of a broader defense logistics initiative to maintain supply chain resilience for essential support equipment.

Engineering Services

POSTED

DEADLINE

Optical Alignment Sleeve SupplyThe contract involves the supply of 50 replacement 2.5mm alignment sleeves per kit, specifically designed to be compatible with TFOCA and single-fiber optic systems, ensuring precise optical alignment in military-grade applications. The requirement is issued as a subcontract under the NAICS code 334511, which pertains to the manufacturing of electronic components and accessories, indicating the technical nature of the product and the need for precision engineering capability. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, at 9:00 PM, leaving a seven-day window for interested vendors to submit proposals. The place of performance is identified as Aberdeen Proving Ground with a ZIP code of 21005, and the contracting entity is the DLA Land At Aberdeen under the Department of Defense, underscoring the defense and tactical significance of the component. There is no set-aside designation specified, meaning the solicitation is open to all qualified contractors regardless of business size or status, and no point of contact details are provided within the public posting.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Precision Hand Tool Supply (Miniature Screwdriver & Needle-Nose Pliers)The contract seeks the supply of miniature screwdrivers and needle-nose pliers designed to meet military-grade specifications for integration into a fiber optic cleaning kit. These precision hand tools must adhere to stringent durability, performance, and quality standards required for use in defense and aerospace applications, ensuring reliability under demanding field conditions. The tools are intended for use at Aberdeen Proving Ground, Maryland, where they will support critical maintenance and operational tasks involving sensitive optical equipment. Subcontractors must submit proposals by the deadline of July 31, 2026, and the solicitation falls under NAICS code 332215, which categorizes the manufacturing of hand and edge tools. The contracting activity is managed by the DLA Land at Aberdeen under the Department of Defense, emphasizing the federal and defense-oriented nature of the procurement. While no specific set-aside designation is listed, the contract is structured as a subcontract, indicating it may be part of a larger program or system integration effort. All suppliers are expected to fulfill technical requirements without deviation and ensure compatibility with existing military-grade cleaning kit configurations.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Fiber Optic Cleaning Kit Manufacturing and AssemblyThe contract calls for full production, kitting, and assembly of the Fiber Optic Cleaning Kit model 0831-1000, ensuring all components meet strict military form, fit, and function standards. The work involves sourcing, integrating, and final assembly of every part required to deliver a fully compliant kit, with quality and precision aligned to defense specifications. The kit must be prepared for immediate deployment in field conditions without additional modification. The contract is advertised as a subcontract opportunity under NAICS code 339920, with a response deadline of July 31, 2026, and a posting date of July 23, 2026. Performance will occur at Aberdeen Proving Ground, Maryland, 21005, under the oversight of the Department of Defense via DLA Land At Aberdeen. The effort requires precise adherence to military requirements, and suppliers must be prepared to validate all processes and materials for compliance prior to delivery.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Sources Sought Announcement for Enhanced Position Location Reporting System (EPLRS) ComponentsThe Defense Logistics Agency-Aberdeen is conducting a sources sought announcement to identify capable suppliers for the battery case assembly, part number A3159263, NSN 6160-01-348-2410, used in the Enhanced Position Location Reporting System (EPLRS), a secure, jam-resistant tactical communications network. This item is a critical component that houses the lithium-ion BA1372/U primary battery, and the Government holds the full Technical Data Package (TDP) at Level 3 production detail, which is available for release under strict conditions. The solicitation number is DLA-Aberdeen-26-052, and responses are due by July 14, 2026, to be submitted exclusively via email to the primary point of contact, Joseph W. Frye, and secondary contact Jacob Sparr, with no telephone inquiries permitted. The action is strictly for market research and planning purposes; no contract award, reimbursement, or financial commitment will result from this announcement, and it is not a request for quote or proposal. Respondents must provide their company name, CAGE code, technical point of contact details, completed contractor questionnaire, demonstrated First Article Testing capabilities and results, and history of prior government contracts to establish capability. Access to the TDP requires active participation in the Defense Logistics Agency Joint Certification Program with a valid DD2345, a signed Non-Disclosure Agreement, and verification through the System for Award Management. The data is controlled under International Traffic in Arms Regulations and may not be disclosed to non-U.S. persons or used for unauthorized purposes, including reverse engineering, decompiling, or disassembly. The NAICS code is 335910, and the Government is evaluating whether this requirement can be competitively sourced or set aside for small business. All requests for the TDP must be made within seven days of posting to the designated DLA inbox to allow time for JCP status verification and compliance processing.

Battery Manufacturing

POSTED

DEADLINE

Market Survey for Procurement of Spares in Support of the Secure Mobile Anti-Jam Reliable Tactical (SMART-T) Program.The Defense Logistics Agency-Aberdeen, acting on behalf of the Army Integrated Logistics Supply Center’s Strategic Sourcing Directorate, is conducting a market survey to assess industry capability to manufacture the Fiber Optic Cleaning Kit, Part Number 0831-1000, designated by NSN 6070-01-734-1554, for use in supporting the Secure Mobile Anti-Jam Reliable Tactical (SMART-T) system. This kit includes a miniature screwdriver with a 3/32-inch magnetic bit, needle-nose pliers, and 50 replacement alignment sleeves to enable maintenance personnel to clean and repair single fiber and TFOCA 2.5mm end-faces. The Government does not possess the technical data package for this part and is relying on existing physical samples or legacy procurement records to define specifications. This effort is a follow-on to a prior small-scale procurement in early 2026 for training purposes, and the current survey seeks to determine if responsible sources exist to support future production. Responses are required via a Contractor Questionnaire that demands detailed information on company capability, past performance, engineering qualifications, obsolescence management, test equipment experience, and procurement flexibility for spot buys or fixed quantity orders. All responses must include the company name, CAGE code, and a technical point of contact with email and phone number. The survey is strictly for planning and market research and does not constitute a solicitation for offers or a commitment to award a contract, nor will the Government reimburse any costs associated with response preparation. Responses are due by July 31, 2026, and must be submitted exclusively by email to the designated technical and small business contacts at Aberdeen Proving Ground, Maryland, which is also the designated place of performance. The Government will use the information gathered to evaluate competition potential, assess small business participation, and determine the optimal acquisition strategy for a future procurement action.

POSTED

DEADLINE