Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Metal Staples (Stamped Fasteners)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 32 boxes of metal staples in strict compliance with DLA technical and quality standards, covering the full production cycle from raw material sourcing through stamping, finishing, packaging, and labeling. All work must meet defined specifications to ensure consistency and reliability for military use, with a focus on precision and durability in the final product. The production is governed by NAICS code 332510, indicating it falls under the category of forging and stamping operations for metal components. Performance is designated to occur at Robins Air Force Base, Georgia, with a delivery deadline of August 10, 2026, and the solicitation closed on August 2, 2026. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, intended to support defense logistics requirements. While no specific set-aside status or point of contact is provided, interested suppliers must ensure full adherence to DLA’s quality protocols and timely fulfillment to meet operational needs at the specified location.

General Info

Manufacture 32 metal staple boxes to DLA standards for delivery at Robins AFB by August 10, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 32 boxes of metal staples per DLA technical and quality standards, including raw material sourcing, stamping, finishing, packaging, and labeling.

Similar Contracts

Same NAICS industry code

Supply of Angle Brackets (NSN: 5340016060220)The contract entails the procurement and delivery of four units of Angle Brackets identified by NSN 5340016060220, requiring strict adherence to military specifications for design, quality, and performance. All items must be properly packaged and labeled in compliance with federal regulations and delivery standards to ensure seamless integration into defense logistics systems. The delivery location is specified as New Cumberland, Pennsylvania, with the zip code 17070-5002, and the order falls under the NAICS code 332510, corresponding to the forging and stamping industry sector. The contract is classified as a subcontract and was posted on August 2, 2026, with a response deadline of August 13, 2026. The procuring entity is the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES, and the solicitation can be accessed through the DIBBS system using the provided link.

LAND SUPPLIER OPNS ENGINES

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Clamping Catch (NSN 5340-01-705-5191)The contract requires the manufacture, quality assurance, packaging, and delivery of 20 units of a military-spec clamping catch identified by NSN 5340017055191 and part number 7014936806, with strict adherence to critical application and marking standards mandated for defense use. All work must comply with the technical and regulatory requirements associated with military-grade components, ensuring full traceability, durability, and performance under operational conditions. The product must be delivered to the specified place of performance in Poca, West Virginia, with a zip code of 25159-0000. The contract is classified as a subcontract under NAICS code 332510, which pertains to forging and stamping operations, and is issued by the Department of Defense through the Land Supply Chain organization. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, indicating a narrow window for proposals. The procurement is managed via the DIBBS platform with the RFQ identifier SPE7L126T904F, and while no set-aside designation is specified, full compliance with federal defense supply protocols is expected, including documentation, inspection, and certification requirements for every unit delivered.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Latch, Hood, Vehicula (NSN 2540015777498)The contract is for the manufacture or supply of a vehicular latch component identified by NSN 2540015777498, specifically a hood latch designed to meet strict military specifications and requirements set by the Defense Logistics Agency. All deliveries must adhere to FOB origin terms with an 80-day lead time, ensuring timely fulfillment of individual delivery orders under the broader contract framework. The work is subject to full compliance with federal acquisition regulations and military quality standards, with the component intended for use in defense vehicles. This is a total small business set-aside under the SBA program, with the North American Industry Classification System code 332510 indicating the contractor must be a small business engaged in forging, stamping, and related metalworking. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, under the DLA’s Land Supply Chain organization within the Department of Defense. The contract will be awarded as a subcontract and all performance is expected to align with DLA’s logistics and supply chain protocols, despite no specific place of performance or point of contact being enumerated in the data.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Precision Machining of Engine Accessory BracketThe contract calls for the manufacture of 101 precision-engineered BRACKET, ENGINE ACCESSORY units identified by NSN 5342012529503, to be produced in full compliance with Department of Defense and Defense Logistics Agency standards. The work encompasses all phases of production including material sourcing, precision machining, surface finishing, and secure packaging, ensuring each unit meets stringent military specifications for performance, durability, and reliability. The production must be executed under a Total Small Business Set-Aside as defined by FAR 19.5, restricting eligibility exclusively to small businesses certified under the SBA program, with the NAICS code 332510 classifying this activity under Machine Shops. Performance of the contract is designated to take place at a location in Anniston, Alabama with the zip code 36201-4199, and the solicitation falls under the procurement jurisdiction of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and is structured as a subcontract. All interested small business vendors must submit their proposals through the DIBBS portal at the provided link prior to the deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Manufacture of Dust and Moisture Sealing BootsThe contract requires the manufacture of 439 military-grade sealing boots designed to prevent dust and moisture ingress, fully compliant with federal and military standards for packaging, labeling, and handling procedures. Production must adhere to traditional manufacturing methods, with a strict prohibition on additive manufacturing technologies. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 332510 identifies the relevant industry sector for metal forging, stamping, and manufacturing. All work is to be performed at the designated place of performance in Cherry Point, North Carolina, with a response deadline of August 13, 2026. The contracting activity falls under the Department of Defense through the Land Supply Chain organization, indicating the end-use is for military equipment and logistics systems.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Towbar Wheels (NSN 1730-00-072-8670)The contract requires the manufacture, packaging, and timely delivery of 118 Towbar Wheels identified by NSN 1730-00-072-8670, all of which must fully comply with military specifications including a 120-month shelf life under Type I, Code W requirements. The supplier must ensure the product meets all quality and durability standards set forth for military use and deliver the complete lot within 30 days to DLA Jacksonville. This is a small business set-aside contract under the SBA program, designated as a Total Small Business Set-Aside per FAR 19.5, with the North American Industry Classification System code 332510, indicating the work falls under the manufactured metal product category. The solicitation was posted on August 2, 2026, with responses due by August 5, 2026, and is structured as a subcontract under the Department of Defense, managed through the Construction & Equipment Manu & Con agency.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Key Chain and Reel UnitsThe contract involves the fabrication and assembly of key chain and reel units in strict compliance with military specifications, encompassing the full spectrum of production from raw material sourcing to precision manufacturing and rigorous quality control. All components must meet exacting standards for durability, functionality, and consistency required by defense operations, with particular emphasis on adherence to technical and procedural guidelines established for military-grade hardware. The work will be performed at a designated facility in Madison, Wisconsin, with the zip code 53704-4125 serving as the official place of performance. This is a subcontract opportunity under the NAICS code 332510, classified under the Department of Defense’s Land Supply Chain program, with a response deadline of August 13, 2026, and a posting date of August 2, 2026. While the solicitation number and point of contact are not detailed in the provided information, interested parties must submit their proposals prior to the deadline through the designated DIBBS platform. There is no specific set-aside designation indicated, meaning the contract is open to eligible general contractors capable of fulfilling the military-grade manufacturing requirements without restriction based on small business or minority status.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Swivel Caster Supply and DeliveryThe contract entails the procurement, packaging, labeling, and timely delivery of a single swivel caster identified by National Stock Number 5340-00-205-5610, which must fully comply with Defense Logistics Agency standards. The item is required to be delivered within 20 days of award, and all aspects of fulfillment—including packaging and labeling—must adhere to the specified military and logistical requirements to ensure readiness and integration into existing supply chains. The place of performance is designated as Fairfield, with a zip code of 52556-2208, indicating the final destination for the delivered unit. This is a subcontract under the NAICS code 332510, relating to bearing and gear manufacturing, solicited by the Land Supply Chain within the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, providing bidders with a window of 11 calendar days to submit proposals. The contract is accessible via a DIBBS platform link, and while no specific point of contact is listed, all communications are expected to be conducted through the official procurement portal. There is no set-aside classification defined for this solicitation, meaning all eligible vendors may compete without restriction.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Precision Machined Mounting Plate SupplyThe contract calls for the manufacture and delivery of a single precision-machined mounting plate identified by NSN 5340-01-716-2294 and Part Number 22-02993-00, with full compliance to applicable military specifications covering all aspects of production, including final packaging, labeling, and identification. The item is required to meet exacting defense standards and must be delivered to the specified performance location at Schofield Barracks, Hawaii, with ZIP code 96857-5200. This is a subcontract under the NAICS code 332510, which corresponds to forgings and stampings, and is issued by the Department of Defense through its Land Supply Chain organization. The solicitation was posted on August 2, 2026, and responses must be submitted no later than August 13, 2026, with no set-aside provisions designated for small or disadvantaged businesses. All deliverables must align with the technical and logistical requirements outlined for military-grade components, ensuring readiness for integration into defense systems.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-902K

The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L5-26-T-4732

The contract pertains to the procurement of one bracket, angle item with NSN 5340016060220 and purchase request number 7016785760, totaling four units across two line items—one unit and three units respectively—with a firm fixed price of $3.00 total and no quantity variance permitted. Delivery is required within 88 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, while hazardous materials require compliance with TQ requirement IP025. All items must be palletized per RP001 guidelines and packed with a quantity per unit pack of one. Two delivery addresses are specified: one for New Cumberland, Pennsylvania, and one for Barstow, California, with corresponding parcel post and freight shipping instructions. The required ship date is November 10, 2026, with the original delivery deadline set for January 25, 2027. Transportation directives reference DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L5-26-T-4732, categorized under NAICS code 332510, managed by the Department of Defense’s Land Supplier Operations Engines, with primary contact Bradley Evans.

LAND SUPPLIER OPNS ENGINES

POSTED

about 9 hours ago

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE4A5-26-T-319A

The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Transportation and Delivery to Tracy, CA (FOB Origin)The contract requires the secure transport of finished cable assemblies from the manufacturer to the DLA Distribution Depot in Tracy, California, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This includes managing secure handling procedures and maintaining full chain-of-custody tracking throughout the transportation process to ensure accountability and prevent loss or tampering. The delivery destination is clearly identified as the Tracy facility with a zip code of 95304-5000, and the work falls under NAICS code 484220, which classifies it as a freight transportation service. The contract is structured as a subcontract and was posted on August 2, 2026, with proposals due by August 10, 2026, under the oversight of the ASC Commodities Division within the Department of Defense. All activity must comply with federal logistics standards and be executed in alignment with the specified security and documentation protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires performance of origin-based quality inspections in accordance with ASQ Z1.4 and AQL standards, specifying critical defect limits at 0.1, major defects at 1.0, and minor defects at 4.0. All inspections must be thoroughly documented and supported to facilitate government acceptance, ensuring compliance with stringent quality benchmarks. The work is scoped as a subcontract under the Department of Defense’s ASC Commodities Division, with performance to occur at a designated location in Tracy, California, with a postal code of 95304-5000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and it is classified under NAICS code 811211, indicating a focus on repair and maintenance services. Participation is open without specific set-aside restrictions, and all activities must align with federal acceptance protocols for delivered commodities.

Consumer Electronics Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

Packaging and Labeling Services for Government ShipmentThe contract requires specialized packaging, marking, and labeling services fully compliant with MIL-STD-2073-1E, RP001, and applicable hazardous material regulations for government shipments. All work must adhere strictly to Department of Defense standards to ensure safe, secure, and traceable handling of critical materials throughout the supply chain. Services are to be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000, and must meet all federal requirements governing the preparation and documentation of military cargo. This subcontract, solicited under the NAICS code 561910, is issued by the ASC Commodities Division of the Department of Defense and is open for response until August 10, 2026. The posting date is August 2, 2026, allowing potential vendors eight days to submit proposals. The contract is not subject to any specific set-aside designation, and interested parties must access the official solicitation through the provided DIBBS portal to review full requirements and ensure alignment with all technical, regulatory, and logistical directives before submitting a bid.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture of four special-purpose electrical cable assemblies identified by NSN 6150-01-424-8044, all produced in strict compliance with military specifications. This includes full production, rigorous quality assurance protocols, and adherence to hazardous materials regulations to ensure safety and operational readiness. The work must be completed to exact technical standards expected for defense-related components, with no tolerance for deviations in design, materials, or performance. The solicitation is issued as a subcontract under the North American Industry Classification System code 334419, reflecting the specialized nature of electrical equipment manufacturing. It is managed by the ASC Commodities Division under the Department of Defense, with performance required at a facility located in Tracy, California, 95304-5000. Interested parties must submit responses by the deadline of August 10, 2026, following the guidelines outlined on the official DIBBS platform, with no information provided regarding set-aside status or small business preferences.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Specialized Material and Component SupplyThe contract entails the supply of specialized components and preservation materials critical for handling mercury-containing parts, with strict adherence to NAVSEA 5100-003D standards and the PRESV MAT:ZZ specification. The required items include shock-proof enclosures designed to ensure safe transportation and storage of sensitive hazardous materials, underscoring the need for robust engineering and compliance with military-grade safety protocols. All submitted materials must meet exacting technical criteria to guarantee compatibility, durability, and regulatory compliance in defense-related applications. The solicitation is issued as a subcontract under the NAICS code 335999, directed by the ASC COMMODITIES DIVISION within the Department of Defense, with performance required at NEW CUMBERLAND, PA, zipcode 17070-5002. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026. No set-aside classification or agency-specific procurement preferences are indicated, and bidders must ensure full technical alignment with the referenced standards without reliance on external documentation or file references. The contract is accessible via the DIBBS portal for detailed submission requirements.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data ManagementThe contract requires full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 for all hazardous materials used in the production and handling of defense hardware. This includes the authoritative preparation and maintenance of Safety Data Sheets for each chemical substance involved, ensuring accurate hazard identification, risk communication, and regulatory adherence across the supply chain. Hazard labeling must be implemented precisely according to GHS standards, covering containers, work areas, and any materials transferred or stored during manufacturing or logistics operations. All activities must be performed in alignment with Defense Department protocols under the ASC Commodities Division, with performance centered at the New Cumberland location, zip code 17070-5002. The solicitation, issued as a subcontract under NAICS code 541690, demands timely submission by the August 10, 2026 deadline, and is structured to support ongoing defense hardware programs where chemical safety and regulatory integrity are critical to operational readiness and worker protection.

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT) ServicesThe contract requests accredited First Article and Production Lot Testing services to ensure full compliance with specified drawings and contractual requirements, including the submission of detailed test reports and supporting compliance photos. The work is designated under NAICS code 541380 and is classified as a subcontract, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All testing must be conducted by accredited laboratories, and deliverables must meet stringent documentation standards to validate adherence to technical specifications.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Defense-Grade Marking and Barcoding ServicesThe contract requires the application of permanent, MIL-STD-129-compliant markings, barcodes, and hazard labels to military units and containers, with strict adherence to federal defense standards. A specific marking code, 'ZZ - ZZ', must be incorporated into the labeling process as mandated by the procurement authority. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a subcontract under the NAICS code 811411, indicating services related to industrial and commercial machinery and equipment repair and maintenance. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Compliance with all technical specifications, particularly those related to military labeling and hazard communication, is essential for qualified bidders to meet contractual obligations and ensure operational readiness.

Home and Garden Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, cleaning, drying, and sealing services for defense hardware in full compliance with MIL-STD-2073-1E and RP001 standards. All activities must ensure the long-term integrity and readiness of military equipment during storage and transit, with strict adherence to prescribed procedures for environmental protection, corrosion prevention, and contamination control. Comprehensive Final Acceptance Test documentation must be delivered to verify conformance to contractual requirements and military specifications. Work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. This is a subcontract opportunity issued under the Department of Defense’s ASC Commodities Division, classified under NAICS code 312230. The requirement is part of a broader effort to maintain defense supply chain readiness through standardized, validated packaging and preservation practices, and all vendors must demonstrate proven ability to meet stringent military logistics and documentation protocols.

Tobacco Manufacturing

POSTED

about 9 hours ago

DEADLINE

Defense-Grade Cable Assembly ManufacturingThe contract requires the full manufacturing of 26 mission-critical defense cable assemblies strictly in accordance with military specifications, encompassing every phase from fabrication and assembly to rigorous quality control, with zero tolerance for deviation or variance. Each unit must meet exacting defense standards to ensure operational reliability in high-stakes environments, and the work must be performed to specifications that leave no room for compromise in material selection, workmanship, or testing procedures. The production timeline is aligned with a tight deadline, and all deliverables must be finalized and certified prior to the bid response cutoff. The solicitation is classified as a subcontract under NAICS code 334419, issued by the ASC Commodities Division of the Department of Defense, with performance required at a designated facility in New Cumberland, Pennsylvania, ZIP 17070-5002. Bidders must submit their proposals by August 10, 2026, with the opportunity posted on August 2, 2026. There is no set-aside designation specified, and the contract is open to qualified subcontractors who can demonstrate proven capability in defense-grade cable assembly manufacturing. Any applicant must be prepared to provide full compliance documentation and rigorous quality assurance records to validate adherence to mandated military standards.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Defense Logistics and Freight Shipping (Domestic)The contract requires the transportation and delivery of packaged defense hardware to Ellsworth Air Force Base in South Dakota, with strict adherence to government freight documentation and WAWF-compliant invoicing procedures. All logistics must ensure secure, timely, and accurate handling of sensitive military cargo, with the final destination specified by the zip code 57706-4835. The NAICS code 484220 indicates this is a freight transportation services contract, specifically under the trucking and freight logistics sector. Issued as a subcontract by the ASC Commodities Division under the Department of Defense, the opportunity is open for responses until August 10, 2026, with postings effective August 2, 2026. Bidders must be prepared to meet federal shipping standards, including full compliance with electronic invoicing through the Wide Area WorkFlow system and proper documentation for government freight movement. While no set-aside designation is specified, potential contractors must be capable of supporting defense logistics requirements and coordinating directly with the Department of Defense’s supply chain operations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Defense Packaging, Labeling, and Hazard CommunicationThe contract requires comprehensive defense-compliant packaging and labeling of hardware in accordance with ASTM D3951 and MIL-STD-129 standards, ensuring all materials meet stringent military specifications for protection, identification, and handling. This includes the preparation of hazard communication documentation and MSDS to ensure safety compliance during storage, transport, and use. The work is subcontracted under the Department of Defense’s ASC Commodities Division, with performance specifically designated for Ellsworth Air Force Base, South Dakota, at ZIP code 57706-4835. The solicitation, posted on August 2, 2026, has a response deadline of August 10, 2026, and falls under NAICS code 561910 for other support activities for agriculture and mining. All deliverables must strictly adhere to federal defense requirements for packaging integrity, labeling accuracy, and hazardous materials communication.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE