Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Navigational Aircraft Lighting Components

Active

Federal

Response Deadline07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the full manufacturing, testing, and delivery of 24 units of a navigational aircraft light component identified by NSN 6220-01-443-3026, with strict adherence to military specifications governing labeling, packaging, and hazardous materials handling. All work must be completed in compliance with defense standards to ensure operational reliability and regulatory conformity. The component is critical for aircraft navigation systems and must meet exacting quality and performance criteria prior to acceptance. The contract is a subcontract issued by the ASC Commodities Division under the Department of Defense, with performance required at Hill AFB, Utah, zip code 84056-5734. The NAICS code 336320 indicates classification within aerospace manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 23, 2026, indicating a rapid procurement timeline. All submissions must align with the requirements detailed in the official DIBBS portal listing, and contractors are expected to handle all logistics, including hazardous material compliance and final delivery, without additional support.

General Info

Manufacture, test, and deliver 24 NSN 6220-01-443-3026 navigational lights per military specs by July 23, 2026, at Hill AFB, Utah.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full manufacturing, testing, and delivery of 24 units of a navigational aircraft light component (NSN 6220-01-443-3026), compliant with military specifications for labeling, packaging, and hazardous materials handling.

Similar Contracts

Same NAICS industry code

PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

LIGHT ASSEMBLY, INDICATThe contract pertains to the procurement of a Light Assembly, Indicator, identified by NSN 6220-01-502-7218 and part number 22506-001 from Korry Electronics Co, with a required quantity of three units. Delivery is due in 171 days, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including a special fragile marking code. Unit of issue is each, with a fixed unit price and no quantity variance permitted. Packaging and palletization follow DLA’s standardized requirements, and the item is not classified as hazardous, exempting it from SDS documentation. The item is designated as a Critical Application Item, and the technical data referenced, though incomplete, must still be fully met. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with undefined attributes treated as major and acceptance requiring zero non-conformances. The item is not required to have Unique Identification under DFARS 252.211-7003(c)(1)(i). Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a need ship date of January 17, 2027, and an original required delivery date of April 16, 2027. The solicitation, issued under SPE4A6-26-T-08DV, references DLA’s master list of technical and quality requirements and is governed by applicable revisions effective on the solicitation or award date, depending on acquisition type.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

ARMATURE, IGNITIONThe contract pertains to the procurement of one ignition armature and reluctor sleeve, specified for use on a Chrysler Model M880 truck cargo vehicle with a 1-1/4 ton capacity, identified by NSN 2920-01-003-5473 and purchase request 7017552671. The item must be delivered within five days of contract award, with delivery terms set at FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination location, and packaging must comply with ASTM D3951 while adhering strictly to all DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling must follow MIL-STD-129, and the unit of issue is a single unit. The shipment is directed to the U.S. Army at Building 8410, Edwards Road, Fort Riley, Kansas, under a RDD/NCMS shipment classification with transport guidelines specified in DLAD PROC NOTES C19 and C20. The contract is administered under solicitation SPE7L1-26-T-856W, with a required delivery date of July 20, 2026, and is subject to all technical and quality specifications referenced through the DLA Master List, including applicable revision control criteria based on acquisition size and amendment timelines. The point of contact for inquiries is Kristina Derry with the Department of Defense’s Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

POST ASSEMBLY, SUPPO

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

LIGHT ASSEMBLY, INDIThis contract pertains to the procurement of a Light Assembly, Indicator with NSN 6220-01-436-3703, requiring delivery within 171 days after order placement. The item is subject to stringent cybersecurity and export control requirements, including compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 as a certified third-party assessment organization, physical identification and bare item marking standards, and DLA packaging guidelines. Technical data associated with this item is controlled under either ITAR or EAR, prohibiting any export, including disclosure to foreign nationals within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only contractors with an approved US/Canada Joint Certification Program certification, completion of mandatory DLA export control training, and formal approval by DLA may access the information. The solicitation number is SPE4A6-26-T-08PA, issued by the ASC Commodities Division under the Department of Defense with a response deadline of July 29, 2026, and the place of performance is set at Cherry Point, North Carolina, with Jessica Fuentes-OSSIO as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

62--LIGHT ASSEMBLY,INDICAT

POSTED

about 19 hours ago

DEADLINE

Supply of Marine Navigational LightsThe contract entails the procurement and delivery of 781 marine navigational lights to meet stringent military standards for packaging, labeling, and shipment. Each unit must be traceable to its verified batch, ensuring full accountability and compliance with defense specifications. The contractor is responsible for end-to-end quality control, from manufacturing to final delivery, with emphasis on adherence to military-grade requirements for reliability and durability in operational environments. The contract is classified as a subcontract under the NAICS code 336320, issued by the Defense Logistics Agency within the Department of Defense. The award is linked to the contract number SPE4A626D5720 and was posted on July 20, 2026. While specific performance locations and point of contact details are not provided, the delivery and compliance obligations are defined by federal military standards, requiring the contractor to maintain detailed documentation and certification for every batch shipped to fulfill contractual obligations.

Defense Logistics Agency

POSTED

DEADLINE

Electrical Engine Starter Manufacturing and SupplyThe contract entails the manufacture and supply of electrical engine starters identified by NSN 2920015365569, with strict adherence to military specifications covering performance, quality, and reliability standards. All units must conform to defined packaging and labeling protocols to ensure compatibility with Department of Defense logistics systems and handling procedures. Delivery is required FOB Origin, meaning the contractor assumes responsibility for all costs and risks until the product leaves their facility, after which ownership and liability transfer to the Defense Logistics Agency. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and falls under the NAICS code 336320 for Automotive Electrical and Electronic Equipment Manufacturing, ensuring eligibility solely for small businesses. The solicitation was posted on July 20, 2026, with a firm deadline for responses set for August 4, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All work must align with DLA's procedural and compliance requirements, and the full details are accessible via the provided DIBBS link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Aerospace Lighting Component Supply – Aircraft Landing LightsThe contract requires the supply of 28 units of commercial-off-the-shelf aircraft landing lights designated by NSN 6220013061640 and part number 50-0178-5, all of which must adhere to the DLA Master List and meet military packaging standards to ensure compatibility and durability in operational environments. The items are intended for use by the Department of Defense and will be delivered to Hill Air Force Base, Utah, with the specified zip code 84056-5734 as the place of performance. The procurement falls under NAICS code 336320, classifying it within the aircraft manufacturing sector, and is structured as a subcontract under the ASC SUPPLIER OPER OEM DIVISION. All bids must be submitted by the response deadline of July 28, 2026, at 17:00 UTC, with the solicitation posted on July 20, 2026. The contract does not specify any set-aside provisions, indicating it is open to general competition. The procurement is hosted on the DIBBS platform, and interested parties must access the official solicitation link provided to review detailed requirements and submit responses. Compliance with military specifications, timely delivery, and adherence to packaging protocols are critical to meeting contract obligations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

LIGHT, LANDING, AIRCRThis contract pertains to the procurement of a commercial item identified as a Light Landing Aircraft component, with part number 50-0178-5 and NSN 6220013061640, for a quantity of 28 units. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and compliance with MIL-STD-2073-1E packaging standards is mandatory, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with a special fragile designation. Unit identification is not required per customer request, and the item is classified as a critical application item, requiring full adherence to all performance and quality specifications. The supplier must meet CMMC Level 2 cybersecurity standards and provide documentation for source approval, with all inspections and acceptance occurring at the destination. Delivery is required FOB origin, with a strict delivery window of 546 days from contract award, and the shipment must be routed to DLA Distribution Depot Hill in Hill AFB, Utah, via the designated freight address. The contract enforces zero tolerance for non-conformances under sampling plans derived from MIL-STD-1916 or equivalent zero-based methods, with critical, major, and minor attributes assigned strict verification levels or AQLs. No variance in quantity is permitted, and all packaging must conform to DLA’s procurement packaging requirements, including palletization and unit container specifications. The purchase request number is 7016880861, and the point of contact for inquiries is Jessica Baake, with the solicitation issued on July 20, 2026, and responses due by July 28, 2026, under NAICS code 336320 for aerospace product and parts manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

STRAINER ELEMENT, SEDIMThe contract is for the procurement of 131 Strainer Elements, Sediment, identified by NSN 4730-01-320-7111, under solicitation SPE7M3-26-T-7568, issued by the Defense Logistics Agency’s Fluid Handling Division. The request is a total small business set-aside under NAICS code 336320, with proposals due by July 31, 2026, and delivery required at the DLA Distribution facility in New Cumberland, Pennsylvania, within 213 days after the solicitation issue date. The contract is expected to be awarded on a firm-fixed-price basis, with an estimated total value of $124,004.60 based on a unit price of $946.60. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access to associated technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including GS1-128 barcoding, with preservation method code 10 for dry storage. Inspection and acceptance occur at the destination point by the Government, with compliance required to MIL-T-31000, MIL-S-901, and DI-ENVR-80706. The contractor must submit Safety Data Sheets and hazard labels conforming to 29 CFR 1910.1200, and is prohibited from using hexavalent chromium or storing hazardous materials without approval. Invoicing must be submitted electronically through WAWF, and all offerors must be registered in SAM.gov. The solicitation includes numerous DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility, whistleblower rights, and the prohibition of certain defense telecommunications equipment. No formal evaluation factors, weights, or award basis are specified beyond the small business set-aside, and no attachments are formally listed. Additional requirements include compliance with the Supplier Performance Risk System and restrictions on mandatory arbitration agreements, with no security clearance, key personnel, or option provisions specified.

FLUID HANDLING DIVISION

POSTED

DEADLINE

STARTER, ENGINE, ELECThe contract, identified as SPE7LX-26-U-8879, is a solicitation issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 76 electrical engine starters, identified by NSN 2920-01-536-5569, under a Total Small Business Set-Aside as defined by FAR 19.5. The contract is structured as an Indefinite Delivery Contract (IDC), allowing for multiple delivery orders with a guaranteed minimum of 11 units and a maximum contract value of $350,000.00. Delivery is required within 69 days of order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements supersede this standard, and all items must be marked and labeled per MIL-STD-129, including proper barcoding and hazardous material identification per 29 CFR 1910.1200. Palletization must conform to RP001: DLA Packaging Requirements for Procurement, with the Unit of Issue and Quantity per Unit Pack as specified in the contract. The solicitation mandates strict adherence to numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including those on employment equity, combating trafficking in persons, employment eligibility verification, sustainable products, hazardous materials handling, whistleblower protections, information disclosure, cybersecurity compliance per NIST SP 800-171, and subcontracting for commercial items. Contractors must hold a valid Unique Entity ID (UEI) and CAGE code and represent their small business status accurately under applicable socioeconomic categories. Payment must be processed exclusively through the Wide Area WorkFlow (WAWF) system, and proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 4, 2026. The Contracting Officer retains discretion over the award basis, and no evaluation factors or scoring criteria are explicitly outlined, suggesting a potentially LPTA or trade-off approach. All supplies must be free of government identification if not accepted, and compliance with all technical, quality, and logistical requirements is mandatory for acceptance.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.

Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.

Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.

Ball and Roller Bearing Manufacturing

POSTED

about 14 hours ago

DEADLINE

BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-286-0906, quantity of four units, under solicitation SPE4A6-26-T-08MV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Inspection and acceptance occur at origin using sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, or a zero-based plan; critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is designated as a critical application requiring casting or forging, with tooling typically held by the manufacturer, and sourcing assistance must be requested through DLA’s designated channels. Only approved sources are KAMATICS CORPORATION and ROLLER BEARING COMPANY OF AMERICA, each with specific part numbers. Item Unique Identification is not required per the Service customer’s request. Delivery is FOB origin with a 171-day lead time, final delivery due by April 20, 2027, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and palletization adhere strictly to DLA’s procurement standards, and all documentation must support source approval and manufacturing compliance.

Support Activities for Coal Mining

POSTED

about 14 hours ago

DEADLINE

LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE