Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Qualified Hose Assemblies to Military Specifications

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of non-mechanical hose assemblies that meet the stringent military specifications MIL-DTL-25579H and MS8005E, with full qualification on the Qualified Products List for FSC 5935. These hose assemblies are critical components intended for use in defense and maritime applications where reliability and performance under extreme conditions are essential. The work must be performed in compliance with all technical, quality, and documentation requirements stipulated by the referenced standards, ensuring traceability, material integrity, and consistent production practices validated through testing and certification. The contract is classified as a subcontract under NAICS code 332994, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The place of performance is designated as Jacksonville, with a zip code of 28545-6070, indicating the operational location for delivery or manufacturing activities. The contracting activity falls under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys division, and the procurement is being managed through the DIBBS system. All bidders must be prepared to demonstrate compliance with military quality assurance protocols and qualification procedures to be eligible for award.

General Info

Manufacture MIL-DTL-25579H and MS8005E hose assemblies for defense use in Jacksonville by July 30, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

JACKSONVILLE, NC, 28545-6070, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of non-mechanical hose assemblies compliant with MIL-DTL-25579H and MS8005E standards, including qualification under the Qualified Products List (QPL) for FSC 5935.

Similar Contracts

Same NAICS industry code

Nonmetallic Hose Assembly SupplyThe contract entails the supply of 14 nonmetallic hose assemblies identified by NSN 4720003209237, with full compliance required for all federal packaging, labeling, and hazardous materials regulations. The contractor must submit Safety Data Sheets (SDS) as part of the documentation package to ensure regulatory adherence and safe handling throughout the logistics chain. Delivery of the assemblies is expressly directed to DLA Distribution in New Cumberland, Pennsylvania, establishing the sole point of reception for the ordered items. The contract falls under the NAICS code 332994, indicating its classification within other fabricated metal product manufacturing, and is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency. The solicitation was posted on July 20, 2026, and the contract is administered through the DIBBS system with the identifier SPE7M426V3026, though no specific point of contact or place of performance details beyond the delivery location are provided.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Precision Machining of Continuous Thread StudsThe contract entails the manufacture and supply of 21 precision-machined continuous thread studs identified by NSN 5307-01-728-4886, meeting strict military specifications that govern material selection, dimensional accuracy, threading quality, and surface treatment. The work requires full compliance with defense standards, including any necessary heat treatment processes to ensure mechanical integrity, as well as comprehensive inspection protocols to verify conformance prior to delivery. Packaging must adhere to military requirements for protection, labeling, and traceability throughout logistics handling. The contract is classified as a subcontract under the NAICS code 332994, indicating a specialized manufacturing activity, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. It was posted on July 20, 2026, with the place of performance and point of contact details unspecified, suggesting the work may be performed at the subcontractor’s facility without geographic restrictions. The solicitation number is not provided, but the award reference links to the DIBBS system, confirming it is an official government procurement action. All aspects of production, from sourcing raw materials to final packaging, must meet federal defense procurement compliance standards.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Exhaust Manifold Manufacturing and SupplyThe contract entails the manufacture, testing, and delivery of 34 exhaust manifolds in full compliance with military specifications, encompassing all stages from casting and machining to final finishing. Each unit must meet established standards under MIL-STD or SAE requirements to ensure performance, durability, and quality consistent with defense-grade components. The work is being conducted under a subcontract arrangement administered by the Defense Logistics Agency, a department within the Department of Defense, with the North American Industry Classification System code 332994 indicating specialized metal product manufacturing. The project is scheduled with a posted date of July 20, 2026, and is linked to the contract reference SPE7LX26F73R9, which governs fulfillment and delivery timelines. The place of performance and exact office address are not specified, but the work is expected to be carried out in alignment with DLA procurement protocols. The contract is part of a broader initiative to support military equipment readiness, requiring strict adherence to technical and quality control parameters throughout production. Delivery must be completed within the agreed timeframe, and compliance with all testing and documentation requirements is mandatory for acceptance.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Hose Assembly Manufacturing (Non-Metallic)The contract requires the manufacture and delivery of non-metallic hose assemblies that meet strict military specifications, ensuring reliability and performance in defense applications. Full traceability of materials and components is mandatory, along with strict compliance with shelf-life requirements to guarantee operational readiness over time. All assemblies must be packaged in accordance with MIL-STD-129 standards to ensure uniformity, durability, and proper identification during storage and transport. The work is being performed under a subcontract managed by the Defense Logistics Agency, a branch of the Department of Defense, and is classified under NAICS code 332994 for other fabricated metal product manufacturing. The contract was posted on July 20, 2026, and the place of performance is not specified, indicating flexibility in manufacturing location as long as all technical and logistical requirements are met.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Safety Relief Valve Manufacturing for MK-48 TorpedoThe contract entails the manufacture and delivery of a precision safety relief valve specifically engineered for use in the MK-48 torpedo system, adhering to rigorous military specifications to ensure operational reliability and safety under extreme conditions. The scope requires full compliance with all technical, quality, and performance standards mandated by the Department of Defense, including successful completion of First Article Testing to validate design and production processes against established criteria. Each unit must undergo mandatory government inspection prior to acceptance, ensuring conformity with contractual requirements and mission-critical performance benchmarks. Production is to be performed under a subcontract arrangement, with the Defense Logistics Agency overseeing delivery to support the broader defense supply chain for naval weaponry. The work falls under the NAICS code 332994, indicating specialized manufacturing of other fabricated metal products, and must be completed in alignment with government inspection timelines and quality control procedures. While specific delivery locations and contact details are not listed, the contract is managed through the DLA's procurement system and is tied to the maintenance and enhancement of the MK-48 torpedo's integrated safety systems.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Hose Assembly Supply (Non-Metallic)The contract pertains to the supply of 74 non-metallic hose assemblies that must meet stringent military specifications and technical standards established by the Defense Logistics Agency. These hose assemblies are intended for use within Department of Defense systems and must comply with all applicable performance, material, and testing requirements outlined in DLA technical guidelines. The procurement is structured as a subcontract, indicating that the primary contractor may be managing multiple suppliers to fulfill the full order. The work is governed under the NAICS code 332994, which classifies it within the Other Miscellaneous Fabricated Metal Product Manufacturing category, reflecting the specialized nature of the fabrication process involved. The contract was posted on July 20, 2026, and is administered through the DLA’s procurement system with the award identification SPE7M426P4090. While no specific location for performance or point of contact is provided, delivery is expected to support military operations and logistics networks under the agency’s broader supply chain objectives.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Supply of Metallic Bent Tube (NSN 4710-01-388-7396)The contract pertains to the procurement and delivery of a precision-formed metallic bent tube designated by NSN 4710-01-388-7396, intended for use in critical military hydraulic, pneumatic, or fuel systems. This component must meet exacting dimensional and material specifications to ensure operational reliability under demanding environmental and stress conditions inherent in defense applications. The item falls under NAICS code 332994, indicating it is manufactured by a facility engaged in other fabricated metal product manufacturing, and the contract is structured as a subcontract within the broader defense supply chain. The contract was posted on July 20, 2026, and is administered by the Defense Logistics Agency under the Department of Defense. Although specific performance location and point of contact details are not provided, the procurement is executed through the DIBBS system under contract number SPE7M225P4289. The absence of a set-aside designation suggests the opportunity is open to all qualified suppliers without preference given to small businesses or other categories. The scope is narrowly focused on meeting the technical requirements of a single, critical component essential to military vehicle or system integrity.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Supply of Valve Extension (TIR/TIRE) ComponentsThe contract entails the supply and delivery of 1,119 units of valve extensions designed for tire applications, commonly referred to as TIR or TIRE components, to meet stringent federal standards for packaging, labeling, and hazardous materials handling. These components are critical for operational readiness and logistics support, ensuring compliance with safety and regulatory requirements throughout distribution and use. The work is being executed under a subcontract issued by the Defense Logistics Agency, a division of the Department of Defense, leveraging the NAICS code 332994 for other fabricated metal product manufacturing. The contract was posted on July 20, 2026, and performance is expected to align with DLA’s broader supply chain objectives, though specific delivery locations or point of contact details are not provided. The contract reference number SPE7L726V0531 is available through the DIBBS system for tracking and procurement transparency.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

MOUNT, RIFLEThe contract solicitation SPE7L7-26-T-4372 is for the procurement of two rifle mounts, a critical gun part with unique requirements and sole-source sourcing under AMSTA525, identified by part number RRS-9000062 and NSN 1005-01-702-7401. The item must be manufactured by a single approved source whose identity must be formally submitted and approved by the Contracting Officer prior to award, with any subsequent changes requiring formal contract modification. Delivery is required FOB origin within 169 days of award, for final delivery to the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, marking must adhere to MIL-STD-129 with no special markings, and palletization must meet DLA standards. Product Verification Testing (PVT) is mandatory prior to acceptance of each shipment, requiring five samples from each subcontractor, with one sample potentially destroyed during testing. The contractor is responsible for ensuring all components meet the technical specifications outlined in the source-controlled drawing and associated technical data packages, with quality assurance inspection conducted by the Quality Assurance Representative at the manufacturer’s facility. The contract enforces stringent cybersecurity compliance under CMMC Level 2 Self-Assessment and DFARS 252.204-7997, requiring adherence to NIST SP 800-171 standards for safeguarding Covered Defense Information, along with mandatory cyber incident reporting per DFARS 252.204-7012. Use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specifications, and substitutes require prior approval. Demilitarization procedures apply per Category I munitions requirements, and government identification markings must not be removed from non-accepted items. Configuration changes must go through formal Engineering Change Proposal procedures, and all measuring and test equipment used in production must be calibrated to national standards. The contract includes clauses on equal opportunity, trafficking in persons, small business representation, subcontracting, and accelerated payments to small business subcontractors, and mandates electronic invoicing exclusively through WAWF. Offerors must hold a valid UEI and CAGE code, declare their size status and socioeconomic certifications, and comply with prohibitions on acquiring covered telecommunications equipment from foreign adversaries. All proposals must be submitted electronically via

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

CENTER SECTION, CHUTThe contract pertains to the procurement of 2,877 units of a CENTER SECTION, CHUTE with NSN 1005-01-059-5054 under solicitation SPE7L1-26-Q-1328, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 122 days after contract award, with responses due by July 30, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date controlling for simplified acquisitions. The item is subject to demilitarization requirements as a Category I munitions list item and is classified as covered defense information. Cybersecurity compliance requires either a CMMC Level 2 self-assessment or certification by an approved C3PAO. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes must follow formal engineering change proposal procedures, and inspections must occur at origin. Government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request. Technical data associated with the item is subject to ITAR or EAR export controls, and access to such data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. The place of performance is Tracy, California, and the primary point of contact is Zane Zwayer via email and phone provided.

LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

BOLT, AUTOMATIC WEAP

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

VENTThis contract, issued under solicitation number SPE4A7-26-T-582K by the Department of Defense’s ASC Supplier Oper AE and AF Division, requires the procurement of 40 units of part number 18062 with NSN 5342-01-018-5264, to be delivered FOB origin within 170 days of contract award, with a required ship date of January 15, 2027. The item is designated as a critical application item, and all supplies must comply strictly with DLA’s packaging requirements outlined in RP001 and MIL-STD-2073-1E, including preservation methods, packaging materials, and marking per MIL-STD-129. No special marking is required, and palletization must adhere to DLA standards. Inspection and acceptance occur at the destination facility in Barstow, CA, with no variance allowed in quantity—exactly 40 units must be delivered. The contract enforces stringent quality and safety provisions, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The use of mercury or mercury-containing compounds is strictly prohibited in the product, preservation, packaging, and marking unless explicitly exempted for functional applications like batteries or sensors, and even then, portable devices must include secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. All supplies must originate from approved vendors, including PACCAR INC and DELA TECHNOLOGY CORPORATION, and must be shipped to the designated DLA Central Receiving Warehouse in Barstow, CA, with transportation governed by DLA procedural notes C19 and C20.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

HOSE ASSEMBLY, NONMETALA nonmetallic hose assembly with a 5/8 inch inner diameter and 71 inch length is being procured under solicitation SPE7M0-26-T-013N for a single unit delivery, with a required delivery date of July 15, 2026, and a five-day delivery window after award. The item is identified by NSN 4720-01-268-5326 and must comply with Technical Data Package Rev A Gen 1 per drawing number 81495 7091249 Revision A dated 09/11/1986 and reference SAE J517-2020 as Type 100R2, classifying it as a Type I (Code W) item with a non-extendable 120-month shelf life. The procurement is subject to DLA Packaging Requirements and MIL-STD-2073-1E packaging standards with marking per MIL-STD-129, including special coding for shelf life and Type I designation. The item is designated as critical application and must be shipped via traceable means—parcel post is prohibited—with delivery FOB origin to the specified address in Ronkonkoma, NY. The contract requires full and open competition, prohibits quantity variance, and mandates inspection and acceptance at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the unit of issue is as defined by authorized DoD standards. The point of contact for the solicitation is Abigail Masterson, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOC Buys office.

Fabric Coating Mills

POSTED

about 5 hours ago

DEADLINE

CARTRIDGE VALVE SANThe contract is for the procurement of four cartridge valve units with NSN 4730-01-529-5515 under solicitation SPE7M0-26-T-013R, requiring delivery within five days of award, FOB origin, with no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 with palletization following RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with no use of parcel post; shipment must occur by the fastest traceable means to the designated delivery point in Texarkana, Texas. The contract mandates government identification be removed from non-accepted supplies and includes specific marking requirements for the consignee, freight address, and ship-by instructions with mandatory reference to the provided DLA tracking and code identifiers. The required delivery date is June 29, 2026, with the solicitation response deadline set for July 31, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

CIRCUIT BREAKERThe contract is for the procurement of 50 circuit breakers identified by NSN 5925-01-466-9170, with a delivery requirement of five days after contract award. The solicitation number is SPE7M0-26-T-013D, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The procurement is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. The revision of the master list in effect at the time of solicitation or award controls compliance. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. No technical data is available at this center, so the alternate offeror must submit a complete data package covering both the primary and alternate parts. Delivery performance is to be conducted at Bremerton, Washington, and the primary point of contact for inquiries is Rocio Mino.

Other Electric Power Generation

POSTED

about 5 hours ago

DEADLINE

SWITCH, LIQUID LEVELThe contract pertains to the procurement of one unit of a liquid level switch with NSN 5930-01-492-9140, supplied by Babington Technology, Incorporated under a firm fixed price arrangement with no variance allowed in quantity. Delivery is required within 30 days after award, with shipment originating from the supplier and destination inspection and acceptance occurring upon arrival at the specified delivery point. All packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those over ASTM D3951, and must adhere strictly to MIL-STD-129 for marking and labeling. If the item is classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The item must be shipped via traceable means, explicitly excluding parcel post, to the delivery address in Boise, Idaho. The government purchase request number is 7017523169, and the required delivery date is July 16, 2026. Contract information is tied to solicitation SPE7M0-26-Q-1079, which was posted on July 20, 2026, with responses due by July 23, 2026. Point of contact for the solicitation is Laurie Wassmuth of the Department of Defense’s Maritime Supply Chain ESOC Buys.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

CONNECTOR BODY, RECEThe contract pertains to the procurement of a commercial off-the-shelf connector body, part number 5-582151-2, with NSN 5935-01-320-1623, sourced from TE Connectivity Corporation. Two line items are specified: three units at $3.00 each and four units at $4.00 each, totaling seven units with a combined value of $25.00. Delivery is required within five days from the origin, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the item is non-hazardous under FED-STD-313, it must be packaged in accordance with ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging standards. The unit of issue is each, and quantity per unit pack is one. Shipping must be via the fastest traceable means; parcel post is prohibited. Delivery must reach the Puget Sound Naval Shipyard in Bremerton, WA, with designated freight and parcel post addresses provided. The original required delivery date is July 17, 2026, under contract SPE7M0-26-T-013M, and the solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. Government-specific codes and contacts, including the point of contact Rocio Mino, are included for administrative and logistics purposes.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract specifies the procurement of a nonmetallic hose assembly under solicitation SPE7M0-26-T-013P, with a single unit required and a delivery deadline of five days from the order date. The item, identified by NSN 4720-99-613-8974 and part number P06887800 from Mactaggart, Scott & Co. Ltd, is designated as a critical application item and must be delivered FOB origin with no tolerance for quantity variance. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, and palletization must follow DLA packaging requirements. The shipment is to be sent via the fastest traceable means to the USS Lyndon B. Johnson at West Bath, Maine, with explicit prohibitions against parcel post delivery. Strict environmental and material restrictions apply: ozone-depleting chemicals and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, or specified naval instruments, with additional containment requirements for portable mercury-containing devices. Substitute materials require prior approval, and technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The contract is issued by the Department of Defense’s Maritime Supply Chain ESOC, with point of contact Abaigael Masterson and a response deadline of July 31, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

RESISTOR NETWORK, FIXEDThe contract specifies the procurement of a fixed film resistor network with the NSN 5905012185402 and part number M8340108K3320FC, manufactured in accordance with MIL-PRF-83401H Sup 1 and MIL-PRF-83401/8E Rev E, both dated May 29, 2024. This is a critical application item requiring strict compliance with国防部 technical and quality requirements referenced from the DLA Master List, and the use of any Class I ozone-depleting substances is strictly prohibited unless explicit written approval from the Contracting Officer is obtained. The item must be packaged per MIL-STD-2073-1E with marking in accordance with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free attributes on each unit package. ESD and EMI protection is mandatory, requiring MIL-PRF-81705 qualified packaging materials—Type I barrier material for both ESD and EMI protection, with verification that all materials are sourced from manufacturers listed on QPL-81705. The supplier must ensure physical protection of leads and terminals to prevent damage during handling and transport. Delivery is required within five days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. The item must be shipped via traceable freight methods, not parcel post, to Robins AFB, Georgia, with the original required delivery date set for July 17, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

LOCK, SECONDARYThe contract pertains to the procurement of one unit of LOCK, SECONDARY with NSN 5930016024015, under solicitation SPE7M0-26-T-013Q, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys. Delivery is required within five days of shipment, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, where the item must comply with MIL-STD-2073-1E packaging standards, including specific preservation, wrapping, and container codes, along with MIL-STD-129 marking requirements and DLA palletization guidelines. The supply must be shipped via traceable means, excluding parcel post, to the designated military warehouse at Fort Hood, Texas, with a required delivery date of July 17, 2026. The item is to be delivered to a specific government receiving point identified by the M/F (TCN) W45NQ761910071 and associated codes, and must be properly marked per government specifications with no special labeling. Pricing is set at one dollar per unit, with the total value reflecting the single quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

REDUCER, PIPEThe contract pertains to the procurement of a pipe reducer with NSN 4730-01-668-0509 and part number 1496-DC, supplied by FAIRVIEW FITTING & MANUFACTURING, with an alternate source identified as TRU-HITCH, INC. under part number 02400. The requirement is for a single unit to be delivered within five days of contract award, FOB origin, and is subject to strict compliance with DLA's packaging standards per MIL-STD-2073-1E and marking requirements as specified in MIL-STD-129, including a special marking code indicating the item is open for inspection or use. The procurement is governed by the DLA Master List of Technical and Quality Requirements incorporated by reference, with prohibitions against the use of Class I ozone-depleting chemicals, overriding any conflicting specification language unless explicitly authorized. No shelf life applies to this item, and substitute chemicals must be pre-approved unless already permitted by the underlying specifications. The delivery is directed to Camp Casey in Dongducheon, South Korea, under a rotational force deployment, with shipment governed by DLAD Procurement Notes C19 and C20 regarding transportation and first destination transfers. The unit of issue is each, with a fixed quantity of one, no variance allowed, and inspection and acceptance occurring at destination. The contract number is SPE7M0-26-T-013H, with a required delivery date of July 17, 2026, and the solicitation was posted on July 20, 2026, closing for responses on July 31, 2026. The NAICS code 326122 identifies this as a plastic product manufacturing activity, and the award is for the U.S. Department of Defense through the Maritime Supply Chain ESOB. Government-use only codes and shipping labels are included for logistics tracking and administrative control.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

GASKETThe contract is for the procurement of 30 gaskets with part number 43008 and NSN 5330-01-171-1371, under solicitation SPE7M0-26-T-012Y, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with the solicitation posted on July 20, 2026, and responses due by July 31, 2026. All supplied items must comply with DLA packaging requirements and technical/quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain any intentionally added mercury or mercury-containing compounds, except for functional uses in specific applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary for the mercury, per NAVSEA 5100-003D. The item is to be delivered to Bremerton, WA 98314-5001, and the primary point of contact for the contract is Rocio Mino at DLA.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

CIRCUIT BREAKERThe contract involves the procurement of three circuit breakers with part number QC2050 and NSN 5925-00-262-5723, supplied by Eaton Corporation under solicitation SPE7M0-26-T-013A. The items must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and are subject to destination inspection and acceptance. Packaging must comply with MIL-STD-2073-1E, using packaging code Q at level B, with marking adhering to MIL-STD-129 and no special marking required. The delivery address is the SAGAMI STORAGE FACILITY in Sagamihara, Japan, with the same location designated for marking and freight shipping. The unit of issue is each, with a total contract value of $9.00 for the three units, and the required delivery date is July 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and hazardous materials handling must follow DLAD Proc Note C19 and C20. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with Audrey Acuna as the primary point of contact, and the solicitation closes on July 31, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

VOLTMETERThe contract solicits two voltmeters with NSN 6625-01-624-0283 under solicitation number SPE7M0-26-T-013C, with a delivery requirement of five days after delivery order. The item is being procured by the Department of Defense through the Maritime Supply Chain ESOC Buys office, and performance is designated to FPO with ZIP 96306-1204. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with revision control tied to the solicitation issue or award date depending on acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted July 20, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 334515 for other measuring and controlling device manufacturing. Primary point of contact is Gerard Quinn, reachable via email and phone provided, and further details are available through the DIBBS system. Government identification must be removed from any non-accepted supplies in accordance with RQ011.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 5 hours ago

DEADLINE