Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of NAS1670 Blind Rivets

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 56 specialized blind rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be produced according to NSN 5320007818609, adhering strictly to NAS1670 Revision 09 and Drawing 13873 EI-007818609. Performance will take place at Tinker AFB, with a focus on delivering fully inspected and packaged units. To qualify, the manufacturer must utilize precision aerospace machining equipment and maintain CMMC Level 2 certification. Quality assurance is mandatory, requiring compliance with either MIL-STD-1916 or ASQ H1331 standards. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332722.

General Info

Manufacture and supply 56 specialized blind rivets for DLA at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9876.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIVET, BLIND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized blind rivets for prime contractors on DLA Weapons Support ASC projects. Manufactures 56 units of Blind Rivets (NSN 5320007818609) adhering to NAS1670 Revision 09 and Drawing 13873 EI-007818609. Requires precision aerospace machining equipment and compliance with MIL-STD-1916 or ASQ H1331 quality standards and CMMC Level 2. Delivers 56 inspected and packaged blind rivets.

Similar Contracts

Same NAICS industry code

Supply of Plain Cap Nuts (NSN 5310-01-3490759)This subcontract involves the manufacture or procurement of 2,757 plain cap nuts under NSN 5310-01-3490759 for prime contractors supporting Department of Defense projects. These components are designated as Critical Application Items and must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed by the DLA Weapons Support ASC Commodities Division with performance located in Texarkana. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-658-7242)This subcontract involves the procurement and delivery of 113 units of Hexagon Head Cap Screws, identified by NSN 5305-01-658-7242, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The hardware must strictly adhere to all provided technical drawings and specifications to ensure compliance with Department of Defense standards. The completed order must be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. All units are required to be delivered by the final deadline of April 10, 2027.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Shear BoltsThis subcontract involves the manufacture and supply of 20 specialized shear bolts, part number NAS6208-50, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate the bolts according to the current NAS6208-50 part standard, ensure physical identification and bare item marking comply with MIL-STD-130N paragraph 4.1.b(2), and follow ASTM D3951 packaging guidelines. The project falls under NAICS code 332722 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Critical Application Socket Head Cap ScrewsThis subcontract involves the supply of high-precision socket head cap screws for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for manufacturing or sourcing part number 3392AS737-17, ensuring strict adherence to TDP Rev B Gen 3 and Basic Drawing NR 30003 3392AS737 Revision V. The scope of work includes the delivery of one unit of NSN 5305015725242, which must be certified as a Critical Application Item and processed with packaging and labeling that meets MIL-STD-129 standards. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 332722. The place of performance is designated as MCBH Kaneohe Bay. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Finned Neck BoltsThis subcontract involves the manufacture and supply of 1,408 finned neck bolts, identified by NSN 5306013631749, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the use of precision machining equipment to achieve specific finned neck geometries. All units must undergo sampling and inspection according to MIL-STD-1916 or ASQ H1331, with marking and packaging adhering to RQ017, MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. The finished and packaged bolts are to be delivered to DLA Distribution Barstow in California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Retainer, Nut and Bolt SupplyThis subcontract, titled Retainer, Nut and Bolt Supply, involves the manufacture or sourcing of 174 units of specialized retainer hardware, including nuts and bolts, to support prime contractors for the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work requires strict adherence to packaging and labeling standards, specifically TQ requirement IP025 for hazardous materials, ASTM D3951 for non-hazardous materials, and MIL-STD-129 and RP001 for palletization and labeling. The completed hardware must be delivered to the designated DLA site located at Robins Air Force Base. The contract falls under NAICS code 332722, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-719-2997)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Loop Clamp and Mounting Bracket SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, involves the manufacture and supply of loop clamps and mounting brackets specifically associated with NSN 5340016020072. The selected provider will support prime contractors on Defense Logistics Agency supply contracts, ensuring all physical components are delivered in accordance with strict technical data requirements found in DLA PCF folders. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722. Compliance is mandatory regarding the Buy American and Balance of Payments Program origin requirements, as well as specific military standards for packaging and marking, namely MIL-STD-2073-1E and MIL-STD-129. The response deadline for this opportunity is November 20, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 9 hours ago

DEADLINE

Precision Manufacturing of Close Tolerance Screws (NAS1994C4T)This subcontract involves the precision manufacturing of 633 close tolerance screws for the DLA Weapons Support ASC Commodities Division. The components must be produced via precision machining or cold-heading to meet NSN 5305016005925 and NAS1994C4T specifications, with a strict prohibition on the use of additive manufacturing. All delivered units must be finished, inspected, and marked according to the required standards. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification and maintain DFARS cybersecurity compliance. The work is associated with NAICS code 332722 and will be performed at Robins Air Force Base. Responses to this requirement are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Manufacturing of Flat Washers (NSN 5310-01-384-0140)This subcontract involves the precision manufacturing of 157 critical application flat washers for the DLA Weapons Support ASC Commodities Division under NSN 5310-01-384-0140. The contractor is required to fabricate the components according to Basic Drawing NR 43689 258759, Revision G, utilizing mercury-free materials and precision machining equipment. Quality assurance must adhere to a zero-non-conformance sampling plan in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and hold DLA approval for handling ITAR and EAR data. The project is categorized under NAICS code 332722, with the place of performance located in Tracy, California. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Self-Locking Nuts (NAS1758)This HUBZone set-aside subcontract, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of 1,841 double self-locking nuts with extended washers. The required components must strictly adhere to NAS1758 Revision 3 and NSN 5310010430046, specifically part number NAS1758L6. All parts must be manufactured or sourced in compliance with the DLA Master List of Technical and Quality Requirements for critical application items. The contract is designated under NAICS code 332312, with the place of performance located at Tinker AFB. Interested parties must have submitted responses by the deadline of November 13, 2026. This procurement ensures that prime contractors on DLA supply contracts receive specialized hardware meeting rigorous military and technical specifications.

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 9 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

POSTED

about 9 hours ago

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement of 1,004 socket head cap screws. The selected provider is responsible for manufacturing or sourcing the hardware and ensuring all items strictly adhere to MIL-STD-129 standards for marking and labeling to support prime contractors fulfilling DLA supply contracts. Logistics for the order are handled through Government-Arranged Transportation via the First Destination Transportation program. Performance for this contract is centered in Tracy, California, with a response deadline set for November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military Preservation and Packaging ServicesThis subcontract for Military Preservation and Packaging Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves the preservation, packaging, packing, and marking of hardware to prevent corrosion and damage during transit. All operations must be executed in strict accordance with MIL-DTL-197M, and the provider must utilize a packaging facility that adheres to Section 4 of that same standard. The performance of these services will take place in San Diego, California. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026. The contract falls under NAICS code 492110 and focuses on the delivery of properly preserved and marked shipments for government use.

Couriers and Express Delivery Services

POSTED

about 9 hours ago

DEADLINE

Annular Ball Bearing Manufacturing and SupplyThis subcontract involves the manufacture and supply of 34 specialized annular ball bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The provider is responsible for sourcing or manufacturing these components to meet specific technical data requirements accessed via the DLA portal, with performance taking place in San Diego. Strict quality control measures are mandatory for this project, requiring adherence to the verification requirements outlined in Section 4 of MIL-DTL-197M. Additionally, the contractor must implement sampling plans in accordance with either MIL-STD-1916 or ASQ H1331, Table 1, to ensure all delivered units meet the Department of Defense standards.

Ball and Roller Bearing Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturer of Specialized Machine Bolts (NSN 5306015219291)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Aerospace Flat Washer Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Machine Screw Supplier (NSN 5305-01-540-4246)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Solid Aluminum Alloy Rivet Manufacturing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Assembled Washer Screws (NSN 5305-01-155-6107)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Machine Screw Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Shear Bolts (NAS6804A15)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturer of NAS620 Flat Washers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Grooved Clamp Couplings

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305015131402)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing and Supply of Hook Bolts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Machine Screw Supplier (NSN 5305016078222)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS