This Subcontract opportunity from Department Of Defense was posted on August 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacturer of Radio Frequency Cable Assemblies (NSN 6150 01 678 2650)

Closed

Federal

Submission Closed09/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation 53-27 is a request for bid issued by the New Hampshire Department of Administrative Services for the procurement of HP XPD Antenna equipment. The required hardware consists of 8-foot diameter antennas made of galvanized steel, supporting 5-7 GHz bands with dual polarization and CPR137G flange types. The equipment must be new and of the current model year, capable of surviving wind speeds between 155 and 343 mph. Each unit must include three anchor brackets, a radome deflection kit, three 3m strut pipes, and three tower clamp kits. The award will be granted to the responsible vendor providing a conforming bid at the lowest total cost, with the state serving as the sole arbiter of specification compliance. Deliveries must be completed FOB Destination within 30 days of receiving a purchase order. Vendors are required to be registered to conduct business in New Hampshire and must provide a DUNS or SAM.gov number. Environmental compliance is emphasized, requiring the use of environmentally preferable materials and the elimination of PVC or polystyrene where possible. Additionally, vendors must provide material safety data sheets per the Worker's Right to Know Act and notify the state if products contain mercury or PFAS. Payment will be processed via ACH 30 days after the invoice is received and the items are accepted. Bids must be submitted by November 13, 2026, and must include a signed transmittal letter, a completed offer sheet, and initialed pages.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Avionics/Electronics Repair Services (Display Unit)This subcontract for Avionics/Electronics Repair Services involves performing depot-level repair and overhaul of Display Units for prime contractors supporting US Navy projects. The work is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. The contractor is required to deliver fully repaired and certified units while adhering to standard repair practices, manuals, directives, and technical orders. Technical execution must strictly follow Technical Data Package version O02 and comply with MIL-STD-129 for all physical identification and marking requirements. The opportunity falls under NAICS code 334220, with a response deadline set for November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

P25 Interoperability Radio EquipmentThis subcontract involves the supply and configuration of P25 compliant radio hardware for prime contractors working on FA4484 87 Cons Pk projects at Joint Base McGuire-Dix-Lakehurst. The primary objective is to provide radio units that are fully compatible with the New Jersey Interoperability Communication System to ensure seamless emergency network interoperability. The scope of work includes the delivery and installation of functional P25 radio units specifically for EMS vehicles. Managed under NAICS code 334220 for the Department of Defense, the project requires strict adherence to technical standards to maintain critical communication capabilities across emergency services.

POSTED

DEADLINE

Manufacture and Design of Electrical Plug ConnectorsThis subcontract involves the manufacture and design of electrical plug connectors, specifically NIIN 014831935, for prime contractors delivering to the Department of Defense agency Navsup Weapon Systems Support Mech. The contractor is responsible for producing connectors based on descriptive catalog numbers and ensuring all finished products are delivered fully inspected. The scope of work requires the implementation of government-acceptable inspection systems and strict adherence to FAR 52.246-2 standards. Additionally, the contractor must perform all necessary preservation, packaging, packing, and marking in accordance with contract requirements. The opportunity was posted on November 9, 2026, with a response deadline of December 7, 2026, under NAICS code 334220.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Antenna Repair and Functional Restoration (NSN 5985-01-618-1082)This subcontract for Antenna Repair and Functional Restoration involves the teardown, evaluation, repair, and modification of antennas under NSN 5985-01-618-1082 for NAVSUP Weapon Systems Support projects. The selected contractor is responsible for disassembling and diagnosing antenna units, executing repairs according to original manufacturer specifications and drawings, and completing all required OEM inspection and testing. The final deliverable consists of one fully repaired and tested antenna accompanied by comprehensive inspection records. To be eligible, the contractor must possess OEM authorization and ensure full IUID compliance per DFARS 252.211-7003, as well as maintain CAV RP reporting access. This opportunity falls under NAICS code 334220 and is managed by the Department of Defense. The response deadline for this requirement is November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Antenna Hardware Supply (NSN 5985-01-583-8968)This subcontract involves the supply of six specialized antenna units, identified by NSN 5985-01-583-8968, to support prime contractors on DLA supply contracts for the Department of Defense. The provider must ensure all units meet strict technical specifications and adhere to Buy American and Trade Agreements certifications in accordance with FAR 25.105. The agreement specifies that pricing will be determined based on catalog, market, or OEM standards. Managed under NAICS code 334220 and associated with the Pa DLA Aviation At Philadelphia, the contract requires the successful delivery of all six units to the government.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Aerospace-Grade Electronic ComponentsThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, involves the supply of specialized electronic components and metal housings for US Air Force F-15 aircraft projects. The scope of work includes the fabrication of metal housings measuring 6.5 by 8 by 18 inches, as well as the provision of military-grade capacitors, transistors, and circuit boards specifically designed for power conversion. All deliverables must strictly adhere to Mil-Spec standards for aerospace electronics. The contractor is responsible for delivering either raw materials or completed sub-assemblies directly to the prime manufacturer. This opportunity falls under NAICS code 334220 and was posted on November 9, 2026, with a response deadline of November 25, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

MCMP Radio Hardware ProductionThe MCMP Radio Hardware Production subcontract involves the manufacture of physical radio units for prime contractors supporting Department of Defense Multi-Channel Manpack projects. The scope of work includes the production of RF front-ends, circuitry, and manpack-compatible chassis, all of which must be built according to strict device specifications. To ensure the integrity of the hardware, the provider must adhere to rigorous Supply Chain Risk Management and cyber-physical security standards. This effort is managed under the Department of Defense and will be performed in Quantico, Virginia. The contract falls under NAICS code 334220, focusing on the delivery of finished radio hardware units. Interested parties should note the response deadline of December 11, 2026.

POSTED

DEADLINE

SATCOM Ground Segment & Terminal HardwareThis subcontract opportunity involves the supply and installation of ground stations and user terminals to support prime contractors on NATO Communications and Information Agency projects. The scope of work focuses on the design and delivery of user equipment and virtualized ground segments specifically engineered to maintain operational capabilities within contested environments. To ensure reliability, the project requires the use of RF hardware that is resilient against electromagnetic spectrum degradation and interference. Managed under the Department of Commerce's Bureau of Industry and Security, the contract is categorized under NAICS code 334220. The place of performance for these installations is located in Belgium. Interested parties must note the response deadline of December 3, 2026, to provide the necessary hardware and installation services for these critical communication segments.

Bureau Of Industry And Security

POSTED

DEADLINE

REQUEST FOR INFORMATION (RFI) - MULTI-CHANNEL MANPACK (MCMP) RADIO CAPABILITY

Solicitation # M67854-27-I-2001

The United States Marine Corps, through the Portfolio Acquisition Executive - Marine Corps, is conducting market research via Request for Information M67854-27-I-2001 to identify a Multi-Channel ManPack (MCMP) Radio capability. The government is seeking Commercial or Non-Developmental Items (NDI) that meet National Security Agency High-Assurance Communications Security modernization requirements and offer improved size, weight, and power attributes. The desired solution must be networkable for command and control at the lowest tactical level and be compatible with both mounted and dismounted configurations. To support rapid fielding, the government is primarily interested in technologies with a Technology Readiness Level of 8 or greater. This RFI is open to all businesses under NAICS code 334220, with a closing date of December 11, 2026. Because the technical specifications are contained in a Controlled Unclassified Information attachment, interested vendors must satisfy strict security requirements to gain access, including an active SAM.gov registration, a signed Non-Disclosure Agreement, and verification via a DD Form 2345, an SPRS NIST SP 800-171 score, or CMMC Level 2 certification. Respondents must provide a comprehensive information package including device specifications, production timelines, Rough Order of Magnitude costs for the system and source code, and a detailed approach to Supply Chain Risk Management and cyber-physical security.

POSTED

DEADLINE

Solicitation # N0010426QSD51

This contract outlines the requirements for the manufacture and supply of the Antenna Bicone, specifically identified by Cage Code 14304 and reference number RF-9070. The contractor is responsible for ensuring all items meet the specified design and quality standards, including physical identification according to MIL-STD-130 and packaging in accordance with MIL-STD 2073. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. The contractor maintains full responsibility for inspection and quality assurance, with the requirement to keep all inspection records for 365 days following final delivery. The government reserves the right to perform its own inspections to ensure compliance. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided documents and drawings are subject to specific distribution statements to control the safeguarding of information.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QXA21

Solicitation N00104-27-Q-XA21 is a Firm-Fixed Price (FFP) procurement issued by NAVSUP Weapon Systems Support for the repair of an antenna (NSN 5985-01-618-1082). The contract requires the repaired item to meet operational and functional requirements based on specific cage codes and reference numbers, with all inspection and testing performed according to original manufacturer specifications. Award will be made to a single, authorized source based on a determination of the most advantageous offer, where past performance is weighted as more important than price. Key requirements include strict adherence to MIL-STD-2073 for packaging, MIL-STD-129 for marking, and DFARS 252.211-7003 for IUID compliance. The contractor is responsible for all inspection and must maintain records for 365 days post-delivery. All shipments are FOB Destination with costs prepaid. Invoicing must be processed through the Wide Area Workflow (WAWF) system. Offerors must provide a cost breakdown, procurement lead time, and proof of authorized distributorship from the OEM if they are not the original manufacturer.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 14 days

AI Contract Overview

This subcontract opportunity with the Department of Defense ASC Commodities Division involves the manufacture and supply of Radio Frequency Cable Assemblies meeting NSN 6150 01 678 2650 specifications. The selected provider will utilize precision termination and testing equipment to produce these assemblies for delivery to DLA Depots. A critical requirement of the contract is the implementation of Counterfeit Electronic Part Detection and Avoidance Systems in strict accordance with DFARS 252.246-7007 and 252.246-7008. The project falls under NAICS code 334220 and is designated as a Total Small Business Set-Aside. Interested parties must submit their responses by the deadline of September 11, 2026. This procurement is designed to support prime contractors on DLA supply contracts through the delivery of high-specification RF cable assemblies.

General Info

DoD subcontract for RF cable assemblies, small business set-aside, due September 11, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-R-XD12.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, RADIO FREQUENCY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 28

subcontract

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures and supplies Radio Frequency Cable Assemblies for prime contractors on DLA supply contracts. Produces assemblies meeting NSN 6150 01 678 2650 specifications using precision termination and testing equipment. Implements Counterfeit Electronic Part Detection and Avoidance Systems per DFARS 252.246-7007 and 252.246-7008. Delivers finished RF cable assemblies to DLA Depots.