Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Shop Equipment Installation Kit

Open

Federal

Response Deadline11/17/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of shop equipment installation kits for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The scope of work includes the fabrication or sourcing of components for NSN 4920-01-381-4358, with strict adherence to sampling standards MIL-STD-1916 or ASQ H1331. All deliverables must be packaged according to ASTM D3951 and RP001, and marked in compliance with MIL-STD-129, with final delivery terms set as FOB Origin. The contract is categorized under NAICS code 339999 and requires the provider to maintain DFARS 252.204-7012 cybersecurity compliance. Performance for this Department of Defense requirement is centered in Cherry Point. Interested parties must note the response deadline of November 17, 2026.

General Info

Manufacturing and supplying shop equipment installation kits for DLA by November 17, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-27-T-0320.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSTALLATION KIT, SH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 12:00:00 PM ESTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Installation Kits for shop equipment for prime contractors delivering DLA Weapons Support Aviation Supply Chain contracts. Fabricates or sources components for NSN 4920-01-381-4358, performing sampling per MIL-STD-1916 or ASQ H1331. Packages per ASTM D3951 and RP001 and marks packaging per MIL-STD-129. Requires DFARS 252.204-7012 cybersecurity compliance. Delivers completed kits FOB Origin.

Similar Contracts

Same NAICS industry code

Promotional Hard Goods and NoveltiesThis subcontract for Promotional Hard Goods and Novelties involves the supply and production of non-apparel promotional items, including water bottles, USB drives, mugs, and pens, for prime contractors serving the University of Washington. The scope of work includes applying university branding through specialized methods such as UV printing, laser engraving, and pad printing, with the final branded goods delivered directly to various university departments. To be eligible, providers must maintain IMGCL licensing and strictly adhere to the University of Washington Code of Conduct regarding labor practices. The contract is categorized under NAICS code 339999, with a response deadline set for December 11, 2026.

University of Washington

POSTED

about 12 hours ago

DEADLINE

Perfusion Tubing and Monitoring Component Supplier

University Of Iowa

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Playground Equipment Manufacturer/SupplierThis subcontract agreement establishes a partnership for the manufacture and supply of specialized playground equipment for prime contractors working on City of Valdosta park projects. The scope of work focuses on the Nucleus product line, utilizing specific technical requirements including KoreKonnect direct-bolt clamp systems, EZKonnect platform mounting, and UV-20 additive rotomold plastics designed according to Universal Design principles. All delivered components must adhere to strict industry standards, specifically ASTM-1487, IPEMA, ISO 9001:2015, and ISO 14001:2015. Logistically, the supplier is responsible for delivering all equipment components on an FOB Destination basis. The opportunity was posted on November 10, 2026, with a response deadline of November 17, 2026. This procurement falls under NAICS code 339999 and is managed through the state of Georgia for the benefit of the City of Valdosta.

City of Valdosta

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Naval ElectronicsThis subcontract for the Department of Defense involves providing specialized military packaging and marking services for naval electronics intended for DLA supply contracts. The contractor is responsible for ensuring all shipments are processed and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Specific palletization requirements must be implemented per RP001, utilizing precise packaging data including QUP:001, Pres Mthd:10, Clng/Dry:1, Unit Cont:D3, and Intrmdte Cont:E5. The final deliverable is a fully packaged and marked shipment ready for transport to FPO 96607. This opportunity falls under NAICS code 339999 and was posted on November 10, 2026, with a response deadline of November 20, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Nonmetallic Hose Assemblies (NSN 4720-01-417-5860)This subcontract involves the manufacturing of 50 nonmetallic hose assemblies under NSN 4720-01-417-5860 for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected contractor must utilize non-additive manufacturing processes to fabricate the assemblies, ensuring all items are marked according to RQ017 and packaged in compliance with MIL-STD-2073-1E and MIL-STD-129 standards. Performance of this contract requires the provider to hold US/Canada Joint Certification Program certification and maintain strict adherence to RA001 quality standards. The work is to be performed in Anniston, Alabama, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Gasket (NSN 5330-01-690-7979)This subcontract involves the procurement of one asbestos-free gasket, identified by NSN 5330-01-690-7979, for the USS Manchester LCS 14. The item is to be delivered FOB Destination to DLA Weapons Support. The contractor is responsible for manufacturing or procuring the part in strict accordance with the DLA Master List of Technical and Quality Requirements. Compliance with the Buy American Act and the Berry Amendment is mandatory. Additionally, the gasket must be packaged in waterproof and greaseproof bags following MIL-DTL-117 standards and marked according to MIL-STD-129. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Kitting and Packaging ServicesThis subcontract for MIL-SPEC Kitting and Packaging Services supports the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for performing military-grade packaging and kitting for prime contractors, which includes consolidating components into kits with detailed contents lists. All work must adhere to strict military standards, specifically MIL-STD-129 for marking and bar-coding and MIL-STD-2073-1 Appendix D for preservation packaging, utilizing MIL-SPEC compliant cushioning and shipping containers. The primary deliverable for this engagement is the provision of three fully packaged and bar-coded Valve Parts Kits. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026, falling under NAICS code 339999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

Gasket Supply (NSN 5330123152452)This subcontract involves the manufacture or sourcing of 89 to 100 asbestos-free gaskets meeting NSN 5330123152452 specifications for prime contractors under Department of Defense supply contracts. The items must be packaged in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, with marking requirements adhering to MIL-STD-2073-1E and MIL-STD-129. The contract is managed by the Land Supplier Opns Vehicle Spt agency and requires strict adherence to the Buy American Act, the Berry Amendment, and NIST SP 800-171 compliance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339999.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

USMC Combat Instructor Award Ribbon ManufacturerThis subcontract through C and T Supply Chain for the Department of Defense involves the manufacture of 8,000 USMC Combat Instructor award ribbons under NSN 8455-01-647-3640. The selected manufacturer must produce the ribbons to exact USMC specifications and obtain certification from The Institute of Heraldry. Compliance with MIL-S-3951, MIL-STD-129, and MIL-STD-2073-1E standards is mandatory, and the contractor is required to submit five first article samples for approval prior to full production. The project falls under NAICS code 339999 and is intended for prime contractors on DLA Troop Support supply contracts. Performance will take place in zip code 85043. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a response deadline of November 17, 2026.

C AND T SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC ESD and EMI Protective Packaging SupplyThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Active Devices Division for the supply of specialized protective packaging materials. The scope of work involves providing DOD-qualified ESD and EMI shielding materials essential for the shipment of sensitive microcircuits. All deliverables must strictly comply with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129 standards to ensure the integrity of components handled by prime contractors. The contract is designated as a Total Small Business Set-Aside under NAICS code 339999, with the place of performance located in Columbus, Ohio. Interested parties must submit their responses by November 20, 2026. This procurement focuses on maintaining high-specification military standards for the protection of critical electronic hardware during transit.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Aerospace Seal and Gasket SupplyThis subcontract opportunity is for the supply of specialized seals, O-rings, and gaskets used in Oxygen Converter Overhaul Kits for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing components from non-combustible, oxygen-compatible elastomers and polymers, ensuring all deliverables include material certifications to guarantee safety and compatibility with breathable oxygen. The project is a total small business set-aside under NAICS code 339999, managed by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. Performance will take place at Tinker AFB, with a response deadline set for November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Gasket Fabrication - NSN 5330-99-695-2792This subcontract involves the manufacture and supply of 111 gaskets for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The fabrication must strictly adhere to NSN 5330-99-695-2792 and the DLA Master List of Technical and Quality Requirements RA001. All provided materials must be certified as asbestos-free and mercury-free, with marking and labeling compliant with MIL-STD-130N and MIL-STD-129 standards. The finished gaskets are to be delivered FOB Origin to DLA Distribution in Warner Robins, Georgia. This procurement falls under NAICS code 339999, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Same awarding agency

Aerospace Grade Raw Material SupplyThis subcontract involves the supply of certified aerospace-grade raw materials for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The scope of work focuses on sourcing specific alloys necessary for the manufacture of structural aircraft fittings, specifically part number 70217-02704-107. To ensure compliance with DLA Directive Procurement Note C03, the provider must deliver full traceability documentation, including comprehensive material certifications and Mill Test Reports. The project is managed under the Department of Defense and is categorized under NAICS code 331210. Performance for this contract will take place in San Diego, California. Interested parties should note the response deadline of November 17, 2026, for this procurement effort.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 18 hours ago

DEADLINE

Aircraft Structural Fitting FabricationThis subcontract involves the fabrication of aircraft structural fittings for the DLA Weapons Support Aviation Supply Chain. The project requires the precision machining of 28 units of NSN 1560-01-651-0008, identified as Sikorsky part number 70217-02704-107, which are classified as Critical Application Items. Performance standards include bare item marking and zero-non-conformance sampling in accordance with MIL-STD-1916, with all finished fittings requiring full supply chain traceability. The work will be performed in San Diego, California, under NAICS code 336413. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 and NIST SP 800-171 compliance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aviation-Grade Electrical Component SupplyThis subcontract for Aviation-Grade Electrical Component Supply supports the DLA Weapons Support Aviation Supply Chain by providing raw materials and specialized components to prime contractors. The scope of work focuses on sourcing military-grade cabling and connectors specifically adhering to Drawing 53711 7572387. All deliverables must include kitted components and material certifications to ensure strict quality control. The contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. Additionally, Certificates of Conformance must be provided for all materials to verify aviation airworthiness. Performance for this contract is centered in Texarkana, Texas, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of a special purpose electrical cable assembly for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for producing one completed and tested assembly under NSN 5995-01-659-3742, adhering strictly to Basic Drawing NR 53711 7572387, Revision A. Quality assurance must be maintained through the use of MIL-STD-1916 or ASQ H1331 sampling plans, and the final product must be packaged according to MIL-STD-2073-1E. The project requires strict adherence to security and regulatory standards, specifically CMMC Level 2 and ITAR/EAR compliance. Performance of the contract will take place in Texarkana, Texas. Interested parties must respond by November 17, 2026, to fulfill the requirements of this Department of Defense procurement under NAICS code 335931.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aviation-Grade Wire Rope Material SupplyThis subcontract for Aviation-Grade Wire Rope Material Supply supports prime contractors fulfilling DLA supply contracts for the Department of Defense. The scope of work involves the delivery of certified raw high-strength wire rope material that strictly adheres to MIL-DTL-87218 specifications and meets all QPL/QML approved source requirements. To ensure full supply chain traceability, the provider must supply certified material test reports with all deliveries. The contract is managed under the DLA Weapons Support Aviation Supply Chain, with the place of performance located at Robins Air Force Base. Operating under NAICS code 332618, the opportunity was posted on November 10, 2026, with a response deadline of November 17, 2026.

Other Fabricated Wire Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aviation Wire Rope Assembly FabricationThis subcontract for the Department of Defense, specifically the DLA Weapons Support Aviation Supply Chain, involves the fabrication of 14 aviation-grade wire rope assemblies. The assemblies must be manufactured according to NSN 4010-01-006-5133 and MIL-DTL-87218 using QPL-87218 standards, with quality control managed through zero-based sampling plans per MIL-STD-1916. Performance will take place at Robins Air Force Base. To be eligible, the contractor must maintain ISO 9001:2015, SAE AS9100, and CMMC Level 2 certifications. The scope of work includes the complete fabrication, packaging, and marking of the assemblies for delivery to prime contractors. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

ESD/EMI Protective Packaging and Specialized MarkingThis subcontract involves providing specialized protective packaging and marking services for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The scope of work requires the use of DOD-qualified ESD and EMI materials to package sensitive electronics in strict accordance with MIL-PRF-81705. Additionally, the contractor must apply special marking code 39 following MIL-STD-129 guidelines and utilize approved field force protective work stations for all handling processes. The project is performed at Tinker AFB, with final delivery of the packaged and marked components to the DLA Distribution Depot Oklahoma. This effort falls under NAICS code 334419 and is managed by the Department of Defense. Interested parties should note the response deadline of November 17, 2026.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Precision Fabrication of Electrical Card Retainer-EjectorsThis subcontract involves the precision fabrication of eight Retainer-Ejector components for electrical cards, supporting the DLA Weapons Support Aviation Supply Chain. The project requires the manufacture of mechanical retainers under NSN 5998-00-313-5275, utilizing precision machining to meet strict aviation-grade tolerances and DLA Master List technical requirements. The contractor must adhere to a zero non-conformance policy and perform quality sampling in accordance with MIL-STD-1916 or ASQ H1331. Performance for this Department of Defense contract will take place at Tinker AFB, with a response deadline set for November 17, 2026.

POSTED

about 18 hours ago

DEADLINE

Supply of Time Totalizing Meters (NSN 6645-01-141-7603)This subcontract involves the supply of six 28.0 volt DC electrical time totalizing meters, specifically part number 16G9CF28-136 from Talley Industries General Times Corp. Electrodynamics Div., to support DLA Weapons Support Aviation Supply Chain contracts. The items are to be delivered to Yokosuka, Japan, and must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Compliance requirements include quality assurance according to MIL-STD-1916 or ASQ H1331, as well as a CMMC Level 2 self-assessment. The procurement falls under NAICS code 334519 and is managed by the Department of Defense.

Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Precision Manufacturing of Lubricating NozzlesThis subcontract involves the precision machining and fabrication of 32 certified lubricating nozzles for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for CNC machining the components to Honeywell part number 365399-1 specifications and applying aerospace-grade finishes in accordance with NSN 2835-00-321-4968 TDP. To qualify for this project, the provider must hold AS9100 or ISO 9001 certification and ensure full compliance with MIL-STD-1916/ASQ H1331 standards. The opportunity was posted on November 10, 2026, with a response deadline of November 17, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Lubricating Nozzles, Power Take-OffThis subcontract involves the procurement and delivery of 32 Lubricating Nozzles for Power Take-Off systems to support prime contractors under the DLA Weapons Support Aviation Supply Chain. The specific requirement is for Honeywell Aerospace US LLC part number 365399-1, identified by NSN 2835-00-321-4968. The items are to be delivered FOB Origin. The contractor is responsible for adhering to strict military standards for quality and logistics. This includes performing quality sampling according to MIL-STD-1916 or ASQ H1331, ensuring marking complies with MIL-STD-129, and following packaging guidelines set by MIL-STD-2073-1E and DLA RP001. The contract falls under NAICS code 423840 and is managed by the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Aerospace-Grade Alloy for Thread InsertsThis subcontract involves the supply of aerospace-grade raw metal alloy stock intended for thread inserts under the DLA Weapons Support Aviation Supply Chain. The materials must strictly adhere to the chemical and physical properties outlined in the NAS1130 specification and comply with the Buy American Act. To ensure full traceability for these critical application items, the provider is required to deliver certified raw material stock along with Material Test Reports and Certificates of Conformance. The project is managed by the Department of Defense and is categorized under NAICS code 331210. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 17, 2026, for this specific procurement effort.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 18 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Identification Markers (NSN 7690-01-498-0865)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military-Grade Packaging and Kitting Services

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military Standard Packaging Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Manufacture of Coupling Seals (NSN 1560-01-084-6765)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE1C1-27-Q-0151

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE2DS-27-T-1573

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BEZEL, EYEBROW ASSY

Solicitation # SPE4A6-27-R-X017

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4491

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4490

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4492

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Preservation and Packaging Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

EMI Gel Gasket Supply

NASA Shared Services Center

POSTED

DEADLINE

in about 11 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS