Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacturing of Military-Grade Electrical Leads

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates full-cycle production of military-grade electrical leads strictly according to approved technical drawings, encompassing every stage from fabrication and assembly to rigorous inspection, secure packaging, and timely shipment. All work must adhere to stringent defense standards, ensuring reliability and performance under demanding operational conditions. The scope requires precise compliance with specifications, quality control protocols, and documentation requirements typical of military supply chains, with no tolerance for deviation from provided designs or procedures. This subcontract is issued by the ASC Commodities Division under the Department of Defense, classified under NAICS code 334419 for other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, with a firm deadline for responses on July 28, 2026. Performance will occur at the contractor’s facility without a specified location, and all deliveries must meet military logistics timelines. The contract does not include set-aside provisions, and interested parties must submit proposals through the official DIBBS portal by the stated deadline to be considered.

General Info

Produce military-grade electrical leads per approved drawings, meet defense standards, deliver by deadline via DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full-cycle production of electrical leads per military technical drawings, including fabrication, inspection, packaging, and shipment.

Similar Contracts

Same NAICS industry code

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture and delivery of 40 units of a special-purpose electrical cable assembly identified by NSN 5995016021620, fully compliant with military specifications and subjected to MIL-STD-129 packaging and hazard labeling requirements. This is a subcontract under a total small business set-aside, exclusively reserved for small businesses as defined by the SBA under FAR 19.5, and falls under the NAICS code 334419 for other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and is managed by the ASC Commodities Division of the Department of Defense. While specific performance location and point of contact details are not provided, the work must meet all technical, packaging, and safety standards outlined in applicable military directives, ensuring full readiness for federal use.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract solicits the manufacture and delivery of a minimum of one and up to nine units of a special-purpose electrical cable assembly identified by NSN 6150-01-540-1482 and part number 3584372, with all units required to meet stringent Department of Defense technical specifications and military standards. The work must be performed in accordance with DLA requirements and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring eligibility and compliance with FAR 19.5 guidelines. The North American Industry Classification System code 334419 applies, indicating this is for other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, with responses due no later than August 4, 2026, and is structured as a subcontract opportunity under the Strategic Acquisition Program Directorate within the Department of Defense. All deliveries must comply with the specified technical and quality controls associated with the cable assembly, and the performance location is not designated, implying flexibility in manufacturing site selection as long as all contract conditions are met. The opportunity is accessible via the DIBBS portal, and bidders must ensure full alignment with federal procurement rules and military specifications to be considered eligible for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Radio Frequency Interference (RFI) Filter SupplyThe contract requires the supply of 34 units of Commercial Off-The-Shelf Radio Frequency Interference Filters, identified by part number M15733/49-0005 and NSN 5915013399095, which must fully comply with MIL-PRF-15733/49L specifications and DLA Master List requirements. These filters are designated for critical applications where performance and reliability are essential, necessitating strict adherence to military standards and quality controls. The items are to be delivered to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract falls under the NAICS code 334419 for other electronic component manufacturing. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a narrow window for submission. The contract type is a subcontract, and while no specific set-aside designation is provided, it is issued by the Active Devices Division under the Department of Defense. The procurement is managed through the DLA BSM system, and interested parties must access the official UI link to submit responses. All suppliers must ensure compliance with technical specifications, delivery timelines, and defense logistics requirements to qualify for award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Sensitive Electronic Switch ManufacturingThe contract outlines the manufacture and delivery of five sensitive electronic switches designated by NSN 5930-01-264-1728, requiring strict adherence to Department of Defense technical standards, specifically MIL-STD-1916 or ASQ H1331 sampling plans and acceptable quality limit defect thresholds. The work must be completed in compliance with these rigorous quality control protocols to ensure operational reliability and conformity to military specifications. Performance of the contract is required at Tinker Air Force Base, Oklahoma, with a delivery schedule aligned to the posted response deadline of July 31, 2026, and a solicitation posted on July 20, 2026. This is a subcontract opportunity under NAICS code 334419, managed by the Electrical Devices Division of the Department of Defense, with no specific set-aside designation applied. All proposals must be submitted before the deadline to be considered for award.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Wiring Harness Manufacturing and AssemblyThe contract involves the manufacture and assembly of 2,060 military-specification electrical wiring harnesses identified by NSN 6150-01-248-2549, requiring full traceability throughout production and compliance with strict packaging standards. All units must be delivered to locations within the continental United States as directed by order, ensuring timely and precise fulfillment of military logistics needs. The work is classified as a subcontract under NAICS code 334419, with the Defense Logistics Agency acting on behalf of the Department of Defense to oversee procurement. The solicitation was posted on July 20, 2026, and performance will be coordinated through the established DLA contracting framework using the referenced award number SPE4A626D5714.

Defense Logistics Agency

POSTED

DEADLINE

Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)The contract entails the manufacture and delivery of seven qualified linear microcircuits identified by NSN 5962-01-281-4172 and designated as RD004, all of which must adhere to stringent military specifications ensuring performance, reliability, and environmental resilience. Each unit requires full traceability throughout the production lifecycle, from raw materials to final assembly, to guarantee authenticity and compliance with defense standards. In addition to hardware specifications, the supplier must implement and maintain CMMC Level 2 cybersecurity controls to safeguard controlled unclassified information during manufacturing, handling, and communication, ensuring alignment with Department of Defense cybersecurity requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 334419 for other semiconductor and related device manufacturing. The contract is not subject to a specific set-aside designation and does not specify a place of performance or point of contact. The solicitation was posted on July 20, 2026, and the award reference is identified as SPE7M126P8879. Compliance with all technical, quality, and cybersecurity provisions is mandatory, and failure to meet these obligations could result in rejection of delivery or contract termination. The supplier is expected to demonstrate proven capability in defense electronics manufacturing and secure supply chain practices.

Defense Logistics Agency

POSTED

DEADLINE

Rotary Switch Supply (Commercial Off-the-Shelf Item)The contract involves the supply of 11 units of a commercial off-the-shelf rotary switch identified by NSN 5930011333696, a component that meets military specifications despite being commercially available. The item is classified under NAICS code 334419, indicating its alignment with electronic component manufacturing, and is being procured as a subcontract under the Department of Defense via the Defense Logistics Agency. Although the solicitation number is not provided and no specific place of performance or point of contact is listed, the contract was posted on July 20, 2026, signaling its placement in the future procurement timeline. The absence of set-aside classification suggests the contract is open to any qualified commercial supplier without restrictions based on business size or status. The electronic component will support defense systems requiring reliable, specification-compliant rotary switches sourced from the commercial market.

Defense Logistics Agency

POSTED

DEADLINE

LIGHT, INDICATORThe contract pertains to the procurement of six LIGHT, INDICATOR units with NSN 6210-01-316-4583 and part number 70902-41838-101, supplied by DUCOMMUN LABARGE TECHNOLOGIES, INC. The units are priced at $6.00 each, totaling $36.00, with delivery required within 20 days under FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly adhere to MIL-STD-2073-1E standards with specific preservation, wrapping, and unit containment requirements. Marking of the shipment must comply with MIL-STD-129, with no special marking codes applied, and palletization must meet DLA packaging guidelines. The delivery destination is the 2nd Supply Depot in Busan, South Korea, with the freight forwarder and transportation details governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and the acquisition falls under the Defense Logistics Agency, with the solicitation number SPE8E7-26-T-3264. Covered Defense Information may apply, and documentation for source approval must be submitted in accordance with RC001. The required delivery date is June 17, 2026, and the contract is subject to DLA’s unit of issue standards and oversight for government use, with designated administrative codes for distribution and advancement.

Defense Logistics Agency

POSTED

DEADLINE

SWITCH, PUSHThe item is a PUSH SWITCH with NSN 5930-01-316-7681, quantity of 23 units, under purchase request 7017436985, with a delivery schedule of 157 days ADO. This item is classified as non-CAI and non-CSI and is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. The technical data is governed by DFARS 252.225-7048, and access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and are formally approved by DLA to access such information. The solicitation number is SPE7M2-26-T-5696, posted on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334419. The contracting office is the Department of Defense’s Nuclear Reactor Program, with performance taking place in San Diego, California, and primary point of contact being Alisha Blanton.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

SWITCH ASSEMBLYThe contract pertains to the procurement of a SWITCH ASSEMBLY with NSN 5930-01-605-5090 and part number 159400G1, under solicitation SPE7M2-26-T-5695, issued by the Department of Defense’s Nuclear Reactor Program. Ten units are required, to be delivered FOB origin within 144 days of contract award, with no tolerance for quantity variance. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation, all in alignment with the latest revisions. Packaging must be palletized per RP001 and labeled with the specified pack code U, with all markings and procedures meeting federal standards. Strict prohibitions apply to the intentional addition of mercury or mercury-containing compounds in or contacting the switch assembly, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions tied to the solicitation issue date. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the delivery must be completed no later than December 23, 2026, despite an original required delivery date of September 1, 2027. The unit of issue is each, priced at $10.00 per unit, with total contract value of $100.00.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

SWITCH, PUSHThe contract pertains to the procurement of 14 units of a PUSH SWITCH with NSN 5930-01-226-8184 under solicitation SPE7M8-26-T-5454, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 157 days after award, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. The acquisition falls under NAICS code 334419 and is subject to DLA Packaging Requirements for Procurement, which reference technical and quality standards from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary compliant with NAVSEA 5100-003D. The offeror must submit a complete data package for both the primary and alternate parts, as no existing data is available for this item. Performance is designated for New Cumberland, PA, with Dondiego Boler listed as the primary point of contact for inquiries.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

LEAD, ELECTRICALThis contract is for a single unit of Lead, Electrical, identified by Part Number 868001113 and NSN 6150-12-359-5761, issued under solicitation SPE4A0-26-T-3971 by the Department of Defense through DLA. The item is classified as a critical application and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the specified URL. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking required. The supply must be delivered FOB origin within five days of the contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Sampling follows MIL-STD-1916 or equivalent zero-based inspection methods, with acceptance criteria of zero non-conformances unless otherwise specified. The item must be shipped via traceable freight, not parcel post, to the receiving point at Fort Carson, Colorado. Documentation for source approval is required, and any government identification must be removed from non-accepted supplies. The contract mandates compliance with DLA packaging and identification standards, including palletization and intermediate container requirements. The required delivery date is July 13, 2026, and the point of contact is Danita Davis from DLA.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.

Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.

Engineering Services

POSTED

about 1 hour ago

DEADLINE

Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.

Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

GAGE, PRESSURE, DIAL INDICATINGThe contract pertains to the procurement of a single dial pressure gauge with NSN 6685-01-131-8110 under solicitation SPE4A6-26-R-XB17, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item manufactured by Ashcroft Inc with part number EA24-3PHP-EWB0 and must be delivered in one unit at a firm fixed price with no variance allowed in quantity. Delivery is required 224 days after the award date, with inspection and acceptance occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E and MIL-PRF-23199 standards, including marking, labeling, and bar coding per MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The contract incorporates all technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling for quality assurance must align with MIL-STD-1916 or ASQ H1331, Table 1, with attributes assigned specific verification levels or AQLs; zero non-conformances are required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in materials, packing, preservation, or marking except for limited authorized uses such as batteries, fluorescent lamps, or specified instruments, which must include secondary containment and shock-proof design. Hazardous materials handling, packaging, and shipping must adhere to IP025 and IP056 provisions, ensuring no mercury is present in any packaging elements. All logistics and transportation directives are governed by DLAD procedural notes C19 and C20.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 1 hour ago

DEADLINE

Transportation and Delivery Logistics (Including Sea Transport)The contract encompasses the comprehensive arrangement and execution of transportation logistics, with a specific focus on sea transport, to support Department of Defense operations. All activities must strictly comply with DFARS 252.247-7023, ensuring adherence to defense-related transportation regulations, and must utilize the Wide Area WorkFlow system for invoicing to meet federal financial reporting standards. The solicitation is a subcontract under a Total Small Business Set-Aside designation, restricting eligibility solely to small businesses as defined by the Small Business Administration, and is classified under NAICS code 483111 for water transportation of crude oil or petroleum products. Performance is designated for Cherry Point with a zip code of 28533-5040, indicating the primary operational location for delivery and logistics activities. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and timely submission of Safety Data Sheets for all hazardous materials used in packaging or preservation processes, ensuring full compliance with OSHA’s Hazard Communication Standard and Federal Standard No. 313. All SDS must be accurate, up to date, and formatted according to regulatory requirements to support workplace safety and regulatory audits. The work is tied to hazardous material handling within the Department of Defense’s ASC Commodities Division, with performance specifically located at Cherry Point, North Carolina, 28533-5040. This is a Small Business Set-Aside subcontract under NAICS code 541620, restricted to small businesses as defined by the SBA, and is open for response until July 28, 2026. The solicitation is managed through the DLA DIBBS system and does not specify a point of contact, requiring potential offerors to review the complete posting on the provided DIBBS link for full submission requirements. Compliance with federal safety standards is mandatory, and failure to properly document and submit SDS could result in non-compliance and contract termination.

Environmental Consulting Services

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for bearings, strictly adhering to the standards outlined in MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. All work must include thorough quality verification procedures and comprehensive recordkeeping to ensure full compliance with Department of Defense requirements. The services are intended for delivery to the specified place of performance in Cherry Point, North Carolina, with all packaging and labeling executed to meet rigorous military specifications for durability, traceability, and environmental protection throughout the supply chain. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility exclusively to small businesses certified by the SBA. The North American Industry Classification System code 493190 applies, indicating the work falls under other warehousing and storage services. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal by the specified deadline to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Cylindrical Roller Bearing Supply (Source-Controlled Manufacturer)The contract mandates the supply of 55 units of a cylindrical roller bearing identified by Part No. 580274-1 and NSN 3110010087937, manufactured and tested exclusively by an approved source under proprietary limited rights data and stringent military specifications. The product must comply with all required technical and quality standards as defined by defense protocols, ensuring reliability and performance in critical military applications. Production and delivery are subject to strict sourcing controls, requiring adherence to certified manufacturing processes and testing procedures validated by authorized entities. This is a subcontract under a Total Small Business Set-Aside designation, restricted to small businesses as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code 332991 applies, indicating the work falls under other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with responses due by July 28, 2026, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-5040. The awarding agency is the ASC Commodities Division under the Department of Defense, and the procurement is accessible via the DIBBS system for interested small business vendors.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE