Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

SWITCH ASSEMBLY

Active
SPE7M2-26-T-5695Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SWITCH ASSEMBLY with NSN 5930-01-605-5090 and part number 159400G1, under solicitation SPE7M2-26-T-5695, issued by the Department of Defense’s Nuclear Reactor Program. Ten units are required, to be delivered FOB origin within 144 days of contract award, with no tolerance for quantity variance. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation, all in alignment with the latest revisions. Packaging must be palletized per RP001 and labeled with the specified pack code U, with all markings and procedures meeting federal standards. Strict prohibitions apply to the intentional addition of mercury or mercury-containing compounds in or contacting the switch assembly, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions tied to the solicitation issue date. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the delivery must be completed no later than December 23, 2026, despite an original required delivery date of September 1, 2027. The unit of issue is each, priced at $10.00 per unit, with total contract value of $100.00.

General Info

Procure 10 switch assemblies, NSN 5930-01-605-5090, FOB origin, delivered to New Cumberland by Dec 23, 2026, per DLA packaging and mercury restrictions.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5695 for DLA Land and Maritime Nuclear Reactor Program

PDFrfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS

Full Description

Show more
SWITCH ASSEMBLY
SWITCH ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
LOCKHEED MARTIN CORP 94271 P/N 159400G1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017316368 0001 EA 10.000
NSN/MATERIAL:5930016055090
DELIVERY (IN DAYS):0144
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M2-26-T-5695
SECTION B
PR: 7017316368 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-28786, FOR SWITCHES.
..
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/23/2026 Original Required Delivery Date:09/01/2027
SPE7M2-26-T-5695 NSN/Part Number: 5930-01-605-5090 Quantity: 10 EA Purchase Request: 7017316368QTY: 10 Delivery: 144 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)The contract entails the manufacture and delivery of seven qualified linear microcircuits identified by NSN 5962-01-281-4172 and designated as RD004, all of which must adhere to stringent military specifications ensuring performance, reliability, and environmental resilience. Each unit requires full traceability throughout the production lifecycle, from raw materials to final assembly, to guarantee authenticity and compliance with defense standards. In addition to hardware specifications, the supplier must implement and maintain CMMC Level 2 cybersecurity controls to safeguard controlled unclassified information during manufacturing, handling, and communication, ensuring alignment with Department of Defense cybersecurity requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 334419 for other semiconductor and related device manufacturing. The contract is not subject to a specific set-aside designation and does not specify a place of performance or point of contact. The solicitation was posted on July 20, 2026, and the award reference is identified as SPE7M126P8879. Compliance with all technical, quality, and cybersecurity provisions is mandatory, and failure to meet these obligations could result in rejection of delivery or contract termination. The supplier is expected to demonstrate proven capability in defense electronics manufacturing and secure supply chain practices.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of six LIGHT, INDICATOR units with NSN 6210-01-316-4583 and part number 70902-41838-101, supplied by DUCOMMUN LABARGE TECHNOLOGIES, INC. The units are priced at $6.00 each, totaling $36.00, with delivery required within 20 days under FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly adhere to MIL-STD-2073-1E standards with specific preservation, wrapping, and unit containment requirements. Marking of the shipment must comply with MIL-STD-129, with no special marking codes applied, and palletization must meet DLA packaging guidelines. The delivery destination is the 2nd Supply Depot in Busan, South Korea, with the freight forwarder and transportation details governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and the acquisition falls under the Defense Logistics Agency, with the solicitation number SPE8E7-26-T-3264. Covered Defense Information may apply, and documentation for source approval must be submitted in accordance with RC001. The required delivery date is June 17, 2026, and the contract is subject to DLA’s unit of issue standards and oversight for government use, with designated administrative codes for distribution and advancement.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESSThe contract pertains to the procurement of a wiring harness identified by NSN 6150-01-618-3328 and part number 3911818, with a quantity of 13 units to be delivered FOB origin within 275 days from the contract date, targeting a required delivery date of April 22, 2027. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required, and must be palletized according to DLA guidelines. The material has no shelf life restriction and is subject to sampling procedures in accordance with MIL-STD-1916 or ASQ H1331 Table 1, where critical, major, and minor attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are considered major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise stated in the contract. Inspection and acceptance occur at the destination, and the unit price is $13.00 per EA for a total price of $169.00. The delivery address is DLA Distribution Red River, Building 499, Texarkana TX 75507-5000, and all transportation details adhere to DLAD Proc Notes C19 and C20. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the relevant revision controlled by the solicitation issue date for simplified acquisitions. The contract is issued under SPE7L5-26-T-4338 and classified under NAICS code 334419, with procurement information and contact details provided by Bradley Evans at the Department of Defense.
LAND SUPPLIER OPNS ENGINES

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVEThe contract pertains to the procurement of a SWITCH, SENSITIVE with NSN 5930011968357, quantity of 529 units, under solicitation SPE7M8-26-T-5240, with a delivery schedule of 168 days ADO and FOB ORIGIN terms. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for non-hazardous goods and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including barcoding, with palletization following RP001 guidelines. Sampling methods require zero non-conformance acceptance per MIL-STD-1916 or ASQ Z1.4, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are classified as major. The contract includes mandatory FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards, electronic invoicing via WAWF, export control, prohibitions on hexavalent chromium and covered Chinese military company items, and safeguarding covered defense information. Contractor compliance with the DFARS 252.204-7012 clause on cyber incident reporting and NIST SP 800-171 assessment requirements is enforced. The solicitation requires submission via DIBBS by the July 20, 2026 deadline and mandates a Valid Unique Entity ID and CAGE code. Payment processing is governed by WAWF with no alternative invoicing methods permitted. The contract does not specify pricing for this solicitation but references historical prices for context, and no option quantities or extended pricing are provided. Evaluation factors and award basis are not explicitly defined, though compliance with technical and quality requirements appears decisive. The clause 252.223-7001 requires hazardous material labeling per OSHA’s Hazard Communication Standard unless precluded by other federal statutes, with pre-award submission of labels and MSDS required. No key personnel
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLEThe contract solicitation SPE7M8-26-T-5353 seeks five units of the SWITCH,TOGGLE with NSN 5930011702136 under a DLA procurement, with delivery required 155 days after award at the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be packaged and labeled per MIL-STD-129 with palletization in accordance with RP001: DLA Packaging Requirements for Procurement, and all packaging requirements from the DLA Master List of Technical and Quality Requirements supersede commercial standards such as ASTM D3951. For hazardous materials as defined by FED-STD-313, packaging must meet TQ Requirement IP025, while non-hazardous items must use commercial packaging but remain subject to the DLA Master List’s stricter controls. Marking and labeling must include the Unit of Issue and Quantity per Unit Pack as specified, and barcoding must follow MIL-STD-129’s Data Matrix format. Inspection and acceptance occur at the destination, with delivery terms conflicting between FOB Origin in the CLIN and FOB Destination referenced elsewhere, requiring clarification. The contract mandates use of WAWF for invoicing and prohibits IPP. Compliance with DFARS clauses including NIST SP 800-171 for cybersecurity, Hazard Communication Standards, and Transportation of Supplies by Sea—Basic is required, with notification obligations for safety issues and potential levies on payments. Offerors must provide UEI and CAGE codes and represent their small business status or socioeconomic classification. No pricing is listed in the CLIN, and the contract type remains unspecified. The solicitation closes on July 23, 2026, and responses must be submitted electronically via DIBBS, with all administrative and financial details finalized in the award document.
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
BAR, LIFTINGThe contract pertains to the procurement of one unit of a BAR, LIFTING item with NSN 4933-00-495-6861 and part number 116C3827, issued under solicitation SPE4A0-26-T-3965 by the Department of Defense through DLA. Delivery is required within five days of award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001 DLA Packaging Requirements. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under vessel shipment protocols, with transportation governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical attributes are verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and bare item marking must comply with RQ017. The supplier must remove all government identification from non-accepted supplies per RQ011, and the item must be delivered by July 10, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency