Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacturing of Repair Kit, Protective (NSN: 6605010791890)

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete manufacturing, assembly, inspection, and packaging of 31 units of a protective repair kit per military specifications, including component sourcing and quality assurance.

Similar Contracts

Same NAICS industry code

Innovasea NexTrak AR Transponding Acoustic Release Receivers (24 units) with integrated underwater acoustic release capability, battery packs, activation probes, and associated accessories required for deployment as stationary acoustic telemetry receivers

Solicitation # 9250-27-R-RFIN-00007

Mississippi State University is seeking 24 Innovasea NexTrak AR Transponding Acoustic Release Receivers equipped with integrated underwater acoustic release functionality, along with配套 battery packs, activation probes, and all necessary accessories for use as stationary acoustic telemetry receivers. These devices are designed for long-term underwater deployment to monitor and track acoustic signals from tagged marine organisms, with the added capability of remote release for recovery. The solicitation, identified by number 9250-27-R-RFIN-00007, was posted on July 29, 2026, and responses are due by August 12, 2026. The procurement is categorized under state and local government procurement, with the contract to be performed within Mississippi. Debra Raines of Mississippi State University serves as the primary point of contact and can be reached via email at draines@procurement.msstate.edu for inquiries regarding the bid.

MISSISSIPPI STATE UNIVERSITY

POSTED

about 17 hours ago

DEADLINE

PAD, ELECTRODE, DEFIBRIL

Solicitation # SPE2DS-26-T-283N

The contract specifies the procurement of six sets of multifunction defibrillator electrode pads, designated by NSN 6515-01-605-9796, for use with Philips FR2 HeartStart defibrillators, manual defibrillators, and for ECG monitoring, external pacing, and synchronized cardioversion. The pads are designed for adult or infant/child patients and are compatible with preconnection to NSN 6515-01-603-0401 for routine self-testing. The supplier must be Philips North America LLC, with part number 989803149981, and must clearly identify the source and part number in all documentation. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container that ensures safe handling and delivery by common carriers at the lowest rate, with shipping containers suitable for export when necessary. Packaging must also align with ASTM D3951, but DLA Master List requirements take precedence. Each container must be labeled with the manufacturer name, CAGE code, date of manufacture prefixed by “MFD”, expiration or retest date, contract number, and lot number. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award. Delivery is FOB destination within 20 days of contract award, with zero tolerance for quantity variance. The shipment must be sent via the fastest traceable means, explicitly excluding parcel post, to the military delivery point in Kings Bay, Georgia. The required delivery date is July 30, 2026, and the contract is issued under solicitation SPE2DS-26-T-283N with a unit of issue of set (SE) at a unit price of $6.00 per set.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

VALVE, RESUSCITATOR

Solicitation # SPE2DS-26-T-283W

The valve resuscitator is a barrier system featuring three separate filtration layers and a one-way duck bill valve with ports on both the top and bottom, designed for adjustable pressure settings between 5 and 20 cm H2O. It includes a standardized 22mm ID connector compatible with any resuscitation bag flow diverter that has a 22mm connection and is individually packaged for sterile use. The unit of issue is a box containing ten units, each with a shelf life of sixty months. To ensure product integrity, no more than nine months may have passed from the manufacturer’s date to the delivery date to the government. The product is identified by NSN 6515-01-620-0444, with a purchase request for two boxes, requiring delivery within twenty days of award. Technical and quality specifications referenced under RA001, packaging requirements per RP001, and procedures for removing government identification from non-accepted supplies under RQ011 are governed by the DLA Master List of Technical and Quality Requirements. The solicitation is issued under contract number SPE2DS-26-T-283W, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain through the Office of Elizabeth Cruz, with performance directed to APO 09094-3219.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

LASER LEVELING DEVICE

Solicitation # SPE2DS-26-T-283D

The LASER LEVELING DEVICE is a specialized component designed for use with the CODMAN CSF EXTERNAL DRAINAGE SYSTEM, featuring a reusable bubble level and a Class 2 laser lamp to ensure accurate alignment during medical procedures. It is supplied as a single unit with the NSN 6515-01-612-7325, and the requirement is for one unit to be delivered within 20 days of award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders must clearly indicate the source and part number being offered. The solicitation, issued under SPE2DS-26-T-283D, has a response deadline of August 4, 2026, with performance to be delivered to APO 09094-3219. The procurement falls under NAICS code 334511 and is managed by the Department of Defense through its Medical Supply Chain division, with Patrick Esposito serving as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-283H

The contract is for a medical-grade, hypoallergenic ear plug item designated as PLUG,EAR with NSN 6515-01-606-4565, supplied in a unit of issue of one box containing twenty-five pairs. All units must be sealed in individual protective containers to prevent damage or breakage, and packed into commercial shipping containers suitable for safe transport by common carriers at the lowest possible rate to the delivery point at Fort Harrison, Montana, with a delivery deadline of twenty days after order placement. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and markings must be applied accordingly. Packaging and labeling requirements are governed by DLA’s technical and quality standards referenced in the DLA Master List, with applicable revisions determined by the solicitation or award date. The item is subject to DLA’s packaging requirements and procedures for removing government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-283H, issued on July 29, 2026, with responses due by August 4, 2026, under NAICS code 334511, representing medical device manufacturing, and is being procured by the Department of Defense’s Medical Supply Chain under the office of MD Surg FSF. Primary point of contact is Chandler Alvarez at Chandler.Alvarez@dla.mil or 267-608-7058.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-10HA

The contract pertains to the procurement of two units of a non-NSN instrumentation item with CAGE code 81205 and part number 5BB4AD4R5C, under solicitation SPE4A6-26-T-10HA. The total quantity required is two units, each priced individually with a total contract value determined by the unit price and quantity. Delivery is scheduled within 20 days of contract award and must be shipped FOB destination with no tolerance for variance in quantity—exactly two units must be delivered. Inspection and acceptance both occur at the destination point, which is the specified shipping address in Portsmouth, New Hampshire. Packaging must comply with ASTM D3951, but any higher-priority DLA Master List of Technical and Quality Requirements supersede it; all items must be marked and labeled in accordance with MIL-STD-129, with unit packaging and palletization following RP001 DLA Packaging Requirements. The shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The original required delivery date is July 28, 2026, and the item is to be delivered to the government facility identified by the DLA shipping instructions. The contract includes specific government-only tracking identifiers, including IPD, DIC, and FC codes. The responsible point of contact is Derrick Looney, and the procurement is managed under the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

ATTITUDE INDICATOR

Solicitation # SPE4A7-26-R-X975

The contract pertains to the procurement of a single Attitude Indicator identified by NSN 1680-01-657-6918, manufactured by RIEKER INSTRUMENT CO., INC. with part number 5002-R, under solicitation SPE4A7-26-R-X975, issued as a Total Small Business Set-Aside. The item is subject to a Firm Fixed Price arrangement with no variance allowed in quantity, and delivery is required within 87 days after award. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and marking as per MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and transportation details reference DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List, including tailored quality provisions, inspection protocols, and the requirement for zero non-conformances under a zero-based sampling plan aligned with MIL-STD-1916 or ASQ H1331, with verification levels assigned based on critical, major, and minor attributes. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and physical identification of the item must meet RQ017 marking requirements. All covered defense information is controlled under RD002, and the contractor must follow government procedures for removal of identification from non-accepted items.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M1-26-Q-1274

The contract specifies the procurement of 120 kits of thegas detector with NSN 6665-01-690-8588 under solicitation SPE7M1-26-Q-1274, issued as a total small business set-aside with a firm fixed price structure. Delivery is required within 100 days after award, with FOB origin and inspection and acceptance occurring at the destination. Packaging and preservation must comply strictly with MIL-STD-2073-1E, Appendix D, for kits, requiring that all components be individually protected against corrosion and damage, with loose hardware sealed in bags or boxes and no bulk shipping permitted. Preservation methods must match the most critical item within each kit, and every kit must include a parts list detailing component names, numbers, and quantities. Marking must adhere to MIL-STD-129, including serial numbers on unit, intermediate, and shipping containers, with matching serial data on the packing list. Packaging must also follow DLA’s standardized requirements and avoid any mercury or mercury compounds. The contract mandates zero-defect acceptance sampling under MIL-STD-1916 or equivalent zero-based plans, with verified attributes assigned specific verification levels or AQLs, and any unspecified attributes treated as major. If MIL-STD-105/ASQ Z1.4 is used, acceptance requires zero non-conformances unless otherwise stated. The detector model is specified as Honeywell Analytics Inc. P/N HU-X1W1H1M1Q1-Y-NV, and may contain batteries, subject to hazardous material handling rules. Pricing is structured in tiered quantity brackets from 120 to 300 units, with delivery scheduled at 100 days for all tiers. A required unit of issue is KT (kit), and all packaging elements must be fully compliant with DLA’s packaging requirements, including proper labeling and segregation per MIL-STD-2073-1 Appendix D. The contract includes technical and quality requirements referenced from the DLA Master List, and all materials must arrive in fully serviceable condition without requiring further sorting or repackaging by the end user.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

CATHETERIZATION KIT, UR

Solicitation # SPE2DS-26-T-283U

The contract specifies the procurement of a urethral catheterization kit, item NSN 6515016152124, packaged as a unit of issue (PG) containing ten individual kits. Each kit includes a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, sterile drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, a prefilled 10 cc sterile water syringe, forceps, and a prefilled 10 cc lubricant syringe. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. All packaging must comply with DLA Packaging Requirements, including sealed unit containers for protection, commercial shipping containers for safe transport at the lowest rate, and precise labeling per Medical Marking Standard No. 1, superseding MIL-STD-129. The kits are regulated by the FDA and require confirmation through EBS referral. Shipments are destined for two locations: USS Delaware (SSN 791) in FPO AE and Fort Bliss, TX, with delivery required within five days and no quantity variance allowed. Delivery is FOB destination, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 only where not overridden by higher-priority DLA technical requirements, and palletization must follow RP001. Freight must be shipped by traceable means, prohibiting parcel post, and markings must include NSN, manufacturer and CAGE codes, manufacture and expiration dates, contract number, and lot number. The contract covers two CLINs, both at $1.00 per unit, with a required delivery date of July 30, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

SEXTANT, MARINE

Solicitation # SPE4A5-26-T-312S

The contract pertains to the procurement of 57 marine sextants, identified by part number A-A-59005 and NSN 6605-01-253-3442, classified as a commercial item with specified deviations from the standard Federal Commercial Item Description. The sextants must be furnished without batteries or spares to prevent degradation during storage, and certain specifications such as horizon bubble requirements and accuracy tolerances are modified per exceptions outlined in the contract. The item is designated as a critical application item and must comply with Technical Data Package Revision B Generation 2 under QAP-13873. All units are subject to zero-defect acceptance under MIL-STD-1916 or comparable zero-based sampling plans, with unspecified attributes treated as major and inspection performed at origin. Mercury and mercury-containing compounds are strictly prohibited in manufacturing, packaging, or handling except in limited functional applications explicitly exempted by NAVSEA, and any such devices must include secondary containment. Packaging must conform to MIL-STD-2073-1E and MIL-PRF-23199, with labeling and barcoding per MIL-STD-129, and no special marking is required. The delivery is FOB origin within 164 days, with a required ship date of January 18, 2027, and a final delivery deadline of September 3, 2027. The item is non-hazardous per HMIC review, no shelf life applies, and no unit identification is mandated. All quality, inspection, and packaging requirements are governed by DLA’s master list of technical and quality requirements referenced in the contract, and the sole point of delivery is the DLA Distribution facility in New Cumberland, Pennsylvania.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

COMMUNICATION SYSTE

Solicitation # SPE4A7-26-T-599T

The contract pertains to a communication system item with NSN 5895-01-601-2576, requiring one unit for delivery within five days of award. It is governed by DLA’s technical and quality requirements referenced from the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, assigning verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 to critical, major, and minor attributes respectively. The item contains technical data subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, even within the U.S. Only contractors with approved JCP certification, completed DOD export training, and authorized access by DLA may handle this data, with DFARS 252.225-7048 fully applicable. Covered defense information is also subject to strict access controls. The solicitation, issued under number SPE4A7-26-T-599T, has a response deadline of August 6, 2026, and is classified under NAICS 334511 with performance location in Norfolk, Virginia. Primary point of contact is Soni Randolph at DLA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Gold Tube Testing – High-Frequency Amplifier TestingThe contract requires monthly performance testing and calibration of two Cross-Field Amplifier units using certified master test kits, with all test data accurately documented and reported to ensure operational reliability and compliance with technical specifications. The work involves precise instrumentation and procedural adherence to maintain the high-frequency amplification capabilities of the CFAs, critical for defense-related systems under the purview of the Department of Defense. Performance must be consistently verified and recorded to support ongoing mission readiness and equipment maintenance standards. The contract is issued under the NAICS code 334511 for Electronic Computer Manufacturing and is administered by NSWC Crane, located in Crane, Indiana, with a response deadline of August 5, 2026. It is categorized as a subcontract and forms part of the broader defense acquisition framework, though no set-aside provisions are specified. The scope demands technical expertise in high-frequency electronic systems, rigorous documentation practices, and timely data submission to support sustained operational performance of critical components in national defense infrastructure.

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

INSERT, SCREW THREAD

Solicitation # SPE4A1-26-T-2497

The contract pertains to the procurement of 198 units of a screw thread insert identified by NSN 5325-00-786-6185 under solicitation SPE4A1-26-T-2497, with a delivery requirement of 80 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in their revision state as of the solicitation issue or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are categorized as critical, major, or minor and assigned verification levels or AQLs accordingly. Configuration changes require formal engineering change proposals, and requests for deviations or waivers must be submitted. Documentation for source approval is mandated under RC001, and export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unlicensed export or disclosure to foreign persons, including foreign nationals within the U.S. Only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access via the DLA questionnaire are permitted to handle such data under DFARS 252.225-7048. Physical identification and removal of government markings from non-accepted items are required per RQ011 and RQ017. The contract is administered by the Aviation Supply Chain under the Department of Defense with performance to occur at Robins AFB, Georgia, and inquiries are directed to Jade Stringfield at the provided contact information.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2496

The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Quality Inspection and Acceptance TestingThe contract requires the performance of final inspection and acceptance testing at Fort Wainwright, Alaska, to verify that all delivered items meet prescribed quality standards. Inspection and testing must be conducted in accordance with either MIL-STD-1916 or ASQ H1331 sampling plans, ensuring statistical rigor and compliance with military specifications. The work is scoped to occur at the destination point, and successful completion hinges on demonstrating conformance through documented results using these accepted methodologies. This is a subcontract under the NAICS code 541330, issued by the Aviation Supply Chain within the Department of Defense, with a response deadline of August 5, 2026. The place of performance is specifically identified as Fort Wainwright with ZIP code 99703-7000, indicating that all activities must be executed on-site at this military installation. Bidders must be prepared to travel or operate at this location to fulfill inspection obligations, and failure to adhere to the specified sampling standards will result in non-acceptance of the delivered goods.

Engineering Services

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of preservation, packaging, palletization, and marking services for circuit card assemblies in strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness and traceability. All work must meet rigorous defense logistics requirements for protection, labeling, and handling of sensitive electronic components intended for operational deployment. The services are to be performed at Fort Wainwright, Alaska, with a delivery deadline of August 5, 2026, and are solicited as a subcontract under NAICS code 493190 for warehousing and storage. The contract is managed by the Aviation Supply Chain within the Department of Defense and is available for bidding via the DIBBS platform.

Other Warehousing and Storage

POSTED

DEADLINE

Circuit Card Assembly ManufacturingThe contract seeks the manufacture and delivery of four high-reliability circuit card assemblies meeting stringent military and Defense Logistics Agency standards, encompassing full lifecycle responsibilities from component sourcing and procurement through assembly, functional testing, and final packaging. All work must adhere to specified technical and quality controls to ensure mission-critical performance, with delivery required at Fort Wainwright, Alaska, under a subcontract arrangement within the Department of Defense’s Aviation Supply Chain framework. The NAICS code 334418 indicates classification under Electronic Component and Product Manufacturing, underscoring the specialized nature of the technical requirements. Responses are due by August 5, 2026, with the solicitation posted on July 28, 2026, providing a seven-day window for qualified vendors to submit proposals. The contract is not subject to a specific set-aside designation, meaning all eligible contractors may respond, and the place of performance is fixed at the specified Alaska location. Compliance with military-grade specifications for durability, environmental resilience, and traceability is non-negotiable, and successful bidders must demonstrate experience with defense-level electronics manufacturing, rigorous inspection protocols, and the ability to meet exacting documentation and reporting standards required by the Defense Logistics Agency.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

PUMP, FUEL, ELECTRICA

Solicitation # SPE4A1-26-T-2469

The contract pertains to the procurement of four electrical fuel pumps with NSN 2910-01-732-6937 under solicitation SPE4A1-26-T-2469, issued by the Defense Logistics Agency’s Aviation Supply Chain. Deliveries are required within 20 days after award, with FOB Origin pricing terms and delivery to Assault Craft Unit 4 at Building 3821, 2155 11th Street, Virginia Beach, VA 23459-3018. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of specific preservation methods, container types, and packaging codes, while explicitly excluding Item Unique Identification per DFARS 252.211-7003(c)(1)(i). All shipments must be transported via traceable means, prohibiting parcel post, and palletization must adhere to DLA’s RP001 requirements. The contract includes robust cybersecurity and information safeguards requiring compliance with CMMC Level 2 self-assessment, NIST SP 800-171, and DFARS 252.204-7012 for safeguarding covered defense information, with mandatory cyber incident reporting. Mercury or mercury-containing compounds are prohibited from direct contact with delivered hardware except for specific functional applications such as batteries, fluorescent lamps, sensors, and weapons systems, with such exempt items requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at destination under zero-defect sampling standards per MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable procurement, hazardous material safety, subcontracting, contract changes, and payment terms, including accelerated payments to small business subcontractors. The total contract value appears to be $4.00 based on available line item data, though this is likely incomplete or misformatted, as the unit price is not specified. The solicitation requires electronic submission via DIBBS by July

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE4A1-26-T-2495

This contract pertains to the procurement of four circuit card assemblies identified by NSN 5998-00-881-0949 and part number 7104170-00 under solicitation SPE4A1-26-T-2495, with delivery required within 20 days to Fort Wainwright, Alaska. The items must conform to stringent technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stipulated, and quality verification levels are assigned based on attribute criticality. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The contractor must adhere to CMMC Level 2 self-assessment requirements and ensure materials meet equivalence standards for legacy specifications like MIL-S-13949, which was canceled but still guides material selection. All assemblies are to be delivered FOB origin with no variance allowed in quantity, and acceptance occurs at the destination. The point of contact for questions is Allison Hugel of the DLA, and the contract requires adherence to DLA packaging, transportation, and supply chain protocols specified in associated procedural notes.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling (If Applicable)

Environmental Consulting Services

POSTED

DEADLINE

Quality Inspection and AQL Sampling Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Domestic Freight and FOB Origin Transportation

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Labeling Services

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

INDICATOR SUBASSEMB

Solicitation # SPE4A1-26-T-2493

The contract specifies the procurement of an Indicator Subassembly, Position, Flight Instrument, with part number 133047 and NSN 6610016689621, for a quantity of 38 units at a unit price of $38.00, totaling $1,444.00. Delivery is required within five days of award, with shipment destined for Tobyhanna Army Depot, Pennsylvania, under FOB Origin terms. All items must be packaged per ASTM D3951 and labeled strictly in accordance with MIL-STD-129, with palletization meeting DLA Packaging Requirements, and the DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise directed. The supplier must comply with CMMC Level 2 self-assessment, remove government identification from rejected items, and physically mark bare items as required. Shipment must be sent via the fastest traceable method, excluding parcel post, with all markings and references including the RDD 777, Project TP 1, and supplier identifier W25G1V. The solicitation is a total small business set-aside under NAICS 334511, issued by the Department of Defense’s Aviation Supply Chain, with a response deadline of August 4, 2026, and a posted date of July 27, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE