This Government Contract opportunity from Department Of Defense was posted on September 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacturing of Sleeve Bushings (NSN 3120-01-445-4645)

Closed

Federal

Submission Closed09/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332111

New

DIBBS

Aerospace Grade Alloy Supply for GearshaftsThis subcontract involves the supply of raw, certified aerospace-grade metal alloys intended for prime contractors fulfilling DLA supply contracts for TF-33 engine components. The scope of work specifically requires the delivery of certified raw material blanks or bars for 14 gearshafts, ensuring all materials strictly adhere to the chemical and physical properties outlined in Drawing NR 77445 410906. Managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, the contract mandates full material traceability and mill certifications to maintain compliance with DFARS specialty metals requirements. Performance for this effort is centered at Tinker AFB, with the procurement falling under NAICS code 332111.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Valve Assembly (NSN 4820-01-465-8386)This subcontract involves the procurement of 56 Valve Assembly units, identified by NSN 4820-01-465-8386, to support prime contractors on DLA Weapons Support Maritime Hardware/Electrical projects. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to NSN technical specifications and the DLA Master List of Technical and Quality Requirements RA001. Additionally, all items must be packaged according to DLA Packaging Requirements RP001 before being delivered to the designated DLA location. Managed by the Department of Defense through DLA DIST SAN JOAQUIN, the contract falls under NAICS code 332111. The place of performance is located in Tracy, California. Interested parties must note the response deadline of November 9, 2026, to ensure all submission requirements are met for this supply effort.

POSTED

DEADLINE

Specialized Metal Casting and Forging for Valve ComponentsThis subcontract, managed by the Defense Logistics Agency for the Department of Defense, involves the specialized casting and forging of raw metal components used in valve procurements. The contractor is responsible for producing metal blanks to specific dimensions and material grades required for NSN 4820014773179, utilizing industrial furnaces and forging presses. Key deliverables include the finished cast and forged valve blanks, accompanied by necessary mill test reports and verification of mercury-free compliance. The project falls under NAICS code 332111 and is scheduled for performance at FPO 09579. Interested parties must adhere to the timeline established by the posting date of October 29, 2026, with a response deadline set for November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0106

Solicitation SPE8E4-27-T-0106 is a request for quotes from DLA Distribution Depot Oklahoma for the procurement of 248 feet of Steel Comp 416 metal bar. The material must be hot rolled, round, annealed, and 0.750 inches in diameter, supplied in whole feet lengths between 10 and 12 feet. A quantity variance of plus or minus 10 percent is permitted. Delivery is required by March 1, 2027, with a need ship date of March 28, 2027, shipped FOB Origin to DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and identification standards, including the submission of a Certificate of Quality Compliance with every shipment. Continuous identification markings, including the DLA contract delivery order number, NSN, and manufacturer details, are required on each unit of issue; failure to comply with these marking requirements may result in product rejection. Packaging and palletization must adhere to RP001 and MIL-STD-2073-1E, while shipment markings must follow MIL-STD-129. The procurement incorporates various federal regulations, including the Buy American Act and the Berry Amendment. Price evaluation preferences are available for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Inspection and acceptance will occur at the destination.

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1407

Solicitation SPE7M4-27-T-1407, issued by the DLA Weapons Support Fluid Handling Division, seeks quotations for 27 units of Flush Locks, identified by NSN 5340-01-444-8400 and part number S2X-6113H. The procurement falls under NAICS 332111. Delivery is required within 256 days, with a need ship date of July 13, 2027, and a final required delivery date of July 18, 2027. Shipping is FOB Origin, with the destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically prohibiting the use of mercury or mercury compounds in any packaging or preservation materials. All payment requests and receiving reports must be processed electronically via the Wide Area Workflow system. Compliance with various FAR and DFARS clauses is required, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity standards, and prohibitions against the use of additive manufacturing unless specifically authorized by the contracting officer. All quotes must be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7661

Solicitation SPE4A6-27-T-7661 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 23 sleeve bushings, identified by NSN 3120-01-206-4081. The requirement is set for delivery within 150 days after order, with a required delivery date of July 4, 2027, shipped FOB Origin to DLA Distribution Red River in Texarkana, Texas. The procurement is subject to destination inspection and acceptance, though some technical requirements mention origin inspection. This contract is heavily regulated by export controls, requiring offerors to have an approved US/Canada Joint Certification Program certification and DLA authority approval to access technical data subject to ITAR or EAR regulations. Compliance with the Buy American Act, Berry Amendment, and various DLA master list quality requirements, such as MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, is mandatory. Payment must be processed electronically through the Wide Area WorkFlow system. Evaluation preferences are provided for HUBZone Small Business Concerns, and the buy may be eligible for automated award.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0116

Solicitation SPE8E4-27-T-0116 is a total small business set-aside fixed-price contract issued by DLA Troop Support for the procurement of 58 feet of cold drawn flat metal bar. The material must be Steel Comp 1018 with dimensions of 0.500 inches thick and 2.000 inches wide, supplied in whole foot lengths between 10 and 14 feet. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of December 29, 2026, and a need ship date of March 28, 2027. The contract allows for a quantity variance of plus or minus 10 percent. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Technical and quality compliance is governed by the DLA Master List, ASTM A108, and ASTM A29/A29M-20, among other standards. Key deliverables include a Certificate of Quality Compliance (Mill-Material Certification) and Metal Certification Contract Data Requirements Lists (CDRLs). Strict marking and packaging requirements apply per MIL-STD-129 and ASTM A700, requiring specific identification such as the contract delivery order number, NSN, and heat and lot number using waterproof stamping or stenciling. Inspection and acceptance will occur at the destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Casting and Forging for Drag Brace NutThis subcontract involves the production and supply of 44 certified raw forged or cast blanks for Drag Brace Nuts, supporting prime contractors on projects for the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the use of aerospace-grade alloys to perform near-net shape casting or forging specifically for part number 204-011-144-003. The selected provider must ensure strict adherence to quality standards by providing comprehensive material certification, full traceability, and Source Approval Request documentation. Performance for this Department of Defense contract will take place in New Cumberland, Pennsylvania, under NAICS code 332111.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0282

Solicitation SPE8EE-27-T-0282 is a request for quotation issued by DLA Troop Support, Construction & Equipment Manu & Con for the procurement of one hoisting adapter, identified by NSN 3940-01-122-8976. The contract is categorized under NAICS code 332111 and utilizes First Destination Transportation to optimize shipping costs. The required delivery date is July 20, 2027, with a need ship date of April 26, 2027, and a delivery period of 167 days after the order is placed. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Red River in Texarkana, Texas. The procurement incorporates stringent quality and technical standards, including the DLA Master List of Technical and Quality Requirements and ISO 9001:2015 compliance for manufacturers. Specific packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Cybersecurity compliance is mandated via CMMC Level 2 Self-Assessment and the application of covered defense information protocols. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the solicitation applies the Buy American Act and Berry Amendment for domestic sourcing and allows for a HUBZone price evaluation preference.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0173

Solicitation SPE8E4-27-T-0173 is a request for quotations for the procurement of 40 composite armor panels, identified by NSN 9535015692367. The contract is issued by DLA Troop Support, Construction and Equipment (Metals), with delivery required within 190 days of award. The need ship date is May 19, 2027, with an original required delivery date of May 31, 2027. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination. Strict packaging and marking requirements are mandated, requiring each armor panel to be individually packaged in a wooden box with sufficient cushioning and dunnage material to prevent movement, adhering to MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with DLA requirement RP001. The contractor must utilize the Wide Area WorkFlow system for electronic invoicing and payment. Compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information under DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment for domestic material restrictions.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract for Aerospace-Grade Raw Material Supply involves providing raw metal stock, forgings, or castings to prime contractors for the production of Valve Bodies under Department of Defense DLA supply contracts. The performance of this contract takes place in Cherry Point, and all supplied materials must strictly adhere to the Buy American Act and the Berry Amendment. A critical requirement of the agreement is the provision of full traceability for all raw materials. This includes the mandatory submission of Material Test Reports and Certificates of Conformance, particularly for items designated as Critical Safety Items. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

2 days ago

DEADLINE

in 11 days

AI Contract Overview

This subcontract with the Department of Defense ASC Commodities Division involves the precision manufacturing of 22,000 sleeve bushings, specifically part number NAS72-7-009, for prime contractors supporting DLA supply contracts. The work requires the use of precision turning and milling equipment to adhere to source-controlled technical data and strict NAS tolerances. Performance will take place in Tracy, California, under NAICS code 332111. The contractor must comply with RD003 CDI requirements and maintain access to limited rights data to ensure technical specifications are met. Final deliverables must be packaged according to ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on September 9, 2026, with a response deadline of September 17, 2026.

General Info

DoD subcontract for manufacturing 22,000 precision sleeve bushings in Tracy, California.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332111 - Iron and Steel Forging

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-27UQ.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 9

subcontract

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies sleeve bushings for prime contractors delivering DLA supply contracts. Precision machines 22,000 units of Part Number NAS72-7-009 according to source-controlled technical data and limited rights specifications. Uses precision turning and milling equipment to meet NAS tolerances. Requires access to limited rights data and compliance with RD003 CDI requirements. Delivers 22,000 EA bushings packaged per ASTM D3951 and MIL-STD-129.