Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of Special Shaped Section Nonmetallic Seals

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing of nonmetallic special shaped section seals for prime contractors supporting DLA Weapons Support ASC aviation projects. The scope of work requires the fabrication of components according to Boeing part number 659T1182-53 and NSN 5330016493302, utilizing either precision molding or machining processes. Performance will take place at Tinker AFB. To qualify, the provider must maintain ISO 9001:2015 compliance and hold FAA Airworthiness Approval. The contract mandates strict adherence to the Buy American Act and the Berry Amendment. Final deliverables must include the finished seals accompanied by safety data sheets and comprehensive supply chain traceability documentation.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2144.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, NONMETALLIC SPECI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 1

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies nonmetallic special shaped section seals for prime contractors on DLA Weapons Support ASC aviation projects. Fabricates components to Boeing part number 659T1182-53 and NSN 5330016493302 using precision molding or machining. Requires ISO 9001:2015 compliance, FAA Airworthiness Approval, and adherence to Buy American Act and Berry Amendment. Delivers finished seals with SDS and supply chain traceability documentation.

Similar Contracts

Same NAICS industry code

V-Belt Manufacturer (Critical Application)This subcontract involves the manufacture or sourcing of eight V-belts for prime contractors supporting DLA supply contracts. The belts must strictly conform to Basic Drawing NR 80064 2587911 Revision E and Gates Corporation part number 3/3V530. Compliance with NAVSEA 5100-003D mercury restrictions and MIL-STD-130N marking is mandatory, and the supplier must adhere to the Buy American Act and DFARS cybersecurity standards. The finished products must be packaged according to RP001 and MIL-STD-129 for delivery to DLA Distribution San Joaquin in Tracy. This requirement is managed under NAICS code 326220 for the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Engines. Responses are due by November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN 4720-01-563-3625)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Supplier (NSN 4720-01-649-5499)This subcontract involves the supply of specialized nonmetallic hose, identified by NSN 4720-01-649-5499, for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The requirement is for three feet of hose that strictly adheres to the DLA Master List of Technical and Quality Requirements and is manufactured without the use of class I ozone-depleting chemicals. The contract mandates strict adherence to military standards for logistics, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Performance will take place in Barstow, California, under NAICS code 326220. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

Non-Metallic Hose/Tubing Material SupplyThis subcontract, titled Non-Metallic Hose/Tubing Material Supply, involves the provision of raw non-metallic tubing and specialized hose material for prime contractors fulfilling DLA supply contracts. The supplier is responsible for sourcing raw stock that meets the technical specifications for NSN 4720015955505 and delivering the material directly to the manufacturer. To ensure compliance with DLA standards, the provider must supply material certifications and Mill Test Reports verifying the chemical and physical properties of the stock. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Engines, the contract requires strict adherence to the Buy American Act and the provision of MSDS documentation. The performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 326220. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the fabrication of nonmetallic hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The manufacturer is responsible for producing NSN 4720015976751 in strict accordance with DLA technical data, with a specific prohibition against the use of mercury or mercury-containing compounds. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326220. To ensure quality and compliance, the contractor must maintain either SAE AS9003 or ISO 9001 quality systems. All completed and inspected hose assemblies must be packaged and marked according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Nonmetallic Tubing (NSN 4720-01-737-9985)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Nonmetallic Hose Assemblies (NSN 4720-01-733-9638)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

O-Ring Supplier (NSN 5331-01-172-1879)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Preformed Packing Manufacturer (NSN 5330-01-060-3404)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Supply of Nonmetallic Round Section Seal (NSN 5330014857208)This subcontract involves the manufacture or procurement of one nonmetallic round section seal, identified by NSN 5330014857208, for the Department of Defense via the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The contractor must ensure the seal adheres to the DLA Master List requirements and is strictly asbestos-free in accordance with FED-STD-313. The final product must be packaged in waterproof, greaseproof, and opaque bags following MIL-DTL-117, Type II, Class C, Style 1 and MIL-STD-129 standards. Delivery of the packaged seal is required at the USS John Canley ESB 6 in San Diego, California. The response deadline for this opportunity is November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Nozzle Segment Seals (NSN 5330-01-281-3588)This subcontract involves the manufacture of 600 nozzle segment seals under NSN 5330-01-281-3588 for prime contractors supporting the DLA Weapons Support Land Supplier Opns Vehicle Spt. The project requires the fabrication of these seals without the use of additive manufacturing, with performance taking place in Corpus Christi, Texas. The contractor must maintain strict adherence to the Buy American Act and DFARS 252.225-7048 regulations. Additionally, the provider is required to hold US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR export control regulations.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Tubing Manufacturing and SupplyThis subcontract involves the manufacture and supply of 16 units of nonmetallic tubing for prime contractors working on DLA Weapons Support Fluid Handling projects. The tubing must be produced or sourced according to Part Number R0118885 specifications for Critical Application Items. Strict adherence to the Buy American Act is required, and the use of additive manufacturing is explicitly prohibited. Logistical requirements include packaging items in accordance with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. The contract is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Wire Rope Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or procurement of one single-leg wire rope assembly identified by part number 7018946243. The supplier is responsible for ensuring the assembly is delivered to prime contractors on DLA supply contracts in full compliance with specific military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 DLA Packaging Requirements for palletization. The opportunity falls under NAICS code 332991 and was posted on November 1, 2026, with a response deadline of November 9, 2026. The primary objective is the delivery of a single, completed wire rope assembly that is fully packaged and marked for military shipment.

Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Mounting Bracket (Honeywell P/N 974197-1)This subcontract involves the supply of precision mounting brackets for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing brackets that adhere to NSN 5340013600661 and Honeywell Part Number 974197-1. All materials provided under this agreement must comply with the Buy American Act to ensure regulatory adherence. Logistical requirements specify that packaging must follow ASTM D3951 or TQ IP025 standards, with labeling and palletization meeting MIL-STD-129 and RP001 specifications, respectively. The scope of work requires the delivery of one mounting bracket FOB Origin to Fort Hood, Texas. This procurement is managed by the Department of Defense under NAICS code 336419.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Differential Dial Indicating GageThis subcontract involves the procurement or manufacture of one Differential Dial Indicating Gage for the Defense Logistics Agency, specifically under the DLA Weapons Support ASC Supplier OEM Division. The item must strictly adhere to NSN 6685-01-082-6795 specifications and be packaged and labeled according to MIL-STD-2073-1E and RP001 DLA Packaging Requirements. Performance for this contract is located in Silverdale, Washington. Eligible prime contractors must possess a valid UEI and CAGE code to participate. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 333314 and requires the delivery of a single, fully compliant packaged gage.

Optical Instrument and Lens Manufacturing

POSTED

about 1 hour ago

DEADLINE

Wire Rope Assembly Supplier (NSN 4010-01-689-5572)

Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Thermocouple Heating Elements (NSN 6685-01-614-9819)

Carbon and Graphite Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Aircraft Structural Components (NSN 1560009324298)This subcontract involves the manufacture or procurement of four structural aircraft components, identified by NSN 1560009324298, for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the contractor to provide Source Approval Request documentation in accordance with RC001 and ensure physical part identification follows RQ017 standards. All deliverables must be packaged and marked according to DLA RP001 standards and delivered to New Cumberland. The project falls under NAICS code 336413, with a response deadline set for November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supplier of Spool, Sleeve Assembly (NSN 4810015455105)

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Electrostatic Discharge (ESD) Packaging and ShippingThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires specialized packaging and secure transport services for prime contractors. The scope of work focuses on the handling of sensitive electronics, necessitating strict adherence to MIL-STD-2073-1E and MIL-PRF-81705 standards to prevent electrostatic discharge and electromagnetic interference. Additionally, all shipments must be marked according to MIL-STD-129 and managed under FOB Origin terms for delivery to US freight forwarders destined for the Czech Republic. Compliance with ITAR and EAR export control regulations is mandatory for the execution of this contract. The selected provider is responsible for ensuring that all components are securely packaged and delivered to the designated forwarder. This opportunity falls under NAICS code 488210 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

Support Activities for Rail Transportation

POSTED

about 1 hour ago

DEADLINE

Electronics Testing and Inspection ServicesThis subcontract for Electronics Testing and Inspection Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent verification and testing, specifically executing sampling plans according to MIL-STD-1916 or ASQ H1331 and ensuring lead finish compliance per IPC/JEDEC J-STD-609. All work must be conducted using calibrated Measuring and Test Equipment in accordance with requirement RT001, with final deliverables consisting of detailed inspection reports and certifications of conformance. To be eligible for this engagement, the contractor must hold ISO 9001:2015 and JCP certifications to ensure proper technical data access. The opportunity falls under NAICS code 541380 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

Diode Assembly Fabrication (P/N 30-251-48AA)This subcontract involves the fabrication of 15 high-reliability diode assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The manufacturer must produce semiconductor assemblies according to Bell Textron part number 30-251-48AA specifications, ensuring lead finish markings comply with IPC/JEDEC J-STD-609 and adhering to zero-non-conformance sampling plans under MIL-STD-1916 or ASQ H1331. To qualify for this project, the contractor must maintain cleanroom facilities, hold JCP certification, and meet CMMC Level 2 security standards. The opportunity is categorized under NAICS code 334413 and was posted by the DLA Weapons Support ASC Supplier OEM Division with a response deadline of November 9, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Poppet and Seat Assembly SupplierThis subcontract involves the supply of one Poppet and Seat Assembly for prime contractors under DLA supply contracts. The selected supplier is responsible for manufacturing or sourcing the assembly in accordance with NSN 4820-01-171-2520, with additive manufacturing permitted provided there is ESA approval. All items must be packaged according to ASTM D3951 and RP001 standards, and any hazardous materials must be labeled per 29 CFR 1910.1200. The opportunity is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 9, 2026. The contract falls under NAICS code 332991 and requires the delivery of a single, fully packaged and labeled assembly.

Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Freight ForwardingThis subcontract, titled MIL-SPEC Packaging and Freight Forwarding, involves providing specialized military packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts for the Government of Israel. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, ensuring all shipments are fully prepared for international transit. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, the contract requires the coordination of FOB Origin delivery to a designated freight forwarder located in Jersey City, New Jersey. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 9, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS