Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacturing of XA-3 Vertical Star Pack Shipping Boxes

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacturing of 576 units of 10x10x12 inch weather-resistant corrugated fiberboard boxes configured in a vertical star pack design, intended for robust shipping and storage under demanding environmental conditions. These boxes are to meet specific durability standards to ensure protection against moisture, impact, and other external stressors during transport. All units must adhere to the technical specifications for assembly and structural integrity required by the vertical star pack configuration, which emphasizes efficient stacking and unitized handling in high-volume logistics environments. The contract is classified as a subcontract under the NAICS code 322211, which corresponds to corrugated and solid fiber box manufacturing, and is issued by the Defense Logistics Agency within the Department of Defense. Although the solicitation number and point of contact are not provided, the contract was posted on July 15, 2026, and is accessible via the DIBBS portal. Performance location and agency address details are unspecified, indicating the production may occur at any qualified facility meeting the required standards, with delivery expected to support military or federal supply chain needs.

General Info

576 weather-resistant corrugated boxes in vertical star pack design for military logistics.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

322211 - Corrugated and Solid Fiber Box ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of 576 units of 10x10x12 inch weather-resistant corrugated fiberboard boxes in a vertical star pack configuration.

Similar Contracts

Same NAICS industry code

2026 Augusta Nursery Direct Printed BoxesThe Virginia Department of Forestry is soliciting bids for the furnishing and delivery of printed shipping boxes to be used at the Augusta Nursery located at 90 Forestry Center Lane in Crimora, Virginia. The boxes must be direct printed in black ink using printing plates supplied by the Department, ensuring consistent branding and identification. All deliveries must meet the specified requirements and be completed according to the Department’s operational needs. The solicitation, identified as QQ-124693, was posted on July 20, 2026, with responses due by July 27, 2026, at 5:00 PM. This opportunity is open to vendors under a State and Local Government (SLED) procurement, with no specific set-aside designated. inquiries may be directed to Brian Fox, the point of contact, via email at brian.fox@dof.virginia.gov or by phone at 434-995-0394. All interested parties are expected to review the full solicitation details through the provided online portal.

Department of Forestry

POSTED

about 17 hours ago

DEADLINE

Manufacture of 4GV/X21/S UN-Rated BoxesThe contract calls for the manufacture of 1,260 plastic boxes adhering to the 4GV/X21/S specification, designed for the safe transport of hazardous materials in compliance with UN performance standards and ASTM D3951 packaging requirements. These containers must meet rigorous safety and durability benchmarks to ensure secure handling and transit of dangerous goods under various environmental and mechanical stresses. The production is being carried out under a subcontract arrangement through the Defense Logistics Agency, a component of the Department of Defense, indicating the critical role these boxes play in military or defense-related logistics. The work falls under NAICS code 322211, which corresponds to plastic box and container manufacturing, and the contract was posted on July 20, 2026. While specific delivery locations and point of contact details are not provided, the equipment will be used in contexts requiring certified hazardous material packaging, likely supporting defense operations or supply chains. The absence of set-aside designations suggests the subcontract is open to eligible contractors without restrictions based on business size or socioeconomic categories, and performance is expected to align with federal defense logistics standards without geographic limitations beyond the operational needs of the agency.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

GEL, ANTIMICROBIALThe contract is for the procurement of 8 packages of antimicrobial gel, each containing six 8 oz tubes of an amorphous gel containing ionic silver for broad-spectrum antimicrobial action, identified by NSN 6510-01-588-1750. The gel must have a non-extendable shelf life of 48 months, with no more than seven months elapsed from the manufacturer’s date to the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract number and lot number, in full compliance with the latest revision of Medical Marking Standard No. 1A, which supersedes MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E at packing level B and meet DLA Packaging Requirements for Procurement RP001, ensuring commercial-grade sealed unit containers and shipping packaging suitable for safe transit at the lowest carrier rate. The product is classified under NAICS code 322211 and is subject to the Buy American Act and the Berry Amendment, with the Berry threshold reduced to $150,000. Hazardous material handling and labeling must comply with IP025 and FAR 52.223-3, and the item is subject to covered defense information requirements under RD003. All deliveries are due within 20 days of award at FOB destination to FPO, zip 09566-4008. The winning contractor must submit payment requests and receiving reports exclusively through the Wide Area Workflow (WAWF) system in accordance with DFARS 252.232-7003 and 252.232-7006, and must maintain active certification in the System for Award Management (SAM) with accurate representations regarding small business status, socioeconomic programs, and compliance with restrictions on covered defense telecommunications equipment. Contractor information systems must comply with NIST SP 800-171 and the basic safeguarding requirements outlined in FAR 52.240-93 and DFARS 252.240-7997. The contract incorporates clauses for combating trafficking in persons, employment eligibility verification, equal opportunity for workers with disabilities, sustainable procurement, transportation by sea, and prohibitions on hexavalent chromium and procurement from communist Chinese military companies. Technical and quality specifications

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

APPLICATOR, COMPOUND BE

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of Dermabond Advanced 12S surgical skin adhesive, a 2-octyl cyanoacrylate product supplied in 0.7 mL applicator pens, with a unit of issue of one box containing twelve units. The product must have a strict 24-month shelf life with no extensions permitted, and no more than three months may have passed between the manufacturer’s date and the delivery date to the government. Labeling requirements mandate clear imprinting of the manufacturer date, expiration date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must consist of sealed unit containers that protect contents from damage, shipped in commercial exterior containers suitable for safe delivery at the lowest freight rate to the specified delivery point in Groton, Connecticut. All items must be marked according to MMS No. 1, and government identification must be removed from non-accepted supplies. The NSN is 6510-01-614-0050, with a single box required under purchase request 7017530521, and delivery is due within five days of award. The solicitation number is SPE2DS-26-T-248J, issued by the Department of Defense’s Medical Supply Chain, with technical and quality requirements governed by the DLA Master List, and bids must include the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

APPLICATOR, COMPOUND BEThe product is an applicator impregnated with compound benzoin tincture, intended for external use as an adhesive adjunct to enhance the bond of surgical tape and other wound closure adhesives. Each unit is a 0.66 cc sterile vial, packaged in groups of 160, with a total contract quantity of two packs. The item has a shelf life of 60 months, with no extensions permitted, and no more than nine months may have passed from the manufacturer’s date to the date of delivery to the government. Labels must clearly show the manufacturer’s date, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of MMS1A. The product is flammable and must be stored below 40 degrees Celsius (104 degrees Fahrenheit), avoiding excessive heat and humidity. Technical and quality requirements are governed by the DLA Master List, with specific references to RS023 for shelf-life, RD003 for covered defense information, RP001 for packaging, and RQ011 for removal of government identification from non-accepted supplies. The NSN is 6510-01-594-5708, the contract solicitation number is SPE2DS-26-T-247E, with a response deadline of July 27, 2026, and delivery required within 20 days of award to Fort Stewart, Georgia. Bidders must specify the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

HHS0017406v2 Insulated shippers and cold packsThe Texas Department of State Health Services is seeking qualified vendors to supply insulated shippers and cold packs under solicitation HHS0017406v2, issued on July 17, 2026, with proposals due by August 5, 2026, at 4:30 PM Central Time. The requirement is for specialized packaging solutions designed to maintain temperature-sensitive materials during transport, supporting the operational needs of the state laboratory system. The contract is open to all eligible suppliers without a specific small business set-aside, and performance will take place within Texas, with delivery expected to meet the agency’s handling and storage standards for biological and medical samples. Point of contact for all inquiries is Courtney Meads, reachable via phone at 512-406-2478 or email at Courtney.Meads@hhs.texas.gov. The solicitation is posted on the Texas SmartBuy portal, and vendors must submit responses through the designated platform. While NAICS code and detailed set-aside information are not provided, the focus is strictly on procuring reliable, compliant insulated shipping systems and corresponding cold packs that ensure sample integrity during transit across the state’s healthcare and diagnostic networks.

Department of State Health Services

POSTED

DEADLINE

Fiberboard Box and Packaging SupplyThe contract entails the supply of fiberboard boxes specifically designed as Style RSC-L, Type CF, Class Domestic, Grade 275, intended for the packaging of military T-shirts. These boxes must fully comply with industry and military standards including ASTM-D1974 for fiberboard construction, MIL-STD-147E for packaging requirements, and MIL-HDBK-774 for packaging design and application. The boxes are to meet rigorous durability, structural integrity, and environmental resilience criteria necessary for military logistics and field deployment conditions. All materials and manufacturing processes must align with the specified grade and type to ensure uniformity, protection of contents, and compatibility with existing military supply and storage systems. This is a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 322211 indicating the primary business activity as pulp, paper, and paperboard mills. The contract was posted on July 17, 2026, and the place of performance and delivery details are not specified, suggesting the work may be distributed or coordinated across multiple locations under the DoD supply chain. The associated contract identifiers suggest this award is tied to a larger procurement effort with existing contract numbers, likely supporting ongoing military apparel distribution needs. All deliverables must adhere strictly to the technical and regulatory requirements outlined, with no flexibility in box design, material grade, or compliance benchmarks.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Copying Paper – Stabilization Process GradeThe contract is for the procurement and delivery of 120 units of specialized copying paper conforming to military specification NSN 6750014431166, specifically designated for stabilization processes. This is a subcontract issued under the Defense Logistics Agency within the Department of Defense, with the NAICS code 322211 indicating the paper manufacturing industry. The solicitation was posted on July 16, 2026, though no solicitation number is provided. The place of performance and office address details are unspecified, and no point of contact information is listed. The contract is accessible via a DIBBS link, and while the awarded quantity is noted as 12549 in the link parameters, the contracted quantity remains 120 units. All delivery and compliance requirements must align strictly with the military standard for stabilization-grade paper.

Defense Logistics Agency

POSTED

DEADLINE

DRESSING, OCCLUSIVE,The contract is for the procurement of occlusive chest wound seal dressings, designated by NSN 6510-01-581-0553, with a unit of issue of PACKAGE/2EACH. Each dressing is adhesive on one side, translucent, latex-free, and features a hydrophilic gel adhesive with a resealable protective package for a backup seal. No venting is included. The product must have a shelf life of 36 months, non-extendable, with no more than five months elapsed between the manufacturer’s date and the delivery date to the government. Packaging and marking must comply with MIL-STD-129, including barcoding, and adhere to DLA’s RP001 packaging requirements for palletization. For non-hazardous materials, packaging must meet ASTM D3951, but all DLA technical and quality requirements take precedence, particularly those referenced by R or I numbers from the DLA Master List. The item is not classified as hazardous under FED-STD-313, but any hazardous material claims must be disclosed and labeled per applicable federal regulations and MIL-STD-129. Deliveries are to be made FOB destination to Fort Lewis, WA 98433-9500 within five days of order receipt, with inspection and acceptance performed by the government at the destination. The total quantity required is 171 packages across four CLINs, though unit prices are not provided, indicating this is a solicitation where offerors must submit pricing. The solicitation number is SPE2DS-26-T-240T, issued July 16, 2026, with responses due by July 22, 2026, via the DIBBS portal. Contract clauses include requirements for cybersecurity safeguarding under DFARS 252.204-7012, employment eligibility verification, combating trafficking in persons, sustainable products, hazardous material identification, and whistleblower protections. The contract mandates compliance with FAR 52.246-2 for destination inspection, WAWF for electronic invoicing, and representation of small business status. The contracting office is the Department of Defense’s Medical Supply Chain, with Tiffany Parker listed as the primary point of contact. No contract type or value is specified, reflecting that these will be determined upon award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

PAD, POST SURGICAL, OThe contract pertains to the procurement of post-surgical obstetrical pads designed for additional leakage protection, featuring a poly backing, with each package containing 12 bags of 14 pads each for a total of 168 units per package. The item is identified by the NSN 6510-01-585-7696 and is solicited under SPE2DS-26-T-241P, with a response deadline of July 22, 2026, and a required delivery within 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract incorporates DLA packaging standards, mandates the removal of government identification from non-accepted supplies, and applies to covered defense information. Bidders must clearly identify the source and part number being offered. The purchase is for one package, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance delivered to APO 96319-5024, and primary point of contact is Seth Tootell.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape, designated as Medipore, with dimensions of 6 inches wide by 10 yards long, packaged in quantities of 12 rolls per unit, totaling 20 packages. The item is identified by NSN 6510-01-588-1947 and must comply with strict shelf-life requirements, including a minimum shelf life of 60 months from the date of manufacture, with no more than 51 months having elapsed between the manufacturer’s production date and delivery to the government. All packaging and labeling must adhere to the latest revision of MMS1A, clearly indicating the date of manufacture, expiration or retest date, and the contract and lot numbers. The tape must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific requirements RA001, RS023, RD003, RP001, and RQ011 applying. Packaging must conform to DLA standards, and government identification must be removed from any non-accepted supplies. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-244Y, has a response deadline of July 22, 2026, with delivery expected within 20 days of award, and the item is sourced through the Department of Defense’s Medical Supply Chain for delivery to FPO, 96672-4090.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 17 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 17 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE