Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Marel Scale Preventive Maintenance & Calibration Services

Active

Federal

Response Deadline08/13/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract provides for routine inspection, preventive maintenance, and calibration services for Marel M1100/PL2262 and M1100-PL3260 scales to ensure ongoing operational accuracy and adherence to federal standards. These services are critical to maintaining the integrity of measurement systems used in federal operations, with emphasis on compliance, reliability, and performance consistency. The work involves scheduled maintenance protocols and precision calibration procedures tailored to the specific technical requirements of the listed scale models. The contract is classified as a subcontract under NAICS code 811211 and is issued by the Department of Commerce through its WAD-NMFS-Seattle office. It was posted on July 30, 2026, with a response deadline of August 13, 2026. The place of performance and specific location details are not defined, indicating the services may be required at multiple federal sites. No set aside designation is specified, and the contract is accessible through the FedConnect portal for interested applicants.

General Info

Routine maintenance and calibration of Marel scales for federal compliance, issued by Department of Commerce.

Agency

Department Of Commerce → WAD-NMFS-SeattleView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 06:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce → WAD-NMFS-Seattle

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce → WAD-NMFS-Seattle

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Routine inspection, preventive maintenance, and calibration of Marel M1100/PL2262 and M1100-PL3260 scales to ensure operational accuracy and compliance with federal standards.

Similar Contracts

Same NAICS industry code

Quality Assurance & AQL Inspection ServicesThe contract requires the execution of AQL inspections on cable assemblies in accordance with MIL-STD-105E, applying an Acceptable Quality Level of 1.0 for major defects and 4.0 for minor defects. All inspections must be thoroughly documented with final inspection reports and non-conformance issues must be systematically tracked and reported to ensure compliance with quality standards. The work is classified as a subcontract under the NAICS code 811211, and performance is to occur at a facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, under the auspices of the ASC Commodities Division within the Department of Defense.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Bar-Coding and Marking Services

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical Equipment Installation and Integration SupportThe contract requires on-site installation, calibration, and integration of KARL STORZ medical equipment with existing clinical systems at a location in Eagan, Minnesota, with a zip code of 55121. The work involves close coordination with VA IT and clinical staff to ensure seamless operation and compliance with institutional standards. This is a subcontract designated as a Service-Disabled Veteran-Owned Small Business set-aside, meaning only businesses owned and controlled by service-disabled veterans are eligible to bid. The NAICS code 811211 identifies the work as medical equipment repair and maintenance services. The solicitation was posted on July 30, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Veterans Affairs through Network Contract Office 23.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Preventative Maintenance Services for CRxFlex II X-ray SystemsThe contract requires comprehensive preventative maintenance services for two CRxFlex II X-ray systems located at Seymour Johnson Air Force Base in Goldsboro, North Carolina, with a ZIP code of 27531. The scope of work includes performing mechanical inspections, electrical checks, optical cleaning, system alignment, and full calibration to ensure optimal performance and safety of the X-ray equipment. All services must be carried out in accordance with manufacturer specifications and applicable military standards to maintain operational readiness. The contract is structured as a small business set-aside under NAICS code 811211, indicating it is reserved exclusively for small business concerns as defined by the Small Business Administration. The opportunity was posted on July 30, 2026, with a firm deadline for responses on August 13, 2026, at 2:00 PM. The contracting activity is managed by the 4th Cons Squadron CC under the Department of Defense, and while no specific point of contact is listed, all work must be completed at the designated place of performance in Goldsboro.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

Radiographic Room (X-Ray) Equipment MaintenanceThe contract entails comprehensive preventive and corrective maintenance services for LUMINOS DEF MAX radiographic rooms, covering critical components such as the generator, patient table, detector, software systems, and all associated safety compliance measures. Maintenance must ensure uninterrupted operational performance, adherence to regulatory standards, and prompt resolution of any malfunctions to minimize downtime in clinical environments. The scope requires skilled technical personnel with expertise in advanced radiographic equipment to perform routine inspections, calibration, repairs, and software updates as needed. This subcontract is issued under the NAICS code 811211 and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The solicitation was posted on July 30, 2026, with a response deadline of August 14, 2026. While specific performance location details are not provided, the work is expected to occur at VA facilities where LUMINOS DEF MAX systems are installed. The contract emphasizes reliability, compliance, and operational readiness to support uninterrupted medical imaging services for veterans.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Repair and Maintenance for C-Arm Imaging SystemsThe contract requires comprehensive preventive and corrective maintenance services for CIOS ALPHA mobile C-arm imaging systems, encompassing all critical components including X-ray tubes and detectors, with specific attention to calibration, software updates, and full documentation of all work performed. This maintenance must ensure continued operational readiness and compliance with technical standards for medical imaging equipment used in clinical environments. All servicing must be performed by qualified personnel using approved procedures and parts to maintain system integrity and regulatory compliance. The contract is categorized as a subcontract under NAICS code 811211, issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, at 7:00 PM. Performance location details are not specified, and no set-aside designation is indicated. Interested parties must submit proposals by the stated deadline to be considered for award, and successful bidders will be expected to deliver consistent, documented support to maintain the reliability and safety of the C-arm systems across the VA’s healthcare network.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Preventive and Corrective Maintenance for CT ScannersThe contract requires comprehensive on-site preventive and corrective maintenance services for SOMATOM DEFINITION FORCE CT scanners, encompassing diagnostic evaluations, hardware replacements, software updates, and detailed service reporting, all to be completed within seven days of service initiation. This work is critical to ensuring operational reliability and compliance with clinical standards for medical imaging equipment used in VA facilities. The contract is classified as a subcontract under NAICS code 811211, with a response deadline of August 14, 2026, and was posted on July 30, 2026. It is administered by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22 (36C262), with no specified set-aside type or geographic restrictions for performance. While no point of contact or location details are provided, the work is expected to occur at various VA medical facilities where the scanners are deployed.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Preventative Maintenance Services for Motorized Bed LiftsThe contract requires the performance of two annual preventative maintenance cycles on eight Vidir Motorized Storage Bed Lifts, encompassing comprehensive inspections, lubrication, calibration, safety checks, and thorough documentation for each unit. All services must be completed in accordance with industry standards to ensure operational reliability and patient safety, with detailed records maintained for each maintenance event. The work is scheduled to take place at the facility located in Loma Linda, California, with the zip code 92357. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the Federal Acquisition Regulation, classified under NAICS code 811211. The solicitation was posted on July 30, 2026, and responses are due by August 13, 2026. The contracting office is the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, and the award will be made to a qualified SDVOSB capable of delivering timely, high-quality maintenance services in compliance with all contractual requirements.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Vehicle Upfitting – Emergency Lighting & Electronics InstallationThe contract outlines the upfitting of police vehicles with specialized electronic and lighting systems mandated by law enforcement standards, including the installation of LED spot lamps, SYNC 4 infotainment system, backup camera, and emergency lighting. All components must be integrated to meet official operational requirements, ensuring functionality, durability, and compliance with protocol for patrol and emergency response use. The work is classified as a subcontract under NAICS code 811211 and is being procured by the Purchasing Department of Imperial County in California. The solicitation was posted on July 30, 2026, with a firm deadline for responses set for August 11, 2026, at 9:00 PM Pacific Time. The installation must occur at a location determined by the agency, though specific address details are not provided. Bidders are expected to demonstrate technical capability in adhering to law enforcement specifications, and the contract does not specify any set-aside provisions or minority business preferences. Interested parties must access the full opportunity through the provided vendor portal link to submit proposals.

Purchasing Department of Imperial County

POSTED

DEADLINE

Destination Inspection Coordination and Quality AssuranceThe contract requires comprehensive support for destination inspection activities under FAR 52.246-2, ensuring compliance with Department of Defense quality standards for delivered items. This includes the accurate and timely documentation of inspections through the Wide Area Workflow system, diligent tracking of non-conforming materials, and active coordination with DoD inspection teams to resolve quality issues and maintain supply chain integrity. All tasks must be executed with precision to meet federal contractual obligations and support efficient acceptance of goods at final delivery points. The subcontract focuses on quality assurance functions tied to the inspection process, emphasizing thorough recordkeeping, prompt resolution of discrepancies, and seamless communication with government representatives. The solicitation is open for responses until August 6, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The North American Industry Classification System code 811211 indicates the work relates to repair and maintenance services, suggesting the contractor may be engaged in supporting equipment or system readiness through inspection and documentation compliance. No specific location is listed for performance, implying the work may be conducted across multiple DoD delivery sites.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

RFID and Barcoding Labeling ServicesThis contract entails the application of RFID tags and barcode labels across item, case, and pallet levels to meet stringent Department of Defense standards, including Unique Identification, National Stock Number, Federal Supply Classification, and requisition number compliance. The services are designed to ensure accurate tracking, inventory management, and logistics traceability throughout the defense supply chain, enabling seamless integration with DoD systems. The work is performed under a subcontract awarded by the Defense Logistics Agency under the NAICS code 811211, with performance obligations tied to federal defense logistics requirements. The contract was posted on July 29, 2026, and is linked to the award record SPE1C126F5484 through the DIBBS portal, indicating active participation in DoD procurement systems. Although specific geographic placement of performance is not detailed, the scope is mission-critical and supports defense readiness by standardizing identification and data capture at all packaging tiers. Compliance with DoD UID and related specifications is mandatory, ensuring that all labeled items are uniquely identifiable and traceable from manufacturing through final issue.

Defense Logistics Agency

POSTED

DEADLINE

Item Unique Identification (IUID) and Data Matrix LabelingThe contract requires the application of permanent Item Unique Identification (IUID) markings using Data Matrix codes in strict compliance with MIL-STD-130 standards across all unit and packaging levels. This includes the generation of unique serial numbers for each item and the subsequent submission of complete registry data to the Department of Defense IUID database. The work demands precise labeling procedures to ensure traceability, compliance, and long-term durability of the markings under operational conditions. All deliverables must meet federal military specifications for data content, symbol quality, and placement integrity. This is a subcontract issued by the ACTIVE DEVICES DIVISION under the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation, identified under NAICS code 811211, was posted on July 29, 2026, with responses due by August 10, 2026. The contracting vehicle is managed through the DIBBS system, and bidders must ensure full adherence to technical and regulatory requirements for IUID compliance without exceptions. There is no set-aside designation specified, making it open to all eligible subcontractors capable of meeting the defined technical and logistical obligations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Commerce → WAD-NMFS-Seattle

Same awarding agency

Travel & Field Service Logistics CoordinationThe contract requires comprehensive coordination of technician travel, lodging, and on-site logistics to support the servicing of scales at multiple NOAA/NMFS facilities across the United States, including key locations such as Woods Hole, Massachusetts, and Seattle, Washington. This effort involves managing all logistical elements necessary for technicians to efficiently perform maintenance and calibration tasks at remote federal sites, ensuring minimal disruption to operations and timely completion of service requirements. The scope encompasses scheduling, transportation, accommodations, and coordination with facility personnel to facilitate seamless field service events. This is a subcontract under NAICS code 561520, posted on July 30, 2026, with a response deadline of August 13, 2026. The contracting activity is managed by the WAD-NMFS-Seattle office under the U.S. Department of Commerce, and performance will occur at various NOAA/NMFS locations nationwide. There is no set-aside designation specified, and the contract is open to eligible subcontractors responding to the solicitation through FedConnect. All necessary field service activities must be planned and executed in alignment with federal operational standards and timelines, with emphasis on reliability, precision, and adherence to facility protocols.

POSTED

DEADLINE

Technical Documentation & Service ReportingThe contract titled Technical Documentation & Service Reporting requires the consistent generation and submission of detailed service reports, maintenance logs, calibration certificates, and all necessary compliance documentation for every service event performed under the agreement. This subcontract is focused on ensuring full traceability, regulatory adherence, and operational transparency through accurate and timely recordkeeping tied directly to technical service activities. The work is governed under NAICS code 541611, which classifies it under Management, Scientific, and Technical Consulting Services, indicating a need for specialized technical expertise and documented procedural rigor. The solicitation was posted on July 30, 2026, with a firm response deadline of August 13, 2026, and is managed by the WAD-NMFS-Seattle office under the U.S. Department of Commerce. There is no designated set-aside classification, and the place of performance details are not specified, suggesting the work may be performed remotely or across multiple locations. All deliverables must align with federal standards for technical documentation and service accountability, though no point of contact is listed publicly. Interested parties must submit proposals through the FedConnect portal using the provided link before the stated deadline.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Spare Parts Supply for Marel ScalesThe contract pertains to the supply of original equipment manufacturer or approved replacement components for Marel M1100/PL2262 and PL3260 scale models, including critical parts such as load cells, display units, power supplies, and interface boards. These components are essential for maintaining the operational integrity and accuracy of the specified scale systems, ensuring continued compliance with federal measurement and weighing standards. The contract is structured as a subcontract under the NAICS code 423690, indicating it falls within miscellaneous nondurable goods merchant wholesalers, and is issued by the Department of Commerce through its WAD-NMFS-Seattle office. The solicitation was posted on July 30, 2026, with a response deadline of August 13, 2026, providing potential suppliers a limited window to submit proposals. There is no set-aside designation specified, meaning the competition is open to all eligible entities regardless of size or certification status. Performance location details are not defined, suggesting components may be shipped to various federal facilities or field operations managed by the National Marine Fisheries Service. All supplies must meet strict OEM or approved equivalency standards to ensure reliability and interoperability with existing Marel systems in use across federal operations.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

On-Demand Repair & Troubleshooting for Marel ScalesThe contract pertains to on-demand repair and troubleshooting services for Marel scales, encompassing diagnostics, replacement of faulty components, and full system recovery to restore operational functionality. Services are to be performed as needed in response to malfunctions or physical damage, ensuring minimal disruption to equipment use in critical environments. The work falls under NAICS code 811212, categorizing it as repair and maintenance services, and is structured as a subcontract with no set-aside provisions specified. The solicitation was posted on July 30, 2026, with responses due by August 13, 2026, and the contracting entity is the Washington Department of Commerce, specifically the National Marine Fisheries Service in Seattle. Performance location details are not provided, and there is no designated point of contact listed in the posting.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Marel Marine Scale Maintenance

Solicitation # 1305M326R0014

The contract solicitation for Marel Marine Scale Maintenance, identified as 1305M326R0014, is a firm-fixed-price acquisition issued by the Department of Commerce’s WAD-NMFS-Seattle office under NAICS code 811210, with a response deadline of August 13, 2026. The work involves comprehensive maintenance, calibration, and testing of 140 to 190 JBT Marel marine scales (models M1100, PL2262, PL3260) over a base year and four optional one-year periods extending through October 2031. Services are to be performed primarily at the Observer Training Center in East Falmouth, Massachusetts, with inspections and acceptance conducted on-site by the Contracting Officer’s Representative or Facility Maintenance and Repair Division. Work must comply with JBT Marel factory specifications and meet stringent performance standards, including 95% accuracy in calibration results, timely reporting, and delivery of motion and overload test documentation. All personnel must be Marel-certified technicians, and failure to meet requirements may result in payment reductions or termination. The contract requires offerors to submit two separate volumes: a Technical Quote limited to ten pages that demonstrates compliance with the Performance Work Statement, and a Price Quote covering the base year and four option years with firm-fixed pricing for all line items, though no dollar values are published in the solicitation. Evaluation will be based on Technical and Price factors without specified weights, using a trade-off methodology rather than LPTA. Offerors must provide a Unique Entity ID, self-certify size status under the $34 million small business threshold, and comply with numerous FAR clauses, including employment eligibility verification, paid sick leave, DEI non-discrimination, sustainable procurement, and electronic payments via IPP. Key contractual requirements include indemnity for intellectual property claims, compliance with federal statutes on conflict of interest and whistleblower protections, and unrestricted access for the Comptroller General to records. Packaging, marking, and bar-code standards are not specified, and no MIL-STDs are referenced. The Contracting Officer’s Representative and detailed payment office information will be determined at award, and all proposals must be submitted by the deadline to be considered, with no electronic submission format explicitly defined in the available documentation.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Technical Documentation & As-Built DrawingsThe contract requires the preparation of comprehensive operations and maintenance manuals, as-built drawings in multiple formats including hard copy, PDF, and AutoCAD, along with complete warranty documentation adhering to federal standards. All deliverables must meet rigorous technical specifications to ensure long-term usability, compliance, and accessibility for federal stakeholders. The work is scoped under NAICS code 541490 and is categorized as a subcontract, indicating it supports a larger prime contracting effort under the Department of Commerce, specifically managed by WAD-NMFS-Seattle. Proposals must be submitted by August 10, 2026, with the solicitation posted on July 24, 2026, leaving a competitive window of approximately three weeks for qualified vendors to respond. Although specific location details for performance or contact information are not provided, the work is presumed to support federal infrastructure or facilities under the agency’s jurisdiction, likely involving marine or fisheries-related operations. All documentation must be delivered in accordance with federal requirements, emphasizing precision, formatting consistency, and regulatory alignment to ensure successful acceptance and implementation.

Other Specialized Design Services

POSTED

DEADLINE

Corrosion-Resistant Materials & Equipment SupplyThe contract requires the supply of marine-grade, corrosion-resistant exhaust fans, ductwork, fasteners, and associated electrical components, all of which must meet Buy American Act standards to ensure domestic sourcing and manufacturing. The equipment is intended for use in marine environments where exposure to saltwater and humidity demands materials with heightened durability and resistance to degradation. All items must be fully compliant with industry specifications for performance and longevity under harsh coastal or offshore conditions, and the supplier is expected to deliver complete, ready-to-install systems without requiring additional modifications. The solicitation is categorized as a subcontract under NAICS code 333415, which corresponds to the manufacturing of industrial and commercial fan and blower equipment. The opportunity was posted on July 24, 2026, with a deadline for responses set for August 10, 2026, at 4:00 PM. The contracting activity is tied to the National Marine Fisheries Service under the U.S. Department of Commerce in Seattle, indicating the end-use is likely within federal marine facilities, research stations, or vessels. While specific performance locations and point of contact details are not provided, interested parties must ensure full adherence to U.S. content and manufacturing requirements and submit proposals prior to the stated deadline via the FedConnect portal.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Electrical Integration & Power SystemsThe contract encompasses the electrical installation of new exhaust fans with full integration of conduit systems, disconnect controls, and grounding infrastructure to support 480V, 3-phase power systems. All work must adhere strictly to the safety and performance standards outlined in NFPA 70 and NFPA 110, ensuring compliance with national electrical code requirements and emergency power system protocols. The installation is part of a broader electrical integration effort for a federal facility operated by the Department of Commerce’s WAD-NMFS-Seattle office, with performance expected to meet rigorous technical and regulatory benchmarks for industrial electrical systems. This subcontract, posted on July 24, 2026, is classified under NAICS code 238210 for electrical contracting and requires proposals to be submitted by August 10, 2026. The work is to be performed at an unspecified location within the agency’s operational jurisdiction, with all materials and labor expected to satisfy federal procurement standards. While no set-aside provisions are specified, bidders must demonstrate proven experience with high-voltage commercial and industrial installations, particularly those involving exhaust ventilation systems compliant with NFPA standards. All aspects of the project, from design to commissioning, must ensure seamless integration with existing power infrastructure and maintain uninterrupted operational continuity.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Exhaust Fan Removal & Installation (HVAC)The contract calls for the removal and installation of AXCL 1225 exhaust fans rated at 1HP, 480V, and 3-phase on the laboratory roof, with all work performed in a marine environment requiring corrosion resistance and durability. The scope includes full rigging operations, vibration isolation to minimize structural transmission, and seamless integration with existing ductwork systems to ensure proper airflow and compliance with environmental controls. All work must adhere to stringent standards for safety, performance, and longevity under high-salt, high-humidity conditions typical of coastal marine settings. The solicitation is classified as a subcontract under NAICS code 238220 for HVAC installation, with a response deadline of August 10, 2026, and a posted date of July 24, 2026. The contracting agency is the Department of Commerce through its WAD-NMFS-Seattle office, though specific location details are not provided. The project requires experienced contractors familiar with marine-grade HVAC systems and laboratory environmental requirements, with all materials and methods selected to ensure operational reliability and minimal maintenance over time.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Laboratory Fume Hood System Assessment & CommissioningThe contract entails the comprehensive assessment, performance testing, and commissioning of fume hood systems across laboratory facilities to ensure each unit maintains a face velocity of exactly 100 feet per minute, in full compliance with the industry standards set by ASHRAE 110 and ANSI/AIHA Z9.5. This work is critical to verifying the safety and efficiency of ventilation controls within laboratory environments, ensuring proper containment of hazardous substances and protecting personnel health. All activities must adhere strictly to the specified performance benchmarks and documented testing protocols outlined in the referenced standards. The solicitation is for a subcontract under the Department of Commerce through its WAD-NMFS-Seattle office, with a posted date of July 24, 2026, and a response deadline of August 10, 2026. The work is governed by NAICS code 541330, indicating it falls under engineering services, and does not specify a set-aside classification. The place of performance details are not provided, but the scope is clearly defined by the technical requirements. Contractors must be prepared to deliver detailed reporting on compliance validation, with no flexibility on the 100 fpm velocity requirement or adherence to the recognized safety standards.

Engineering Services

POSTED

DEADLINE

Santa Cruz Laboratory Facility Repairs and Replace

Solicitation # 1305M326Q0066

The contract involves repairs and replacement work at the Santa Cruz Laboratory Facility under solicitation number 1305M326Q0066, issued by the National Oceanic and Atmospheric Administration through the Department of Commerce’s Seattle office. The solicitation was posted on July 24, 2026, with a response deadline of August 10, 2026, at 4:00 PM Pacific Time. The work falls under NAICS code 236220, categorizing it as commercial and institutional building construction, and is intended for federal execution. Contracting Officer Rachel Stone is the designated point of contact, reachable via email at rachel.stone@noaa.gov, and all correspondence and submissions must be directed through the FedConnect portal listed in the solicitation. The place of performance is the Santa Cruz Laboratory Facility, though the specific address details are not provided in the contract data, applicants are expected to confirm site access and requirements independently. The solicitation does not specify a set-aside designation, meaning it is open to all eligible contractors without restrictions based on small business size or other categories.

Commercial and Institutional Building Construction

POSTED

DEADLINE