Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Marine Coating and Preservation Services

Active

Federal

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine Coating and Preservation Services involves performing surface preparation and applying protective coatings for prime contractors on US Coast Guard vessel projects. The work must be executed according to SFLC Standard Specification 6310, with strict adherence to standards for soluble salt conductivity, surface profile, and dry film thickness measurements. The project is a total small business set-aside under NAICS code 238320 and is managed by the Department of Homeland Security's SFLC Procurement Branch 3. Qualified providers must hold AMPP Senior Inspector, NACE Level 3, or QP-1 certifications and are required to deliver comprehensive DFT and profile logs upon completion. Responses are due by November 5, 2026.

General Info

Marine coating services for US Coast Guard vessels; responses due November 5, 2026.

Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

MD

Set-Aside

SBA

Documents

This scope was carved out of 70Z04026QSBPL0015.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Dry-Dock: USCG ANT PUGET SOUND (55107) FY27 DD

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 25

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface preparation and applies protective coatings for prime contractors on US Coast Guard vessel projects. Executes preservation per SFLC Standard Specification 6310, including soluble salt conductivity (SSPC-Guide 15), surface profile (ASTM D4417), and DFT measurements (SSPC-PA 2). Requires AMPP Senior Inspector, NACE Level 3 or QP-1 Certification. Delivers coated structures with DFT and profile logs.

Similar Contracts

Same NAICS industry code

Interior PaintingThis subcontract for interior painting involves providing professional coating services for prime contractors on facility projects within the Little Lake City School District in Santa Fe Springs, California. The scope of work includes masking and protecting adjacent surfaces, applying coatings according to manufacturer recommendations, and performing necessary touch-ups following substantial completion. All materials used must strictly adhere to the VOC content restrictions specified in Section 01 61 16. The opportunity was posted on September 26, 2026, with a response deadline of October 20, 2026. Classified under NAICS code 238320, the contract requires the delivery of fully completed interior painted surfaces that meet the district's quality and environmental standards.

Little Lake City School District

POSTED

DEADLINE

Lakeside MS Paint & Flooring

Solicitation # 26-27-003

The Little Lake City School District is soliciting bids for the Lakeside MS Paint and Flooring project, located in Santa Fe Springs, California. This project involves comprehensive painting and flooring services, including the installation of resilient plank, resilient tile, and resilient base, as well as the application of special finishes. Due to the presence of lead-based paint and presumed asbestos-containing flooring and mastic, the contractor must provide temporary dust, odor, and containment barriers and adhere to all federal, state, and local environmental regulations. The contract requires the use of high-quality materials, including Sherwin-Williams paint and flooring that meets CalGreen Building Standards and ADA slip-resistant requirements. Bids are due by October 20, 2026, and will be awarded to the lowest responsible and responsive bidder. Applicants must be pre-qualified prime contractors holding a current State of California contractor's license. The submission must include a bid security of at least 10 percent of the maximum bid amount, and the successful contractor will be required to provide performance and payment bonds. The project is a prevailing wage contract with a 3 percent Disabled Veteran Business Enterprise participation goal. Key deliverables include completed installations, maintenance manuals, and specific quantities of extra flooring and wall base materials. A 200,000 dollar allowance is included for classroom moving services.

Little Lake City School District

POSTED

DEADLINE

Interior Painting and FinishingThe Little Lake City School District in California is seeking a subcontractor for an interior painting and finishing project located in Santa Fe Springs. The selected contractor will be responsible for painting walls and ceilings in classrooms, offices, and administration spaces, ensuring all surfaces are free of holidays and lap marks. Key technical requirements include the use of low-VOC paints, precision cutting tools for window frames and sills, and the application of masking to prevent overpray. Eligible bidders must hold a standard painting contractor license and adhere to NAICS code 238320. This opportunity was posted on September 26, 2026, with a response deadline of October 20, 2026.

Little Lake City School District

POSTED

DEADLINE

Lakeland ES Interior Paint & Flooring

Solicitation # 20260925023

The Little Lake City School District is soliciting bids for interior paint and flooring improvements at Lakeland Elementary School in Santa Fe Springs, California. The project encompasses comprehensive updates to every classroom, office, and administration space, including the installation of 20 mil resilient plank flooring, rubber cove stick base, and walk-off mats. The scope also includes the preparation and painting of all existing painted surfaces, such as acoustical ceilings, walls, and HMW windows and doors, as well as the installation of new Wilsonart solid surface countertops and the refurbishment of existing casework with new hardware. Contractors must adhere to strict environmental and safety standards, as all existing interior paint is considered lead-based and must be handled per 8 CCR 1532.1. Additionally, the abatement and demolition of existing flooring must be performed in strict accordance with the provided ACM report and work scope. Key requirements include the field verification of all dimensions and conditions prior to bidding, the full removal of furniture and equipment from work areas, and the submission of a complete color palette for approval. All work must be completed according to the construction schedule to ensure spaces are ready for students and staff. The response deadline for this solicitation is October 20, 2026.

Little Lake City School District

POSTED

DEADLINE

Specialized Interior Finishes (Wash-down/Industrial)Associated Engineering (Alberta) Ltd. is seeking a subcontractor for the Specialized Interior Finishes project at the Athabasca Regional Waste Management Services Commission facility. The scope of work involves installing durable, moisture-resistant, and chemical-resistant wall and floor finishes across five service bays and one wash bay to ensure the garage area has washable interior surfaces. Interested parties must submit their responses by October 16, 2026. This subcontract falls under NAICS code 238320 and focuses on providing industrial-grade finishes tailored for high-durability environments.

Associated Engineering (Alberta) Ltd.

POSTED

DEADLINE

Commercial Interior and Exterior PaintingThis subcontract for Commercial Interior and Exterior Painting involves providing professional painting services for prime contractors on facility projects at Kennesaw State University. The scope of work includes the application of latex and oil-based paints, primers, sealers, and elastomeric coatings in accordance with commercial product application procedures to deliver finished interior and exterior surfaces. Qualified providers must possess a minimum of five years of experience in commercial paint application. The opportunity is categorized under NAICS code 238320 and was posted on September 25, 2026, with a response deadline of October 27, 2026.

Kennesaw State University

POSTED

DEADLINE

in about 1 month

KSU FY27 Task Order for Painting and Related Maintenance Contractor Servicess

Solicitation # 54300-eRFQ-00204-0-2027

Kennesaw State University, acting on behalf of the Campus Operations Division, is soliciting Statements of Qualifications for task order contractor services to perform interior and exterior painting and related maintenance across various campus facilities. This solicitation, identified as 54300-eRFQ-00204-0-2027, utilizes a Construction Manager/General Contractor format with lump sum and Guaranteed Maximum Price (GMP) contract pricing. The scope of work includes the application of latex and oil-based paints, primers, sealers, and elastomeric coatings, as well as exterior cleaning using high- and low-pressure systems. Additionally, the selected contractor must be capable of lead-based paint remediation, containment, and disposal, and must be able to perform necessary carpentry and masonry repairs to prepare substrates. Qualified firms must demonstrate at least five years of experience in commercial painting and application procedures. Technical requirements include the ability to safely operate aerial lifts or utilize rope access for project completion. Interested providers must submit their qualifications by October 27, 2026, and are required to provide a Contractor Affidavit, a Statement of Bidders Qualifications, and a Certificate of Non-Collusion. The process also requires registration in the GA@WORK Marketplace and adherence to specific insurance and bonding requirements. Primary contact for this solicitation is Tommie Goodgames.

Kennesaw State University

POSTED

DEADLINE

in about 1 month

Specialized Coating ContractorThis subcontract opportunity is for a Specialized Coating Contractor to provide protective coating services for manholes and structures on projects managed by the City of Chesapeake Department of Public Utilities. The selected contractor will be responsible for surface preparation and the application of industrial protective coatings in strict accordance with Section 109-14. A critical requirement of the contract is the delivery of a signed Manhole/Structure Protective Coating Post Installation Certification upon completion of the work. Interested parties must submit their responses by October 27, 2026, under NAICS code 238320.

Public Utilities

POSTED

DEADLINE

in about 1 month

Interior Painting & WallcoveringsAlcorn State University is seeking a subcontractor for interior painting and wallcoverings under NAICS code 238320. The selected provider will work with prime contractors to perform surface priming, paint walls and trim, and install commercial wallcoverings to deliver finished interior surfaces for university facility projects. Eligible bidders must possess valid Mississippi contractor licenses. The solicitation was posted on September 25, 2026, and the deadline for responses is October 29, 2026.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

in about 1 month

Warehouse Epoxy Line Striping and Floor MarkingThis subcontract for the Mississippi Department of Revenue involves providing high-visibility industrial floor striping and location numbering for warehouse projects. The scope of work includes washing epoxy floors, sanding to CSP 2-3, and applying a two-part epoxy yellow base coat finished with an aliphatic polyurethane topcoat. The project requires marking 13,250 linear feet of walkways and 9,500 linear feet of pallet footprints in strict accordance with OSHA 29 CFR 1910.22 and ANSI Z535.1 standards. The final deliverable is a fully cured, high-visibility floor system under NAICS code 238320, with a response deadline of October 21, 2026.

MS DEPT of REVENUE

POSTED

DEADLINE

Carpentry and OpeningsThis subcontract for Alcorn State University involves the installation of interior partitions, doors, window frames, and cabinetry for prime contractors on facility projects. The scope of work specifically includes the installation of fire-rated doors, window replacements, and the placement of commercial-grade medical storage cabinetry and millwork. Eligible providers must hold a valid Carpentry or General Contractor License to perform these services. The solicitation was posted on September 25, 2026, with a response deadline of October 29, 2026, under NAICS code 238320.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

in about 1 month

Striping and Protection Equipment and Labor

Solicitation # 3160008281

The Mississippi Department of Revenue is soliciting bids for striping and protection services at the Alcoholic Beverage Control Distribution Center's new warehouse located at 183 Watford Parkway Drive in Canton, Mississippi. The project involves providing all labor, materials, and equipment for epoxy line striping and the installation of protective devices, including bollards, guard rails, and barriers. Specific deliverables include approximately 13,250 linear feet of walkways, 9,500 linear feet of pallet footprint locations with 583 numbered spots, 1,120 linear feet of receiving lanes with 28 numbered locations, and 620 linear feet of lift equipment parking with 40 numbered locations. Technical specifications require a concrete surface profile of 2 to 3, a 100 percent solids two-part yellow epoxy base coat, and a clear chemical-resistant aliphatic polyurethane topcoat. All high-visibility striping must comply with OSHA 29 CFR 1910.22, OSHA 29 CFR 1910.144, and ANSI Z535.1 standards. The contract term is for two months, running from December 4, 2026, to February 4, 2027. Bids must be submitted in a sealed package by October 21, 2026, at 12:00 p.m. CST. The award will be granted to the responsive and responsible bidder offering the lowest grand total price. To be considered responsible, bidders must have at least five years of experience in industrial or commercial striping and facility protection. Additionally, bidders must provide four current references and achieve a minimum score of six points per reference from two interviewed references, totaling at least twelve points. The contract is governed by the Mississippi Public Procurement Review Board Office of Personal Service Contract Review Rules and Regulations.

MS DEPT of REVENUE

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

Sacrificial Anode SupplierThis subcontract opportunity, managed by the Department of Homeland Security's Sflc Procurement Branch 3, involves the supply of sacrificial zinc alloy anodes for hull protection on US Coast Guard vessel projects. The selected supplier will provide anodes that strictly adhere to MIL-DTL-18001L (Notice 2) and ASTM B418 specifications, ensuring all materials are delivered directly to the designated project sites. The contract is designated as a total Small Business Set Aside under NAICS code 332999. Interested parties must submit their responses by the deadline of November 5, 2026, following the posting date of September 25, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

Drydocking Stability and Engineering CalculationsThis subcontract opportunity, managed by the Department of Homeland Security's SFLC Procurement Branch 3, involves providing technical stability and engineering calculations for prime contractors working on US Coast Guard vessel projects. The selected provider will be responsible for delivering pre-award and post-award drydocking calculations in accordance with Work Item D-023 and SFLC Standard Specification 8634_STD Appendix A. These tasks require the use of specialized naval architecture software to produce formal drydocking calculation reports and stability certifications. The project is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must submit their responses by the deadline of November 5, 2026. This engagement focuses on ensuring the technical stability and safety of vessels during the drydocking process through precise engineering analysis.

Engineering Services

POSTED

DEADLINE

in about 1 month

Hull Plating and Underwater Body InspectionThis subcontract, titled Hull Plating and Underwater Body Inspection, is issued by the Department of Homeland Security through the Sflc Procurement Branch 3. The project involves providing specialized inspection services for prime contractors on US Coast Guard vessel projects, focusing on the detection of corrosion, damage, or degradation of underwater bodies and hull plating. All work must be performed in accordance with NAVSEA Underwater Ship Husbandry Manuals using non-destructive testing equipment, ultrasonic thickness gauges, and underwater cameras, with the final deliverables consisting of detailed inspection reports and Critical Inspection Reports. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Marine Welding and Structural FabricationThis subcontract opportunity involves marine welding and structural fabrication services for US Coast Guard vessel projects under the Department of Homeland Security. The scope of work includes performing general welding and structural fabrication on vessel hulls and internal structures for prime contractors. All work must strictly adhere to SFLC Standard Specification 0740_STD and NAVSEA Technical Publication T9074-AD-GIB-01/1688, requiring specific welding certifications and qualifications to ensure the delivery of certified welded joints and fabricated structural components. The contract is designated as a total Small Business Set-Aside under NAICS code 331511. Managed by the SFLC Procurement Branch 3, the solicitation is scheduled to be posted on September 25, 2026, with a response deadline of November 5, 2026. Interested parties must meet the rigorous technical standards and certification requirements necessary to support Coast Guard maritime operations.

POSTED

DEADLINE

in about 1 month

Underwater Body Inspection and ReportingThis subcontract for the Department of Homeland Security's SFLC Procurement Branch 3 involves performing detailed underwater hull and component inspections for US Coast Guard projects. The selected contractor will utilize diving gear or ROVs to complete essential documentation, specifically the Underwater Body Inspection Work Sheets and Under Water Body Paint Reports, while ensuring full compliance with Coast Guard Technical Publication 4993 and SWBS 634. The opportunity is designated as a total Small Business Set Aside under NAICS code 541370. Interested parties must submit their responses by October 28, 2026, to support prime contractors in delivering the required inspection forms and reporting.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in about 1 month

NACE/AMPP Coating Inspection ServicesThis subcontract for NACE/AMPP Coating Inspection Services supports the Department of Homeland Security's SFLC Procurement Branch 3 by providing quality assurance and inspection of hull coatings and corrosion control. The selected provider will be responsible for inspecting underwater body paint and surface preparation, verifying coating thickness and adhesion through environmental monitoring equipment and thickness gauges, and delivering detailed inspection reports and certifications of compliance. The opportunity is designated as a total Small Business Set Aside under NAICS code 541620. Qualified candidates must hold an AMPP Senior Inspector, NACE Level 3, or QP-1 Certification. The response deadline for this requirement is October 28, 2026.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Marine Welding and FabricationThis subcontract for Marine Welding and Fabrication is issued by the Department of Homeland Security under the SFLC Procurement Branch 3. The contractor will perform structural welding and metal fabrication repairs on vessel hulls and internal structures for prime contractors on US Coast Guard SFLC projects. All work must be executed using industrial welding and cutting equipment in strict accordance with SFLC Standard Specification 0740_STD, requiring the delivery of certified welding reports and completed weldments. The opportunity is designated as a total Small Business Set Aside under NAICS code 238210. Interested parties must submit their responses by the deadline of October 28, 2026. Certified welding procedures and certifications are mandatory requirements for the execution of this contract.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Dry-docking and Vessel Support ServicesThis subcontract for Dry-docking and Vessel Support Services involves the physical lifting, docking, and supporting of the USCG STA CAPE MAY for prime contractors on US Coast Guard SFLC projects. The selected provider must execute haul-out and placement on blocks or cradles, provide temporary power and water according to SFLC Standard Specification 8635, and deliver dry-docking calculations in accordance with SFLC Standard Specification 8634_STD. The project requires the use of a CG Approved Drydock, Travel Lift, or Drydock Cradle to ensure the vessel is safely docked. This opportunity is a total Small Business Set Aside under NAICS code 336611 and is managed by the Department of Homeland Security through the SFLC Procurement Branch 3. Responses are due by October 28, 2026.

Ship Building and Repairing

POSTED

DEADLINE

in about 1 month

Dry-Dock: USCG ANT PUGET SOUND (55107) FY27 DD

Solicitation # 70Z04026QSBPL0015

Solicitation 70Z04026QSBPL0015 is a request for quotes for the FY27 dry-docking repairs and alterations of the USCG STA PUGET SOUND (55107). This firm-fixed price contract is 100% set aside for Women-Owned Small Businesses and is managed by the Sflc Procurement Branch 3. The period of performance is scheduled from February 16, 2027, to July 16, 2027. The scope of work includes 40 specific items such as hull plating inspection, ultrasonic testing, main diesel engine alignment, and the renewal of fuel valves, all performed in accordance with SFLC Standard Specifications and other industry standards like ASME and NACE. The government will award the contract based on the lowest price technically acceptable approach, evaluating technical capability, total evaluated price, and past performance from the last two years. Offerors must submit their quotes by November 5, 2026, and must be registered with the Joint Certification Program to access vessel drawings. Required submission documents include a signed SF1449, an Excel pricing spreadsheet, welding certifications, proof of insurance, and specific inspector certifications. Payment will be made via the Invoice Processing Platform based on the stage of completion, with 10 percent of the total contract price withheld until final acceptance.

Ship Building and Repairing

POSTED

DEADLINE

in about 1 month

Dry-Dock: USCG STA CAPE MAY (45665) FY27 UWB

Solicitation # 70Z04026QSBPL0016

This solicitation, numbered 70Z04026QSBPL0016, is a request for quotes from the U.S. Coast Guard for the FY27 drydocking repairs and alterations of the vessel USCG STA Cape May (45665). The contract is designated as a Total Small Business Set-Aside under NAICS code 336611. The required period of performance is scheduled from January 6, 2027, to February 4, 2027, with an anticipated award date around November 12, 2026. The scope of work includes a variety of technical tasks such as general welding, ultrasonic testing, hull plating inspection, fendering system repairs, diesel fuel tank cleaning, and water jet services. The government intends to award a firm-fixed-price contract using the lowest price technically acceptable (LPTA) approach, evaluating offers based on technical acceptability, price reasonableness, and past performance. Interested offerors must submit their quotes electronically to the designated point of contact no later than October 28, 2026, at 2:00 PM EST. Submissions must include a completed SF1449, an Excel spreadsheet containing the Schedule of Supplies and Services, welding certifications, proof of insurance, and specific inspector certifications such as AMPP, NACE, or QP-1. The contract includes strict technical requirements for surface preparation, coating preservation, and non-destructive evaluation, requiring adherence to various SFLC standard specifications. Additionally, contractors must comply with regulations regarding the safeguarding of controlled unclassified information, whistleblower rights, and the Buy American Act. For vendors located more than 320 nautical miles from the performance site, detailed planning documents and foreseeable transportation costs must be included in the proposal.

Ship Building and Repairing

POSTED

DEADLINE

in about 1 month

Articulating Boom Lift Rental (150ft Platform Height)This subcontract, issued by the Department of Homeland Security's Sflc Procurement Branch 3, requires the supply and delivery of a high-reach articulating boom lift for prime contractors at the US Coast Guard Yard in Curtis Bay, Maryland. The equipment must be a JLG 1500AJP or an equivalent model featuring a 150ft platform height, 4WD capabilities, and a 360-degree swing. The selected provider is responsible for performing pre-delivery inspections and submitting the corresponding operational reports upon delivery. Additionally, all personnel must adhere to safety and branding requirements by wearing company-branded hard hats. This opportunity is designated as a total Small Business Set Aside under NAICS code 532490, with a response deadline of October 8, 2026.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Portable Toilet Cleaning and MaintenanceThis subcontract for the Department of Homeland Security, managed by Sflc Procurement Branch 3, involves providing comprehensive portable toilet cleaning and maintenance services at the CG Yard in Curtis Bay. The scope of work includes the weekly delivery of sanitary units, as well as recurring waste removal, pumping, and the replenishment of water and sanitizing chemicals using vacuum trucks. Additionally, the contractor is responsible for providing on-call cleaning services as needed to maintain sanitary standards. The opportunity is designated as a total Small Business Set Aside under NAICS code 562111. Interested parties must submit their responses by October 1, 2026. This contract ensures that prime contractors on Sflc Procurement Branch 3 projects have consistent access to clean and functional sanitation facilities throughout the duration of the project.

Solid Waste Collection

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS