Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Propulsion & Shafting Specialist

Active

Federal

Response Deadline11/16/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Marine Propulsion and Shafting Specialist, is issued by the Department of Homeland Security under agency CG-SEA-C21. The project involves providing specialized technical services for USCG vessel projects, specifically focusing on the removal, renewal, and alignment of propulsion trains for prime contractors. The scope of work includes the renewal of main diesel engines, alignment of main engine and reduction gear, and the renewal of propulsion shaft bearings, carriers, shafts, propellers, and rudder assemblies to deliver a fully installed and aligned propulsion system. The performance of this contract will take place in Santa Barbara, California, under NAICS code 336611. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline set for November 16, 2026.

General Info

DHS subcontract for USCG vessel propulsion and shafting services in Santa Barbara, California.

Agency

Department Of Homeland Security → CG-SEA-C21

NAICS

336611 - Ship Building and Repairing

Place of Performance

Santa Barbara, CA, 93109, USA

Set-Aside

NONE

Documents

This scope was carved out of 70ZU0127PBPLBLACKFIN.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC BLACKFIN (WPB 87317) DRYDOCK FY27

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 04:00:00 PM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C21

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C21

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs removal, renewal, and alignment of propulsion trains for prime contractors on USCG vessel projects. Renews Main Diesel Engines, aligns Main Engine/Reduction Gear, renews propulsion shaft bearings, carriers, shafts, propellers, and rudder assemblies. Delivers a fully installed and aligned propulsion system.

Similar Contracts

Same NAICS industry code

USCGC BLACKFIN (WPB 87317) DRYDOCK FY27

Solicitation # 70ZU0127PBPLBLACKFIN

The Department of Homeland Security, through the U.S. Coast Guard Surface Forces Logistics Center in Norfolk, Virginia, has issued a Sources Sought Notice for the FY27 drydock and dockside repairs of the USCGC BLACKFIN (WPB 87317). This notice is intended for market research purposes to identify capable sources, determine the availability of suitable commercial items, and analyze commercial practices to inform future competition and set-aside decisions. The scope of work requires the contractor to provide all necessary personnel, equipment, materials, and facilities to perform repairs at the contractor's own facility, with no geographical restrictions. Key tasks include thermographic inspections of the electrical power distribution system and the cleaning and inspection of various tanks, including dirty oil, oily water, fuel service, grey water, and sewage holding tanks. The anticipated period of performance is six calendar days, with a projected start date of November 1st and an end date of July 1st, though these dates remain subject to government discretion. The applicable NAICS code is 336611 for Ship Building and Repairing, with a size standard of 1,300 employees. Interested parties must be registered in the System for Award Management and are requested to submit their company details, business size, certification documentation, a statement of proposal submission, and past performance evidence by November 16, 2026. Responses should be directed to Michael R. Farris and Eddrian B. Logan. This notice does not constitute a formal solicitation or a commitment by the government to award a contract.

POSTED

about 5 hours ago

DEADLINE

20--WINDOW,MARINE

Solicitation # SPE7M427T1672

DLA Weapons Support

POSTED

about 5 hours ago

DEADLINE

20--WINDOW,MARINE

Solicitation # SPE7M427T1670

DLA Weapons Support

POSTED

about 5 hours ago

DEADLINE

20--ACCUMULATOR,HYDRAUL

Solicitation # N0010425RYK73

This small business set-aside solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm-fixed-price procurement for the manufacture of hydraulic accumulators (NSN 7HH 2090 016053873). The requirement was increased via amendment from 7 to 18 units. The procurement is rated for national defense use and requires strict adherence to Technical Data Package (TDP) Version 004 and ISO 9001 quality standards. A critical safety requirement mandates that all materials be mercury-free, as contamination is grounds for rejection. The contract specifies a period of performance of 180 days from the date of order, though the desired and required delivery time was updated to 740 days via amendment. DCMA must provide inspection and acceptance at the origin prior to shipment to avoid payment delays. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with a 10 percent evaluation preference applied to HUBZone small businesses. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073, with specific requirements for DLR labels and ISPM 15 treated wood for overseas shipments. Configuration control is governed by MIL-STD-973, requiring the submission of all Engineering Change Proposals to the Contracting Officer. Following multiple extensions, the final closing date for quotes was updated to January 8, 2027.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

43--SEAL ASSEMBLY,SHAFT,SP

Solicitation # SPE7M127T1307

DLA Weapons Support

POSTED

about 5 hours ago

DEADLINE

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission and remove two existing Honda BF250A outboard engines and replace them with two new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural transom inspection, the installation of new engines and Honda iST electronic control heads at dual helm stations, and the integration of the SeaStar PA1315-2 Power Assist steering system. Additionally, the contractor must replace fuel feed hoses with USCG Type A1-15 lines, install new digital gauges and ignition switches, and calibrate the NMEA 2000 network backbone. The project concludes with a static dockside systems check and a minimum two hour sea trial to validate performance and safety protocols. The Tribe will deliver the vessel to the contractor's facility, which must provide a secure, fenced yard or indoor shop. Proposals are due by November 13, 2026, and will be evaluated based on a 100 point scale, with a preference for responsible Indian Offerors. Award criteria emphasize reliability and effectiveness over the lowest cost. Selected contractors must provide insurance for injuries and property damage, and contracts exceeding 100,000 dollars require a performance bond; otherwise, a 25 percent retainage applies. All payments are subject to the Tribes appropriation process and the availability of funds in the tribal treasury.

Confederated Tribes of the Colville Reservation

POSTED

about 21 hours ago

DEADLINE

Outboard Engine Installation and IntegrationThis subcontract for Outboard Engine Installation and Integration involves the technical installation and integration of three outboard engines for fire boat projects within the Town of Stratford. The scope of work includes the removal of existing engines, the installation of new engines and mounting hardware, and comprehensive operational testing to ensure a fully functional system. All work must be performed using specialized marine installation tools and rigging equipment while maintaining strict compliance with Federal and State of Connecticut OSHA standards. Managed by DAS Procurement for the State of Connecticut under NAICS code 336611, the project was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 10, 2026, at 3:00 PM. Further details and submission guidelines can be accessed through the CTSource Bid Board.

DAS Procurement

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Abandon Ship Life Preserver VestsThis subcontract with the Department of Defense involves the manufacture and supply of 334,037 finished abandon ship life preserver vests for prime contractors delivering DLA safety equipment. The vests must be produced according to NSN 4220-01-487-2932 specifications, utilizing specific buoyancy materials and durable outer shells. The contractor is required to adhere to strict quality and logistics standards, including marking and labeling per MIL-STD-129 and packaging per ASTM D3951. Additionally, all products must pass zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Performance for this contract is based in FPO 96349-0011.

YOKOSUKA JAPAN CML PHN

POSTED

about 24 hours ago

DEADLINE

INDICATOR, ANGLE

Solicitation # SPE4A6-27-T-3611

Solicitation SPE4A6-27-T-3611 is a fixed-price request for the procurement of one Angle Indicator, identified by NSN 6320-01-239-5700 and Northrop Grumman Systems Corporation part number 1976469. Issued by the DLA Weapons Support ASC Commodities Division, the requirement specifies a delivery timeline of 20 days after order with a required delivery date of October 1, 2026. The item is to be delivered FOB Destination to the USS PATRIOT MCM 7. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract mandates strict adherence to quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with a specific requirement for fragile marking and a total prohibition of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the offeror must comply with the Buy American Act and Berry Amendment restrictions, provide safeguarding for covered defense information per DFARS 252.204-7012, and ensure all hazardous materials are labeled according to the Hazard Communication Standard.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Marine Technical Maintenance & Class SurveysThe Marine Technical Maintenance and Class Surveys subcontract, issued by the Department of Defense through Mschq Norfolk, involves providing specialized maintenance and survey services for Military Sealift Command vessel charters. The scope of work includes the upkeep of hull, deck plating, superstructure, divisional bulkheads, ground tackle, and firefighting equipment utilizing marine engineering and welding tools. Additionally, the contractor is responsible for coordinating and delivering certified ABS/IACS Class survey reports to ensure overall vessel readiness. This opportunity is categorized under NAICS code 336611 and will be performed in Japan. The solicitation was posted on October 21, 2026, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Maritime Systems Integration & ModificationThe Maritime Systems Integration and Modification subcontract involves performing temporary and reversible modifications to vessels supporting prime contractors for the Department of Defense under the U.S. Army ACC-APG-Orlando. The scope of work includes installing mission-specific hardware and integrating government-furnished autonomous systems, followed by the full restoration of the vessels to their original commercial state. These operations will be performed in Norfolk and require specialized tools for structural and electrical modifications, as well as engineering certifications to ensure maritime stability. The primary deliverables for this engagement are a mission-configured vessel for the duration of the event and a fully restored vessel upon completion. This project falls under NAICS code 336611 and is managed by the W6QK Acc-Apg-Orlando agency. Interested parties should note the response deadline of November 7, 2026.

W6QK Acc-Apg-Orlando

POSTED

DEADLINE

Marine Vessel Maintenance and RepairThis subcontract for Marine Vessel Maintenance and Repair supports prime contractors on projects for the Navsup Flt Logistics Ctr Norfolk. The scope of work involves performing routine and emergency maintenance, including preventative care for engines and hulls, safety equipment inspections, and marine HVAC services to ensure vessels remain available year-round. The ultimate goal is the delivery of certified seaworthy vessels. Performance will take place in Virginia Beach and requires the use of USCG-certified marine technicians. All work must be conducted in strict compliance with the Passenger Vessel Safety Act of 1993. The opportunity was posted on October 21, 2026, with a response deadline of November 4, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C21

Same awarding agency

Interior Marine Flooring SpecialistThis subcontract opportunity, titled Interior Marine Flooring Specialist, involves the removal and replacement of interior deck coverings for prime contractors working on USCG vessel projects. The scope of work specifically includes the renewal of interior deck covering systems and jointer decks to deliver fully installed interior flooring. The project is managed under the Department of Homeland Security for agency CG-SEA-C21 and will be performed in Santa Barbara, California. Interested parties must respond by November 16, 2026, for this requirement categorized under NAICS code 238330.

Flooring Contractors

POSTED

about 5 hours ago

DEADLINE

Marine Hardware & Specialty FabricationsThis subcontract for Marine Hardware and Specialty Fabrications supports prime contractors on USCG vessel projects under the Department of Homeland Security. The scope of work involves the supply and installation of specialized marine hardware and closures, specifically focusing on the renewal of Capastic fairing and depth sounders, the assessment of watertight closures, and the maintenance of stern launch doors. Additionally, the contractor is responsible for renewing cathodic protection and zinc anodes. The project is managed by agency CG-SEA-C21 and will be performed in Santa Barbara, California. Interested parties must adhere to the response deadline of November 16, 2026. The contract falls under NAICS code 332312, ensuring the delivery of fully installed hardware and renewed anodes to maintain vessel integrity and performance.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

Marine Plumbing & Piping (Sea Water Systems)This subcontract opportunity involves providing specialized marine plumbing and piping services for sea water and fluid systems on USCG vessel projects. The selected contractor will work under prime contractors to execute general maintenance and repairs, ensuring that all sea water systems are fully maintained and leak-free. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work will be performed in Santa Barbara, California. The project falls under NAICS code 238220, with a response deadline set for November 16, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

HVAC & Ventilation ServicesThis subcontract for HVAC and Ventilation Services involves the cleaning and maintenance of shipboard air handling and ventilation systems for prime contractors working on USCG vessel projects. The scope of work specifically includes the cleaning and inspection of HVAC system ducting as well as Engine Room supply and exhaust fan assemblies to ensure the delivery of fully operational systems. The project is managed under the Department of Homeland Security via agency CG-SEA-C21 and is categorized under NAICS code 238220. Performance of the services will take place in Santa Barbara, California. Interested parties must submit their responses by the deadline of November 16, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

Marine Electrical & Systems TestingThis subcontract for Marine Electrical and Systems Testing supports prime contractors on USCG vessel projects under the Department of Homeland Security. The scope of work involves performing diagnostic testing and renewal of electrical distribution and navigation systems, specifically focusing on thermographic inspections of Electrical Power Distribution Systems and the renewal of Speed Log skin valves and Fathometer Transducers. The contractor is responsible for delivering detailed thermographic reports and the successful installation of all renewed components. The project is categorized under NAICS code 238210 and will be performed in Santa Barbara, California. Interested parties must adhere to the response deadline of November 16, 2026, for this opportunity managed by the CG-SEA-C21 agency.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 5 hours ago

DEADLINE

Marine Tank & Piping Cleaning ServicesThis subcontract opportunity, titled Marine Tank and Piping Cleaning Services, involves providing specialized industrial cleaning and inspection services for hazardous and waste tanks on USCG vessel projects. The scope of work includes the cleaning and inspection of sewage holding, grey water, oily water, dirty oil, and MP fuel service tanks, as well as the flushing of associated sewage and grey water piping. The primary objective is to deliver fully cleaned, inspected, and certified tanks and piping to prime contractors. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The project falls under NAICS code 562910. Interested parties must submit their responses by the deadline of November 16, 2026.

Remediation Services

POSTED

about 5 hours ago

DEADLINE

Marine Coating & Preservation ServicesThe Marine Coating and Preservation Services subcontract involves providing specialized surface preparation and the application of protective coatings for prime contractors working on USCG vessel projects. The scope of work focuses on the preservation of critical areas, including the underwater body, hull plating freeboard, exterior main decks, superstructure, masts, and stern tube interior surfaces, ensuring all deliverables meet strict USCG specifications. Managed by the Department of Homeland Security under agency CG-SEA-C21, the project will be performed in Santa Barbara, California. The solicitation was posted on October 22, 2026, with a response deadline of November 16, 2026. This opportunity falls under NAICS code 238130.

Framing Contractors

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Fuel Tank Visual Inspection and Systems CertificationThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves providing detailed visual inspections and systems certification for fuel tanks on vessel projects in Corpus Christi, Texas. The selected contractor will be responsible for verifying the structural integrity of bulkheads, floor, and overhead plating, as well as ensuring the proper seating of gaskets. Additionally, the scope includes testing vent check valves and tank level indicators, which must be performed in the presence of a Coast Guard Inspector. To ensure compliance and quality, the contractor is required to implement a formal Quality Control Program. The primary deliverables for this engagement consist of comprehensive structural inspection reports and official operational certifications. Interested parties must respond by October 27, 2026, under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Diesel Fuel Tank Cleaning and Hazardous Waste DisposalThis subcontract, issued by the Department of Homeland Security for the U.S. Coast Guard, involves the removal of contaminated diesel fuel and the deep cleaning of interior tank surfaces for vessel projects in Corpus Christi, Texas. The scope of work includes the extraction of 1,400 gallons of contaminated fuel from two service tanks, the removal of sludge, rust, sediment, and biological growth, and the installation of SAE AMS C6183 compliant gaskets. The selected contractor is responsible for providing legal disposal of all hazardous waste along with comprehensive chain of custody and certified disposal records. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910, with a response deadline of October 27, 2026.

Remediation Services

POSTED

DEADLINE

CGC MANTA – FUEL TANK CLEANING

Solicitation # 52000QR270000177

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for the cleaning and inspection of two 1,450-gallon diesel fuel service tanks aboard the CGC Manta, located in Corpus Christi, Texas. This total small business set-aside is being processed under FAR Part 12 and FAR 13 using simplified acquisition procedures. The selected contractor will be awarded a firm-fixed price purchase order based on the best value to the government. The required period of performance is from November 1 to November 30, 2026, with the actual work duration not to exceed five days from the date of award. The scope of work includes the removal and legal disposal of 1,400 gallons of contaminated diesel fuel, cleaning interior tank surfaces of all sediment and biological growth, and performing detailed visual inspections of structural conditions and coatings. Key requirements include the use of SAE AMS C6183 compliant gaskets, the maintenance of a detailed plug log, and the provision of a complete chain of custody record for all waste. Contractors must demonstrate the satisfactory operation of tank level indicators and vent check valves in the presence of a Coast Guard Inspector. Interested vendors must be registered in SAM.gov and submit a detailed cost breakdown, including unit and total pricing, by October 27, 2026, at 1 PM EST.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS