Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Steel Fabrication & Structural Repair

Active

Federal

Response Deadline11/09/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract, managed by the Department of Homeland Security for the CG-SEA-C21 agency, involves marine steel fabrication and structural repair for USCG vessel projects in Jacksonville. The scope of work focuses on the removal and renewal of damaged hull and structural steel plating, specifically utilizing plates weighing 10.2 lbs, 12.75 lbs, and 15.3 lbs. Additionally, the contractor is responsible for repairing bulwarks and pusher knees, ensuring all welding and brazing activities comply with SFLC Std Spec 0740. To ensure quality and safety, all personnel performing welding must be certified according to SFLC Std Spec 0740 and NAVSEA TP 1688 standards. The final deliverable consists of fully installed and welded steel plating. Interested parties must submit their responses by November 9, 2026, under NAICS code 336612.

General Info

DHS subcontract for USCG vessel marine steel fabrication and structural repair in Jacksonville.

Agency

Department Of Homeland Security → CG-SEA-C21

NAICS

336612 - Boat Building

Place of Performance

Jacksonville, FL, 32226, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0127QPBPL0001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC HAMMER (WLIC 75302) USCG 68A BARGE (68014) DRYDOCK REPAIRS FY2027

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 04:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C21

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C21

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Removes and renews damaged hull and structural steel plating for prime contractors on USCG vessel projects. Renews steel plates (10.2 lbs, 12.75 lbs, 15.3 lbs), repairs pusher knees and bulwarks, and performs welding and brazing per SFLC Std Spec 0740. Requires certified welders per SFLC Std Spec 0740 and NAVSEA TP 1688. Delivers installed and welded steel plating.

Similar Contracts

Same NAICS industry code

20--HATCH,MARINE, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RDB49

Solicitation N0010426RDB49 is a firm-fixed-price request for proposal issued by NAVSUP Weapon Systems Support Mechanicsburg for the repair of Marine Hatches. The government is seeking a Repair Turnaround Time (RTAT) of 100 days, and this metric will be used as a factor in the source selection evaluation. All freight is FOB Origin and handled by the Navy per the Commercial Asset Visibility Statement of Work. Government Source Inspection is required, and all repaired items must be physically identified according to MIL-STD-130 and meet IPC J-STD-001 Class 3 soldering requirements where applicable. The award will be made to a single responsible offeror determined to be most advantageous, with past performance weighted as more important than price. Offerors must provide firm pricing that includes all costs associated with the receipt and complete repair of materials, including those in unwhole or damaged condition. Failure to meet the required RTAT will result in a price reduction per unit per month, to be implemented via a reconciliation modification. Packaging must comply with MIL-STD-2073, and all payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 1 hour ago

DEADLINE

SHOE SET,COUNTER CL

Solicitation # SPRMM127QMA05

SPRMM1 DLA Mechanicsburg

POSTED

about 1 hour ago

DEADLINE

in about 1 month

VDOT Approved Aggregate Supplier & HaulerThis subcontract opportunity is for a qualified supplier and hauler to provide various types of VDOT-approved aggregate for prime contractors operating within the Petersburg Residency of the Virginia Department of Transportation's Richmond District. The selected vendor will be responsible for the procurement, transportation, and delivery of materials F.O.B. destination to six Area Headquarters, including Jennings Ordinary, where they must off-load the aggregate into neat stockpiles. To be eligible, contractors must hold VDOT Approved List #5 certification and ensure all materials and processes comply with Section 109 of the 2020 Road and Bridge Specifications. Interested parties must submit their responses by November 5, 2026, to support infrastructure projects managed by the Virginia Department of Transportation.

Virginia Department of Transportation

POSTED

about 23 hours ago

DEADLINE

BOAT TRAILERS FOR FWS REFUGES LAW ENFORCEMENT.

Solicitation # 140FF027Q0016

Solicitation 140FF027Q0016 is a fixed-price request for the procurement of three new, unused, current production heavy-duty boat trailers for the Department of the Interior's FWS Refuges Law Enforcement. The trailers, which can be Amera Trail or an equivalent, are specifically configured for Yellowfin 24 Bay vessels and will be used for manatee zone enforcement in Florida. Technical specifications require an aluminum corrosion-resistant frame with stainless steel hardware, a 6,800 lb GVWR, tandem axles with 3,500 lb capacity each, electric over hydraulic brakes, and LED lighting. The contract is a total small business set-aside under NAICS code 336612. To be eligible for award, sellers must be manufacturers or federally authorized distributors capable of delivering the entire order within 90 days of the award date. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and other factors. All quotes must be submitted as a single consolidated PDF not exceeding 15 pages, with the total price including all shipping and handling costs. Payment will be processed electronically via the U.S. Department of the Treasury's Invoice Processing Platform. Final acceptance will occur upon delivery at the designated agency location following a successful inspection to verify that all federal, state, and manufacturer safety standards have been met.

Fws Contracting Activity

POSTED

DEADLINE

Piping & Expansion Joint SupplyThis subcontract involves the supply of industrial piping and flexible expansion joints specifically designed for high-pressure marine environments to support Department of National Defence Victoria-Class submarine projects. The supplier is responsible for providing new piping components, including those from manufacturers such as Oldham Seals Limited, ensuring all materials strictly conform to the most current applicable drawings and part numbers. The contract is managed under NAICS code 336612 for the Government of Canada, with performance locations situated in British Columbia and Nova Scotia. Deliveries of the required components are to be made on an FCA basis. Interested parties must adhere to the response deadline of November 20, 2026.

Department of National Defence

POSTED

DEADLINE

in about 1 month

Public Safety and Emergency Services - Request for Quotes - PSD FWES River Jet Boat

Solicitation # AB-2026-06971

Public Safety and Emergency Services, specifically the Fish and Wildlife Enforcement Services, is seeking quotes for the procurement of one river jet boat. This solicitation, identified by number AB-2026-06971, is intended for performance within the province of Alberta. The request for quotes was posted on October 19, 2026, and requires a response by the deadline of October 29, 2026. Interested parties should direct inquiries to the primary procurement officer, Stephen Katabula, via the provided agency email address.

Public Safety and Emergency Services

POSTED

DEADLINE

Supply of Marine Navigational Lights (NSN 6220-00-050-6743)This subcontract opportunity is for the supply of specialized marine navigational lights, specifically NSN 6220-00-050-6743, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, through the DLA Weapons Support ASC Commodities Division, requires that all lights be manufactured or procured in strict accordance with TDP Rev A Gen 1 and reference specification MIL-DTL-24560A SUP 1, Revision A. Delivery terms are established as F.O.B. Origin. Eligible bidders must hold a valid CAGE code and maintain ISO 9001:2015 certification. This procurement is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336612. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL FLOOR SECTION, WA

Solicitation # SPE7M4-27-T-0601

Solicitation SPE7M4-27-T-0601 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 27 units of watercraft panel floor sections, identified by NSN 2040016575748 and part number 1630018. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a delivery timeline of 403 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and environmental standards, including the prohibition of intentionally added mercury and Class I ozone-depleting substances. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Quotes must be submitted via the DLA Internet Bid Board System by December 31, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

LASHING GEAR, DECK

Solicitation # SPE7M4-26-T-453Q

Solicitation SPE7M4-26-T-453Q is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 90 units of Deck Lashing Gear (NSN 2020-00-789-1065). This is designated as a critical application item that must be manufactured via a forging process in accordance with Technical Data Package Rev A Gen 1 and basic drawing 53711 1313817 Revision C. The required delivery date is December 1, 2027, with shipment to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to environmental and safety standards, specifically prohibiting the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129, with a general requirement to avoid plastics for wrapping and cushioning. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with DFARS 252.204-7012 for cybersecurity. The solicitation is open to full and open competition, with a price evaluation preference available for certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Shafting and Rudder MaintenanceThis subcontract for Shafting and Rudder Maintenance involves providing specialized inspection and repacking services for rudder and propeller shafts on behalf of prime contractors for the Massachusetts Maritime Academy. The scope of work includes repacking rudder shafts using 3/4-inch Chesterton packing, replacing the starboard side shaft seal with a Duramax DXU4000A, and conducting thorough inspections of the cutlass bearings. The contractor is required to deliver the repacked shafts, the newly installed seal, and a detailed written condition report. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must note that the response deadline for this opportunity is November 3, 2026. The contract falls under NAICS code 336612 and is managed through the Massachusetts Maritime Academy.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Cathodic Protection (Zinc Anodes)This subcontract for the Massachusetts Maritime Academy involves the supply and installation of a cathodic protection system to prevent hull corrosion. The scope of work requires the removal and replacement of up to 34 bolt-on zinc anodes measuring 1-1/4 by 6 by 12 inches, as well as one half-zinc located at the sea chest. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must submit their responses by November 3, 2026, in accordance with the solicitation posted on October 19, 2026.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Shipyard Haul-out and Docking ServicesThe Shipyard Haul-out and Docking Services subcontract involves the physical haul-out, blocking, shoring, and relaunching of the TV Ranger for prime contractors supporting Massachusetts Maritime Academy projects. The selected provider must utilize a dry dock or marine hoist facility capable of safely positioning the vessel for necessary repairs and ensuring its secure return to the water. Performance of these services will take place at Academy Drive in Buzzards Bay, Massachusetts. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. This opportunity falls under NAICS code 336612.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C21

Same awarding agency

Industrial Tenting & Protective WrappingThis subcontract opportunity, titled Industrial Tenting and Protective Wrapping, is issued by the Department of Homeland Security under agency CG-SEA-C21. The project focuses on providing environmental containment and equipment protection for prime contractors working on USCG vessel projects in Jacksonville, Florida. Key deliverables include the installation of containment tents for blast and paint operations, as well as the shrink-wrapping of buoy and cargo handling cranes and boat davit winches. The contract is designated as a Total Small Business Set Aside under NAICS code 238990. Interested parties must submit their responses by the deadline of November 9, 2026, at 4:00 PM. The scope of work ensures that critical vessel equipment remains protected and that hazardous operations are properly contained during the maintenance process.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Marine Equipment Maintenance (Spud Winches)This subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C21, involves the inspection, servicing, and renewal of spud winches for prime contractors working on USCG vessel projects. The scope of work includes performing detailed inspections and maintenance on barge spud winches, executing full system renewals when necessary, and delivering the completed winch systems. The project is designated as a total Small Business Set Aside under NAICS code 811310, with the place of performance located in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 9, 2026, following the posting date of October 20, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Environmental Remediation (Lead & Asbestos)This subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C21, involves providing environmental remediation services for USCG vessel projects in Jacksonville, Florida. The selected contractor will perform spot abatement of hazardous materials, specifically focusing on the removal and disposal of asbestos-containing materials and lead-based paint. To be eligible, contractors must possess the necessary certifications for handling and disposing of hazardous materials and are responsible for delivering a clean site along with final abatement certification. The project is designated as a total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 9, 2026, at 4:00 PM. This role functions as a subcontractor supporting prime contractors to ensure all hazardous materials are mitigated according to safety and environmental standards.

Remediation Services

POSTED

DEADLINE

Specialized Inspection Services (NACE Level 3)This subcontract opportunity, issued by the Department of Homeland Security under agency CG-SEA-C21, seeks a qualified provider to deliver specialized inspection services for USCG vessel projects. The selected contractor will provide independent third-party verification of surface preparation and coating application to ensure proper corrosion control for prime contractors. A critical requirement for this engagement is that personnel must hold NACE Level 3 Certification to deliver the necessary independent inspection reports. The project is designated as a total Small Business Set Aside under NAICS code 541380 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 9, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Marine Door Fabrication & InstallationThis subcontract opportunity involves the fabrication and installation of vessel doors for prime contractors working on USCG projects under the Department of Homeland Security. The scope of work includes the replacement of Fiddley, Passageway, and Galley doors, as well as the reinstallation of Crew Head doors, with the final requirement being the delivery of fully functional, watertight installations. The project is designated as a total Small Business Set Aside under NAICS code 332322 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by November 9, 2026, for this requirement managed by the CG-SEA-C21 agency.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Marine Piping & Mechanical SystemsThis subcontract opportunity, titled Marine Piping and Mechanical Systems, involves the renewal and repair of engine coolant and exhaust piping systems for prime contractors on USCG vessel projects. The scope of work specifically includes renewing Detroit Diesel Model 3-71 engine cooling piping and barge engine exhaust piping, as well as overhauling sea valves and water pieces using marine-grade piping and gaskets to ensure fully functional systems. Managed by the Department of Homeland Security under agency CG-SEA-C21, the project will be performed in Jacksonville, Florida. This is a total Small Business Set Aside under NAICS code 238220. The solicitation was posted on October 20, 2026, with a response deadline of November 9, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Marine Preservation & Industrial CoatingThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, involves providing marine preservation and industrial coating services for USCG vessel projects in Jacksonville, Florida. The scope of work includes surface preparation and the application of protective coatings, specifically executing full or partial preservation of hull plating. Technical requirements include power tool cleaning to bare metal according to SSPC-SP11 standards and the application of marine-grade primers, topcoats, and ASTM D1330 rubber sheet gaskets. To ensure quality control, the contractor must utilize QP-1/AMPP certified inspectors and provide completed QA-5 data forms upon delivery of the preserved hull surfaces. Interested parties must respond by November 9, 2026, for this project categorized under NAICS code 238320.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Hull Ultrasonic Testing & Side Scan InspectionThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, involves performing specialized thickness measurements of underwater hull plating for USCG vessel projects in Jacksonville. The contractor will utilize ultrasonic side scan equipment with a 0.5 inch by 0.5 inch resolution to automate the scanning process and accurately identify areas of pitting and wastage. Key deliverables include the provision of detailed thickness measurement reports and highlighted maps indicating specific repair areas. To ensure quality control and transparency, the contractor is required to provide daily updates to the Contracting Officer's Representative and conduct onsite reviews of all readings.

Testing Laboratories and Services

POSTED

DEADLINE

Heavy Equipment Core Return Logistics (Newport, RI)This subcontract opportunity, managed by the Department of Homeland Security for the US Coast Guard, involves specialized transport and freight coordination for heavy engine core components in Newport, Rhode Island. The selected contractor will be responsible for coordinating the pickup and hauling of critical parts, such as crankshafts and water pumps, from the pier to a designated vendor facility for inspection. To qualify, providers must possess freight vehicles capable of transporting heavy equipment and maintain the necessary port security access. This is a total small business set-aside under NAICS code 484220, with a response deadline of October 28, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

OEM Caterpillar D-398 Engine Overhaul Kit SupplierThis subcontract opportunity is for the procurement and delivery of brand-new OEM overhaul kits for Caterpillar D-398 engines, supporting prime contractors on US Coast Guard vessel projects. The scope of work includes the sourcing and kitting of essential OEM components such as crankshafts, water pumps, gaskets, lock brackets, primers, bolts, and cap screws. All materials must be delivered as a complete, verified kit to Newport, Rhode Island. To be eligible for this award, suppliers must maintain active status as a Caterpillar Authorized Parts and Service Center and provide a valid Letter of Authorization. This is a total small business set-aside under NAICS code 423840, managed by the Department of Homeland Security for agency CG-SEA-C21. Responses are due by October 28, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

CGC MANTA – FUEL TANK CLEANING

Solicitation # 52000QR270000177

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

USCGC HAMMER (WLIC 75302) USCG 68A BARGE (68014) DRYDOCK REPAIRS FY2027

Solicitation # 70ZU0127QPBPL0001

Solicitation 70ZU0127QPBPL0001 is a Request for Quotations issued by the Department of Homeland Security, Coast Guard, for the Fiscal Year 2027 drydock repairs of the USCGC HAMMER (WLIC 75302) and the USCG 68A Barge (68014). This is a Total Small Business Set-Aside under a Firm Fixed Price contract with a proposed period of performance from January 6, 2027, to March 17, 2027, contingent upon Congressional Appropriation. The contractor must provide a facility accessible from a navigable waterway in Jacksonville, Florida, capable of supporting the safe arrival and departure of the vessels. The scope of work encompasses comprehensive maintenance, preservation, and repair services, including hull plating renewal, ultrasonic side scan testing, propulsion shafting overhaul, tank preservation, and the renewal of sea valves and strainers. Specific requirements include the provision of an independent Level 3 NACE Inspector and adherence to SFLC Standard Specifications for welding, drydocking, and preservation. Award will be based on the most advantageous offer, evaluating technical capability, project planning, experience with DoD and USCG surface vessels, and price. Quotations are due by November 9, 2026, and must include a cover letter, price schedule, and documentation of past performance and technical capability.

Ship Building and Repairing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS