Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on November 15, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Market Survey for Procurement and Support Services for the Satellite Communications Modem, MD-1366/U and MD-1366A/U

Closed
PANAPG-19-P-0000-003830Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418
New
NRP,PRINTE DBRD ASS — 5998016636129 — N0038327QSA01
Solicitation # N0038327QSA01
Solicitation N00383-27-Q-SA01, issued by NAVSUP Weapon Systems Support, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of eight NRP Printed Board Assemblies (NSN 5998-01-663-6129, Part Number 8430022-502). The primary objective is to return these units to a Ready for Issue (RFI) condition within a 90-day delivery period. The work is to be performed at the CAES Systems LLC facility in Lansdale, Pennsylvania, and will be issued as a delivery order under BOA N00383-25-G-NP01. The contractor is responsible for providing all necessary labor, materials, and tooling, with strict prohibitions against part cannibalization unless specifically approved. The contract mandates adherence to ISO 9001 or SAE AS9100 quality systems and ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. Key administrative requirements include mandatory reporting via the Commercial Asset Visibility Repairables Portal and strict packaging compliance with MIL-STD-2073 and MIL-STD-129. The government will award the contract to a single responsible offeror based on a best-value determination, prioritizing past performance over price. Special provisions are included for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from DCMA and the Procuring Contracting Officer.
Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

in 10 days

General Info

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Aberdeen Proving Ground, ABERDEEN PROVING GROUND, MD, 21005, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg
Contacts2 people available
OfficeABERDEEN PROVING GROU, MD, 21005-1846, USA
Office AddressABERDEEN PROVING GROU, MD, 21005-1846, USA
Contacts

Full Description

Show more
Market Survey for Procurement and Support Services for the Satellite Communications Modem, MD-1366/U and MD-1366A/U. This is a market survey that is required by the Federal Acquisition Regulation to locate prospective sources that shall provide the following services: Manufacture, maintain and enhance hardware and software as well as other services, for the Communications Modem, MD-1366/U (NSN 5895-01-519-2525) and MD-1366A/U (NSN 5895-01-519-2415) Enhanced Bandwidth Efficient Modem (EBEM). Description/Requirements The Government intends to eventually award a 5-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract for depot level repair services, maintenance support, engineering services, and software support services for the MD-1366/U (NSN 5895-01-519-2525) and MD-1366A/U NSN 5895-01-519-2415) Enhanced Bandwidth Efficient Modem (EBEM). The EBEM is a multi-input/multi-output single channel per carrier satellite modem that converts multiple baseband digital input signals into multiple waveform intermediate frequencies. The EBEM is intended for use with Department of Defense and commercial satellite systems. The EBEM features legacy modem compatibility and includes antenna handover and can automatically adapt to changing transmission link conditions. It can be used in fixed and mobile applications. The contractor will be tasked to accomplish this entire effort and must possess in-depth expertise and experience in the satellite communications domain, possess thorough knowledge of the EBEM, EBEM software architecture and code in order to manufacture, repair, modify and enhance the EBEM. This is a commercial item so technical data is not available. The contractor must demonstrate the ability to accomplish all tasks that satisfies all Government requirements within specified time constraints (i.e., repair and return EBEM within 30 calendar days, etc.). The contractor shall provide the following services (this is not an all-inclusive listing): Manufacture EBEM hardware and system software. Repair EBEM hardware. Repair, and perform routine maintenance of system software Hardware and software configuration management Software and hardware enhancements Production Qualification Testing Formal Qualification Testing Post Production Software Support Tier 3 software support Technical manual revisions System document revisions Responses are limited to satellite communications experience. Provide Cage Code and DUNN's number. Company must be registered with the System for Award Management (SAM). Please submit all responses in writing, to include a detailed description of contractor qualifications and experience no later than close-of-business 23 November 2018. Interested sources shall furnish the following information in the format provided below: 1. Name and address of company. 2. Point of Contact (Name, address, phone number and e-mail) 3. Identify past and current services your company offers that exactly match the capabilities specified. 4. Address your company s capability to act as a single provider for the services defined herein. DISCLAIMER: This Sources Sought (SS) Notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of the Government. The purpose of this SS is to identify potential sources that are capable of providing a single solution for the required services described herein. The Government does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted or for Governmental use of such information. Acknowledgement of receipt of responses will not be made, nor will respondents be notified of the Governments evaluation of the information received. FOR INFORMATION PLEASE CONTACT: Ira Weiner, 443-395-1234, ira.r.weiner.civ@mail.mil

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

NAICS: 541519
New
Federal
Cyber Security Engineering and Risk Management Framework Support
Solicitation # W91CRB-26-B-A006
Solicitation W91CRB-26-B-A006 is a firm-fixed-price requirement for Cybersecurity Engineering and DoD Risk Management Framework (RMF) Support Services at the Aberdeen Test Center in Maryland. The contractor will provide all necessary personnel, equipment, and non-personal services to establish and maintain Authority to Operate (ATO) and RMF compliance for the ATC Local Area Network, Logically Isolated Network, Secure Test Environment, and Test and Evaluation Network. The scope includes RMF lifecycle activities, engineering and configuration support, and incident management, adhering to DoD RMF standards for Secret systems and Intelligence Community Directive 503 for Top Secret requirements. The contract spans a five-year period of performance from November 23, 2026, to November 22, 2031, consisting of a base year and four option years. This is a small business set-aside with a preference for HUBZone concerns. Award will be made to the lowest-priced, responsive, and responsible bidder based on a Total Evaluated Price calculation. Key personnel requirements include a Senior IT Solutions Architect with CISSP certification and 10 years of experience, as well as other IT professionals with CASP+ or equivalent certifications. Security requirements are stringent, requiring a Secret Facility Security Clearance at the time of bid, with specific personnel requiring Top Secret clearances for surge support.
Other Computer Related Services

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541611
New
Federal
FY27 Mentor Protege Program (MPP) Broad Agency Announcement
Solicitation # MPP-FY2027
The Department of War Mentor-Protégé Program (MPP) is a business development initiative designed to strengthen the Defense Industrial Base by pairing large prime contractors with eligible small businesses. Mentors must be prime contractors with at least 25 million dollars in Department of War contracts from the previous fiscal year and an active subcontracting plan. Eligible protégés include small businesses meeting SBA size standards and specific socio-economic categories, such as HUBZone, Women-Owned, or Service-Disabled Veteran-Owned firms. The program focuses on technical priorities including IT infrastructure modernization, cloud optimization, data integration, AI/ML implementation, and cybersecurity. The application process is a two-phase submission. Phase one requires a white paper summarizing technical and cost information, which are reviewed on a quarterly rolling basis. Selected applicants proceed to phase two to submit a final proposal, including a statement of work and cost proposal. Agreements are limited to reimbursable contracts with a maximum period of performance of 36 months. Additionally, the Protégé Pilot Initiative allows protégés to propose specific engineering or software projects for up to 25 percent of the annual agreement budget. All participants must maintain active registration in SAM.gov.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 9 months
View Details
NAICS: 541715
New
Federal
Request for Information – Prophylactic Platform for Medical Countermeasures
Solicitation # W911SR27SPPFC
The Department of Defense, through the Portfolio Management Executive for Chemical, Biological, Radiological and Nuclear Defense (PME CBRND) and the Accelerated Defense Pharmaceuticals (ADP) program, is issuing a Request for Information (RFI) under solicitation W911SR27SPPFC. The objective is to identify capable companies that can advance the development of prophylactic medical countermeasures (MCMs) using existing platform technologies. The program focuses on progressing these countermeasures through Phase I or Phase II clinical trials, with a goal of enabling interim fielding via Expanded Access Protocols or pre-Emergency Use Authorization. The anticipated period of performance is up to four years, with work primarily conducted at the contractor's facilities. Interested respondents must provide a comprehensive capability description, including technical approach, regulatory status with the FDA, cGMP manufacturing capabilities, and a development roadmap with rough order of magnitude cost estimates. Evaluation criteria for future selections will emphasize manufacturing process capability, product safety and efficacy, past FDA experience, and the plug-and-play nature of the platform across various pathogens. Submissions must be delivered as a single searchable PDF, featuring a specific cover page and a core capability description not exceeding four pages. All non-clinical and clinical data must be SEND and CDISC compliant, and manufacturing must adhere to cGMP standards to support an Investigational New Drug application through a Biologics License Application.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
Federal
Sizing Technology Pilot
Solicitation # HQDA-G-4_26_01
The Army Contracting Command-Aberdeen Proving Ground, acting for the Headquarters Department of the Army G-4, is seeking innovative commercial solutions for a Sizing Technology Pilot. The objective is to replace manual tape measurements with automated, non-contact methods such as body and foot scanning, computer vision, and AI-driven extraction to accurately determine standard Army uniform and footwear sizes. This initiative targets four primary pipelines: Initial Entry Training Soldiers at MEPS, West Point Cadets, Senior ROTC Cadets at civilian institutions, and in-service Soldiers preparing for deployment. The goal is to eliminate logistical bottlenecks and reduce high return rates of clothing and boots. Issued under the Defense Commercial Solutions Opening authority, this solicitation may result in FAR contracts, non-FAR agreements, or Other Transactions, with the government anticipating up to three small pilot contracts. Interested offerors must submit a Phase 1 Solution Brief by October 20, 2026, which will be evaluated based on technical merit, project schedule, and commercial viability. Key requirements include the ability to integrate with Army Vantage / ISM, strict compliance with Section 508 accessibility standards, and adherence to the Privacy Act. Additionally, the government requires 100 percent ownership of all captured measurement and sizing data. Eligible respondents must possess a Unique Entity ID and active SAM registration.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS