Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Marking, Labeling, and Barcoding

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of physical markings in strict accordance with MIL-STD-129, specifically incorporating RQ017 for bare item identification, RQ011 for the removal of existing government markings, and the placement of 2D Data Matrix barcodes on all items. Although item unique identification IUID is typically required under defense contracting standards, this contract includes a DFARS waiver that explicitly exempts the need for IUID labeling, streamlining the marking process to focus solely on the specified MIL-STD-129 requirements. The work must be performed to ensure full compliance with these standards to meet government specifications for traceability and logistics handling. This subcontract, issued under the NAICS code 561990, is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026. The place of performance and specific office address information are not provided, and there is no designated point of contact listed. The contract details are accessible through the DIBBS portal via the provided link, and the nature of the work suggests it pertains to packaging, labeling, and logistics support services for government assets under a non-set-aside subcontracting arrangement.

General Info

Apply MIL-STD-129 markings with RQ017, RQ011, and 2D barcodes; IUID waived per DFARS.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

561990 - All Other Support ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Apply physical markings per MIL-STD-129 including RQ017 (bare item ID), RQ011 (removal of government markings), and 2D Data Matrix barcodes; IUID not required due to DFARS waiver.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

New
DIBBS
STUFFING TUBE
Solicitation # SPE4A7-26-Q-0919
The contract specifies the procurement of a stuffing tube identified by NSN 5975-01-722-0867 and part number 630A007MT203D, with a firm fixed price and no variance allowed in quantity—exactly one unit is required. Delivery is due 155 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging per RP001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified using specified levels or AQLs. Packaging must comply with MIL-STD-129 labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under FED-STD-313, with DLA requirements taking precedence. Palletization must adhere to RP001 and commercial packaging standards. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated government freight address in Port Hueneme, California, with shipment details including RDD 777 and TCN N4242052261530. The government use section includes internal tracking codes, and the required delivery date is May 22, 2026.

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
CONTROL ASSEMBLY, PU
Solicitation # SPE4A7-26-Q-0929
The contract pertains to the procurement of seven units of a cable push-pull engine speed control assembly identified by NSN 2995-01-129-3917, with a delivery requirement within 200 days after award. The solicitation, numbered SPE4A7-26-Q-0929, was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the version in effect on the solicitation issue date. The item is subject to strict export control under either ITAR or EAR, prohibiting any transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including disclosures to foreign national employees within the United States. Access to this controlled data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandatory training on handling export-controlled technical data, and have submitted the required DLA questionnaire. Packaging must adhere to DLA procurement standards, and the contracting organization emphasizes cybersecurity compliance through CMMC Level 2 certification for third-party assessors. The primary point of contact for inquiries is Rekisha Burton, reachable via phone or email provided in the contract data.

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
STUFFING TUBE
Solicitation # SPE4A7-26-Q-0932
The contract specifies the procurement of 10 stuffing tubes with NSN 5975-99-676-3468 under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required 145 days after award date, with inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E using preservation method 10, dry preservation, and unit container D3, and marked according to MIL-STD-129 without special marking codes. Packaging and preservation are subject to DLA’s RP001 requirements and explicitly prohibit mercury or mercury compounds. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and all packaging, marking, and preservation instructions must align with these standards. Transportation directions specify delivery to USNS EARL WARREN via parcel post and freight shipping addresses, with shipping details governed by DLAD PROC NOTES C19 and C20. The vendor must use VSM for U.S. shipments and comply with the provided TCN, RDD, project, and signature codes. The government’s material need date is July 17, 2026, and the contract solicitation number is SPE4A7-26-Q-0932.

POSTED

about 8 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SPECIAL SHAPED
Solicitation # SPE4A7-26-T-599N
The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
MARKER STRIP, TERMIN
Solicitation # SPE4A7-26-T-599P
The contract pertains to the procurement of 12 units of a marker strip for terminal boards with NSN 5940-01-531-7249, issued under solicitation SPE4A7-26-T-599P by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and requires delivery within 171 days after order. Compliance is governed by DLA Packaging Requirements for Procurement and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Manufacturer inspection methods may be chosen at their discretion unless contractually directed. The item must conform to technical data specified in A3278582-004 and is to be delivered to New Cumberland, PA, with Lockheed Martin as the CAGE code 80063 performer. All government identification must be removed from non-accepted supplies, and primary point of contact is Lexus Henry, reachable via email and phone provided.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-Q-0924
The contract is for four aircraft stiffeners identified by NSN 1560-01-467-5640 under solicitation SPE4A7-26-Q-0924, with a delivery requirement of 221 days after order. The technical and quality requirements for this item are governed by specific DLA master list codes including RP001 for packaging, RQ001 for tailored quality standards for manufacturers and non-manufacturers, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ032 for export control of technical data. The technical data associated with this item is subject to export regulations under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to contractors who hold a valid U.S./Canada Joint Certification Program certification, have completed mandatory DOD export-controlled data training and the DLA questionnaire, and have received formal approval from the DLA authority. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contracting office is the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with April Reed designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
PLATE, IMAGING, RADIATIO
Solicitation # SPE4A7-26-T-599L
This contract is for the procurement of 24 units of a radiation imaging plate identified by NSN 6635-01-606-4999 under solicitation SPE4A7-26-T-599L, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item must be delivered FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containment using E5 unit containers and U pack code, with marking adhering to MIL-STD-129 and no special marking required. All materials must strictly exclude intentional addition or direct contact with mercury or mercury compounds except for exempted functional uses such as batteries, fluorescent lamps, and calibrated instruments, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with defined verification levels or AQLs. The contract is a total small business set-aside under NAICS code 334519, with the original delivery deadline set for October 15, 2026, and a need ship date of January 25, 2027. Technical and quality requirements are governed by the DLA Master List referenced in the contract, and the item must be transported in compliance with DLAD procedural notes C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334418
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-Q-0887
This contract is a blanket assembly solicitation under SPE4A7-26-Q-0887 for two units of NSN 1560-01-211-9542, with a delivery requirement of 128 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and any supplies not accepted must have government identification removed. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. The solicitation was issued on July 29, 2026, with responses due by August 8, 2026, and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with April Reed listed as the primary point of contact.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details