Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MASK, OXYGEN

Active
SPE2DS-26-T-302SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two oxygen masks designed for large canine use, each measuring 4.5 inches by 4.5 inches, with the unit of issue being each. The masks must comply with strict packaging and marking standards, including commercial packaging in sealed containers that protect against damage and shipping in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is subject to DLA packaging requirements and includes provisions for the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-302S, with a response deadline of August 10, 2026, and delivery expected within 20 days after award, under a federal procurement by the Department of Defense’s Medical Supply Chain.

General Info

Procure two 4.5-inch oxygen masks for large dogs, deliver to Hurlburt Field by August 2026, per DLA and Medical Marking Standard No. 1.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

131 HOWIE WALTERS RD BLDG 91042, HURLBURT FIELD, FL, 32544-5668, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-302S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Vernon Stevenson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MASK,OXYGEN
MASK,OXYGEN,,
MASK, OXYGEN FOR CANINE SIZE LARGE, RECOVERY 4.5IN X 4.5IN
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
SPE2DS-26-T-302S
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-691-9956 Quantity: 2 EA Purchase Request: 7017710699QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
Small Business Subcontracting ParticipationCertified small businesses are invited to participate as subcontractors in support of manufacturing, packaging, or logistics activities under a prime contract with the Defense Logistics Agency. This opportunity is aligned with NAICS code 339113 and is intended to facilitate small business involvement in defense-related supply chain operations. The prime contractor is part of the Construction & Equipment MRO SVC I program under the Department of Defense, with performance responsibilities centered at APO 96319-5014. Interested parties must submit their responses by August 14, 2026, following the posting date of August 3, 2026. Participation is structured as a subcontracting opportunity under a federal acquisition vehicle, with no specific set-aside designation stated, but open exclusively to certified small businesses seeking to support critical defense logistics functions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
Supply of Industrial Safety SpectaclesThe contract pertains to the manufacture and delivery of Wiley X model 057V7 safety spectacles, identified by part number 408 and national stock number 4240015107851, with full compliance to military packaging and marking standards. These spectacles are intended for use within defense-related operations and must meet stringent specifications to ensure durability, safety, and interoperability with existing military equipment and protocols. The requirement is issued as a subcontract under the NAICS code 339113, indicating it falls under the manufacturing of other sporting and athletic goods, with a focus on protective gear adapted for military applications. The solicitation was posted on August 3, 2026, with responses due no later than August 14, 2026. The place of performance is designated as APO 96319-5014, aligning with military logistics networks for overseas or deployed personnel. The contracting entity is the Department of Defense, under the organization titled Construction & Equipment MRO SVC I, indicating this requirement supports maintenance, repair, and overhaul operations critical to sustaining fielded equipment and personnel safety. Although no point of contact or set-aside details are provided, the nature of the solicitation and military labeling requirements suggest it is intended for qualified suppliers familiar with defense procurement processes and the unique demands of military-grade protective eyewear.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
Supply of NIOSH-Approved Air Filtering Respirator CartridgesThe contract calls for the supply and delivery of NIOSH-approved air filtering respirator cartridges with NSN 4240013422857, compliant with TC-23C-1062 standards, packaged in quantities of 60 units per package. All products must adhere to a strict 60-month non-extendable shelf life requirement designated as Type I, Code S, ensuring long-term usability without degradation. Packaging and labeling must fully conform to military specifications to maintain traceability, integrity, and readiness for deployment in defense environments. The items are intended for delivery to a military address in APO with ZIP code 96328-5120, underscoring their use within DoD operations. The procurement is classified as a subcontract under NAICS code 339113, and the Defense Logistics Agency is the issuing authority under the Department of Defense. Responses are due by August 14, 2026, with the solicitation posted on August 3, 2026.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract is for the procurement of sterile adhesive bandages measuring 0.750 inches by 3 inches, packaged 30 per package, with a flesh/clear color and affixed to a plastic adhesive backing. The total quantity ordered is three packages, with a delivery requirement of 20 days after the order date to the U.S. Naval Hospital Okinawa in Japan. Each package must maintain a minimum 36-month shelf life, with no more than five months elapsed between the manufacturer’s date and delivery to the government. All labeling and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items, and shelf life dates must be formatted per MMS1A. Packaging must be commercial, using sealed unit containers to preserve sterility and integrity, with outer shipping containers suitable for safe transit via common carrier at the lowest cost. The item is subject to the DLA Master List of Technical and Quality Requirements and must be labeled with the date of manufacture, expiration or retest date, and contract/lot number. Hazardous material labeling, if applicable, must conform to 29 CFR 1910.1200. Inspection and acceptance occur at the destination under FAR 52.246-2, with the government assuming responsibility. The contract implements clauses related to contracting type, equal opportunity, trafficking in persons, employment eligibility verification, and sustainable products, and requires compliance with NIST SP 800-171 for cybersecurity. Payment must be submitted through the Wide Area WorkFlow system, and the offeror must provide a valid Unique Entity Identifier and CAGE code. The solicitation is issued under NAICS 339113, with a potential LPTA award basis, and participation is open to all contractors regardless of socioeconomic status unless specified otherwise. All submissions must be made electronically via DIBBS by the specified response deadline.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVES, SURGEONS'
Solicitation # SPE2DS-26-T-302X
Surgeons' gloves made of neoprene with a biogel coating and a smooth surface are specified in size 7, color blue, and designed to be hand-specific for optimal fit and function. These disposable gloves are latex-free and powder-free, with sterile packaging and beaded cuffs to enhance secure donning. The gloves feature curved fingers for ergonomic comfort during surgical procedures and include a puncture indication feature to improve safety. Each pair is individually wrapped and packaged in units of 50 pairs per package. A strict shelf-life requirement of 36 months from manufacture applies, with no more than five months allowed to have passed between manufacture and government delivery. Packaging and quality standards align with DLA technical and quality requirements, and all supplies must comply with DLA packaging and identification removal regulations. The item is identified by NSN 6515-01-519-6343, with a single package ordered under purchase request 7017710669. Delivery is required within 20 days after award under solicitation SPE2DS-26-T-302X, issued by the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located in San Diego, California.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,
Solicitation # SPE2DH-26-T-5737
The contract is for the procurement of 35 disposal containers designed specifically for the safe handling and disposal of hypodermic needles and syringes. Each container measures between six and seven inches in length and one to two inches in diameter, featuring a securable cap and a lift-off cover to ensure containment and prevent accidental exposure. The product must comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6530-01-645-6923 and is subject to controls related to covered defense information. The solicitation was issued under number SPE2DH-26-T-5737, with responses due by August 10, 2026, and delivery required within 20 days of award to Fort Bragg, North Carolina, 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305D
The contract specifies the procurement of 10 packages of disposable applicators saturated with povidone-iodine, each package containing 50 individually wrapped swab sticks, for a total of 500 units. Each applicator must be sealed in a protective unit container to prevent damage, and all packages must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the delivery point in San Antonio, Texas. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with labeling that includes the manufacturer date, expiration or retest date, contract number, and lot number, all formatted per the latest revision of MMS1A. The shelf life must be a minimum of 15 months, with no more than two months elapsed between the manufacturing date and government delivery. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under RA001, RP001, and RQ011, with revisions controlled by the solicitation or award date. The NSN is 6515-01-519-2226, the solicitation number is SPE2DS-26-T-305D, bids are due by August 10, 2026, and delivery is required within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BOARD, CARDIAC
Solicitation # SPE2DH-26-T-5738
The contract is for a single unit of a heavy-duty plastic cardiac board measuring 15 1/2 inches by 21 1/2 inches by 3/4 inch, identified by NSN 6530-01-716-9177, to be delivered within five days of award. All packaging and packing must comply with commercial standards as specified in the procurement document, requiring each unit to be sealed in a container that protects against damage or breakage and shipped in exterior containers suitable for safe transit by common carrier at the lowest possible cost to Joint Base Charleston, South Carolina. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date. The solicitation, issued under number SPE2DH-26-T-5738, was posted on August 3, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
VALVE, SURGICAL DRAIN
Solicitation # SPE2DS-26-T-305B
The device is a latex-free surgical drain valve designed for gravity drainage of the chest cavity, with an overall outside diameter of 0.75 inches nominal and a body length of 6.5 inches nominal. It enables the one-way evacuation of air and fluids from the thoracic space while preventing backflow toward the patient, supporting the normalization of intrathoracic pressure. Features include a sterile, disposable universal barbed tube fitting for secure connection and is intended for single-use applications. Each unit must be individually sealed in a protective container to prevent damage or contamination and packed in commercial shipping containers suitable for safe transport via common carrier to the delivery point at Fort Hood, Texas, with the lowest applicable freight rate. The product must have a 36-month shelf life, and no more than seven months may have passed from the date of manufacturer to the date of delivery to the government. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with all labels including manufacturer date, expiration date, contract number, and lot number as specified in MMS-1A. Packaging and labeling requirements are mandatory and must adhere to DLA guidelines, with copies of the standard available through DLA Troop Support. The solicitation number is SPE2DS-26-T-305B, with a quantity of 20 units required for delivery within 20 days of award. Bidders must supply the NSN 6515-01-690-3796 and specify the source and part number being offered, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PLATFORM LIFT
Solicitation # SPE7M4-26-T-299E
The contract pertains to the procurement of a single Platform Lift with NSN 4940-01-716-9085 under solicitation SPE7M4-26-T-299E, requiring delivery within 10 days of award. Technical and quality standards referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with DLA packaging requirements is mandatory, including the use of commercial packaging as specified, sealed unit containers for protection, and shipping containers suitable for safe transport at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and copies of this standard are available through DLA Troop Support. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring prior government authorization. Only contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and DLA authorization may access such information. The contractor must also hold CMMC Level 2 certification from a certified third-party assessment organization and comply with all applicable cybersecurity requirements. The place of performance is Grand Ledge, Michigan, with the point of contact being Rory O’Reilly of the Fluid Handling Division under the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 456199
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-281T
The product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
All Other Health and Personal Care Retailers

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
The contract solicitation SPE2DS-26-T-301P seeks the procurement of test strips for sanitizing applications, specifically impregnated paper strips designed to measure quaternary ammonium compound (QAC) concentrations in dishwashing rinse water within a range of 50 to 400 ppm. The item is identified by NSN 6550-01-452-1775 and is to be delivered in vials containing 100 strips each, accompanied by waterproof plastic packaging, instructions, and a color chart for accurate measurement. The delivery is required within five days after order placement, with the specified destination being Offutt Air Force Base, Nebraska, under FOB Destination terms. Packaging and labeling must strictly conform to MIL-STD-2073-1E and the Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for all medical acquisitions and mandates barcode labeling with item identification, lot number, expiration date, and shipping data. The solicitation is issued by the Defense Logistics Agency Troop Support under the Department of Defense and is governed by a suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses. The contract type remains unspecified but includes Alternate I of FAR 52.216-1, indicating a potential fixed-price arrangement. Mandatory requirements include compliance with hazardous material labeling per 252.223-7001, submission of Material Safety Data Sheets (MSDS) prior to award, and adherence to cybersecurity standards including DFARS 252.204-7012 and NIST SP 800-171 assessments. Offerors must hold a Unique Entity ID, provide socioeconomic representations as applicable, and comply with employment verification, anti-trafficking, and small business subcontracting payment acceleration requirements. Electronic submission is required via the DIBBS portal with performance documentation and invoicing conducted through WAWF. Inspection and acceptance occur at the delivery point by the government, and all deliveries must be tracked and labeled for full supply chain traceability in accordance with medical acquisition protocols.
Family Planning Centers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
INTRAOSSEOUS INFUSION
Solicitation # SPE2DS-26-T-305E
The intravenous infusion system is a specialized medical device designed for rapid fluid resuscitation in pre-hospital and hospital emergency settings, particularly for treating hemorrhagic shock. The system consists of a clear plastic infusion tube with a stainless steel bone portal tip and Luer connector, an introducer, a strain-relief patch, and a clear plastic protector dome, all packaged as a single sterile unit. Each unit is intended for one-time use and must be shipped in sealed containers that safeguard integrity during transport. The product is supplied in packages of ten units, with a required shelf life of eighteen months, and no more than three months may have passed between the manufacturer’s date and delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. The device is subject to the DLA Master List of Technical and Quality Requirements, identified by RA001, and must adhere to DLA packaging specifications under RP001 and the removal of government identification from non-accepted supplies per RQ011. The NSN is 6515-01-530-6147, with a single package ordered under purchase request 7017715270, and delivery is required within twenty days of award under solicitation SPE2DS-26-T-305E, with performance directed to Fort Bragg, North Carolina.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, SUCTION, SURGICAL
Solicitation # SPE2DS-26-T-304L
The contract is for a 72-inch clear plastic surgical suction tube, supplied in packages of fifty units, with a mandatory shelf life of sixty months that cannot be extended. No more than nine months may have passed between the manufacturer’s production date and the delivery date to the government. The item must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and bidders must clearly state the source and part number being offered. Packaging must meet DLA packaging requirements, and any non-accepted supplies must have all government identification removed prior to return. The item is identified by NSN 6515-01-389-6158 with a single purchase request for one package, and delivery is required within ten days of award. The solicitation, issued under SPE2DS-26-T-304L, was posted on August 3, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 managed by the Department of Defense’s Medical Supply Chain division. Technical and quality requirements are governed by the DLA Master List, and the applicable revision is determined by the solicitation issue or award date. Point of contact for inquiries is Vernon Stevenson, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SAMPLING KIT, ARTERIAL
Solicitation # SPE2DS-26-T-302K
The contract specifies the procurement of 4 packages of 100 arterial blood gas sampling kits, each containing a 3 mL sterile syringe with a 23-gauge by 1-inch needle, prefilled with dry lithium heparin and equipped with a filter tip and protective cap. Each kit includes additional components such as a 2x2 inch alcohol prep pad, gauze, a patient label, a biohazard-labeled ice bag, a bandage, and a dry ice bag for temperature-controlled transport. All units must be commercial packaged in sealed containers designed to prevent damage or breakage, and shipped in exterior containers compliant with commercial standards to ensure safe, cost-effective delivery to the specified military address in APO, 96260-5479. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each item must be clearly marked accordingly. The kits have a fixed 36-month shelf life with no extensions permitted, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory. Bidders must provide the exact source and part number being offered, and all supplies must meet the specifications outlined in the solicitation, with delivery required within 84 days of award. The acquisition is under Federal procurement rules, administered by the Department of Defense through the Medical Supply Chain, and bid responses are due by August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, URETHRAL
Solicitation # SPE2DS-26-T-304C
This contract specifies the procurement of a disposable, siliconized rubber, Foley-type urethral catheter with a 5 mL balloon and 3-way valve, sized at 18 FR, supplied in sterile conditions in boxes of twelve. The item is regulated by the FDA and must comply with stringent medical and defense logistics standards, including packaging and marking requirements defined by Medical Marking Standard No. 1, which supersedes MIL-STD-129. The catheter has a non-extendable shelf life of 60 months and must be furnished with a clearly specified source and part number, with Cardinal Health 200, LLC and C. R. Bard, Inc. listed as approved manufacturers. Packaging must adhere to commercial standards and MIL-STD-2073-1E for protection during transit, with palletization and marking conforming to DLA requirements. The item is designated for delivery FOB destination, with zero tolerance for quantity variance, and must be inspected and accepted at the delivery point. The delivery deadline is August 5, 2026, with a required 20-day lead time from order placement. No mercury or mercury-containing compounds may be used in the product except for specific, exempted applications under strict containment guidelines. All shipments must be addressed to the designated APO and Ramstein, Germany locations, and transportation logistics are governed by DLA procedural notes. The solicitation is issued under DoD procurement authority with an NSN of 6515-00-104-8695 and is managed through the Defense Logistics Agency.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MANIFOLD ASSEMBLY, ASPI
Solicitation # SPE2DS-26-T-275R
The contract pertains to the procurement of two units of a Manifold Assembly, Aspirator, identified by National Stock Number 6515-01-699-5453, with a total contract value of $516.60 at $258.30 per unit. Delivery is required within 20 days after the date of order, with FOB Destination terms and delivery to Scott AFB, 62225-5219. Packaging and marking must adhere strictly to commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129 for all medical acquisitions; each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Preservation and packaging must comply with MIL-STD-2073-1E, using standardized codes for QUP, packaging, and preservation methods, though specific preservation materials are not detailed. The contractor must submit Safety Data Sheets in accordance with Federal Standard No. 313 and OSHA’s Hazard Communication Standard, ensuring appropriate labeling of hazardous materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must be met at the time of solicitation issuance. The contract mandates use of the Wide Area WorkFlow system for all invoicing and receiving reports, and includes clauses covering cybersecurity, controlled information safeguarding, trafficking in persons, employment eligibility verification, sustainable products, and whistleblower protections, with several deviations authorized for alternate language. The contractor must provide their Unique Entity ID and CAGE code, and represent their size status, with additional disclosures required if claiming small business or socioeconomic classifications. There is no formal section listing attachments, and while some documents like MMS No. 1 are referenced, no formal attachments are provided. Inspection and acceptance will occur at the destination, with the Government responsible for final evaluation. The solicitation is competitive and issued through the DLA Internet Bid Board System, with responses due by August 3, 2026, and no option quantities or extended performance periods are included.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KIT
Solicitation # SPE2DS-26-T-302M
The intubation kit is a disposable medical device containing one endotracheal tube with a stylet, one 10 cc syringe, one Velcro tube tie, and one pack of surgical lubricant, offered as a single unit. The kit must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and delivery to the government. All packaging must include the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, and the contract or lot number to ensure traceability and compliance. Technical and quality requirements referenced under RA001, RQ011, and RP001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition type. The product is identified by NSN 6515-01-632-4831, with a purchase request of 7017710662QTY: 1, and delivery is required within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-302M, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance location at Hurlburht Field, Florida, and primary point of contact James Burke at james.burkejr@dla.mil.
All Other Health and Personal Care Retailers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details