Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MASK, RESPIRATOR

Active
SPE2DS-26-T-304GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of NIOSH-approved particulate respirators, designated as PFR95 type, designed for infection control and protection against tuberculosis transmission. Each respirator features fluidshield protection and filters 1.0 micron particles at 99.6 percent efficiency at a flow rate of 50 liters per minute. The masks are regular size, packaged in boxes of 35 units, and must be stored in their original packaging away from contamination, dust, sunlight, extreme temperatures, excessive moisture, damaging chemicals, and radiation. Storage conditions must be maintained between -4°F (-20°C) and +86°F (+30°C) with humidity not exceeding 80 percent. The item has a non-extendable shelf life of 60 months under the RS001 requirement for TYPE I (CODE S) items. The procurement is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with packaging, identification, and supply handling following DLA standards including RP001 and RQ011. The NSN 6515-01-450-2057 is listed under a single package quantity, with a delivery requirement of 20 days ADO. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-304G, was posted on August 3, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office located at Tinker AFB, Oklahoma. The point of contact is Vernon Stevenson, reachable via phone and email provided.

General Info

NIOSH-approved PFR95 respirators, fluidshield, 60-month shelf life, 20-day delivery, DLA standards, NSN 6515-01-450-2057.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

7050 AIR DEPOT BLVD BLDG 1094, TINKER AFB, OK, 73145, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-304G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Vernon Stevenson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MASK,RESPIRATOR
MASK,RESPIRATOR
RESPIRATOR AIR FILTERING INFECTION CONTROL 35S; NIOSH APPROVED FOR
PROTECTION AGAINST THE TRANSMISSION OF TUBERCULOSIS. STORAGE GUIDELINES:
RESPIRATORS SHALL BE STORED IN THE ORIGINAL PACKAGING,AWAY FROM
CONTAMINATED AREAS, DUST, SUNLIGHT, EXTREME TEMPERATURES, EXCESSIVE
MOISTURE, DAMAGING CHEMICALS AND RADIATION,; STORE IN TEMPERATURES
BETWEEN -4 F (-20 C) AND +86 F (+30 C) AND NOT EXCEEDING 80% RH;
PARTICULATE RESPIRATOR TYPE PFR95, WITH FLUIDSHIELD PROTECTION; FILTERS
1.0 MICRON AT 50 LITERS PER MINUTE AT99.6 PERCENT EFFICIENCY; REGULAR
SIZE; 35 MASKS PER BOX
UNIT OF ISSUE: PACKAGE/35EACH
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-450-2057 Quantity: 1 PG Purchase Request: 7017710606QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
BAG, URINE COLLECTION
Solicitation # SPE2DS-26-T-281R
The contract specifies the procurement of sterile, individually sealed disposable urine collection bags with a 2000 mL capacity, each equipped with a plastic input and drain tube assembly, an anti-reflux valve integrated into the drip chamber, and a hanger for secure attachment to beds, chairs, or patients. The product must meet strict medical standards, including compliance with FDA Regulation 876.5250 as a Class II device, requiring registration, listing, proper labeling, and adherence to Good Manufacturing Practices, even if a 510(k) submission is not mandatory. Each unit must have a shelf life of 60 months, with no more than nine months elapsed between manufacturing and delivery to the government. All containers must be clearly marked with the lot or control number and the manufacture date preceded by “MFD.” Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include commercial unit containers that protect against damage, packed in appropriate shipping containers to ensure safe, cost-effective delivery to the designated destination. The contract calls for delivery of three packages (each containing 20 units), totaling 60 bags, under NSN 6515-01-059-2473, with a unit price of $3.00 and total contract value of $9.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance. Inspection and acceptance occur at the point of delivery, and packaging must conform to MIL-STD-2073-1E. The supplier must be a registered entity such as The Kendall Company LP DBA or Cardinal Health 200, LLC, both offering part number 6208. The procurement is governed by DLA’s technical and quality requirements as outlined in the Master List, and all documentation must align with DLA’s eProcurement policies. Covered defense information may apply, and bids must include the exact source, part number, and manufacturer details for FDA and procurement verification. The solicitation is issued under SPE2DS-26-T-281R for delivery to Fort Bliss, Texas.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5762
The contract specifies the procurement of surgical drapes made from nonwoven disposable material, sized 18 x 26 inches, intended for minor surgical procedures and required to be individually sealed and sterile. Each unit of issue consists of a package of 300 drapes, and the product must maintain a shelf life of 60 months, with no more than nine months having elapsed between the date of manufacture and the date of delivery to the government. Compliance with DLA Packaging Requirements for Procurement is mandatory, and the technical and quality standards referenced under R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is identified by NSN 6530-01-169-7491, with a single purchase request for one package and a delivery requirement within ten days of award. The solicitation, numbered SPE2DH-26-T-5762, was posted on August 3, 2026, with responses due by August 10, 2026, under a federal procurement by the Department of Defense’s Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact details.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4288
The solicitation SPE2DP-26-T-4288 issued by the Defense Logistics Agency under the NAICS code 424210 seeks the procurement of OMEPRAZOLE EXTENDED-RELEASE CAPSULES, identified by NSN 6505-01-624-7068, with a total quantity of nine bulk tablet units. The contract requires delivery to military installations at Fort Stewart, Georgia, and Fort Bragg, North Carolina, under FOB Destination terms, with the original delivery date set for July 29, 2026, and a delivery window of 20 calendar days. All packaging and labeling must strictly adhere to MIL-STD-129 and the Medical Marking Standard No. 1, superseding standard military marking requirements for medical items, while hazardous materials must comply with FED-STD-313 and TQ Requirement IP025, and non-hazardous materials must follow ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements. Palletization must conform to RP001: DLA Packaging Requirements for Procurement PKGING DATA-QUP:001, and each unit must be sealed in suitable containers to ensure integrity during transport. The contract mandates electronic invoicing through Wide Area WorkFlow and requires compliance with numerous FAR and DFARS clauses covering employment practices, cybersecurity, supply chain security, environmental protection, and contractor accountability, including mandatory adherence to NIST SP 800-171 for safeguarding covered defense information and reporting cyber incidents. The solicitation includes requirements for whistleblower protections, restrictions on the use of mandatory arbitration agreements, prohibitions on acquiring equipment from Communist Chinese military companies, and controls on the disclosure and handling of government information. No unit prices or contract value are provided in Section B, and no evaluation factors, award methodology, or detailed payment or accounting data are specified. Proposals must be submitted electronically via the DLA Internet Bid Board System by August 3, 2026, with no physical submissions accepted. All offerors must provide valid Unique Entity Identifiers and CAGE codes, and must complete required representations regarding small business status, socioeconomic classifications, and compliance with covered telecommunications prohibitions. No attachments are listed, and all deliverables are governed by the technical specifications, packaging standards, and compliance obligations outlined in the contract documentation.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5739
The contract specifies the procurement of a small surgical drape made of transparent, disposable, sterile plastic measuring 1¼ by 17⅜ inches with an adhesive area protected by a liner, intended for general surgical use. Each unit must be individually sealed in a suitable container that safeguards against damage or breakage, and all units must be packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate to the designated point of delivery, which is Offutt AFB, zip 68113-1044. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be marked accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6530-01-047-9697 with a quantity of one pack, and delivery is required within five days of award. The solicitation number is SPE2DH-26-T-5739, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by August 10, 2026, and point of contact established as Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5759
The contract specifies the procurement of 100 glass vacuum blood collecting test tubes, each with a 15 mL capacity measuring 16 by 125 mm and fitted with a rubber cap, all without anticoagulant and delivered in nonsterile condition. Each package contains 100 units, and the product must have a minimum shelf life of 24 months from the date of manufacture, with no more than three months elapsed between manufacture and delivery to the government. Labeling requirements include the NSN 6640-00-145-1143, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number or lot number. Bidders must clearly identify the source and part number being supplied. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and all units must be packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest possible rate to the designated delivery point in San Antonio, Texas. Material must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation is open under contract number SPE2DH-26-T-5759, with bids due by August 10, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
RESUSCITATION KIT, MOUT
Solicitation # SPE2DS-26-T-303V
The resuscitation kit is a pediatric-specific, latex-free Broselow Hinkle system designed for emergency use and contains a comprehensive set of components including 26 procedural modules organized across seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. The kit is configured as a mouth-to-mask or oronasal resuscitator system, ensuring readiness for airway management in pediatric emergency scenarios. Each unit must have a 24-month shelf life, and no more than three months may have passed between the date of manufacture and delivery to the government to ensure product integrity and usability upon receipt. The kit is identified by NSN 6515-01-513-9276 and is procured under solicitation SPE2DS-26-T-303V, with a requirement for delivery within 20 days of award. Labels must include the NSN, manufacturer and CAGE code, dates of manufacture and expiration or retest, and the contract or lot number, adhering to all technical and quality requirements referenced in the DLA Master List. Packaging, handling, and labeling must comply with DLA standards including RA001, RP001, and RQ011 provisions, ensuring compatibility with federal supply systems and proper identification removal from non-accepted items. The procurement is for a single unit with a purchase request number 7017720931, and performance is specified to occur at Fort Bragg, North Carolina.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5734
The contract is for the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange coloration to indicate contamination, designed specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package of 200 units, and the product must meet strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to commercial standards, with each unit sealed in a container that protects against damage and be packed in suitable exterior shipping containers to ensure safe, cost-effective delivery by common carriers to the contract-specified destination. All packaging and marking must comply with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and must not include government identification on non-accepted supplies. The product is sourced from approved suppliers including MeDeGen Medical Products, LLC and Baxter Healthcare Corp., with the NSN 6530-01-078-0365 and part numbers specified. Delivery is required FOB destination in 105 days with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract, issued under solicitation SPE2DH-26-T-5734, follows DLA’s standard procedures, and the unit of issue is consistent with DoD and ANSI X12 guidelines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
HARNESS, CARRYING LITTE
Solicitation # SPE2DS-26-T-302A
The contract specifies the procurement of one harness for carrying a litter, part of a set of two, constructed from 2-inch polypropylene with two shoulder pads and two clips, each unit to be delivered as a single item. The product is subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other specifications such as ASTM D3951. Packaging must comply with DLA’s packaging requirements and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to ensure protection from damage during transit and shipped in commercial exterior containers to guarantee safe and cost-effective delivery. The item is regulated by the FDA as a Class I device requiring registration, listing, compliance with labeling regulations, and good manufacturing practices, though a 510(k) premarket notification is not required. The harness is subject to mercury restrictions, prohibiting intentional addition or direct contact, with exceptions only for functional uses in batteries, instruments, or sensors as specified. Delivery is required within 20 days to FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The shipment must follow RDD 777 guidelines, using the fastest traceable means, explicitly excluding parcel post. The delivery address is the USS America LHA 6 located at FPO AP 96660, with government-specific identifiers and routing codes provided for internal processing. The NSN is 6530-01-472-3860, the purchase request number is 7017708448, and the contract number is SPE2DS-26-T-302A, with a required delivery date of August 5, 2026. The supplier must adhere to all DLA packaging and labeling directives, including palletization standards, and ensure the item meets the full scope of medical procurement regulations as applicable to defense medical equipment.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
Federal
Federal Contract Holder (GSA, SEWP, VA Schedule) ResellerThe contract seeks a reseller holding an existing federal contract vehicle such as GSA, NASA SEWP, or VA Federal Supply Schedules to provide specified surgical equipment under a subcontract arrangement. The procurement is managed by the Department of Veterans Affairs through its 242-NETWORK Contract Office 02 and requires delivery to a place of performance in New York, NY with the ZIP code 10010-5011. Interested parties must respond by the deadline of August 10, 2026, and must qualify under the NAICS code 423450, which relates to the wholesale trade of medical, dental, and hospital equipment and supplies. The reseller must already possess authorization to transact on one of the designated federal contract vehicles to fulfill this requirement. No set-aside designation is specified, and submission details and point of contact information are not provided in the posting.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
SLED
Medical Equipment and Supplies ProvisionOtero Junior College is seeking a subcontractor to supply and regularly restock athletic training room consumables and durable medical equipment, including taping supplies, braces, cold therapy units, and rehabilitation tools. The contract falls under NAICS code 423450, which pertains to medical and surgical equipment and supplies merchant wholesalers. The solicitation was posted on August 3, 2026, with a deadline for responses set for August 10, 2026, at 8:00 PM. The place of performance and agency office details are not specified, but the contract is tied to the college’s operations in Colorado. All equipment and supplies must meet the operational needs of the athletic training program, ensuring consistent availability for injury prevention, treatment, and rehabilitation. Interested parties must submit their proposals through the online portal linked in the solicitation prior to the deadline.
Otero Junior College

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
International
The Supply of Laboratory Testing Accessories LAB-20-0074
Solicitation # GOJEP-939792
Western Regional Health Authority

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
CT Phantom Scanner Supply and DeliveryThe contract requires the supply and delivery of one Phantom Computed Tomography Scanner with a 50-slice thickness, identified by NSN 6525-01-701-0733, to Fort Bragg, North Carolina, within five days of award. The item must be shipped in full compliance with federal packaging and labeling regulations, and transportation must be conducted via a U.S.-flag vessel as mandated by law. Delivery is time-sensitive, with strict adherence to the five-day window critical to fulfill contractual obligations. The procurement is categorized as a subcontract under NAICS code 423450 and is administered by the Department of Defense through the Medical Supply Chain FSH office, with performance location confirmed at Fort Bragg, ZIP 28310. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 456199
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-281T
The product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
All Other Health and Personal Care Retailers

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
The contract solicitation SPE2DS-26-T-301P seeks the procurement of test strips for sanitizing applications, specifically impregnated paper strips designed to measure quaternary ammonium compound (QAC) concentrations in dishwashing rinse water within a range of 50 to 400 ppm. The item is identified by NSN 6550-01-452-1775 and is to be delivered in vials containing 100 strips each, accompanied by waterproof plastic packaging, instructions, and a color chart for accurate measurement. The delivery is required within five days after order placement, with the specified destination being Offutt Air Force Base, Nebraska, under FOB Destination terms. Packaging and labeling must strictly conform to MIL-STD-2073-1E and the Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for all medical acquisitions and mandates barcode labeling with item identification, lot number, expiration date, and shipping data. The solicitation is issued by the Defense Logistics Agency Troop Support under the Department of Defense and is governed by a suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses. The contract type remains unspecified but includes Alternate I of FAR 52.216-1, indicating a potential fixed-price arrangement. Mandatory requirements include compliance with hazardous material labeling per 252.223-7001, submission of Material Safety Data Sheets (MSDS) prior to award, and adherence to cybersecurity standards including DFARS 252.204-7012 and NIST SP 800-171 assessments. Offerors must hold a Unique Entity ID, provide socioeconomic representations as applicable, and comply with employment verification, anti-trafficking, and small business subcontracting payment acceleration requirements. Electronic submission is required via the DIBBS portal with performance documentation and invoicing conducted through WAWF. Inspection and acceptance occur at the delivery point by the government, and all deliveries must be tracked and labeled for full supply chain traceability in accordance with medical acquisition protocols.
Family Planning Centers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
MASK, OXYGEN
Solicitation # SPE2DS-26-T-302S
The contract specifies the procurement of two oxygen masks designed for large canine use, each measuring 4.5 inches by 4.5 inches, with the unit of issue being each. The masks must comply with strict packaging and marking standards, including commercial packaging in sealed containers that protect against damage and shipping in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is subject to DLA packaging requirements and includes provisions for the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-302S, with a response deadline of August 10, 2026, and delivery expected within 20 days after award, under a federal procurement by the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
INTRAOSSEOUS INFUSION
Solicitation # SPE2DS-26-T-305E
The intravenous infusion system is a specialized medical device designed for rapid fluid resuscitation in pre-hospital and hospital emergency settings, particularly for treating hemorrhagic shock. The system consists of a clear plastic infusion tube with a stainless steel bone portal tip and Luer connector, an introducer, a strain-relief patch, and a clear plastic protector dome, all packaged as a single sterile unit. Each unit is intended for one-time use and must be shipped in sealed containers that safeguard integrity during transport. The product is supplied in packages of ten units, with a required shelf life of eighteen months, and no more than three months may have passed between the manufacturer’s date and delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. The device is subject to the DLA Master List of Technical and Quality Requirements, identified by RA001, and must adhere to DLA packaging specifications under RP001 and the removal of government identification from non-accepted supplies per RQ011. The NSN is 6515-01-530-6147, with a single package ordered under purchase request 7017715270, and delivery is required within twenty days of award under solicitation SPE2DS-26-T-305E, with performance directed to Fort Bragg, North Carolina.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, SUCTION, SURGICAL
Solicitation # SPE2DS-26-T-304L
The contract is for a 72-inch clear plastic surgical suction tube, supplied in packages of fifty units, with a mandatory shelf life of sixty months that cannot be extended. No more than nine months may have passed between the manufacturer’s production date and the delivery date to the government. The item must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and bidders must clearly state the source and part number being offered. Packaging must meet DLA packaging requirements, and any non-accepted supplies must have all government identification removed prior to return. The item is identified by NSN 6515-01-389-6158 with a single purchase request for one package, and delivery is required within ten days of award. The solicitation, issued under SPE2DS-26-T-304L, was posted on August 3, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 managed by the Department of Defense’s Medical Supply Chain division. Technical and quality requirements are governed by the DLA Master List, and the applicable revision is determined by the solicitation issue or award date. Point of contact for inquiries is Vernon Stevenson, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract is for the procurement of sterile adhesive bandages measuring 0.750 inches by 3 inches, packaged 30 per package, with a flesh/clear color and affixed to a plastic adhesive backing. The total quantity ordered is three packages, with a delivery requirement of 20 days after the order date to the U.S. Naval Hospital Okinawa in Japan. Each package must maintain a minimum 36-month shelf life, with no more than five months elapsed between the manufacturer’s date and delivery to the government. All labeling and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items, and shelf life dates must be formatted per MMS1A. Packaging must be commercial, using sealed unit containers to preserve sterility and integrity, with outer shipping containers suitable for safe transit via common carrier at the lowest cost. The item is subject to the DLA Master List of Technical and Quality Requirements and must be labeled with the date of manufacture, expiration or retest date, and contract/lot number. Hazardous material labeling, if applicable, must conform to 29 CFR 1910.1200. Inspection and acceptance occur at the destination under FAR 52.246-2, with the government assuming responsibility. The contract implements clauses related to contracting type, equal opportunity, trafficking in persons, employment eligibility verification, and sustainable products, and requires compliance with NIST SP 800-171 for cybersecurity. Payment must be submitted through the Wide Area WorkFlow system, and the offeror must provide a valid Unique Entity Identifier and CAGE code. The solicitation is issued under NAICS 339113, with a potential LPTA award basis, and participation is open to all contractors regardless of socioeconomic status unless specified otherwise. All submissions must be made electronically via DIBBS by the specified response deadline.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVES, SURGEONS'
Solicitation # SPE2DS-26-T-302X
Surgeons' gloves made of neoprene with a biogel coating and a smooth surface are specified in size 7, color blue, and designed to be hand-specific for optimal fit and function. These disposable gloves are latex-free and powder-free, with sterile packaging and beaded cuffs to enhance secure donning. The gloves feature curved fingers for ergonomic comfort during surgical procedures and include a puncture indication feature to improve safety. Each pair is individually wrapped and packaged in units of 50 pairs per package. A strict shelf-life requirement of 36 months from manufacture applies, with no more than five months allowed to have passed between manufacture and government delivery. Packaging and quality standards align with DLA technical and quality requirements, and all supplies must comply with DLA packaging and identification removal regulations. The item is identified by NSN 6515-01-519-6343, with a single package ordered under purchase request 7017710669. Delivery is required within 20 days after award under solicitation SPE2DS-26-T-302X, issued by the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located in San Diego, California.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SAMPLING KIT, ARTERIAL
Solicitation # SPE2DS-26-T-302K
The contract specifies the procurement of 4 packages of 100 arterial blood gas sampling kits, each containing a 3 mL sterile syringe with a 23-gauge by 1-inch needle, prefilled with dry lithium heparin and equipped with a filter tip and protective cap. Each kit includes additional components such as a 2x2 inch alcohol prep pad, gauze, a patient label, a biohazard-labeled ice bag, a bandage, and a dry ice bag for temperature-controlled transport. All units must be commercial packaged in sealed containers designed to prevent damage or breakage, and shipped in exterior containers compliant with commercial standards to ensure safe, cost-effective delivery to the specified military address in APO, 96260-5479. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each item must be clearly marked accordingly. The kits have a fixed 36-month shelf life with no extensions permitted, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory. Bidders must provide the exact source and part number being offered, and all supplies must meet the specifications outlined in the solicitation, with delivery required within 84 days of award. The acquisition is under Federal procurement rules, administered by the Department of Defense through the Medical Supply Chain, and bid responses are due by August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305D
The contract specifies the procurement of 10 packages of disposable applicators saturated with povidone-iodine, each package containing 50 individually wrapped swab sticks, for a total of 500 units. Each applicator must be sealed in a protective unit container to prevent damage, and all packages must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the delivery point in San Antonio, Texas. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with labeling that includes the manufacturer date, expiration or retest date, contract number, and lot number, all formatted per the latest revision of MMS1A. The shelf life must be a minimum of 15 months, with no more than two months elapsed between the manufacturing date and government delivery. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under RA001, RP001, and RQ011, with revisions controlled by the solicitation or award date. The NSN is 6515-01-519-2226, the solicitation number is SPE2DS-26-T-305D, bids are due by August 10, 2026, and delivery is required within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, URETHRAL
Solicitation # SPE2DS-26-T-304C
This contract specifies the procurement of a disposable, siliconized rubber, Foley-type urethral catheter with a 5 mL balloon and 3-way valve, sized at 18 FR, supplied in sterile conditions in boxes of twelve. The item is regulated by the FDA and must comply with stringent medical and defense logistics standards, including packaging and marking requirements defined by Medical Marking Standard No. 1, which supersedes MIL-STD-129. The catheter has a non-extendable shelf life of 60 months and must be furnished with a clearly specified source and part number, with Cardinal Health 200, LLC and C. R. Bard, Inc. listed as approved manufacturers. Packaging must adhere to commercial standards and MIL-STD-2073-1E for protection during transit, with palletization and marking conforming to DLA requirements. The item is designated for delivery FOB destination, with zero tolerance for quantity variance, and must be inspected and accepted at the delivery point. The delivery deadline is August 5, 2026, with a required 20-day lead time from order placement. No mercury or mercury-containing compounds may be used in the product except for specific, exempted applications under strict containment guidelines. All shipments must be addressed to the designated APO and Ramstein, Germany locations, and transportation logistics are governed by DLA procedural notes. The solicitation is issued under DoD procurement authority with an NSN of 6515-00-104-8695 and is managed through the Defense Logistics Agency.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MANIFOLD ASSEMBLY, ASPI
Solicitation # SPE2DS-26-T-275R
The contract pertains to the procurement of two units of a Manifold Assembly, Aspirator, identified by National Stock Number 6515-01-699-5453, with a total contract value of $516.60 at $258.30 per unit. Delivery is required within 20 days after the date of order, with FOB Destination terms and delivery to Scott AFB, 62225-5219. Packaging and marking must adhere strictly to commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129 for all medical acquisitions; each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Preservation and packaging must comply with MIL-STD-2073-1E, using standardized codes for QUP, packaging, and preservation methods, though specific preservation materials are not detailed. The contractor must submit Safety Data Sheets in accordance with Federal Standard No. 313 and OSHA’s Hazard Communication Standard, ensuring appropriate labeling of hazardous materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must be met at the time of solicitation issuance. The contract mandates use of the Wide Area WorkFlow system for all invoicing and receiving reports, and includes clauses covering cybersecurity, controlled information safeguarding, trafficking in persons, employment eligibility verification, sustainable products, and whistleblower protections, with several deviations authorized for alternate language. The contractor must provide their Unique Entity ID and CAGE code, and represent their size status, with additional disclosures required if claiming small business or socioeconomic classifications. There is no formal section listing attachments, and while some documents like MMS No. 1 are referenced, no formal attachments are provided. Inspection and acceptance will occur at the destination, with the Government responsible for final evaluation. The solicitation is competitive and issued through the DLA Internet Bid Board System, with responses due by August 3, 2026, and no option quantities or extended performance periods are included.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details