Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HARNESS, CARRYING LITTE

Active
SPE2DS-26-T-302AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one harness for carrying a litter, part of a set of two, constructed from 2-inch polypropylene with two shoulder pads and two clips, each unit to be delivered as a single item. The product is subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other specifications such as ASTM D3951. Packaging must comply with DLA’s packaging requirements and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to ensure protection from damage during transit and shipped in commercial exterior containers to guarantee safe and cost-effective delivery. The item is regulated by the FDA as a Class I device requiring registration, listing, compliance with labeling regulations, and good manufacturing practices, though a 510(k) premarket notification is not required. The harness is subject to mercury restrictions, prohibiting intentional addition or direct contact, with exceptions only for functional uses in batteries, instruments, or sensors as specified. Delivery is required within 20 days to FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The shipment must follow RDD 777 guidelines, using the fastest traceable means, explicitly excluding parcel post. The delivery address is the USS America LHA 6 located at FPO AP 96660, with government-specific identifiers and routing codes provided for internal processing. The NSN is 6530-01-472-3860, the purchase request number is 7017708448, and the contract number is SPE2DS-26-T-302A, with a required delivery date of August 5, 2026. The supplier must adhere to all DLA packaging and labeling directives, including palletization standards, and ensure the item meets the full scope of medical procurement regulations as applicable to defense medical equipment.

General Info

One polypropylene litter harness, FDA Class I, DLA-compliant, delivered FOB destination by August 5, 2026 to USS America LHA 6.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

UNIT 100233 BOX 1, FPO, AP, 96660, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-302A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Lisa Thomas-Wright
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HARNESS,CARRYING LITTER
HARNESS, CARRYING LITTER<(>,<)>
ONE OF A SET OF TWO<(>,<)>
2 INCH POLYPROPYLENE, 2 SHOULDER PADS, 2 CLIPS<(>,<)>
EACH
U/I = EACH
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
REGULATION 880.6900 CLASS I EVEN THOUGH A 510(K) IS NOT REQUIRED, IT IS NECESSARY TO MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE: REGISTRATION AND LISTING, LABELING OR GMP'S.
SPE2DS-26-T-302A
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
LIFESAVING SYSTEMS LLC 64249 P/N 402-8
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017708448 0001 EA 1.000
NSN/MATERIAL:6530014723860
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N20103
USS AMERICA LHA 6
UNIT 100233 BOX 1
FPO AP 96660
US
SPE2DS-26-T-302A
SECTION B
PR: 7017708448 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N20103
USS AMERICA LHA 6
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2010361890191
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE2DS-26-T-302A NSN/Part Number: 6530-01-472-3860 Quantity: 1 EA Purchase Request: 7017708448QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5739
The contract specifies the procurement of a small surgical drape made of transparent, disposable, sterile plastic measuring 1¼ by 17⅜ inches with an adhesive area protected by a liner, intended for general surgical use. Each unit must be individually sealed in a suitable container that safeguards against damage or breakage, and all units must be packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate to the designated point of delivery, which is Offutt AFB, zip 68113-1044. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be marked accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6530-01-047-9697 with a quantity of one pack, and delivery is required within five days of award. The solicitation number is SPE2DH-26-T-5739, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by August 10, 2026, and point of contact established as Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5734
The contract is for the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange coloration to indicate contamination, designed specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package of 200 units, and the product must meet strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to commercial standards, with each unit sealed in a container that protects against damage and be packed in suitable exterior shipping containers to ensure safe, cost-effective delivery by common carriers to the contract-specified destination. All packaging and marking must comply with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and must not include government identification on non-accepted supplies. The product is sourced from approved suppliers including MeDeGen Medical Products, LLC and Baxter Healthcare Corp., with the NSN 6530-01-078-0365 and part numbers specified. Delivery is required FOB destination in 105 days with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract, issued under solicitation SPE2DH-26-T-5734, follows DLA’s standard procedures, and the unit of issue is consistent with DoD and ANSI X12 guidelines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
CT Phantom Scanner Supply and DeliveryThe contract requires the supply and delivery of one Phantom Computed Tomography Scanner with a 50-slice thickness, identified by NSN 6525-01-701-0733, to Fort Bragg, North Carolina, within five days of award. The item must be shipped in full compliance with federal packaging and labeling regulations, and transportation must be conducted via a U.S.-flag vessel as mandated by law. Delivery is time-sensitive, with strict adherence to the five-day window critical to fulfill contractual obligations. The procurement is categorized as a subcontract under NAICS code 423450 and is administered by the Department of Defense through the Medical Supply Chain FSH office, with performance location confirmed at Fort Bragg, ZIP 28310. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesA system outage caused a 504 gateway timeout, preventing access to the prime contract details and blocking the decomposition of subcontract opportunities. As a result, the solicitation titled "Unable to Retrieve Subcontract Opportunities" was posted on August 2, 2026, with a response deadline of August 10, 2026. The opportunity falls under the subcontract type and is associated with the Medical Supply Chain Pharm FSA under the Department of Defense, with performance expected at Offutt AFB, Nebraska, zip code 68113-1044. No solicitation number, NAICS code, set-aside type, organization type, or point of contact information is available due to the system failure, and all further details can only be accessed via the provided DIBBS link.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
No subcontract opportunities identifiedNo subcontract opportunities have been identified for this solicitation under the Medical Supply Chain MD Surg FSF, managed by the Department of Defense. The posting date is August 2, 2026, with a response deadline of August 10, 2026, both set at 5:00 PM. The place of performance is listed as Fort Hood, Texas, with a zip code of 76544. The solicitation number is SPE2DS26T294B, and no information is available regarding set-aside type, NAICS code, organization type, or point of contact. The contract type is categorized as a subcontract, but no specific opportunities or requirements have been outlined in the system due to configuration limitations. Access to further details is available through the provided DIBBS link.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Sustainable Products SourcingThe contract titled Sustainable Products Sourcing is a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF, requiring the supply of medical or logistics products that meet federal green procurement standards as defined in FAR 52.223-23. All delivered items must adhere strictly to environmentally sustainable criteria, ensuring minimal environmental impact through life cycle assessment, reduced toxicity, energy efficiency, and responsible sourcing. The place of performance is specified as Williamsburg, Virginia, with a zip code of 23185-5830, and the NAICS code 423450 indicates the industry classification pertains to wholesale trade of medical, dental, and hospital supplies and equipment. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026, indicating a short procurement window for qualified vendors to submit proposals. The contract is not subject to any set-aside designation and is accessible via the DIBBS platform, requiring interested parties to engage through that system for full terms and submission details. Compliance with all federal environmental regulations and documentation of sustainable attributes will be a condition of award and performance.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Supply of Commercial-Off-The-Shelf (COTS) Medical or Logistics SuppliesThe contract is for the procurement and delivery of commercial-off-the-shelf medical or logistics supplies in bulk quantities to the Defense Logistics Agency under the Medical Supply Chain MD Surg FSF organization within the Department of Defense. All supplies must strictly comply with federal packaging, labeling, and invoicing standards to ensure seamless integration into the military supply chain. The place of performance is specified as Williamsburg, Virginia, with a zip code of 23185-5830, indicating the primary delivery location for these materials. The NAICS code 423450 identifies the industry as Medical and Dental Equipment and Supplies Merchant Wholesalers, confirming the nature of the goods being sourced. The solicitation is structured as a subcontract and is open for responses until August 10, 2026, with the opportunity posted on August 2, 2026. There is no set-aside designation specified, meaning the contract is open to all eligible vendors regardless of business size or ownership classification. Vendors must be prepared to meet stringent federal contractual requirements, including accurate documentation and adherence to standardized shipping and labeling protocols. The contract opportunity is accessible via the DIBBS portal, and proposers are expected to respond in full compliance with federal acquisition regulations applicable to bulk supply contracts within the defense sector.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Insufficient Data to Identify Subcontract OpportunitiesNo valid subcontract opportunities can be identified due to insufficient information, including the absence of a Statement of Work, CLIN details, pricing structure, and any special requirements necessary to define discrete sub-activities. The solicitation, posted on August 2, 2026, with a response deadline of August 10, 2026, is categorized as a subcontract under the Department of Defense’s Medical Supply Chain Pharm FSA, and is associated with a place of performance in APO with ZIP code 09094-3219. Despite the public listing via the DIBBS portal, critical data elements required for potential offerors to assess feasibility, scope, or cost are missing, rendering the opportunity non-actionable for subcontracting purposes. No set-aside type, NAICS code, or point of contact has been provided to further clarify or enable participation.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Medical-Grade Component SupplyThe contract requires the supply of medical-grade components, including digital blood pressure monitors, compatible cuffs, and lithium batteries, all of which must meet FDA compliance standards and be ruggedized to MIL-STD-810 specifications to withstand harsh operational environments. Traceability throughout the manufacturing and delivery process is mandatory, ensuring full accountability and quality control for each unit provided. These components are intended for use in military medical applications and must adhere to stringent regulatory and durability requirements to ensure reliability in field conditions. The solicitation is classified as a subcontract under NAICS code 423450, managed by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Charleston AFB, South Carolina, zip code 29404-4704. Responses are due by August 10, 2026, and interested parties must submit through the designated DIBBS portal. Although no set-aside provisions are specified, all submissions must fully comply with federal medical device regulations and military environmental standards to be considered eligible for award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
Unable to retrieve subcontract opportunitiesThe contract opportunity under the solicitation number SPE2DS26T300F is labeled as a subcontract and was posted on August 2, 2026, with a response deadline of August 10, 2026. It is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, with the place of performance located at Cannon AFB, New Mexico, zip code 88101-5009. No information is available regarding theNAICS code, type of set-aside, organization type, or point of contact. The system was unable to retrieve details about the prime contract or any associated subcontractor or supplier opportunities, leaving the scope, requirements, and eligible participants undefined. Interested parties may access the official listing through the provided DIBBS link for potential updates or additional context.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4416
The contract specifies the procurement of 20 mg extended-release omeprazole capsules in 90-count bottles, identified by NSN 6505016247068 and manufacturer part number NDC00781-2868-92 from Sandoz Inc. Each unit must be packaged in commercial-grade sealed containers that protect against damage, with outer shipping containers ensuring safe, low-cost delivery to listed government destinations under FOB destination terms. A minimum of 21 months of shelf life must remain at delivery, with a total shelf life of 24 months that is non-extendable. All packaging, labeling, and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The product is regulated by the FDA and requires pre-award referral for confirmation. Shipments must use traceable transportation methods and explicitly prohibit parcel post. Deliveries are scheduled across multiple CLINs totaling 57 units, with a mandatory delivery window of five days and no variance allowed in quantity. All items must be labeled and stored at controlled room temperature, with packaging materials and methods governed by DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Shipping addresses include military facilities at Fort Bragg, North Carolina, and APO AP, with required point-of-contact and program tracking information provided for government use.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SURGICAL PACK, DISPOSAB
Solicitation # SPE2DH-26-T-5695
The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.
Family Planning Centers

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325413
New
DIBBS
CHIP, HYDROGEN PEROX
Solicitation # SPE2DS-26-T-300S
The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDE
Solicitation # SPE2DS-26-T-301A
The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.
Family Planning Centers

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-300U
The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details