Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MASK, RESPIRATOR

Active
SPE2DS-26-T-302CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of N95 disposable particulate respirators, with each case containing eight boxes of twenty respirators, totaling 160 units per case, all sized medium. The unit of issue is a box of 160, and the item carries a non-extendable shelf life of ten months under the RS001 requirement for Type I (Code V) items. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The bidder must clearly state the source and part number being offered. The item is identified by NSN 6515-01-496-0916, with a single box requested under purchase request 7017703026. Delivery is required within 20 days of award. The solicitation, issued under SPE2DS-26-T-302C on August 3, 2026, with a response deadline of August 10, 2026, falls under NAICS code 326299 and is managed by the Department of Defense’s Medical Supply Chain. Covered defense information provisions may apply, and the procurement is part of a federal acquisition process.

General Info

Procure N95 respirators, medium, 160 per box, NSN 6515-01-496-0916, delivery in 20 days, 10-month shelf life.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-302C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
MASK,RESPIRATOR
MASK,RESPIRATOR
N95 DISPOSABLE PARTICULATE RESPIRATOR, CASE CONTAINS 8 BOXES OF 20
RESPIRATORS EACH FOR A TOTAL OF 160 RESPIRATORS PER CASE, SIZE MEDIUM
UNIT OF ISSUE: BOX/160EACH
..
RS010: Shelf-life requirement RS001 for a TYPE I (CODE V) item with a shelf life of 10 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-496-0916 Quantity: 1 BX Purchase Request: 7017703026QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
Supply of Nitrile Patient Examining GlovesThe contract calls for the supply of heavy-gauge, black, latex-free, powder-free nitrile exam gloves in large size, specifically designed to meet the rigorous physical and operational demands of special-forces missions. These gloves must satisfy stringent performance criteria including enhanced durability, puncture resistance, and tactile sensitivity, ensuring they remain intact and functional under extreme environmental and stress conditions encountered during tactical operations. The product must comply with all applicable military and medical standards for personal protective equipment without compromising dexterity or comfort during prolonged wear. The solicitation is issued under the NAICS code 326299 for other plastic product manufacturing and is classified as a subcontract within the Department of Defense's Medical Supply Chain structure. Responses are due by August 10, 2026, and the place of performance is designated as Fort Lewis, Washington, with a zip code of 98433-9500. The contract is posted on the DIBBS platform under solicitation number SPE2DS26T298L, and suppliers must ensure full adherence to technical specifications, quality control protocols, and delivery timelines to qualify for award. The gloves are intended for direct issue to operational units requiring reliable, high-performance protective gear in mission-critical scenarios.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Medical Biohazard Disposal Bags SupplyThe contract is for the supply of sterile, biohazard-rated disposal bags designed to meet federal and OSHA standards for the safe containment of medical waste. These bags must comply with stringent regulatory requirements to ensure safe handling, transport, and disposal of infectious or potentially infectious materials in healthcare and clinical settings. The solicitation is issued as a subcontract under the NAICS code 326299, indicating it falls under other plastic product manufacturing, and is managed by the Department of Defense through the Medical Supply Chain FSH. Bids must be submitted by August 10, 2026, with the opportunity posted on August 2, 2026. There is no set-aside designation specified, meaning all eligible contractors may respond regardless of business size or category. Place of performance and point of contact details are not provided, but the procurement is accessible via the DIBBS platform for further inquiry and submission.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Medical Disposal Container SupplyThe contract seeks the supply of medical-grade plastic containers specifically designed for the safe disposal of hypodermic needles and syringes, with mandatory compliance to federal and military standards. These containers must meet stringent safety and durability requirements to ensure secure handling and containment of sharps waste in military medical environments. The procurement is issued as a subcontract under the NAICS code 326299, targeting vendors capable of delivering products that align with Department of Defense specifications for biomedical waste management. Performance of this contract is required at Fort Hood, Texas, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contracting activity is managed under the Medical Supply Chain FSH, reflecting the Department of Defense’s operational need for reliable, compliant disposal solutions across its medical facilities. All submitted proposals must demonstrate full adherence to regulatory guidelines, and the vendor selected will supply containers destined for use in active-duty medical settings, emphasizing safety, functionality, and consistent quality under operational conditions.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Supply of Plain Seals for DoD ContractThe contract obligates the supplier to provide twelve units of 'SEAL, PLAIN' that fully comply with MIL-DTL-117, Type II, Class C, Style 1 specifications, ensuring they meet rigorous military performance and durability standards. Each unit must be packaged with UV-protective materials and preserved according to established military guidelines to maintain integrity during storage and transit. The items are intended for use by the Department of Defense and must be delivered to the designated place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract is structured as a subcontract under NAICS code 326299, indicating it pertains to other rubber product manufacturing, and is managed through the Land Supplier Operations Vehicle Support division of the Department of Defense. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, requiring all proposals to be submitted prior to the close of business on that date.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 326299
New
DIBBS
Lens Paper Supply (Type 1, Class 5, Wet-Use Compatible)The contract mandates the supply of two packages totaling 100 sheets of 4-inch by 6-inch lens paper meeting Type 1, Class 5 military specifications for wet-use applications, identified by NSN 6640-01-459-4239. All materials must be delivered to the USS STERETT DDG 104 within 20 days of award, ensuring strict compliance with military-grade standards for durability and performance under wet conditions. The item falls under NAICS code 326299 and is procured as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at FPO, zip code 96678. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with no set-aside classification specified.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Supply of Autoclavable Y-Type Tubing Connectors for Medical UseThe contract specifies the manufacture and delivery of Y-type, barbed tubing connectors with a 0.5-inch inner diameter, constructed from autoclavable polypropylene to withstand repeated sterilization under high-temperature and high-pressure conditions. These components must be supplied in dozens and fully compliant with applicable DLA, medical, and defense standards to ensure reliability and safety in critical healthcare and military environments. The product is intended for use in medical systems where precise fluid routing and durability under sterile conditions are essential. Issued as a subcontract under the Department of Defense’s Medical Supply Chain, the solicitation is active with a response deadline of August 10, 2026, following a posting date of August 2, 2026. The North American Industry Classification System code 326299 identifies the category as other plastic product manufacturing, indicating the specialized nature of the production process. While no specific performance location or point of contact is provided, the requirement is part of a broader defense and medical supply initiative, necessitating strict adherence to quality, material specifications, and packaging protocols to support operational readiness and clinical applications.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
FLOAT, BALLOON
Solicitation # SPE7L4-26-T-5948
The contract pertains to the procurement of 50 units of FLOAT, BALLOON under solicitation SPE7L4-26-T-5948, with a response deadline of August 13, 2026, and delivery required within 84 days after award. The item is classified under NAICS code 326299 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament organization, with performance located in San Diego, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning unauthorized disclosure—包括 to foreign nationals within the U.S.—is prohibited without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completion of required DLA export control training, and formal approval from DLA may access the controlled data. The point of contact for inquiries is Kristen Elliott, reachable via email and phone listed in the contract details.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
BELT, POSITIVE DRIVE
Solicitation # SPE7L1-26-T-906F
This contract is for the procurement of three positive drive belts with NSN 3030-01-684-9068 and part number 110258B083, supplied by Quincy Compressor Division. The item must be delivered within five days of order placement, FOB origin, with no tolerance for quantity variance. Delivery is required to Fort Eustis, Virginia, with specific shipping instructions prohibiting parcel post and requiring the fastest traceable means. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings. The item is to be palletized in accordance with DLA packaging requirements and shipped via designated government logistics channels. The contract references technical and quality standards from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The purchase request number is 7017643816, the unit price is $3.00 per unit, and the total contract value is $9.00. The required delivery date is July 29, 2026, and the solicitation was issued on August 2, 2026, with responses due by August 13, 2026. Point of contact is Kristina Derry from the Department of Defense’s Land Supply Chain, and all data is governed under the DIBBS system. Government use codes and tracking identifiers are included for internal logistics and accountability purposes.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
BELT, V
Solicitation # SPE7L1-26-T-905X
The contract pertains to the procurement of one belt, V, with NSN 3030-01-539-5803 and part number 5690208, supplied by CUMMINS INC. The item is to be delivered FOB destination within 20 days of contract award with no variance allowed in quantity. Packaging must conform to MIL-STD-2073-1E, with specific methods including preservation type 33, drying method C, and no cushioning or dunnage. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. Delivery is directed to Naval Mobile Construction Battalion Seabee Camp Shields in FPO AP 96370-0060, with freight shipping instructions referencing DLA procedures C19 and C20. The contract identifies the purchase request number and includes government use codes for tracking. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE7L1-26-T-905X, issued on August 2, 2026, with a response deadline of August 13, 2026. The NAICS code is 326299, under the Department of Defense’s Land Supply Chain, and the primary point of contact is Christopher Bohnker.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
Supply of Solid Tires (NSN 2630016528196)The contract involves the procurement and delivery of two solid tires with National Stock Number 2630016528196, manufactured to meet commercial specifications rather than military-specific standards. Delivery is scheduled under FOB Destination terms, meaning the supplier is responsible for all costs and risks until the tires arrive at Fort Campbell, Kentucky, the designated delivery point. The contract falls under the NAICS code 326299, which pertains to other rubber product manufacturing, indicating it is not limited to specialized defense contractors. It is classified as a subcontract and is administered by the Defense Logistics Agency under the Department of Defense, though no solicitations or set-asides are specified. The posting date is listed as August 1, 2026, suggesting this is a future procurement action. The contract’s official reference is SPE7LX26F86A9, linked to the broader award SPE7LX19D0029, with no point of contact or geographic details beyond the delivery location provided.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 326299
New
DIBBS
Cushioning Pad SupplyThe contract involves the supply of 40 commercial off-the-shelf cushioning pads with the National Stock Number 2590011891059, packaged and labeled to standard specifications for delivery to DLA Distribution Red River. These items are classified under NAICS code 326299, indicating they are part of other rubber product manufacturing, and are being procured under a subcontract arrangement through the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on July 31, 2026, and although no specific solicitation number or set-aside details are provided, the delivery location and item specifications are clearly defined to ensure compliance with military logistics standards. The contract is managed through the DIBBS system with a reference link tied to award record SPE7LX23DP005 and delivery order SPE7LX26FZ933.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 326299
New
DIBBS
Rubber Strip Manufacturing & SupplyThe contract requires the manufacture and delivery of six units of rubber strip identified by NSN 5330-20-001-9814, fully compliant with military specification MIL-DTL-117 and all applicable DLA technical requirements. The product must meet rigorous performance, material, and dimensional standards expected for military-grade components, ensuring reliability and durability under operational conditions. The order is positioned as a subcontract under the NAICS code 326299, indicating it falls under other rubber product manufacturing, and is being procured by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization for performance at Tracy, California, with a ZIP code of 95304-5000. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, allowing potential suppliers a seven-day window to submit bids. The contract is not subject to any specific set-aside designation, meaning it is open to any qualified vendor regardless of business size or type. The procurement is managed through the DLA’s DIBBS system, and all submissions must be made via the provided online portal. Although no point of contact is listed, bidders are expected to adhere strictly to the technical and submission guidelines associated with the NSN and military specification to ensure eligibility and compliance.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.
Family Planning Centers

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325413
New
DIBBS
CHIP, HYDROGEN PEROX
Solicitation # SPE2DS-26-T-300S
The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDE
Solicitation # SPE2DS-26-T-301A
The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.
Family Planning Centers

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-300U
The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details