Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Masonry Work

Active

State & Local

Response Deadline09/30/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for masonry work involves the installation of concrete masonry units for prime contractors on FAA interior fit-out projects within Lehigh County, Pennsylvania. The scope of work includes laying CMU, applying mortar and grout, and installing steel reinforcing bars, masonry-joint reinforcement, and embedded flashing to deliver completed masonry walls. The opportunity is categorized under NAICS code 238140 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 30, 2026, at 4:00 PM.

General Info

Masonry subcontract for FAA interior fit-out projects in Lehigh County, Pennsylvania.

Agency

Pennsylvania → Lehigh CountyView Agency

NAICS

238140 - Masonry ContractorsView NAICS

Place of Performance

Lehigh County, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026 Diesel Fuel RFP.

The full solicitation package (23 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2025 RFP for Janitorial Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 04:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyPennsylvania → Lehigh County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Pennsylvania → Lehigh County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs concrete masonry units (CMU) for prime contractors on FAA interior fit-out projects. Lays CMU, applies mortar and grout, and installs steel reinforcing bars, masonry-joint reinforcement, and embedded flashing. Delivers completed masonry walls.

Similar Contracts

Same NAICS industry code

B4211 Repair Building Damage

Solicitation # N400857584739

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

Masonry Restoration & CleaningThis subcontract for Masonry Restoration and Cleaning involves providing specialized cleaning, repair, and repointing services for brick and marble masonry on City of Cambridge facility projects. The selected provider will work under prime contractors to remove atmospheric deposits from brick, replace damaged masonry units, and repoint joints using cement-lime mortar. To ensure quality and safety, the scope includes performing trial cleaning tests and conducting pH testing on wall surfaces and runoff to deliver fully restored facades. The opportunity is managed by the Massachusetts Purchasing agency under NAICS code 238140. Interested parties must submit their responses by the deadline of November 5, 2026, following the posting date of September 17, 2026. Detailed project information and submission portals are available through the OpenGov procurement link.

POSTED

about 21 hours ago

DEADLINE

in about 2 months

Masonry Restoration and Repair

POSTED

about 21 hours ago

DEADLINE

Rock Bolt InstallationThis subcontract for the Department of the Interior's NPS Conops Strategic DOI involves the manufacture and installation of 14 rock bolt anchors for National Park Service tunnel projects. The scope of work includes cutting and assembling metal to specific requirements, drilling and installing anchors using grout, and tensioning bolts to a lock-off load of 10 kips. Technical specifications require the use of one inch diameter threaded galvanized rebar, bearing plates, and a combination of fast-set and slow set resins. The project is designated as a total small business set aside under NAICS code 238140. Interested parties must respond by October 30, 2026, following the posting date of September 17, 2026.

Nps Conops Strategic DOI

POSTED

DEADLINE

in about 1 month

Clowes Weir Reconstruction - Rideau Canal National Historic Site of Canada

Solicitation # 5P468-26-0042/A

Parks Canada is seeking bids for the Clowes Weir Reconstruction at the Rideau Canal National Historic Site of Canada. The project involves comprehensive repairs to masonry walls and upstream wing walls, as well as repairs to the concrete apron and the replacement of steel log gains and other structural elements. The estimated value of the project exceeds 5,000,001 dollars, excluding taxes, and all work must be completed by May 30, 2028. This solicitation follows a two-submission procedure and requires contractors to provide a plan for socioeconomic benefits for Indigenous people and businesses in the contract area. Bids must be submitted exclusively via email to soumissionsami-bidsrpc@pc.gc.ca or by fax to 1-855-983-1808, as submissions via SAP Ariba, courier, or in-person will not be accepted. Email attachments must not exceed 15 megabytes, and any links to documents are prohibited. An optional site visit is scheduled for September 18, 2026, at 10:00 am EDT in Merrickville, requiring confirmation and certification 48 hours in advance. All technical and contractual inquiries must be submitted in writing to the Contracting Authority at least two calendar days before the closing date.

Parks Canada Agency

POSTED

DEADLINE

Masonry & Concrete Unit Masonry

POSTED

DEADLINE

Masonry Contractor

TB001 - Town Hall

POSTED

DEADLINE

Melrose City Hall East Entrance Stair Repairs

Solicitation # BD-27-1155-COM01-COMCH-133540

The City of Melrose Public Works department has issued a solicitation for nonresidential building construction services specifically for the repair of the east entrance stairs at Melrose City Hall, located at 562 Main Street, Melrose, Massachusetts. This open market solicitation, identified by number BD-27-1155-COM01-COMCH-133540, was posted on September 16, 2026. The project requires specialized construction work to address the stair repairs at the specified municipal location. Prospective bidders must adhere to a strict timeline and submission process. A pre-bid walkthrough is scheduled for September 22, 2026, and all written inquiries must be submitted to the primary contact, Jennifer Rosa, by September 30, 2026. The procurement process requires sealed bids, as electronic submissions are not permitted. Subcontractor bids must be received by October 8, 2026, while general contractor bids are due no later than October 15, 2026. Administrative and technical coordination is managed by Jennifer Rosa and Elena Proakis Ellis, with Tina Bright serving as the contact for payment and invoicing.

COM01 - Public Works

POSTED

DEADLINE

Masonry and Block WorkThis subcontract opportunity with the Florida Department of Environmental Protection involves providing masonry and block installation services for prime contractors. The scope of work includes laying brick, concrete block, or stone according to specific project requirements to deliver completed masonry walls and structures. The project falls under NAICS code 238140 and was posted on September 16, 2026. Interested parties must submit their responses by the deadline of October 6, 2026.

Department of Environmental Protection

POSTED

DEADLINE

Unit Masonry InstallationThis subcontract for Unit Masonry Installation involves the construction of reinforced concrete masonry unit walls for facility projects within the City of San Clemente. The scope of work includes installing single-wythe walls, placing mortar and grout, and installing ASTM A 615 Grade 60 reinforcing steel in accordance with ACI 530.1/ASCE 6/TMS 602 standards. Additionally, the contractor is responsible for applying masonry cleaners to remove stains and ensuring all completed reinforced CMU walls meet project specifications. The project requires the contractor to maintain DIR registration and adhere to the specified technical standards for masonry and steel. Interested parties must submit their responses by the deadline of October 1, 2026. The work will be performed in San Clemente, California, under NAICS code 238140.

City of San Clemente

POSTED

DEADLINE

OCTA Wall Repairs Over Pedestrian Underpass

Solicitation # 17355

The City of San Clemente is soliciting sealed bids for Project No. 17355, which involves the demolition and replacement of two deteriorated CMU walls at a pedestrian underpass adjacent to the San Clemente Pier Train Station. The scope of work includes installing scaffolding, removing railroad rock ballast and utility conduit, installing 8-inch solid grouted CMU with stucco finish and tile caps, and reinstalling wood murals. The project must be completed within 60 working days from the Notice to Proceed, with critical coordination required for two 48-hour railroad closure windows in January 2027. Due to the location, the contractor must adhere to SCRRA rules, provide mandatory railroad flaggers for top-side activity, and maintain Railroad Protective Insurance. Eligible bidders must hold a Class A or B California contractor's license, possess five years of masonry and stucco experience, and be registered with the Department of Industrial Relations. Bids are due electronically via PlanetBids by 2:00 p.m. on October 1, 2026, and must include a bid bond of at least 10 percent of the maximum bid amount. The contract will be awarded to the lowest responsive and responsible bidder, with a 7 percent rating scale preference available for local vendors. The successful contractor will be required to provide a one-year warranty and a warranty bond of 25 percent. Payment will be issued through monthly progress payments, typically at 90 to 95 percent of the work performed.

City of San Clemente

POSTED

DEADLINE

Unit and Cast Stone MasonryThis subcontract for Unit and Cast Stone Masonry is issued by the Jackson County Board of Commissioners in Georgia. The selected contractor will be responsible for installing concrete masonry units, mortar, grout, and cast stone trim for correctional facility projects. Key technical requirements include the installation of steel reinforcing bars and masonry-joint reinforcement, as well as the fabrication and installation of cast stone window sills and trim units. The solicitation was posted on September 16, 2026, with a response deadline of October 15, 2026. Falling under NAICS code 238140, the contract focuses on the delivery of completed masonry walls and decorative cast stone trim to support prime contractors on these specific county projects.

Jackson County Board of Commissioners

POSTED

DEADLINE

More opportunities from Pennsylvania → Lehigh County

Same awarding agency

Earthwork & Site PreparationThis subcontract for Earthwork and Site Preparation involves performing excavation, grading, and site preparation for prime contractors on Pennsylvania DOT infrastructure projects within Lehigh County. The scope of work includes executing site grading and erosion and sedimentation control in accordance with ES-1 and ESD-1 plans, as well as preparing bearing surfaces to a capacity of 10.5 ksf while adhering to project Geotechnical Reports. The ultimate objective is to deliver a graded and prepared site ready for foundation pour. The opportunity is listed under NAICS code 238910 and was posted on September 17, 2026, with a response deadline of October 6, 2026. This project is managed through the Pennsylvania agency in Lehigh County.

Site Preparation Contractors

POSTED

about 21 hours ago

DEADLINE

Cast-In-Place Concrete FoundationsThis subcontract for Cast-In-Place Concrete Foundations involves performing forming and pouring services for prime contractors on PA DOT infrastructure projects within Lehigh County, Pennsylvania. The scope of work includes installing formwork according to ACI 301 standards, pouring and curing concrete to achieve an ACI 117 Class A finish, and installing vapor retarders. The contractor will utilize APA Structural 1 Plyform along with Portland cement, fly ash, or silica fume to deliver completed foundations. This opportunity is categorized under NAICS code 238110, with a response deadline of October 6, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 21 hours ago

DEADLINE

Concrete Reinforcing Supply & InstallationThis subcontract for Concrete Reinforcing Supply and Installation involves the provision and placement of steel reinforcement for prime contractors working on Pennsylvania Department of Transportation infrastructure projects within Lehigh County. The scope of work includes the installation of deformed steel bars and welded wire fabric for both precast elements and cast-in-place foundations, adhering to the CRSI Manual of Standard Practice and specific ASTM A615 Grade 60 and ASTM A185 standards. The opportunity is categorized under NAICS code 238110 and was posted on September 17, 2026. Interested parties must submit their responses by the deadline of October 6, 2026. The contract focuses on the delivery and installation of a complete reinforcing steel grid and bars to support critical infrastructure development in the region.

Poured Concrete Foundation and Structure Contractors

POSTED

about 21 hours ago

DEADLINE

Precast Concrete Culvert Fabrication & SupplyThis subcontract for Precast Concrete Culvert Fabrication and Supply involves the production and delivery of main culverts, wing walls, and headwalls with parapets for PA DOT infrastructure projects in Lehigh County. The contractor must utilize PA DOT Class AAA 4,000 psi concrete and apply membrane waterproofing, while incorporating specific cast-in-place metal sleeves and U-bolts into the components. To qualify, the provider must hold a Professional Engineer registration in Pennsylvania and provide certified test results verifying compressive strength. The contract requires the fabrication and final delivery of all completed precast components directly to the project site. Responses for this opportunity are due by October 6, 2026.

Ready-Mix Concrete Manufacturing

POSTED

about 21 hours ago

DEADLINE

Concrete Testing & InspectionThis subcontract for Concrete Testing and Inspection in Lehigh County, Pennsylvania, requires an independent agency to provide testing and inspection of concrete materials for prime contractors on PA DOT infrastructure projects. The selected provider must be qualified according to ASTM C1077 and ASTM E329 standards to verify compressive strength and slump using specialized equipment and deliver all necessary certified material test reports and compliance documentation. The opportunity was posted on September 17, 2026, with a response deadline of October 6, 2026. It falls under NAICS code 238110 and is managed through the Lehigh County agency within Pennsylvania.

Poured Concrete Foundation and Structure Contractors

POSTED

about 21 hours ago

DEADLINE

Blacksmith Road Culvert Replacement

Solicitation # Project # 396325.005

Weisenberg Township is soliciting sealed bids via the PennBid Program for the manufacture and delivery of a precast culvert to Blacksmith Road in Lehigh County, Pennsylvania, along with the preparation of a complete culvert foundation design for construction by the site contractor. The solicitation, classified under NAICS code 237310, requires bidders to submit all documentation electronically through PennBid no later than 2:00 PM on Friday, June 19, 2026, with bids accompanied by a bid bond equal to 10% of the total bid amount. The successful bidder must provide performance and payment bonds totaling 100% of the contract value, as well as a one-year maintenance bond equal to 10% of the awarded contract value upon substantial completion. All work is subject to prevailing wage rates as determined by the Bureau of Labor Law Compliance, and contractors must comply with stringent material specifications including PA DOT Class AAA concrete at 4,000 psi, ASTM A615 Grade 60 reinforcing steel, and membrane waterproofing per PDT Section 680, with design loading based on HS-25 and a bearing capacity of 10.5 ksf. Bidders must submit a properly executed EJCDC C-451 Contractor’s Qualification Statement, a notarized Non-Collusion Affidavit, an Equal Employment Opportunity Affidavit, and other required certifications affirming truthfulness of submissions and compliance with socioeconomic classifications. The contract documents include the Agreement, General and Supplementary Conditions, Specifications, Drawings, and Addenda, with payment procedures governed by Article 15 of the General Conditions using EJCDC C-620 forms for applications, submitted monthly with a schedule of values that details labor, materials, subcontractors, and change orders as percentages of the contract sum. Delivery of the culvert must occur between December 1, 2026, and February 1, 2027, with strict prohibition of on-site storage, and coordination with the site contractor is required to align with site readiness, which cannot begin until November 15, 2026, due to PA DEP permitting. The project timeline includes a Notice to Proceed on July 20, 2026, substantial completion by February 1, 2027, and final completion by March 1, 2027. A pre-bid meeting is scheduled for

Highway, Street, and Bridge Construction

POSTED

about 21 hours ago

DEADLINE

Concrete WorkThis subcontract for concrete work involves the installation of cast-in-place concrete for prime contractors on FAA interior fit-out projects within Lehigh County, Pennsylvania. The scope of work includes forming, placing, and finishing concrete for structural elements, curbs, and housekeeping pads, as well as the installation of bearing plates and anchor bolts to deliver completed concrete slabs and pads. The opportunity is categorized under NAICS code 238110 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 30, 2026, at 4:00 PM.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Selective DemolitionThis subcontract for selective demolition involves performing interior fit-out work for prime contractors on FAA projects within Lehigh County, Pennsylvania. The scope of work includes the removal of existing walls, ceilings, flooring, and fixtures in accordance with Section 02 41 19, with waste disposal managed per Section 01 74 19 to ensure the site is cleared and ready for new construction. The opportunity was posted on August 26, 2026, and requires a response by September 30, 2026, at 4:00 PM. Classified under NAICS code 238910, the project is managed through Lehigh County and is accessible via the PennBid portal.

Site Preparation Contractors

POSTED

DEADLINE

Electrical & CommunicationsThis subcontract for Electrical and Communications services involves the installation of electrical power, lighting, and communications cabling for prime contractors on FAA interior fit-out projects in Lehigh County, Pennsylvania. The scope of work includes installing low-voltage conductors, grounding, panelboards, LED interior and emergency lighting, and copper horizontal cabling in accordance with Divisions 26 and 27 to ensure the delivery of fully operational electrical and data systems. The opportunity is categorized under NAICS code 238210 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 30, 2026, at 4:00 PM.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

HVAC SystemsThis subcontract for HVAC Systems in Lehigh County, Pennsylvania, involves the installation of mechanical HVAC systems, ductwork, and equipment for prime contractors on FAA interior fit-out projects. The scope of work includes the installation of metal and flexible ducts, centrifugal fans, split-system AC, refrigerant piping, and insulation, culminating in the delivery of a fully operational system. The contractor is responsible for performing Testing, Adjusting, and Balancing in accordance with section 23 05 93. This opportunity is categorized under NAICS code 238220, with a response deadline of September 30, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Plumbing SystemsThis subcontract for Plumbing Systems involves the installation of domestic water and sanitary waste piping systems for prime contractors on FAA interior fit-out projects in Lehigh County, Pennsylvania. The scope of work includes the installation of domestic water piping, sanitary waste and vent piping, valves, hangers, and plumbing piping insulation in accordance with Division 22 to deliver a fully operational plumbing system. The project falls under NAICS code 238220 and is managed by Lehigh County. Interested parties must submit their responses by the deadline of September 30, 2026, at 4:00 PM.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Specialties & FurnishingsThis subcontract for Specialties and Furnishings involves the supply and installation of interior specialties and furniture for prime contractors working on FAA interior fit-out projects. The scope of work includes the installation of panel signage, stainless-steel toilet compartments, bath accessories, fire extinguishers, plastic-laminate casework, solid surface countertops, and general furniture. The project is located in Lehigh County, Pennsylvania, and falls under NAICS code 238390. Interested parties must submit their responses by the deadline of September 30, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS