Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

MAST

Active
SPE7M5-26-T-488LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7M5-26-T-488L and issued by the Department of Defense Active Devices Division, seeks quotes for the procurement of four units of NSN/Part Number 5985-01-610-0882 under NAICS code 334220. The delivery requirement is set for 168 days after the order is placed. The procurement is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates including DLA packaging requirements, the removal of government identification from non-accepted supplies, and compliance with Covered Defense Information regulations. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific verification levels and AQLs assigned to critical, major, and minor attributes. Alternate offerors are required to provide a complete data package for both approved and alternate parts. The solicitation incorporates the Buy American Act and Berry Amendment and requires submissions via the DIBBS system by the deadline of September 21, 2026. Performance is designated for New Cumberland, Pennsylvania.

General Info

DoD seeks quotes for four NSN 5985-01-610-0882 units by September 21, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-488L Request for Quotations

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
MAST
MAST
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5985-01-610-0882 Quantity: 4 EA Purchase Request: 7018270287QTY: 4 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
Federal
Procurement of High Frequency Radio Equipment and Antennas
Solicitation # W90VN726QA017
Solicitation W90VN726QA017 is a firm-fixed-price request for quotes to procure a complete High Frequency (HF) radio communications package for Kunsan Air Base in the Republic of Korea. The objective is to establish a resilient beyond-line-of-sight communication capability that operates independently of satellite or fiber infrastructure. The required equipment includes an AN/PRC-160 (V)1 HF manpack radio assembly, an RF-7800H-TM003 signal amplifier adapter case, an RF-382A-15TM antenna coupler system, and an RF-1941 HF dipole antenna, along with all necessary cabling, connectors, and grounding equipment. The contract requires delivery to a Government depot in Tracy, California, by June 30, 2027, with a specified lead time of 254 calendar days from the date of award. While delivery occurs in California, final inspection and acceptance will be conducted by the Government at Kunsan Air Base, Korea. The contractor is responsible for all transportation costs and must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-130 for unique item identification using two-dimensional data matrix symbology. Payment will be made NET 30 days following the later of invoice receipt or material acceptance in Korea, with all invoicing processed electronically via Wide Area Workflow. Award will be granted to the responsible offeror whose proposal is most advantageous to the Government, based on price and other considered factors. Offers must be submitted by September 18, 2026, and must strictly adhere to the specified brand and model requirements for the radio and antenna components.
0906 Aq Co Det B Contracti

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
Federal
Hexa-band digital data link radio module
Solicitation # W911S226U4473
Solicitation W911S226U4473 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new Hexa-band digital data link radio modules. This is a Total Small Business Set-Aside under NAICS code 334220. The government is seeking equipment that is either the Microhard Part Number pMDDL1624-SWP or an equal alternative. To be considered, equal products must meet all salient characteristics, including NDAA compliance, 2X2 MIMO software-selectable capabilities, DFS/OFDM and FHSS modes for anti-jamming, a minimum data throughput of 21Mbps, and support for point-to-point, mesh, and multipoint topologies. Technical specifications require AES-256 encryption and an operating temperature range of -40 to +85 degrees Celsius, with frequency coverage spanning multiple bands from 1625 MHz to 2500 MHz. Quotes must be submitted exclusively through the PIEE Solicitation module and must include a datasheet or specifications document, as well as a completed certification of the country of origin. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required on an F.O.B. destination basis, with a preferred delivery timeframe of within 30 days. Payment terms are Net 30, utilizing electronic submission via Wide Area Workflow. All provided equipment must be new, as used or remanufactured products will be rejected.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7M5-26-U-0065
Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-455B
Solicitation SPE7M5-26-T-455B, issued by DLA Land and Maritime Active Devices Division, is a request for quotations for four linear microcircuits, identified by NSN 5962012477674 and part number HI1-5047A/883 from Renesas Electronics America Inc. The procurement is for a critical application item and is categorized as a commercial item. Delivery is required within 143 days, with a need ship date of February 2, 2027, and a final required delivery date of July 1, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The contract imposes stringent quality and technical requirements, including CMMC Level 2 self-assessment and strict supply chain traceability. Contractors must provide DLA Land and Maritime Form 918 and associated traceability or test reports at least 15 days prior to the delivery date to receive shipping authorization. Packaging must adhere to MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, with specific cushioning requirements per A-A-59136 to prevent lead damage. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware and must comply with the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal by September 11, 2026.
Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS