Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Material Handling Equipment Supply and Packaging

Active

International

Response Deadline09/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of new material handling equipment to two Canadian Forces depots located in Edmonton and Montréal, with all items required to be packaged and labeled in full compliance with applicable standards. Delivery must be completed under DDP terms, meaning the vendor assumes all costs and risks until the equipment is fully delivered and cleared at the designated depot locations. The equipment must meet operational and safety specifications suited for military use, and packaging must ensure protection during transit while facilitating efficient unloading and inventory management upon arrival. The contract is classified as a subcontract under NAICS code 333924, and it is issued by the Department of National Defence on behalf of the Government of Canada. The solicitation was posted on July 31, 2026, with a firm response deadline of September 15, 2026, at 7:00 p.m. Eastern Time, and interested parties must submit their proposals through the Canada Buys portal by the stated deadline to be considered.

General Info

Supply military material handling equipment to Edmonton and Montréal depots under DDP terms by September 15, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery ManufacturingView NAICS

Place of Performance

Edmonton, Montréal, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 15

Submission deadline

Response Deadline

09/15/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of new material handling equipment with compliant packaging, labeling, and DDP delivery to two Canadian Forces depots.

Similar Contracts

Same NAICS industry code

Public Safety and Emergency Services - Request for Quotes - FSCC Electric walk behind counterbalance stacker

Solicitation # AB-2026-05469

Public Safety and Emergency Services is seeking quotes for the procurement of one electric walk-behind counterbalance stacker under solicitation number AB-2026-05469, which was posted on July 31, 2026. The requirement is specifically for equipment to support operational needs within the agency, and responses must be submitted by August 11, 2026, at 8:00 PM MT. The place of performance is in Alberta, and all bids must meet the technical and operational specifications implied by the equipment description. The primary point of contact for inquiries is Stephen Katabula, Procurement Officer, reachable via email at pses.procurement@gov.ab.ca or by phone at the provided number. This solicitation is open to qualified vendors, with no set-aside provisions indicated, and all submissions should follow the standard federal procurement guidelines applicable to Alberta government procurement processes.

Public Safety and Emergency Services

POSTED

DEADLINE

Cake Handling and Material Conveyance SystemsThe contract involves the design and supply of specialized systems for handling dried biosolids cake, including conveyors, silos, load-out systems, and dust control equipment. The scope requires engineered solutions that ensure safe, efficient, and environmentally compliant material transport and storage, with emphasis on minimizing airborne particulates and maintaining operational integrity. The project is tied to infrastructure needs within Broward County, Florida, and targets a subcontracting opportunity under NAICS code 333924, which corresponds to industrial machinery manufacturing. All deliverables must meet technical specifications for performance, durability, and integration with existing facility systems. The solicitation was posted on July 31, 2026, with a formal response deadline set for August 7, 2026, allowing approximately one week for qualified vendors to submit proposals. The contract does not specify a set-aside status or small business preferences, and no point of contact details are provided in the data. The place of performance is in Broward County, though exact location details are not included. Interested parties should access the official opportunity page via the provided link to review requirements, technical criteria, and submission guidelines before the closing deadline.

POSTED

DEADLINE

Crane and Material Handling Equipment InstallationThe contract titled Crane and Material Handling Equipment Installation involves the supply, installation, and commissioning of mobile or fixed cranes, conveyor systems, or front-end loaders designed to facilitate the transfer of aggregate materials between railcars, trucks, and stockpiles. This subcontract is issued by the Florida Department of Transportation under NAICS code 333924 and is open for bids with a response deadline of August 31, 2026. The work is intended to enhance material handling efficiency at transportation-related facilities, though specific location details for performance are not provided. The contract seeks equipment capable of reliable, high-volume operations in demanding environments, supporting the state’s infrastructure logistics needs. Bidders must be prepared to deliver fully integrated systems that meet operational and safety standards for continuous industrial use.

Florida Department of Transportation

POSTED

DEADLINE

Manufacture of Motor Vehicle LiftsThe contract requires the full manufacturing of five military-grade motor vehicle lifts with National Stock Number 4910-01-694-6886 and part number BPW-10-4-AJ, all of which must meet strict Department of Defense technical standards and be designated as Critical Application Items due to their essential role in military operations. The work is subject to stringent quality and compliance controls, and the product must be produced in accordance with DLA specifications to ensure operational readiness and safety under demanding field conditions. The solicitation is restricted to Service-Disabled Veteran-Owned Small Businesses, reflecting a federal preference aimed at supporting eligible veteran-owned enterprises through a set-aside process classified under NAICS code 333924. The contract opportunity was posted on July 30, 2026, with responses due by August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The procurement falls under the Land Supplier Operations Vehicle Support organization within the Department of Defense, signaling its alignment with ground vehicle support logistics. Although no point of contact or specific office address is listed, the official solicitation can be accessed via the DIBBS portal using the provided link. This is a subcontract opportunity, meaning the winning entity will likely deliver the lifts to a prime contractor or directly to a military logistics channel for final integration and deployment.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A7-26-T-603J

This contract, issued under solicitation SPE4A7-26-T-603J by the Defense Logistics Agency, mandates strict compliance with technical, quality, and export control requirements for the procurement of one unit identified by NSN/Part Number 0001S00000052. All technical and quality stipulations are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with verification levels or AQLs assigned per criticality: VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor attributes, unless otherwise directed. Measuring and test equipment must be qualified, and one sample must be submitted within 90 days of award to the designated address. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly authorized by specification. Export control of technical data is governed by ITAR or EAR, restricting dissemination to foreign persons without authorization, and DFARS 252.225-7048 applies. Access to controlled data is limited to contractors with approved US/Canada JCP certification, completed DOD export control training, and DLA authorization. The delivery window is 772 days from award, with performance scheduled at New Cumberland, Pennsylvania, and the point of contact is Renee Bynum at DLA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PAD, MISSILE HANDLING

Solicitation # SPE4A7-26-T-601R

The contract pertains to the handling of missile-related hardware identified by NSN 1450-01-054-3934, with a quantity of 108 units, under purchase request 7015926091, requiring delivery within 39 days after award. The item involves technical data subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure, transfer, or access by foreign persons regardless of location. Compliance mandates adherence to DFARS 252.225-7048, restricting access solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on export-controlled technical data handling, and have passed the DLA Export-Controlled Technical Data Questionnaire. Access is further contingent upon explicit approval by the DLA controlling authority. The solicitation number is SPE4A7-26-T-601R, posted on July 30, 2026, with responses due by August 7, 2026, under NAICS code 333924, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The place of performance is New Cumberland, Pennsylvania, 17070-5002, with Wendy Jones serving as the primary point of contact for inquiries.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

FORKLIFT EMBASSY COMPOUND

Solicitation # PR16159859

The U.S. Embassy in Bogotá seeks a brand-new 2.5-ton counterbalanced forklift equipped with dual fuel capability (LPG/Gasoline), rated for a load capacity of 2,500 kg with a 600 mm load center, and featuring a FSV mast with a maximum lift height of 5,000 mm and collapsed height of 2,245 mm. The equipment must have 1,220 mm forks, solid front and rear wheels, and an aisle width requirement of 4,165 mm. Mandatory special features include sideshift, strobe and blue spot lights, a fire extinguisher with bracket, multi-display operator presence sensor with seatbelt sensor, and System of Active Stability to reduce tipping risks. The forklift must be delivered in Bogotá within 90 days of purchase order acceptance under DDP Incoterms, with the vendor fully responsible for all import duties, customs clearance, logistics, and delivery costs. The U.S. Embassy will not provide tax exemptions or assist with importation processes, and all customs documentation must be filed under the official name “Embajada de los Estados Unidos de América.” Only vendors officially licensed to sell vehicles in Colombia are eligible to respond. The final invoice must name the U.S. Embassy as the buyer of record, and vehicles must be registered for diplomatic use through the Embassy’s Customs & Shipping Unit. For U.S. vendors, proposals must be submitted in USD and comply with DDP terms, while Colombian vendors must quote in COP. All offers must include detailed technical specifications, warranty terms covering the entire vehicle for five years, proof of local service support in Bogotá, evidence of financial capacity, industry experience, compliance with the NDAA provision regarding telecommunications equipment, and a signed certification acknowledging full understanding of delivery, payment, warranty, and service requirements. Proposals must be valid for three months, and all bidders must be registered in SAM.gov prior to award. Payment is by EFT within 30 calendar days after delivery and acceptance, with no advance payments permitted. All submissions must be emailed to BogotaGSOCompras@state.gov before the August 13, 2026 deadline.

US Embassy Bogota

POSTED

DEADLINE

W0127-25P029 - Ride-On Floor Scrubber

Solicitation # WS5504544649

This solicitation, numbered WS5504544649 and titled W0127-25P029 – Ride-On Floor Scrubber, is issued by the Department of National Defence through CFB Edmonton TEME Company, Base Transport Platoon, and is open exclusively to Canadian suppliers as defined in the solicitation’s annex. Only submissions from eligible Canadian vendors will be considered, in compliance with the Policy on Reciprocal Procurement. The requirement encompasses the full lifecycle services for a ride-on floor scrubber, including supply, delivery, offloading, assembly, testing, and proper disposal of all associated packaging and brush accessories. The solicitation was posted on July 30, 2026, and responses must be received by 7:00 p.m. Eastern Time on August 11, 2026; no late submissions will be accepted under any circumstances. The North American Industry Classification System code is 333924, and the contracting authority is Tanya Gostev of Public Services and Procurement Canada, reachable via email at tanya.gostev@tpsgc-pwgsc.gc.ca. The equipment is to be delivered and performed in Edmonton, Alberta.

Department of Public Works and Government Services

POSTED

DEADLINE

Heating Unit Manufacturer / SupplierThe contract seeks a manufacturer or supplier to provide two RETAINER, HEATING UN units that fully comply with military specifications and the National Stock Number 1450013612849. These units are critical components intended for defense applications and must meet exact technical and quality standards as defined by military requirements. The solicitation is issued as a subcontract under the NAICS code 333924, which categorizes it within the industrial machinery manufacturing sector, indicating the specialized nature of the production process. The Department of Defense, through its ASC SUPPLIER OPER AE AND AF DIV, is the overseeing agency, ensuring procurement aligns with defense operational needs. Responses are due by August 6, 2026, with the request posted on July 29, 2026, allowing potential vendors approximately one week to prepare and submit proposals. No set-aside designation is specified, meaning the contract is open to all eligible contractors regardless of business size or type. The place of performance and point of contact details are not provided, suggesting flexibility in delivery location or that logistics will be determined post-award. The official solicitation can be accessed via the DIBBS platform using the provided UI link, where detailed technical documentation and submission guidelines are expected to be available to interested parties.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RETAINER, HEATING UN

Solicitation # SPE4A7-26-T-600J

The contract pertains to the procurement of two retainers for a heating unit, identified by NSN 1450-01-361-2850, under solicitation SPE4A7-26-T-600J, with a delivery requirement of 20 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by the Defense Logistics Agency to handle such data, with DFARS 252.225-7048 governing compliance. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Lexus Henry as the primary point of contact, and bids must be submitted by August 6, 2026, under a federal procurement process with NAICS code 333924.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RETAINER, HEATING UN

Solicitation # SPE4A7-26-T-600G

The contract is for the procurement of two retainers, heating units, identified by NSN 1450013612849, under solicitation SPE4A7-26-T-600G, issued by the Department of Defense through the Defense Logistics Agency. The unit of issue is each, with a total quantity of two units required at a specified unit price, and the total price reflects this quantity. Delivery is required within 20 days of contract award, with FOB origin terms meaning the supplier is responsible for delivery to the origin point only. Inspection and acceptance both occur at origin, and the items must be packed according to MIL-STD-2073-1E with specific packaging methods including preservative treatment type 31, no clamping or drying, and no cushioning material. Packaging must comply with DLA’s RP001 palletization standards and marking requirements as per MIL-STD-129, with no special marking codes applied. The delivery destination is the Naval Supply Center in Jinhae-gu, Changwon-si, South Korea, under the NLC ROK Navy designation. Freight forwarding instructions reference DLA procedural notes C19 and C20, with multiple forwarders permitted. The required delivery date is August 8, 2025, and the contract was posted on July 29, 2026, with a response deadline of August 6, 2026. The primary point of contact is Lexus Henry of the ASC Supplier Oper AE and AF Division, reachable via phone and email. The item falls under NAICS code 333924 and is categorized as a federal solicitation with no set-aside designation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Airman Vertical Lift Wheel-Type Aerial Platform

Solicitation # FA5270-26-Q-M051

The U.S. Department of Defense, through the office FA5270 18 Cons Pk, is soliciting bids for the Airman Vertical Lift Wheel-Type Aerial Platform under solicitation number FA5270-26-Q-M051, posted on July 29, 2026, with a response deadline of August 10, 2026, at 3:00 a.m. Eastern Time. This combined solicitation targets suppliers capable of providing specialized aerial lift equipment classified under NAICS code 333924, intended for use at Yomitan Torii Station in Okinawa, Japan. The procurement is open to all eligible competitors without any specific set-aside classification, and deliveries must satisfy operational requirements at the designated overseas location. Primary point of contact for technical and procurement inquiries is Takeshi Nakamura, reachable at takeshi.nakamura.1.jp@us.af.mil or 315-634-4695, with Rose Napolitano serving as the secondary contact at rose.napolitano@us.af.mil or 315-634-4107. All proposals must be submitted through the SAM.gov platform using the provided UI link, and bidders are expected to comply with federal contracting regulations outlined in the full solicitation document. The contract will support critical aviation maintenance and safety operations at a U.S. Air Force installation in the Pacific region, requiring equipment that meets stringent performance, durability, and logistical compatibility standards for deployment in a forward-based environment.

FA5270 18 Cons Pk

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Quality Assurance and Inspection Readiness ServicesThe contract titled Quality Assurance and Inspection Readiness Services involves providing comprehensive support for Government Quality Assurance inspections conducted by the Department of National Defence, Government of Canada. This includes ensuring full access to contractor and subcontractor facilities, records, and test data to facilitate thorough and timely evaluations. The work is intended to maintain compliance with federal standards and readiness for inspections, with performance expected in Edmonton and Montréal. The solicitation is classified as a subcontract under NAICS code 541380, indicating it relates to other scientific and technical consulting services. Responses must be submitted by September 15, 2026, with the opportunity posted on July 31, 2026. There is no specified set-aside classification, and the contract will be managed under the broader procurement framework of CanadaBuys.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

International Logistics and DDP Delivery ServicesThe contract entails end-to-end logistics management for DDP shipments destined for military depots in Canada, encompassing full responsibility for customs clearance, payment of all duties and taxes, and final delivery to designated locations in Edmonton and Montréal. The provider must ensure seamless transportation from origin to destination under DDP terms, assuming all risks and costs associated with international movement, regulatory compliance, and import formalities under Canadian law. This subcontract is issued under NAICS code 488510 for support activities for air transportation and is part of the Government of Canada’s Department of National Defence logistics requirements, with proposals due by September 15, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

in about 1 month

Supply of Hydraulic Filters (Final Pressure)The contract is for the supply of hydraulic final pressure filters to Canadian Forces Supply Depots in Edmonton and Montreal, with delivery terms specified as Delivered Duty Paid, meaning the supplier is responsible for all costs and risks until the goods reach the designated locations. Government inspection rights are included, allowing the Department of National Defence to verify compliance with quality and specification requirements prior to acceptance. The contract falls under NAICS code 332996, indicating it pertains to other fabricated metal product manufacturing, and is classified as a subcontract under the Government of Canada's procurement framework. The solicitation was posted on July 31, 2026, with responses due by September 15, 2026, providing potential bidders a six-week window to prepare and submit proposals. The place of performance is clearly defined as the two supply depots, emphasizing the need for reliable logistics and timely delivery to meet military operational requirements.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

in about 1 month

Supply of Cooling System PumpsThe contract involves the procurement and delivery of engine cooling system pumps to Canadian Forces Supply Depots located in Montreal and Edmonton, with delivery terms governed by DDP Incoterms 2020, meaning the supplier is responsible for all costs and risks until the goods are delivered to the named destination. The tender is issued under the Department of National Defence on behalf of the Government of Canada, targeting suppliers with expertise in manufacturing and supplying specialized automotive and defense-related cooling components, as indicated by the NAICS code 333612. Bidders must submit responses by the deadline of September 15, 2026, with the opportunity posted on July 31, 2026, and the contract is classified as a subcontract under a broader government procurement framework. The place of performance is dual-location, requiring the supplier to coordinate logistics to meet the needs of both Edmonton and Montreal depots, ensuring full compliance with Canadian military specifications and delivery timelines without additional cost burdens to the Canadian Forces.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

in about 1 month

Controlled Goods Program (CGP) Compliance (Conditional)

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Quality Assurance and ISO 9001 Compliance Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Marking, and Transportation Logistics

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Resistance Elements (Electronics Components)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Canadian Content and Value-Added Compliance Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

UAS System Integration and Field Support

Engineering Services

POSTED

DEADLINE

UAS Operator and Maintainer Training Services

Other Technical and Trade Schools

POSTED

DEADLINE

Spare Parts Supply for UAS Platform

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE