Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Material Testing and Certification Services

Active

Federal

Response Deadline10/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Material Testing and Certification Services involves providing independent testing and validation of rubber tubing for prime contractors under DLA supply contracts. The scope of work requires verifying compliance with SAE AMS3216J and SAE AMS2810J standards, executing sampling plans according to MIL-STD-105/ASQ Z1.4, and confirming a wall thickness of .062. The selected provider must utilize precision calipers and laboratory equipment to conduct tensile and hardness testing, and must maintain ISO/IEC 17025 accreditation. The project is managed by the DLA Fleet Readiness Center Southeast under the Department of Defense, with performance located in Jacksonville, Florida. The contractor is responsible for delivering comprehensive test reports and certification data for CDRL-METALSCERT-26124. This opportunity falls under NAICS code 541380, with a response deadline set for October 9, 2026.

General Info

ISO 17025 accredited rubber tubing testing and certification for DLA in Jacksonville, Florida.

Agency

Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

NAICS

541380 - Testing Laboratories and Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPEFA3-27-T-0002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AMS3216 .500 ID .62 WT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 1

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent testing and validation of rubber tubing for prime contractors on DLA supply contracts. Verifies compliance with SAE AMS3216J and SAE AMS2810J, executes sampling plans per MIL-STD-105/ASQ Z1.4, and verifies .062 wall thickness. Utilizes precision calipers and laboratory equipment for tensile and hardness testing. Requires ISO/IEC 17025 accreditation. Delivers test reports and certification data for CDRL-METALSCERT-26124.

Similar Contracts

Same NAICS industry code

Production Lot Testing and Quality AssuranceThis subcontract, titled Production Lot Testing and Quality Assurance, involves performing critical production lot testing and inspections for prime contractors on Department of Defense aerospace projects. The scope of work focuses on verifying tolerances, pressure testing, and actuation cycles for NSN 1650-01-206-1949. To execute these tasks, the contractor must utilize specialized equipment, including coordinate measuring machines, pressure testing rigs, and actuation test benches, to deliver certified test reports and inspection results. Managed by the ASC Supplier OE and AF Div under the Department of Defense, the contract requires the provider to maintain AS9100 or ISO 9001 quality management systems. The opportunity was posted on October 5, 2026, with a response deadline of November 7, 2026. It is categorized under NAICS code 541380, emphasizing the technical testing and quality assurance nature of the requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Turbine Inspection and Non-Destructive Testing (NDT)This subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves specialized inspection and non-destructive testing of manufactured turbine parts for US Air Force E-3 platform projects. The scope of work includes performing X-ray, ultrasonic inspection, and pressure testing using precision measurement tools to ensure part integrity. The selected provider must deliver comprehensive inspection reports and certified pass/fail documentation. To qualify for this engagement, contractors must hold NADCAP accreditation and possess AS9100 or specific Department of Defense inspection certifications. The opportunity was posted on October 5, 2026, with a response deadline of October 13, 2026, falling under NAICS code 541380.

Ok DLA Aviation At Oklahoma City

POSTED

about 10 hours ago

DEADLINE

Production Lot Testing (PLT) and First Article Testing (FAT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

B533--VANIHCS SPS Water Testing (VA-27-00000760)

Solicitation # 36C25027R0012

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Geotechnical and Environmental Engineering, Testing, and Inspection ServicesThe NASA Jet Propulsion Laboratory is seeking a contractor to provide geotechnical and environmental engineering, testing, and inspection services. This project is based in Pasadena, California, and falls under NAICS code 541380. The contract is designated as an A&E Board award with a period of performance extending through May 26, 2025. There are currently no additional options listed for this engagement.

NASA Jet Propulsion Laboratory

POSTED

DEADLINE

Asbestos Bulk Sample AnalysisThis subcontract involves providing specialized laboratory testing and analysis of asbestos-containing materials for prime contractors working on Wrexham County Borough Council projects. The selected provider will be responsible for receiving bulk samples collected from site surveys and utilizing accredited laboratory facilities to identify the specific type and concentration of asbestos present. A mandatory requirement for this contract is UKAS accreditation to ensure all testing meets national standards. The primary deliverable is the provision of certified analytical test reports for all processed bulk samples. Interested parties must submit their responses by the deadline of November 13, 2026.

Wrexham County Borough Council

POSTED

DEADLINE

in about 1 month

Asbestos Survey and Analytical Works for Wrexham County Borough Council

Solicitation # Proc 26-48

Wrexham County Borough Council is seeking a single contractor for Asbestos Surveys and Analytical Works across all council-owned or managed buildings, including private properties under council responsibility such as local lettings. The contract, identified as Proc 26-48, has an estimated value of 600,000 GBP excluding VAT. The scope of work includes domestic and public building reinspections under CAR2012 Reg 4, demolition and refurbishment surveys, bulk sampling, air testing, water absorption testing, site supervision of removal works, consultancy, and asbestos awareness training. The agreement is set for an initial four-year term from February 1, 2027, to January 31, 2031, with a possible two-year extension based on satisfactory performance. The procurement process utilizes a weighted scoring system where quality accounts for 60 percent and price accounts for 40 percent of the evaluation. To ensure compliance with The Control of Asbestos Regulations 2012, the successful contractor and any affiliated organizations within the same business group are strictly prohibited from bidding on the separate asbestos removal services contract. Additionally, the council prohibits the use of subcontractors, requiring the contractor to deliver all services directly. The selected provider must offer a flexible and scalable service to accommodate fluctuating demand. Tenders must be submitted via the etenderWales portal by November 13, 2026.

Wrexham County Borough Council

POSTED

DEADLINE

in about 1 month

Specialized Testing and CommissioningLexington County School District One is seeking a subcontractor for specialized testing and commissioning services for its facility projects. The selected provider will be responsible for performing special inspections, testing, and system commissioning for prime contractors to ensure all new systems meet building code compliance. Key deliverables include the submission of detailed testing reports, commissioning logs, and official certifications of compliance. Qualified candidates must possess professional engineering licenses or certified inspection credentials to perform the work. This opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of November 2, 2026.

Lexington County School District One

POSTED

DEADLINE

Material Testing and Quality ControlThis subcontract for Material Testing and Quality Control supports the City of Lathrop Department of Public Works by providing independent testing of materials and construction for prime contractors. The selected agency will be responsible for conducting material sampling and tests using specialized soil and concrete equipment, culminating in the delivery of detailed material test reports and a final inspection report necessary for project closeout. Qualified candidates must hold the required testing agency certifications to perform these services in Lathrop, California. Interested parties must submit their responses by October 20, 2026, in accordance with the solicitation posted on October 2, 2026.

City of Lathrop

POSTED

DEADLINE

Materials Testing and Special Inspection ServicesThis subcontract for Materials Testing and Special Inspection Services supports prime contractors on City of Tracy aquatic center projects in Tracy, California. The scope of work involves comprehensive testing of critical construction elements, including concrete, reinforcing and structural steel, welding, masonry, soils, asphalt, waterproofing, and roofing. All evaluations must be conducted using accredited laboratory facilities and field equipment to ensure strict adherence to applicable building codes. The selected provider is responsible for generating and delivering certified test reports and detailed inspection logs, culminating in a final inspection summary. Interested parties must respond by October 23, 2026, for this project categorized under NAICS code 541380.

POSTED

DEADLINE

Residential Facility Maintenance and Bed Bug RemediationThis subcontract for Residential Facility Maintenance and Bed Bug Remediation supports the Department of Veterans Affairs in San Francisco. The selected provider will perform janitorial services and specialized pest control for prime contractors on residential projects within the VA Health Care System. The primary objective is to ensure living quarters remain clean and free of mold, hazardous substances, and bed bugs through the execution of aggressive remediation plans. To qualify for this engagement, the contractor must utilize a licensed pest control operator and possess industrial cleaning equipment. The contract was posted on October 2, 2026, with a response deadline of October 23, 2026. All work falls under NAICS code 541380 and is managed through the Network Contract Office 21.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Aerospace Coatings Technical Support SpecialistThis subcontract opportunity is for an Aerospace Coatings Technical Support Specialist to provide technical assistance to prime contractors on Air Force projects located at Hill Air Force Base. The selected provider will offer expert guidance on product selection and troubleshooting while ensuring all applications strictly adhere to Technical Orders, Military Specifications, Technical Data Sheets, and specification manuals. The project is a total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Personnel assigned to this contract must possess DBIDS, CAB, or RAB credentials to secure necessary base access. Interested parties must respond by November 3, 2026.

FA8224 Afsc Ol H Pzim

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

Same awarding agency

Solicitation # SPEFA3-27-T-0003

Other Support Activities for Air Transportation

POSTED

about 5 hours ago

DEADLINE

Rubber Tube Manufacturer (Type 2, Class 1)This subcontract opportunity with the DLA Fleet Readiness Center Southeast involves the manufacture and supply of specialized rubber tubing for prime contractors. The required product must be Type 2, Class 1 configuration with a .062 wall thickness, adhering strictly to SAE AMS3216J and SAE AMS2810J standards. Performance takes place in Jacksonville, and the contractor is responsible for delivering finished rubber tubing along with comprehensive material certification reports. To qualify, manufacturers must possess rubber extrusion or molding equipment and maintain quality systems capable of meeting CDRL-METALSCERT-26124 requirements. Quality control must be managed through sampling and lot size determination in accordance with MIL-STD-105/ASQ Z1.4. The solicitation was posted on October 1, 2026, with a response deadline of October 9, 2026, under NAICS code 326192.

Resilient Floor Covering Manufacturing

POSTED

DEADLINE

AMS3216 .500 ID .62 WT

Solicitation # SPEFA3-27-T-0002

Solicitation SPEFA3-27-T-0002, issued by the DLA Fleet Readiness Center Southeast, is for the procurement of 48 feet of rubber tube, NSN 9320-LN-003-5549. The material must be Type 2, Class 1 with a .500 inch inner diameter and .062 inch wall thickness, manufactured in accordance with SAE AMS3216J and SAE AMS2810J standards. The delivery is required within 84 days after order, with a final required delivery date of October 1, 2026, to DLA Distribution Jacksonville. A quantity variance of plus or minus 10 percent is permitted. The contract mandates destination inspection and acceptance, with sampling conducted per MIL-STD-1916 or ASQ H1331. Key quality requirements include the submission of metal certification via CDRL-METALSCERT-26124 and adherence to physical identification marking per RQ017. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements take precedence. The material has no shelf life requirement. Administrative requirements include electronic invoicing through Wide Area WorkFlow and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply of Part Number 7018559315This subcontract involves the supply of four units of hardware component Part Number 7018559315 to prime contractors supporting DLA Aviation. The Department of Defense, specifically the DLA Fleet Readiness Center Southeast, requires that all units adhere to the DLA Master List of Technical and Quality Requirements RA001. The contractor is responsible for packaging items according to ASTM D3951 and palletizing them per RP001, including the application of hazard warning labels per DFARS 252.223-7001 where applicable. Final delivery of the four units is designated as FOB Destination to DLA Distribution Jacksonville.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

FOB Destination Freight TransportThis subcontract involves the secure transport and delivery of manufactured aviation hardware for prime contractors supporting DLA Aviation projects. The service provider is responsible for hauling items from production facilities to specified government destinations under FOB Destination terms, with a strict requirement to maintain packaging integrity according to ASTM D3951 standards and adhere to all Department of Defense shipping and receiving protocols. Managed by the DLA Fleet Readiness Center Southeast under NAICS code 484110, the place of performance is located in Jacksonville, Florida. The solicitation was posted on September 29, 2026, with a response deadline of October 7, 2026.

General Freight Trucking, Local

POSTED

DEADLINE

Aviation Component Manufacturer (Part #7018559316)This subcontract involves the manufacture and supply of a specific aviation component, part number 7018559316, for prime contractors supporting DLA Aviation projects under the Department of Defense. The project is managed by the DLA Fleet Readiness Center Southeast, with performance taking place in Jacksonville, Florida. The contract requires the delivery of one completed, inspected, and labeled component. Strict technical and quality standards must be met, including the use of zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Property marking must adhere to MIL-STD-130N(1), while packaging must comply with ASTM D3951 and MIL-STD-129. Additionally, the manufacturer is required to maintain a quality system certified under SAE AS9003 or ISO 9001. Responses are due by October 7, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA3-26-T-0389

Solicitation SPEFA3-26-T-0389 is a Request for Quotations issued by the DLA Fleet Readiness Center Southeast for the procurement of four brackets, identified by NSN 5341-LN-003-5853 and Lockheed Martin part number 207A138-1. The required delivery date is September 28, 2026, with a delivery timeframe of 84 days after order. The contract specifies FOB Destination for delivery, inspection, and acceptance, with the final destination being the DLA Distribution Jacksonville facility in Florida. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, specifically RA001, RP001, and RQ017. While Item Unique Identification is not required, physical identification and bare item marking are mandatory. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to RP001. Quality assurance involves a zero non-conformance acceptance threshold, utilizing sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and trafficking in persons.

Other Support Activities for Air Transportation

POSTED

DEADLINE

AE21295R, STRAIGHT SWI

Solicitation # SPEFA3-26-T-0388

Solicitation SPEFA3-26-T-0388 is a Request for Quotations issued by the DLA Fleet Readiness Center Southeast for the procurement of one straight swivel coupling, part number AE21295R, manufactured by Eaton Aeroquip LLC. This critical application item, identified by NSN 4730-LL-QJ0-7783, is required for delivery to DLA Distribution Jacksonville, Florida. The original required delivery date is September 28, 2026, with a delivery lead time of 84 days after order. The contract specifies FOB Destination for delivery, inspection, and acceptance. The procurement is categorized under NAICS 488190 and requires strict adherence to quality and technical standards. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and MIL-STD-129, while property identification must comply with MIL-STD-130N(1). Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by October 7, 2026.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS