This Government Contract opportunity from Department Of Defense was posted on October 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Third-Party Aerospace Quality Inspection

Closed

Federal

Submission Closed10/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

POSTED

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Pharmaceutical Compliance and Quality AuditorThis subcontract for NHS England Project Revive seeks a Pharmaceutical Compliance and Quality Auditor to perform critical quality audits and compliance checks for prime contractors. The role involves conducting batch testing, auditing supplier manufacturing sites, and verifying certificates of analysis to ensure all operations meet MHRA standards. The successful provider must utilize laboratory testing equipment and adhere to Quality Management Systems such as ISO 9001, and the personnel performing the work must hold a valid pharmacist licensure. Key deliverables for this engagement include the production of quality assurance reports, compliance certifications, and detailed audit logs. Interested parties must respond by November 30, 2026, in accordance with the solicitation posted on November 3, 2026. The contract falls under NAICS code 541380 and is managed directly by NHS England.

POSTED

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

POSTED

DEADLINE

Optical Testing and Factory Acceptance Testing (FAT)This small business set-aside subcontract for DLA Land Warren involves providing independent verification and validation of optical units for prime contractors. The scope of work focuses on conducting Factory Acceptance Testing on sample units, performing Scratch and Dig inspections in accordance with MIL-PRF-13830B, and utilizing specialized optical inspection tools to verify alignment and clarity. The selected contractor is responsible for delivering comprehensive FAT Test Reports and official inspection certifications for each lot. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense, with a response deadline set for December 3, 2026.

DLA Land Warren

POSTED

about 7 hours ago

DEADLINE

in 30 days

AI Contract Overview

This subcontract for Third-Party Aerospace Quality Inspection supports the Department of Defense Fluid Handling Division by providing independent quality verification and sampling for prime contractors. The selected provider will be responsible for executing sample lot size determinations and attribute or variable inspections in accordance with MIL-STD-105/ASQ Z1.4 and MIL-STD-1916. Additionally, the contractor must verify MIL-STD-129 marking compliance utilizing calibrated micrometers and CMM equipment, ultimately delivering detailed inspection reports and certifications of conformance. To be eligible for this engagement, the contractor must maintain AS9100 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 13, 2026.

General Info

AS9100 certified provider for DoD aerospace quality inspection and verification by October 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0021.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROTOR, MOTOR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 1

subcontract

Response DeadlineOct 13

Deadline has passed

Submission Closed

10/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Performs independent quality verification and sampling for prime contractors delivering DLA Land and Maritime fluid handling contracts. Executes sample lot size determinations per MIL-STD-105/ASQ Z1.4 and attribute/variable inspections per MIL-STD-1916. Verifies MIL-STD-129 marking compliance using calibrated CMM and micrometers. Requires AS9100 certification. Delivers inspection reports and certifications of conformance.