Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

MATOC North Carolina and South Carolina

Active
W912QG-18-R-0003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The USPFO for South Carolina is seeking proposals for Construction Indefinite Delivery-Indefinite Quantity Multiple Award Task Order Contracts to support maintenance, repair, construction, and design-build services across National Guard sites in North Carolina and South Carolina. The contract will cover a broad range of typical construction and maintenance activities, including interior and exterior renovations, HVAC, plumbing, electrical work, fire suppression, landscaping, roofing, paving, environmental remediation, and new facility construction, among others. Most task orders are expected to be sustainment, repair, and maintenance projects under $1 million, with emergency response required within two hours. This is a total small business set-aside under NAICS codes 236220 and 237990, with a small business size standard of $36.5 million average annual revenue. The government anticipates awarding at least two firm-fixed-price contracts with a base period of two years and three one-year options, for a maximum duration of five years. Task orders will range from $2,000 to $5 million, with a maximum cumulative task order value of $50 million across contracts. Awards will be made through a FAR Part 15 source selection based on past performance, technical capability, and pricing submitted for a prototypical project. The solicitation was expected to be released around late July 2018, with a pre-proposal conference and site visit scheduled at Joint Base McEntire, South Carolina. Contractors must be registered in the System for Award Management (SAM) and FedBizOpps to participate. All communications must be in writing, amendments and official documents will be exclusively distributed through the government’s official websites, and no paper copies will be provided. Point of contact information for the contracting specialists is provided for questions or clarifications.

General Info

Small business set-aside for construction and maintenance contracts in NC and SC National Guard sites.

Agency

Department Of Defense → W7NZ Uspfo Activity Sc ArngView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

North Carolina and South Carolina National Guard Locations, SC, USA

Set-Aside

SBA

Documents

(1)

QUESTION_ANSWER_MATOC_PRESOLICITATION.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhasePresolicitation
Posted

Presolicitation

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7NZ Uspfo Activity Sc Arng
Contacts2 people available
OfficeCOLUMBIA, SC, 29201-4763, USA
Organization / Agency
Department Of Defense → W7NZ Uspfo Activity Sc Arng
View Agency Profile
Office AddressCOLUMBIA, SC, 29201-4763, USA
Contacts
Christina KernsContract Specialist
LTC James O. RobinsonSupervisory Contract Specialist

Full Description

Show more
The USPFO for SC intends to issue a Request for Proposal (RFP) for Construction Indefinite Delivery-Indefinite Quantity (IDIQ) Multiple Award Task Order Contracts (MATOC) for maintenance, repair, construction and design build services at North Carolina and South Carolina National Guard locations. a. Project Scope: Typical work includes, but is not be limited to: interior and exterior renovations, heating and air conditioning, HVAC controls, plumbing, fire suppression, interior and exterior electrical and lighting, fire and intrusion alarms, communications, limited utilities, site-work, landscaping, fencing, masonry, roofing, concrete, asphalt paving, storm drainage, limited environmental remediation, construction of new facilities, surveys, studies, design-build and other related work. All will be in accordance with individual task order requirements, specifications and drawings provided with each project or master specifications. It should be noted that the majority of task orders under these contracts will be for sustainment, repair and maintenance (SRM) projects under $1M dollars. Prospective contractors must be able to respond within 120 minutes (2 hours) in response to emergencies via the main office or a staffed satellite office. b. The North American Industry Classification System (NAICS) codes for this work is 236220 and 237990. The small business size standard is $36.5 million average annual revenue for the previous three years. This is a total small business set-aside. c. The Government anticipates award of a minimum of two (2) firm-fixed individual MATOC contracts, providing sufficient qualified contractors present offers. All responsible firms may submit an offer. d. These anticipated contracts will consist of a Base Award Period of two (2) calendar years, and three (3) one-year option periods. Total contract period, to include options, shall not exceed five (5) calendar years. Task Orders will range from $2,000.00 to $5,000,000.00. The total of individual task orders placed against this contract shall not exceed $50,000,000.00. e. The selection process will be conducted in accordance with FAR Part 15 source selection procedures. Proposals will be evaluated on Past Performance, Technical, and Price Evaluation of a prototypical project. Prospective offerors must submit a written past performance and technical proposal and a price proposal for the prototypical project to be considered for award. The prototypical project will be used to evaluate the price proposal and portions of the technical proposal and subsequently make contract award. f. It is now anticipated that the solicitation will be available on or about 27 July 2018. A pre-proposal conference and site-visit at Joint Base McEntire, Eastover, South Carolina, will be scheduled once the solicitation is posted. Details for registering for the conference will be available in the solicitation Section 00100. Interested contractors are encouraged to attend and should register in accordance with the requirements to be provided in the solicitation, prior to attending for clearance to the facility. The solicitation closing date is scheduled for on-or-about 27 August 2018. Actual dates and times will be identified in the solicitation. Scheduling will only be available after the solicitation opens. All information, amendments and answers to questions concerning this solicitation will be posted to FedBizOpps. g. Effective May 29, 2012 Government systems such as CCR and ORCA (on-line representations and certifications) are migrating to in System for Award Management (SAM). Interested offerors must be registered in SAM. To register go to: https://www.sam.gov/portalpublic/SAM/. You will need your DUNS number register. Instructions for registering are on the webpage. The solicitation and associated information will be available from the Federal Business Opportunities system (FedBizOpps.gov or fbo.gov). Contractors and subcontractors interested in this project must register at this site. The plans and specifications will be distributed using the Federal Business Opportunities (FedBizOpps.gov or tho.gov) system. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. FedBizOpps registration requires the following information: 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN) 2) DUNS Number and CAGE Code 3) Telephone Number 4) E-Mail Address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf. Reference paragraph 4.7 of the Vendor Guide for instructions to obtain a MPIN to retrieve the specification and drawing documents. Contractors who do not already have a MPIN are advised that the normal processing is 7 to 12 business days to obtain an MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for other information. Bidders/offerors who have registered with FedBizOpps must access the data for this solicitation with their MPIN. Bidders/Offerors cannot log into the FedBizOpps home page and search for data. h. This solicitation is not a competitive bid and therefore there will not be a formal public bid opening. All inquiries MUST be in writing, preferably via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. No questions will be taken or answered via phone. If you have any questions concerning this procurement you are encouraged to email your questions to christina.p.kerns.civ@mail.mil or james.o.robinson10.mil@mail.mil. DISCLAIMER: The official plans and specifications are located on the official government web page and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to the FedBizOpps.gov or fbo.gov for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will issue no paper copies.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
SLED
BEQ- Sanitize & Paint Rooms, B4167, Multi Rooms, MASS1, Station
Solicitation # N400857607511
Solicitation N400857607511 is a task order under MACC contract N4008525D for the remediation, preparation, and painting of 22 barracks rooms and associated bathrooms at MCAS Cherry Point, North Carolina. The contractor is responsible for providing all labor, supplies, and equipment to eradicate active microbial growth using EPA-registered disinfectants and antimicrobial solutions. The scope of work includes preparing approximately 18,562 square feet of barracks room surfaces and 3,840 square feet of bathroom surfaces by removing failed paint and applying a heavy-duty, mold-and-mildew-resistant sealing primer. Final finishing requires a minimum of two coats of specialized mold/mildew-resistant paint that matches the existing color and sheen, ensuring a uniform finish without visible patching or roller marks. The project is estimated between 25,000 and 100,000 dollars, with the award based on the lowest price. All work must be completed within 60 calendar days of the award. Proposals were due by September 16, 2026, and must include a completed price proposal form and a list of subcontractors. Bonding requirements vary by proposal value, with payment bonds required for projects between 35,000 and 150,000 dollars. The contractor must comply with the Buy American Act, the Davis-Bacon Act, and FAR 28.307-2 liability insurance requirements. A qualified Quality Control Manager is required to oversee project standards, and all site cleanup must be completed to return the area to its original condition prior to final acceptance by the Contracting Officer's Representative.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 4 days
View Details
NAICS: 236220
New
SLED
DB Construction for HC-130J Flight Simulator Facility at USCG Elizabeth City, NC
Solicitation # 32000479
This design-build project involves the construction of a full motion Weapons System Trainer flight simulator facility for C-130J aircraft at USCG Base Elizabeth City, North Carolina. The approximately 13,000 gross square foot facility will include a simulator bay for a Government Furnish, Government Installed mobile simulator, classrooms, administrative offices, debriefing spaces, and essential support areas for mechanical, electrical, and telecommunications systems. The scope of work extends to site development, including the installation of sidewalks and landscaping, while utilizing existing parking areas. A critical technical requirement is the integration of a Siemens Building Automation System to ensure compatibility with existing installation-wide systems. Issued under the DHS National Multiple Award Construction Contract III, Pool Two, the project has a magnitude estimate of approximately 16 million dollars and a performance period of 719 calendar days. The award is based on a best-value tradeoff selection, weighing price against non-price factors such as planning, organization, communication, and the contractor's specific experience with military or commercial flight simulators. Strict security and compliance protocols are in place, requiring all on-site personnel to be US citizens and necessitating adherence to Davis-Bacon wage determinations, Buy American requirements, and various environmental and historic preservation consultations.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 236220
New
SLED
CP2713M Replace Runway Switches
Solicitation # N400857563909
Solicitation N400857563909 is a task order for the replacement of runway switches at Marine Corps Air Station Cherry Point in Havelock, North Carolina. The scope of work involves the demolition of four existing 15KV S&C pad-mounted air switches and the installation of new S&C pad-mounted SF6 switches on new concrete box pads. Additionally, the contractor must replace existing tee splices in adjacent manholes with dead front junctions in above-ground junction box enclosures. The project is estimated to be valued between 1,000,000 and 5,000,000 dollars, with a required completion period of 240 calendar days after the award. The contract will be awarded based on the lowest price. Proposals are due by 1200 local time on September 17, 2026. Key requirements include adherence to the Buy American Act, Davis-Bacon Act wage determinations, and specific bonding requirements for proposals exceeding 150,000 dollars, which include bid, payment, and performance bonds. The contractor is responsible for providing a QC Manager to oversee acceptance checks and tests in accordance with NFPA 70B, NETA ATS, and ANSI standards. Invoicing is processed via Wide-Area Workflow using NAVFAC forms, and the contractor must comply with specific cybersecurity and safety regulations, including the provision of an Accident Prevention Plan and Activity Hazard Analysis.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 5 days
View Details
NAICS: 236220
New
SLED
Upgrade Life Health Safety Systems in Hangar 250
Solicitation # N400857190530
Solicitation N400857190530 involves upgrading the life health safety systems within Hangar 250 at MCAS Cherry Point, North Carolina. The scope of work includes architectural improvements, modifications to fire alarm and fire protection systems, and the rerouting of plumbing and electrical systems. Because the work will be performed in an occupied facility, the contractor must coordinate closely with base operations and adhere to strict safety and security requirements. The project is estimated to be valued between 1,000,000 and 5,000,000 dollars, with a required completion timeframe of 380 calendar days after the award. The contract will be awarded based on the lowest price, and proposals are due by September 21, 2026. Key requirements include compliance with the Buy American Act, the Davis-Bacon Act, and specific bonding requirements for proposals exceeding 150,000 dollars, which include bid, payment, and performance bonds. Deliverables consist of a facility operating plan, comprehensive data packages for system maintenance, and functional performance test reports. Invoicing is managed through the Wide Area WorkFlow system, and the contractor must submit a detailed schedule of prices within 15 calendar days of the award. Quality control is paramount, requiring the submission and acceptance of a Contractor QC Plan before construction begins.
Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 236220
New
P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI
Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri
This solicitation by J&J Contractors, Inc. seeks pricing for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The project involves a multi-story 12,920 square foot laboratory and office facility featuring a steel frame, shallow foundations, a metal standing seam roof, and a combination of masonry and metal panel exterior walls. The scope includes comprehensive site preparations and improvements such as underground stormwater retention, utilities, telecommunications, landscaping, and parking. Additionally, Option 1 includes the construction of a separate 17,978 square foot laboratory facility and the demolition of Building 1272T. The contract covers a wide range of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and fire protection. All work must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Interested parties must submit their responses by November 30, 2026, and should contact Rahul Maheshwari to receive the full bid invitation and documentation via Building Connected.
J&J CONTRACTORS, INC.

POSTED

about 4 hours ago

DEADLINE

in 3 months
View Details
NAICS: 236220
New
NJCC Bathroom Renovations for Buildings 17 & 18
Solicitation # njcc-bathroom-renovations-buildings-17-18
Education & Training Resources is soliciting bids for a fee-for-service subcontract to perform comprehensive bathroom renovations at the Northlands Job Corps Center in Vergennes, Vermont. The project involves the complete renovation of four bathroom areas in Building 17, totaling approximately 944 square feet, and five bathroom areas in Building 18, totaling approximately 1,260 square feet. The scope of work includes the demolition of existing fixtures and the installation of institutional-grade acrylic or FRP shower pans, vitreous China toilets, high-pressure laminate countertops, non-slip porcelain flooring, and LED lighting. To maintain center operations, contractors must execute the renovations in a phased sequence, completing one dormitory at a time. Bidders may submit a unified proposal for both buildings or standalone bids for each. Proposals must include a detailed bid sheet with a cost breakdown separating materials and labor, a project schedule specifying calendar days and working hours, current Vermont state professional licensing, and certificates of insurance. The winning bidder must maintain an active registration in Sam.gov with a Unique Entity ID. Award selection is based on technical alignment with the scope of work and risk mitigation rather than the lowest bid. The contract requires strict adherence to ADA, OSHA, and NFPA 101 Life Safety codes, as well as compliance with the Davis-Bacon Act and various FAR clauses, including 100 percent performance and payment bonds. Payment terms are net 30 days upon receipt of a proper invoice and final project acceptance, which requires a signed punch list and applicable warranties.
Northlands Job Corps Center /ETR

POSTED

about 4 hours ago

DEADLINE

in 1 day
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS