This Government Contract opportunity from New Hampshire was posted on March 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mechanical and Plumbing Hangers and Supports Installation

Closed

State & Local

Submission Closed04/01/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract involves the provision and installation of two sets of interior commercial door assemblies to replace existing doors at the building 300 NAS laboratory facility, located within the William J. Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work extends beyond installation to include necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This solicitation is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Responses are due by November 18, 2026, for the project managed by PTSI Managed Services Inc.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Window and Door Installation Services

Nuneaton and Bedworth Borough Council

POSTED

DEADLINE

Garage Door Preventative MaintenanceThis subcontract opportunity, titled Garage Door Preventative Maintenance, is issued by the Department of the Interior's Fws Contracting Activity. The project involves providing general maintenance and seal replacement for up to ten roll-up garage doors at U.S. Fish and Wildlife Service facilities. The selected contractor will be responsible for performing preventative maintenance, replacing side seals as necessary, and ensuring all doors operate smoothly and safely according to industry standard practices. Deliverables include the replaced side seals and detailed maintenance reports. The contract is designated as a Total Small Business Set Aside under NAICS code 238290. Interested parties must submit their responses by the deadline of November 7, 2026. This role serves as a subcontractor supporting prime contractors on these specific federal facility projects.

Fws Contracting Activity

POSTED

DEADLINE

Sectional Overhead Door InstallationThis subcontract opportunity, managed by the Fws Contracting Activity under the Department of the Interior, involves the installation of sectional overhead doors for U.S. Fish and Wildlife Service facility projects. The scope of work requires the removal of three existing roll-up garage doors and the installation of three new sectional overhead doors featuring 2 inch tracks, 12 inch radii, angle-mounted configurations, and torsion spring systems rated for a minimum of 10,000 cycles. The contractor is responsible for verifying field measurements and ensuring that pad surfaces are flush with the jambs to deliver fully functional installations. The project is designated as a total Small Business Set Aside under NAICS code 238290. Interested parties must submit their responses by November 7, 2026. This effort is specifically structured for subcontractors working under prime contractors to complete the specified facility improvements.

Fws Contracting Activity

POSTED

DEADLINE

Category 5 Elevator and Conveyor Safety TestingThis small business set-aside subcontract involves performing Category 5 Five-Year Safety Tests and annual inspections for prime contractors at the USP Atwater facility under the Department of Justice. The scope of work includes conducting full-load and full-speed testing on Thyssen and Pflow hydraulic elevators as well as chain-drive material conveyors. All services must be performed in strict accordance with ASME A17.1, A17.2, and B20.1 standards, along with CCR Title 8 regulations, culminating in the delivery of comprehensive inspection reports. To be eligible for this project, personnel must hold Qualified Elevator Inspector certification and obtain NCIC background clearance. The contract is categorized under NAICS code 238290 and is specifically designated for small businesses. Interested parties should note the response deadline of November 6, 2026, for performance at the Atwater location.

POSTED

DEADLINE

WSTF Tank Pipe Insulation

Solicitation # N0025327Q0003

Naval Undersea Warfare Center

POSTED

DEADLINE

Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE

Solicitation # 140FF027Q0033

The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.

Fws Contracting Activity

POSTED

DEADLINE

Z--OR-FWS SHELDON NWR-INSTALL WOOD STOVE

Solicitation # 140FF027Q0043

Fws Contracting Activity

POSTED

DEADLINE

Z--OR-FWS SHELDON NWR-RE-KEY HQ

Solicitation # 140FF027Q0036

Fws Contracting Activity

POSTED

DEADLINE

SMDOT Elevator Maintenance

Solicitation # 12701633

The City of Santa Monica, through the D600 Department of Transportation (SaMoDOT), is soliciting proposals for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes one Independent model AAK137, one Montgomery model AA2986, and one Otis model AEP227. The selected contractor must provide monthly systemic maintenance, a dedicated maintenance supervisor for safety surveys, and 24/7 emergency callback services with a one-hour response time. All parts must be new, conform to Original Equipment Manufacturer standards, and be stocked in a local warehouse. The award will be granted to the best bidder based on a variety of factors, including the technical experience of key personnel, financial resources, and the ability to provide future service, rather than solely on the lowest price. Bidders must comply with Title II of the ADA, the Living Wage Ordinance, and Labor Code Section 1773.2 regarding prevailing wages. A payment bond is required for awards exceeding 25,000 dollars, and the City requires a certificate of insurance naming them as an additional insured. Proposals must be submitted electronically via the OpenGov portal by November 9, 2026, at 3:00pm. The contract includes a ten-day written notice period for termination without cause and requires notification of force majeure events within 24 hours.

D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

DEADLINE

RFP 902787 Elevator Condition Assessment & Modernization Plan

Solicitation # 902787

The Alameda County General Services Agency Building Maintenance Department is soliciting proposals for a turnkey professional services contract to perform comprehensive condition assessments and develop modernization plans for elevator equipment at three Oakland, California locations: 1106 Madison Street, 1111 Jackson Street, and 1401 Lakeside Drive. The project encompasses a total of nine elevators, including Otis hydroelectric and overhead traction models, as well as US Elevator overhead traction units. The scope of work is divided into six phases, beginning with baseline scheduling and condition assessment reports, moving through the preparation of bid-ready modernization specifications and procurement support, and concluding with construction oversight and warranty period inspections. Qualified consulting firms must demonstrate at least five years of relevant experience, and staff performing the work must hold a current National Association of Elevator Safety Authorities International Qualified Elevator Inspector certification. As a public works project, all contractors must be registered with the California Department of Industrial Relations and adhere to prevailing wage and apprenticeship requirements. Proposals will be evaluated based on a maximum of 550 points, with a heavy emphasis on the description of proposed services and relevant experience over cost. Preference may be given to certified Small and Local Emerging Businesses. The awarded contractor will be ineligible to bid on any subsequent solicitations resulting from this assessment.

General Services Agency-Procurement

POSTED

1 day ago

DEADLINE

in 21 days

AI Contract Overview

This subcontract opportunity with the University System of New Hampshire involves the fabrication and installation of hangers, supports, and seismic restraints for mechanical and plumbing piping systems. All work must be performed in strict accordance with specification 22 0529. The project falls under NAICS code 238290, focusing on other plumbing, heating, and air-conditioning contractor work. The solicitation was posted on March 11, 2026, and requires a response by April 1, 2026, at 4:00 PM. Interested parties can find further details and submission guidelines through the provided SciQuest procurement portal.