Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Casting and Splinting Kit Supply

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of a complete functional casting and splinting therapy starter kit, encompassing all essential components including a dispenser cabinet, cast tape, cohesive bandage, stockinet, adhesive fleece liner, and associated items necessary for immediate clinical use. The kit must be fully operational and ready for deployment in medical settings, ensuring consistency, safety, and efficiency in patient care procedures. All items must comply with established medical standards and be packaged to maintain sterility and integrity until point of use. This subcontract is issued under the NAICS code 327992 and is managed by the Department of Defense through its MEDICAL SUPPLY CHAIN MD SURG FSF organization. The place of performance is designated as Fort Bliss with a ZIP code of 79918-0000, indicating the primary delivery location. Proposals must be submitted by the response deadline of July 27, 2026, with the solicitation posted on July 20, 2026. Interested parties are required to access the official solicitation portal via the provided DIBBS link to review full specifications, submission requirements, and compliance conditions.

General Info

Supply complete casting and splinting starter kit for Fort Bliss delivery by July 27, 2026, per DoD medical standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

327992 - Ground or Treated Mineral and Earth ManufacturingView NAICS

Place of Performance

FORT BLISS, TX, 79918-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a complete functional casting and splinting therapy starter kit, including dispenser cabinet, cast tape, cohesive bandage, stockinet, adhesive fleece liner, and related components.

Similar Contracts

Same NAICS industry code

BAG, MEDICAL INSTRUMThe contract specifies a medical instrument and supply bag in coyote tan, constructed from 1000 denier nylon with reinforced stitching, a top grab handle, outer cinch straps, internal drain holes, and contour-padded shoulder straps for enhanced comfort and durability. The bag features internal pockets made of urethane-coated mesh and adjustable external compression straps, designed to accommodate a 100 oz hydration reservoir. Its dimensions are 13 inches by 18 inches by 8 inches, with a total weight of 3 pounds 7 ounces. The item is not regulated by the FDA and must be delivered as a single set under the unit of issue SE. The supplier must provide the source and part number, with the approved part number being 60MP00DE from Eagle Industries Unlimited, LLC. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a container that protects against damage and breakage. Shipments must use commercial exterior packaging suitable for safe and economical delivery via common carrier to designated destinations, including locations in the United States, Germany, and Japan. Delivery is required within five days of order, with FOB destination terms, zero quantity variance, and inspection and acceptance conducted at the final delivery point. The item is part of solicitation SPE2DS-26-T-257C, with a required delivery date of July 23 or 24, 2026, and must adhere to all technical and quality requirements referenced in the DLA Master List.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

DENTAL KIT, EMERGENCY

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

COMBAT LIFESAVER KIThe Combat Lifesaver Kit is a standardized medical supply package issued to U.S. Marine Corps personnel trained as Combat Lifesavers, designed to provide immediate life-saving interventions for battlefield injuries including severe extremity hemorrhage, penetrating chest wounds, and airway obstruction. The kit contains a comprehensive array of trauma care items: three Combat Application Tourniquets (CAT) for controlling massive limb bleeding, multiple types of combat gauze including QuikClot and compressed gauze for wound packing, an abdominal emergency trauma dressing, two emergency trauma dressings, a nasopharyngeal airway and a Guedel airway for securing the airway, two Hyfin chest seal combos for treating sucking chest wounds, four needle decompression devices for tension pneumothorax, a burn dressing, bear claw gloves, alcohol prep pads, a Sam Splint for immobilization, trauma shears, a rescue hook, and supporting items such as duct tape, surgical lubricant, eye shields, and casualty response cards. The kit is packaged as a single unit of issue in a sealed, durable container meeting commercial packaging standards for safe transit and environmental protection. All components are subject to strict regulatory and marking controls: the kit must comply with FDA regulations as a medical device, and all items must be labeled in accordance with Medical Marking Standard No. 1, replacing MIL-STD-129. The item has a non-extendable shelf life of 36 months, with delivery required to occur no more than five months after manufacture. The contract specifies a quantity of 10 kits to be delivered within 20 days to MCBH Kaneohe Bay, Hawaii, with inspection and acceptance occurring at the destination. Packaging must be commercially viable, secure against damage, and suitable for carrier transport under the lowest freight rates. The procurement is governed by DLA Technical and Quality Requirements, and bidders must provide exact manufacturer and part number details. The solicitation is managed by the Department of Defense’s Medical Supply Chain, with a response deadline and delivery schedule clearly defined, ensuring readiness of these life-saving kits for frontline Marine operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

KIT, CASTING AND SPLThe contract pertains to the procurement of a Functional Cast Therapy Starter Kit for casting and splinting, identified by NSN 6545-01-557-1549 and part numbers from BSN Medical Inc and Performance Health Supply, LLC. The kit includes a dispenser cabinet, multiple rolls of cast tape in various sizes, cohesive bandages, stockinet, adhesive fleece liner, cloth/foam liner, felt liner, thumb spica liners, adhesive hook, and stretch loop, all packaged as a single unit of issue (KIT, KT). Delivery is required within 20 days of order placement, with FOB destination terms, and inspection and acceptance occur at the designated delivery point—Fort Bliss, Texas. The item is regulated by the FDA, requiring referral confirmation from the product specialist prior to award. Packaging must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items, and non-hazardous items must be commercially packaged per ASTM D3951, though DLA’s Master List of Technical and Quality Requirements takes precedence. Hazardous materials, if any, must comply with IP025 and OSHA’s Hazard Communication Standard, with Safety Data Sheets and hazard labels submitted before award. All packaging and labeling must meet DLA’s RP001 packaging and palletization requirements, and shipments must be traceable, with parcel post prohibited. The contract includes numerous FAR and DFARS clauses governing small business representation, equal opportunity, trafficking in persons, cybersecurity compliance (NIST SP 800-171), subcontracting, safety notifications, transportation, whistleblower rights, and disclosure of government information. Payment will be processed electronically via WAWF, and the solicitation is issued under NAICS code 327992 by the Defense Logistics Agency’s Medical Supply Chain, with proposals due via the DIBBS portal. The estimated value is approximately $1,233 based on historical pricing, with no option quantities or price flexibility indicated.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MEDICAL SUPPLY SET, OBSThe contract specifies the procurement of a single unit of an obstetrical medical supply set, packaged as a sterile field kit for emergency or field use. The kit contains essential sterile and disposable items including two pairs of sterile exam gloves, one sterile obstetrical napkin, two obstetric antiseptic towelettes, two umbilical cord clamps, one disposable scalpels, one plastic apron, a 17 by 24 inch plastic-lined underpad, two 13 by 19 inch disposable towels, one 40 by 48 inch drape sheet, one plastic placenta bag, two plastic twist ties, one two-ounce bulb syringe, four sterile 4x4 inch gauze sponges, one sterile foil baby bunting, and one newborn diaper. All components are packed in an OB box and must adhere to strict medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is regulated by the FDA, requiring vendor submission of manufacturer details for verification prior to award. Packaging must meet commercial standards ASTM D3951 unless the material is classified hazardous under FED-STD-313, in which case TQ requirement IP025 applies, and all DLA Master List technical and quality requirements take precedence. The unit of issue is each (EA), with a contracted quantity of one and a delivery deadline of 20 days FOB destination. The item will be delivered to USS JASON DUNHAM DDG 109 at FPO AE 09567 and must be shipped via traceable means, excluding parcel post, under DLA procurement protocols. The contract number is SPE2DS-26-T-241K with an original required delivery date of July 20, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 5 hours

Duct Insulation SupplyThe contract entails the supply of air duct insulation materials that must strictly adhere to detailed technical specifications, with zero tolerance for any variance in quantity, ensuring precise alignment with operational requirements. The materials are required to meet rigorous performance and compliance standards appropriate for defense applications, with full accountability expected in delivery volume and material integrity. This subcontract is issued under the NAICS code 327992 and is managed by the Defense Logistics Agency under the Department of Defense, signaling its critical role in supporting military infrastructure. The solicitation was posted on July 14, 2026, and the place of performance, while not explicitly defined, is expected to align with DLA logistics networks, with delivery subject to strict contractual enforcement. All bids must guarantee exact quantities as specified, with no flexibility permitted, reflecting the non-negotiable nature of this procurement.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NEEDLE, SUTUREThe contract specifies the procurement of reusable, non-sterile suture needles, each measuring three-eighths of a circle and size 16, constructed from stainless steel. These needles are supplied in packages of six, with the unit of issue being a package, and must be clearly labeled with the NSN, manufacturer details, CAGE code, date of manufacture, expiration or retest date, and contract or lot number. All containers must be marked with the lot number and manufacture date prefixed by “MFD,” and the bidder must identify the company and part number being offered, with the specified part number being MS140-16 from MILTEX INSTRUMENT COMPANY INC. The packaging must comply with DLA Packaging Requirements for Procurement and ASTM D3951, with materials sealed in unit containers that prevent damage, and shipped in commercial exterior containers suitable for safe delivery at the lowest freight rate to the destination. Labeling must follow Medical Marking Standard No. 1, superseding MIL-STD-129, and all items must be traceable, with parcel post strictly prohibited. The needles are subject to FDA regulation, requiring buyer referral for confirmation, and must be free of intentional mercury or mercury compounds except under specific exceptions defined by NAVSEA, with mercury-containing portable devices requiring secondary containment and shock protection. Delivery is required within 20 days to Wright Patterson AFB, Ohio, at FOB destination, with zero tolerance for quantity variance, and acceptance occurs at the delivery point. The contract number is SPE2DS-26-T-256L, with a response deadline of July 27, 2026, and the original required delivery date is July 23, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

GLOVE, PATIENT EXAMIThe contract specifies the procurement of 5 packages, each containing 100 black, medium-sized, powder-free, latex-free nitrile gloves designed for patient examination and treatment, with ambi-dextrous fit and beaded cuffs. The gloves are non-sterile, with a palm weight of 95 plus or minus 5 grams, a length of at least 240 millimeters, and a single-wall thickness of 0.16 plus or minus 0.03 millimeters at the palm, engineered as a heavy-gauge product suitable for high-demand environments including special-forces operations. The item carries the NSN 6515-01-515-0200 and must meet strict shelf-life requirements: a non-extendable 60-month shelf life from manufacture, with no more than 9 months allowed to have elapsed between manufacturing and delivery to the government. Packaging must comply with DLA standards, and all bidders must clearly identify the source and part number of the product being offered. Technical and quality requirements referenced under R-numbers are governed by the current version of the DLA Master List of Technical and Quality Requirements active on the solicitation issue date. Delivery is required within 5 days of award, with the place of performance in Morrisville, North Carolina, and the contract falls under NAICS code 339113. The solicitation was issued on July 21, 2026, with a response deadline of July 27, 2026, managed by the Department of Defense’s Medical Supply Chain under the office of Allen Costello.

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

VALVE, RESUSCITATORThe valve, resuscitator is a barrier system featuring three separate filtration layers and a one-way duck bill valve with top and bottom ports, designed for adjustable pressure settings from 5 to 20 cm H2O and equipped with a standardized 22mm ID connector to interface with any resuscitation bag flow diverter. Each unit is individually packaged and supplied in boxes of ten, with a shelf life of 60 months, ensuring long-term usability. To maintain product integrity, no more than nine months may have elapsed between the manufacturer’s production date and the delivery date to the government. The item is governed by technical and quality requirements outlined in the DLA Master List, with packaging and handling compliance mandated under specific procurement standards including RA001, RP001, and RQ011. The NSN 6515-01-620-0444 identifies this item, with a purchase request quantity of 10 boxes under solicitation SPE2DS-26-T-257D issued by the Department of Defense’s Medical Supply Chain, requiring delivery within five days of award to the APO 09094-3219 location. Primary point of contact for inquiries is Elizabeth Cruz, with the solicitation posted on July 21, 2026, and responses due by July 27, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

NEBULIZER, MEDICINALThe contract specifies the procurement of 50 units of a medicinal nebulizer, each comprising a mouthpiece, TEE, 7-foot tubing, and a 6-inch flex tube, with the unit of issue listed as PG/50EACH. Each complete unit must be sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point at Fort Campbell, Tennessee. All items must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and markings must be applied in accordance with this standard, which is available through DLA Troop Support. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions tied to the solicitation or award date. Bidders are required to clearly identify the source and part number of the supplied product. The NSN is 6515-01-466-0371, with a delivery requirement of 20 days after order award under solicitation SPE2DS-26-T-254Q, issued by the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

BAG, URINE COLLECTIONThe contract is for a urine collection bag with a 2000 CC capacity, featuring 182.88 cm (72 inch) tubing and a 400 mL urine meter with a white background and graduated markings, including a small burette chamber and a spring-loaded sample port designed for use with a Foley catheter. The package includes a Foley tray and a 10 CC prefilled syringe in 18 French size with a 5 CC capacity, supplied as a disposable unit in packages of ten. The item is identified by NSN 6515-01-406-7748, with a quantity of two packages required, under purchase request 7017553324, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring that each unit is sealed and protected against damage and that shipping containers guarantee safe delivery at the lowest cost to the specified point of performance at Scott AFB, 62225-5252. The solicitation is issued under SPE2DS-26-T-255A with a submission deadline of July 27, 2026, and incorporates referenced technical and quality requirements from the DLA Master List, requiring bidders to specify the exact source and part number being offered. Compliance with DLA packaging and marking directives is mandatory for all medical acquisitions under this solicitation.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

HOLDER, SUTURE NEEDLEThe contract specifies the procurement of a lightweight, straight, 5-inch surgical-grade stainless steel suture needle holder manufactured by Webster, identified by NSN 6515-00-619-8219 and purchase request 7017572098, with a total quantity of three units to be delivered within 48 days FOB destination. All items must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to medical packaging and labeling requirements under Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet MIL-STD-2073-1E guidelines, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest cost. The product is regulated by the FDA, and bidders must provide complete manufacturer and part details for official referral. The item is classified as a critical application item and must not contain mercury or mercury-containing compounds except in specifically exempted devices such as batteries or instrument sensors, and any such devices must include a secondary containment boundary per NAVSEA 5100-003D. All supplies must be marked according to specified medical standards and delivered without government identification if rejected. The solicitation number is SPE2DS-26-T-256T, with a response deadline of July 27, 2026, and the place of performance is Tracy, California.

Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

DISPENSER, SOLVENTThe contract calls for the procurement of 80 ESD-safe solvent dispensers, each with a 6-ounce capacity and a purity pump designed to prevent cross-contamination by ensuring fluid does not return to the dispenser. The dispensers must be static dissipative and feature a stainless steel pump with an air-tight check valve, meeting stringent quality and technical standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging and marking must comply with MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, including barcoding, while medical item labeling follows Medical Marking Standard No. 1. Hazardous materials are strictly regulated, with mandatory SDS submissions and adherence to OSHA’s Hazard Communication Standard, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries or instruments, with additional containment requirements for portable fluorescent lamps and instruments. Delivery is required to New Cumberland, PA 17070-5002 by July 24, 2026, with FOB destination terms placing all transportation risk and cost on the contractor. The solicitation number is SPE2DS-26-T-236N, issued by the Department of Defense’s Medical Supply Chain, and responses must be submitted electronically via DIBBS by July 24, 2026. Contractors must provide their UEI and CAGE code if offering covered defense telecommunications equipment or services and must represent their small business status if applicable. Contract clauses incorporate key FAR and DFARS requirements including equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, trafficking in persons, cybersecurity compliance with NIST SP 800-171, and mandatory invoicing through WAWF. Compliance with DLA packaging standards RP001 and the removal of government identification from non-accepted supplies is required, alongside adherence to rules governing compensation of former DoD officials and whistleblower protections. No contract pricing is specified in the solicitation, and the basis of award remains undisclosed, though price is likely a primary consideration in this simplified acquisition under a NAICS code of 339114 for medical and dental equipment and supplies manufacturing.

Dental Equipment and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

CHIP, CARBON DIOXIDEThe item specified is a CHIP, CARBON DIOXIDE, a single-use diagnostic component containing ten measurement capillaries pre-filled with a carbon dioxide reagent designed for use with the CMS gas analyzer. It has a measurement range of 200 to 3000 ppm and is issued in individual units. The contract requires strict compliance with technical and quality standards referenced in the DLA Master List, including packaging per DLA requirements, removal of government identification from non-accepted supplies, and adherence to Medical Marking Standard No. 1 which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to Joint Base Andrews, Maryland. The item carries a non-extendable shelf life of 24 months, with the condition that no more than three months may have elapsed between date of manufacture and government delivery. Labeling must include the date of manufacture, expiration date, retest date, contract number, and lot number in accordance with the latest revision of MMS1C. The procurement is governed by solicitation SPE2DS-26-T-254L, with a deadline for response on July 27, 2026, and a delivery date of 20 days after award. Two units are required under purchase request 7017553325, and the contract falls under NAICS code 621410 as a federal medical supply acquisition managed by the Department of Defense through the Medical Supply Chain MD Surg FSF.

Family Planning Centers

POSTED

about 19 hours ago

DEADLINE

GLOVE, NITRILEThe contract is for the procurement of 12 boxes of nitrile patient examination gloves, each box containing 90 gloves, for a total of 1,080 gloves. The gloves are non-sterile, powder-free, latex-free, and sand-colored, sized X-Large, with a textured surface for enhanced grip in both wet and dry conditions. They feature an extended, form-fitting beaded cuff and are ambidextrous, designed to be thicker and longer than standard exam gloves to provide improved protection and fit. The item is identified by NSN 8415-01-600-6052 and falls under NAICS code 339113 for medical device manufacturing. Bidders must clearly indicate the source and part number being supplied, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements. The solicitation, issued under number SPE2DS-26-T-256Z, was posted on July 21, 2026, with a response deadline of July 27, 2026. Delivery is required within 20 days of award, and the point of contact for inquiries is Tiffany Parker of the Department of Defense’s Medical Supply Chain.

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

LUMBAR PUNCTURE KITThe LUMBAR PUNCTURE KIT is procured under contract SPE2DS-26-T-256S with a requirement for two cases, each containing ten units, for delivery within 20 days of award. Each kit must have a minimum shelf life of 60 months, with no more than nine months having elapsed from the manufacturer’s date to the date of delivery to the government. Labeling must comply with MMS1A standards and include the manufacturer date, expiration or retest date, contract number, and lot number. The product must adhere to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements via R and I identifiers, and packaging must meet DLA standards. Bidders must specify the source and part number being offered, and all non-accepted supplies must have government identification removed prior to return. The NSN is 6515-01-707-4663, the acquisition is under NAICS code 339112, and performance is directed to Jacksonville, Florida 32214-5000. The point of contact is Chandler Alvarez, reachable via email and phone provided.

Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

ADAPTER, OXYGEN FLOWThe adapter is a flexible silicone device designed to connect a Passy Muir Valve to ventilator tubing or closed suction systems, featuring a 22mm outer diameter that stretches to ensure a secure fit. It is color-coded purple for compatibility with the PMV 2001 model and is also usable with the PMV 2000 and PMV 005. The adapter is latex-free and intended for use within ventilator circuits to facilitate airflow control while maintaining a reliable seal. It is sold individually, with the unit of issue listed as each. The product is identified by NSN 6515-01-722-3342 and must be marked according to the latest Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied. The procurement falls under solicitation SPE2DS-26-T-255Y, issued by the Department of Defense’s Medical Supply Chain MD SURG FSF, with a response deadline of July 27, 2026. Delivery is required within five days of award, and the contract incorporates DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies.

Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE