Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Medical Device Packaging and Labeling Services

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Medical Device Packaging and Labeling Services involves providing specialized packaging and marking for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work requires packaging assemblies in accordance with ASTM D3951 and RP001 standards, while ensuring all markings comply with MIL-STD-129 and Medical Marking Standard No. 1 using approved MIL-SPEC labeling equipment. The final deliverables consist of fully labeled and packaged canister assemblies prepared for FOB Destination shipment to the USS Ramage DDG 61. Managed under NAICS code 561990 for the Department of Defense, the project is overseen by the Medical Supply Chain MD Surg FSF.

General Info

Subcontract for medical device packaging and labeling for shipment to USS Ramage DDG 61.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

561990 - All Other Support Services

Place of Performance

FPO, AE, 09586, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-27-T-0609.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CANISTER ASSEMBLY, SUCT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for prime contractors on DLA Troop Support Medical Supply Chain projects. Packages assemblies per ASTM D3951 and RP001 and applies markings compliant with MIL-STD-129 and Medical Marking Standard No. 1 using MIL-SPEC labeling equipment. Delivers fully labeled and packaged canister assemblies ready for FOB Destination shipment to USS Ramage DDG 61.

Similar Contracts

Same NAICS industry code

Traffic Control and Signage ProviderThis subcontract opportunity is for a Traffic Control and Signage Provider to support prime contractors on projects managed by the Laurens County Board of Commissioners within the City of Cadwell, Georgia. The selected provider will be responsible for establishing and maintaining safe work zones by posting construction signs and managing traffic flow through the strategic use of cones, signage, and barricades. All services must be performed in strict compliance with Manual on Uniform Traffic Control Devices requirements to ensure the safety of both workers and the public. The solicitation was posted on October 14, 2026, with a response deadline of November 4, 2026, at 3:00 PM. This procurement falls under NAICS code 561990 and is specifically designated as a subcontract. Interested parties can find further details and submission guidelines through the Georgia Department of Administrative Services portal.

Laurens County Board of Commissioners

POSTED

about 13 hours ago

DEADLINE

Caltrans IFB 10A2923

Solicitation # caltrans-ifb-10a2923

Caltrans IFB 10A2923 is a solicitation for multi-provider on-call and as-needed services focused on the positive location of underground utility facilities within the state of California. This contract is designated as a Small Business set-aside and specifically encourages the participation of Disabled Veteran Business Enterprise subcontractors and suppliers. The opportunity is managed by MP Nexlevel, with Larry Macedo serving as the primary point of contact. Interested parties must submit their responses by the deadline of October 20, 2026. The services fall under NAICS code 561990, covering specialized utility location and support activities.

POSTED

about 13 hours ago

DEADLINE

MI 2026-11 Paper Shredding Services

Solicitation # MI 2026-11

Adams and Associates, Inc., operating on behalf of the U.S. Department of Labor, is soliciting bids for monthly paper shredding services at the Miami Job Corps Center in Miami Gardens, Florida. The contract, identified by solicitation number MI 2026-11, covers a period of performance from November 1, 2026, to October 31, 2027. The selected vendor will be required to provide ten standard shred containers in central locations and perform shredding services once per month. As a federally funded facility, the center is entitled to GSA pricing. Bids are due by October 23, 2026, and must be submitted on company letterhead, including a cost breakdown per service call and per container. Award selection is based on the most responsible bidder rather than the lowest cost. Mandatory requirements for all vendors include a valid Unique Entity ID, active SAM.gov registration, and all necessary business and employee licenses for the State of Florida. Additionally, vendors must provide proof of Workers Compensation, Automobile Liability, and Comprehensive General Liability insurance of at least $1,000,000 per occurrence. Contractors must adhere to strict center safety and security protocols, including mandatory searches and a prohibition on fraternization with students and personnel.

Miami Job Corps Center

POSTED

about 13 hours ago

DEADLINE

Traffic Control ServicesThis subcontract for Traffic Control Services supports prime contractors working on water infrastructure projects within Chesterfield County, Virginia. The primary objective is to ensure safe traffic flow and worker protection through the implementation of comprehensive traffic control plans, which include the strategic use of signage, flagging, and barricades. A critical component of the scope involves the coordination and management of lane closures specifically for Route No. 10. The opportunity is categorized under NAICS code 561990 and is associated with the agency for Chesterfield County. Interested parties should note that the response deadline is November 12, 2026, with the performance of services centered in Chesterfield, zip code 23832.

Chesterfield County

POSTED

about 13 hours ago

DEADLINE

ESB - MACC Audio and Lighting Production

Solicitation # IFQ 8000 mason1000

The City of Austin is seeking a single entity to provide comprehensive audio and lighting production services for the Dia de Los Muertos Signature Event at the Emma S Barrientos Mexican American Cultural Center, located at 600 River St, Austin, TX. The event is scheduled for Sunday, November 1, 2026, from 1:00pm to 6:00pm. The selected contractor must complete all equipment setup and be ready for sound checks by 12:00pm on the day of the event. Key deliverables include providing full audio support for three live band performances, encompassing front-of-house sound, monitors, and all necessary hardware such as microphones, stands, mixer consoles, cabling, stage lighting, and backline. To ensure efficient transitions between sets, the contractor is required to utilize provided stage plot plans and technical riders. Administrative requirements include mandatory registration as a City of Austin vendor and compliance with the Drug Free Workplace Act and the Americans with Disabilities Act. The contractor must provide event insurance and maintain stable key personnel throughout the engagement, with any replacements requiring City approval based on equivalent experience. Contract management will be overseen by Event Coordinator Carlos Meda and Contract Monitor Margaret Stenz. Invoicing is to be submitted bi-weekly, with payments typically processed within two to four weeks via mail or ACH. The contract remains effective from the date of execution until all deliverables are completed or the City terminates the agreement.

POSTED

about 14 hours ago

DEADLINE

Traffic Control & Safety ServicesThis subcontract for Traffic Control and Safety Services involves providing and maintaining traffic control devices to manage traffic flow for prime contractors on road projects within Jefferson County, Texas. The scope of work includes the installation and maintenance of essential safety equipment such as barricades, signs, cones, and arrow boards to ensure site perimeter security and safe traffic movement. All services must be performed in strict accordance with the Texas Manual on Uniform Traffic Control Devices and TxDOT specifications. Interested parties should note that the response deadline for this opportunity is November 4, 2026.

JEFFERSON COUNTY

POSTED

DEADLINE

Traffic Control and Flagger ServicesThis subcontract for Traffic Control and Flagger Services involves providing essential traffic management and lane closure support for prime contractors working on Texas Department of Transportation highway maintenance projects along US0069. The scope of work requires the deployment of certified flaggers and the installation of traffic control devices, such as signs, cones, and arrow boards, ensuring all operations strictly adhere to the Texas Manual on Uniform Traffic Control Devices to maintain safe traffic flow through active work zones. The opportunity is categorized under NAICS code 561990 and was posted on October 13, 2026, with a response deadline of November 10, 2026. Interested parties can find further details through the TxSmartBuy portal.

Texas Department of Transportation

POSTED

DEADLINE

Traffic Control and Flagging ServicesThis subcontract for Traffic Control and Flagging Services supports prime contractors executing lighting projects for the City of Albany, Georgia. The scope of work involves the deployment and management of essential traffic control infrastructure, including signs, cones, and barricades, to ensure safe work zones during bucket truck operations. A critical requirement for this engagement is that all provided flagging personnel must hold ATSSA or state-equivalent certifications to properly manage traffic flow. Interested parties should note the response deadline of November 13, 2026, for this opportunity categorized under NAICS code 561990.

POSTED

DEADLINE

Traffic Control and Public SafetyThis subcontract for the City of Rohnert Park focuses on traffic control and public safety services to support prime contractors on municipal projects. The selected provider will be responsible for implementing street closures, establishing and maintaining detours, and managing pedestrian safety and traffic flagging. These operations require the use of specialized equipment, including traffic cones, signage, and barricades, to ensure safe work zones and the continuous flow of traffic. Qualified candidates must hold valid traffic control certifications from Caltrans or a local municipality. The opportunity was posted on October 13, 2026, with a response deadline of November 5, 2026. All work will be performed within Rohnert Park, California, under NAICS code 561990.

City of Rohnert Park

POSTED

DEADLINE

Defense Packaging and Marking ServicesThe Defense Packaging and Marking Services subcontract involves providing final packaging, marking, and palletization for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the processing of 17,000 units using MIL-SPEC materials and industrial labeling systems. All activities must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 requirements for palletization to ensure items are shipment-ready. This project is managed under the Department of Defense and will be performed in Tracy, California. Interested parties should note the response deadline of October 26, 2026. The contract is categorized under NAICS code 561990, focusing on specialized packaging and logistics support for military weapons supply chains.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Military-Spec Packaging and CratingThis subcontract involves providing specialized packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of 24 units in accordance with ASTM D3951 and the application of markings and labels per MIL-STD-129. All shipments must utilize MIL-SPEC packaging materials and industrial marking equipment to ensure compliance for delivery to the DLA Distribution Depot at Hill AFB, Utah, via FOB Origin shipment. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 561990. Interested parties should note the response deadline of October 21, 2026, for this specific requirement located in Hill AFB, Utah.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Medical Device Packaging and Marking ServicesThis subcontract for Medical Device Packaging and Marking Services involves the final packaging and marking of endodontic points for prime contractors supporting Department of Defense DLA supply contracts. The scope of work requires packaging points into units of 60 utilizing clean-room or medical-grade sterile materials to ensure a 24-month shelf life. All deliverables must be retail-ready and fully labeled for shipment to JBSA Ft Sam Houston. Compliance is mandatory regarding specific marking standards, including MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. The project falls under NAICS code 561990 and is managed by the Medical Supply Chain FSH. Interested parties should note the response deadline of October 20, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Supply of Sterile Hypodermic Syringes and NeedlesThis subcontract through the Department of Defense Medical Supply Chain MD Surg FSF involves the provision of sterile, plastic, disposable hypodermic syringes and needles for prime contractors. The required units must be 3 ML in volume with 23 Gauge, 1 inch needles, packaged in quantities of 100 per package. All supplies must strictly adhere to ASTM D3951, MIL-STD-129, Medical Marking Standard No. 1, and meet NSN 6515-00-149-1206. A critical requirement for these medical devices is a non-extendable shelf life of 60 months. The contract falls under NAICS code 339112 and requires the delivery of completed shipments to a performance location in FPO 96661. Interested parties must respond by October 20, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Multi-Functional Emergency Trauma DressingsThis subcontract involves the manufacture and supply of sterile, multi-functional emergency trauma dressings for the Department of Defense under the Medical Supply Chain MD SURG FSF. The required bandages must measure 6 inches wide by 56 inches long and include a sterile non-adherent pad, four Velcro securing strips, an elastic wrap, and a closure device. To ensure product viability, all dressings must have a 60-month shelf life and be delivered within 9 months of the date of manufacture. Performance for this contract is based in FPO 34085, with the primary objective being the delivery of completed emergency trauma dressing units.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Digital Hypothermia ThermometersThis subcontract involves the supply of 27 digital hypothermia thermometers under NSN 6515-01-540-9946 for the Department of Defense Medical Supply Chain MD SURG FSF. The required devices must feature an extended temperature range of 78.0 to 111.9 degrees Fahrenheit, provide readings within 20 to 30 seconds, and utilize replaceable 1.55V LR41 batteries. Each unit must be provided with a clear two-piece plastic storage case. All deliverables must adhere to MIL-STD-2073-1E packaging requirements and general medical acquisition standards. The contract is designated as FOB Destination with the place of performance located at APO 09227-0000. The procurement falls under NAICS code 423450.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

MIL-STD-2073-1E Packaging and Delivery ServicesThis subcontract, titled MIL-STD-2073-1E Packaging and Delivery Services, is a Women-Owned Small Business set-aside issued by the Department of Defense for the Medical Supply Chain MD Surg FSF. The project requires the performance of military-grade packaging and shipping for prime contractors, specifically involving the delivery of 800 fully packaged and marked units. All work must adhere to strict regulatory standards, including MIL-STD-2073-1E for packaging, Medical Marking Standard No. 1, and MIL-STD-129 for shipment marking. The scope of work includes managing logistics for FOB Destination delivery to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. Operating under NAICS code 488510, the contract was posted on October 14, 2026, with a response deadline of October 20, 2026.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Production of Colt M4 Simulation Long GunsThis subcontract involves the production of 800 Colt M4 simulation long guns for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work requires the fabrication of weapon chassis and external components using non-additive manufacturing methods to accurately replicate the weight and ergonomics of the M4. All deliverables must strictly adhere to the Berry Amendment and the DLA Master List of Technical and Quality Requirements. The project is designated as a Women-Owned Small Business set-aside under NAICS code 339999, with performance taking place in New Cumberland. Interested parties must respond by October 20, 2026, to fulfill the requirements for the Medical Supply Chain MD Surg FSF agency.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

Medical Device Military Packaging and MarkingThis subcontract, titled Medical Device Military Packaging and Marking, involves providing specialized packaging and marking services for 2,000 units of medical equipment destined for Taiwan. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the project requires strict adherence to military standards, specifically MIL-STD-2073-IE Packing Level B for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for marking. To ensure the integrity of the equipment during international transit, the contractor must utilize specialized cushioning and preservative materials. The opportunity was posted on October 14, 2026, with a response deadline of October 21, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

High-Flow Infusion & Blood-Fluid Warmer Systems SupplyThis subcontract involves the supply of 2,000 complete high-flow blood-fluid warmer and pressure infusion systems to prime contractors supporting Department of Defense medical supply contracts. Each unit must be delivered as a comprehensive system including necessary accessories such as IV poles, reservoir holders, power cords, and carrying cases, along with the required operator and service manuals. To ensure regulatory compliance, all provided medical devices must have FDA approval and include a Certificate of Conformance in accordance with FAR 52.246-15. The procurement is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF agency.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Digital Hypothermia ThermometersThis subcontract involves the supply of digital hypothermia thermometers to prime contractors supporting DLA Troop Support medical supply contracts for the Department of Defense. The required devices must feature a temperature range of 78.0 to 111.9 degrees Fahrenheit with an accuracy of plus or minus 0.2 degrees, utilize LR41 batteries, and be provided with two-piece plastic storage cases. The contractor is responsible for delivering completed medical devices that are marked according to Medical Marking Standard No. 1 and packaged in compliance with MIL-STD-2073-1E. This procurement falls under NAICS code 423450 and is managed by the Medical Supply Chain MD Surg FSF, with the place of performance located at APO 09227-0000.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

THERMOMETER, DIGITAL, HY

Solicitation # SPE2DS-27-T-0672

Solicitation SPE2DS-27-T-0672 is a request for quotations from the Defense Logistics Agency for the procurement of three digital hypothermia thermometers under NSN 6515-01-540-9946. The required devices must feature an extended measurement range of 78.0-111.9 degrees F (plus or minus 0.2 degrees F) or 26.0-43.9 degrees C (plus or minus 1 degree C), provide results within 20 to 30 seconds with a beep signal, and include a replaceable 1.55V LR41 battery capable of 1,500 measurements. Each unit must be supplied in a clear two-piece plastic storage case. Delivery is required within 84 days after the order, with the destination point set as the WCCC USA Med Mat Ctr Eur in Germany. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires commercial packaging in sealed unit containers and suitable exterior shipping containers. Inspection and acceptance will occur at the destination. The procurement is governed by various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act. Payment must be processed electronically through the Wide Area WorkFlow system. Offers involving additive manufacturing are ineligible for award, and the solicitation is categorized under NAICS code 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

THERMOMETER, DIGITAL, HY

Solicitation # SPE2DS-27-T-0671

Solicitation SPE2DS-27-T-0671 is a federal procurement for 27 digital hypothermia thermometers under NSN 6515-01-540-9946 for the Medical Supply Chain MD Surg FSF. The required devices must feature an extended measurement range of 78.0-111.9 degrees F (+/- 2 degrees F) or 26.0-43.9 degrees C (+/- 0.1 degrees C), provide results within 20-30 seconds with a beep signal, and include a replaceable 1.55V LR41 battery capable of 1,500 measurements. Each unit must be supplied with a clear two-piece plastic storage case. Delivery is required within 84 days after the order date, with the destination and acceptance point located at the WCCC USA Med Mat Ctr EUR in Germany. The contract mandates strict adherence to commercial packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Each unit must be in a sealed container within a suitable commercial exterior shipping container. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Offerors must be registered in the System for Award Management under NAICS code 339112 and submit quotations via the DLA Internet Bid Board System by October 20, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

INFUSION SET, HIGH FLOW

Solicitation # SPE2DS-27-Q-0002

Solicitation SPE2DS-27-Q-0002 is a Firm Fixed Price acquisition issued by the DLA Troop Support Medical Supply Chain for a Foreign Military Sales requirement. The contract is for the procurement of 2,000 high-flow blood-fluid warmer infusion sets (NSN 6515-01-684-4542). Each unit must be delivered as a complete system including a pressure infusion system, IV pole, reservoir holder, operator and service manuals, carrying case, power cord, and eye hook and hanger. Delivery is required within 30 days after receipt of order, with shipping destined for Taichung City, Taiwan. The procurement is governed by strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for labeling. Inspection and acceptance are set at the origin, with the FDA acting as the inspector and acceptor via the Wide Area Workflow system. Bidders must provide the source and part number being supplied and are required to upload a Certificate of Conformance per FAR 52.246-15. Evaluation will consider price, with a specific preference given to HUBZone offerors, and the agency may conduct price realism analysis. Quotations are due by October 21, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

SYRINGE AND NEEDLE, HYP

Solicitation # SPE2DS-27-T-0670

Solicitation SPE2DS-27-T-0670 is a fixed-price procurement issued by the DLA Troop Support Medical Supply Chain for sterile, plastic, disposable hypodermic syringes and needles. The specific requirement is for NSN 6515-00-149-1206, featuring 23 gauge 1 inch needles and 3 ml capacity, delivered in packages of 100 units. The items are designated as Type I (Code S) with a non-extendable shelf life of 60 months. Delivery is required within 20 days after receipt of order, with the destination and acceptance point set as the USNS Salvor ARS 52. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129, and Medical Marking Standard No. 1, with the DLA Master List of Technical and Quality Requirements taking precedence. Bidders must specify the source and part number being supplied and provide a complete data package for any proposed alternate parts. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity regulations for safeguarding covered defense information.

Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS