Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Device Packaging and Labeling Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the packaging and labeling of medical drainage systems in strict compliance with DLA, MMS1A, and MIL-STD-129 standards, ensuring all regulatory and military requirements are met. Each unit must include accurate expiration dates, lot numbers, and hazard communication details as mandated by federal guidelines, with labeling adhering to standardized formats for identification, traceability, and safety. The work is to be performed at the designated place of performance in APO, ZIP 09227-0000, with all deliverables subject to approval under the Department of Defense’s Medical Supply Chain MD Surg FSF. This subcontract is classified under NAICS code 325992 and was posted on August 4, 2026, with responses required by August 10, 2026. While no set-aside designation is specified, the contract is part of a larger DoD logistics framework aimed at maintaining consistent, secure, and standardized medical device distribution. All承包商 must have the capability to meet the precise documentation, labeling, and packaging criteria outlined in the referenced military standards to ensure compatibility with defense supply chain operations. The solicitation is accessible through the DIBBS platform for qualified vendors seeking to participate.

General Info

Pack and label medical drainage systems per DLA, MMS1A, MIL-STD-129 at APO 09227-0000 for DoD supply chain.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325992 - Photographic Film, Paper, Plate, Chemical, and Copy Toner ManufacturingView NAICS

Place of Performance

APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Contract packaging and labeling of medical drainage systems per DLA, MMS1A, and MIL-STD-129 standards, including expiration dates, lot numbers, and hazard communication.

Similar Contracts

Same NAICS industry code

Toner for Many Farms High School

Solicitation # 140A2326Q0241

The contract is for toner supply to Many Farms High School under solicitation number 140A2326Q0241, issued by the Indian Education Acquisition Office within the Department of the Interior. It is designated as an Indian Small Business Economic Enterprise set-aside, restricting eligibility to qualified Indian small businesses, and falls under NAICS code 325992 for other chemical product and preparation manufacturing. The solicitation was posted on August 6, 2026, with a deadline for responses set for August 13, 2026, at 9:00 PM Eastern Time. The office address is in Albuquerque, New Mexico, 87104, and the primary point of contact is Ashleigh Cleveland, reachable via email at Ashleigh.Cleveland@bia.gov. The place of performance is not specified beyond the institutional recipient, Many Farms High School, which is implied to be located within a tribal jurisdiction served by the Indian Education Acquisition Office. All proposals must comply with the set-aside requirements and be submitted through the official SAM.gov portal linked in the document.

Indian Education Acquisition Office

POSTED

about 6 hours ago

DEADLINE

Supply of Briteline DX Gloss Calibration FilmThe contract is for the supply of one unit of Briteline DX Gloss calibration film that must meet brand-name or equal standards and comply with applicable packaging requirements. The solicitation is designated as a Small Business Set Aside under the SBA program, meaning only qualified small businesses are eligible to bid, with the NAICS code 325992 indicating the industry classification for other chemical product and preparation manufacturing. The action is being managed by DLA Maritime - Puget Sound under the Department of Defense and requires performance at Bremerton, Washington, with a ZIP code of 98314. Respondents must submit their proposals by the deadline of August 7, 2026, at 5:00 PM, following the posting date of August 5, 2026. The contract type is listed as a subcontract, suggesting it may be part of a larger procurement effort under a primary government contract.

DLA Maritime - Puget Sound

POSTED

DEADLINE

in about 23 hours

Hydra-PEG Coating Supply or Application ServiceThe contract seeks the provision of Hydra-PEG or an equivalent hydrophilic surface coating for scleral lenses, aimed at improving wettability and wearer comfort. The scope includes either supplying the coating material or performing the application service as part of the manufacturing or modification process. The requirement is structured as a subcontract under NAICS code 325992, indicating its alignment with other miscellaneous chemical product manufacturing activities. Performance is designated to take place in San Antonio, Texas, with a zip code of 78234, and the contracting activity falls under the Department of Defense through the W40M MRC0 West office. The solicitation was posted on August 5, 2026, and responses are due by August 7, 2026, at 4:30 PM Eastern Time, indicating a narrow window for submission. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. The contract does not list a point of contact, and no additional organizational or geographic details are provided beyond the place of performance. Interested parties must submit proposals through the designated SAM.gov portal to be considered for award.

POSTED

DEADLINE

in about 22 hours

Aircraft Nose Art Gerber/Plotter Printer

Solicitation # FA462526Q1050

The solicitation FA462526Q1050 is a combined synopsis and request for quote issued by the 509th Contracting Squadron at Whiteman Air Force Base, Missouri, for the procurement of a Roland TrueVIS XG-640 Printer/Cutter or an equivalent system to produce aircraft nose art. The equipment must fully comply with the specifications outlined in the attached Performance Work Statement, and the contractor is required to provide a training session on its operation. This is a 100% total small business set-aside with a size standard of 1,500 employees, and the North American Industry Classification System code is 325992 for photographic film, paper, plate, chemical, and copy toner manufacturing. The period of performance mandates completion within 120 days after receipt of order, with delivery FOB destination at Whiteman AFB. Submission of quotes must be electronic, limited to three pages, and sent via email with a specific subject line. Offers must include a firm-fixed-price quote and a detailed technical capability narrative demonstrating full compliance with the PWS; quotes with pricing alone will be rejected. The original due date for proposals was August 6, 2026, but Amendment 1 extended the solicitation date to August 10, 2026, with responses now due by 5:00 PM EST. Questions regarding the solicitation must be submitted by August 4, 2026, at 10:00 AM CST via email to the primary and secondary points of contact. All offerors must be currently registered and active in the System for Award Management at the time of submission to be eligible. Quotes must remain valid for 30 calendar days following the submission deadline. Evaluation will be based on two factors: technical acceptability, assessed on a pass/fail basis against all PWS requirements, and price reasonableness, which considers the total cost of the base requirement and any optional periods. Answers to submitted questions will be published as amendments to the solicitation. The primary contact is Najee Holland and the secondary contact is Tiffany Driskill, both reachable via email and phone as listed.

FA4625 509 Cons Cc

POSTED

DEADLINE

pH Test Paper and Color Chart Supply

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical-Grade Packaging and Labeling ServicesThe contract requires the provision of secondary and tertiary packaging, preservation, and labeling services specifically for burn-trauma dressings, with strict adherence to MIL-STD-2073-1E and the Medical Marking Standard No. 1 to ensure defense-grade compliance and medical readiness. All packaging processes must maintain the integrity, sterility, and traceability of the dressings throughout storage and transit, meeting the rigorous standards expected for military medical supply chains. The work is to be performed at HURLBURT FIELD, Florida, with a ZIP code of 32544-5668, and is classified as a subcontract under NAICS code 325992, indicating specialized medical manufacturing and packaging activities. The solicitation was posted on August 4, 2026, with a firm deadline for responses on August 10, 2026, giving potential vendors a limited window to submit proposals. The contracting activity falls under the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF, signaling this is part of a broader effort to secure reliable, standards-compliant medical packaging for critical battlefield supplies. Failure to meet the specified military and medical marking standards will result in non-compliance, and all subcontractors must demonstrate proven capability in handling sensitive medical devices under government-controlled environments. The opportunity is not set aside for any specific small business category, and bidders must be prepared to fully comply with federal procurement regulations governing defense-related subcontracting.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Additive Manufacturing Filament Supply

Defense Logistics Agency

POSTED

DEADLINE

Electrolyte Chemical Supply for CapacitorsThe contract involves the supply of specialized organic electrolyte chemicals designed for use in fixed electrolytic capacitors that must meet rigorous military-grade performance and stability standards. These chemicals are critical components ensuring reliable operation under extreme conditions, and the supplier is expected to deliver consistent quality aligned with defense requirements. The procurement is structured as a subcontract under the NAICS code 325992, indicating it falls within the category of other chemical product and preparation manufacturing, with performance tied to Robins Air Force Base in Georgia. The solicitation was posted on August 4, 2026, with a firm response deadline of August 17, 2026, giving potential vendors a two-week window to submit proposals. It is managed by the Nuclear Reactor Program under the Department of Defense, underscoring the mission-critical nature of the application. Although no set-aside type is specified, the requirement demands strict compliance with military specifications, and the place of performance is fixed at the Robins AFB location with a ZIP code of 31098-1887. The contract opportunity is accessible via the DIBBS platform, and while no point of contact is listed, interested parties are expected to follow the official procurement link for submission details and technical requirements.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Reagents and Chemical ComponentsThe contract calls for the supply of chlorine test reagents and solutions packaged in glass ampuls and dropper bottles for medical diagnostic applications, requiring precise formulation and documented stability testing to ensure reliability and accuracy in clinical environments. All materials must meet stringent regulatory standards for medical use, including compliant packaging that preserves integrity during storage and transport, with specifications covering shelf life, contamination control, and labeling requirements. The vendor is expected to deliver consistent quality across batches and demonstrate capability in handling the technical and regulatory demands of diagnostic reagent production. This subcontract is issued under the NAICS code 325992 for other chemical product and preparation manufacturing and is managed by the Department of Defense through its Medical Supply Chain FSH office. The place of performance is designated as FPO with a ZIP code of 96662, indicating delivery to military or government facilities with overseas operations. Proposals must be submitted by August 11, 2026, following the public posting on August 4, 2026, with no set-aside provisions specified. Interested parties must meet all technical, quality, and compliance benchmarks to be considered for award, as the reagents are critical to diagnostic procedures in military and allied healthcare settings.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Reprocessing Chemicals and ConsumablesThe contract is for the supply of Rapicide PA disinfectant and associated test strips used in high-level endoscope reprocessing, ensuring sterile conditions for medical instruments in clinical environments. It is a subcontract under the Department of Veterans Affairs, specifically managed by the 242-NETWORK Contract Office 02, and falls under NAICS code 325992 for other chemical product and preparation manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, at 5:00 PM, indicating a tight window for vendor submissions. While no specific place of performance or point of contact is listed, the chemicals and consumables are intended for use within VA healthcare facilities, requiring strict compliance with infection control standards and reliable, consistent delivery to support critical endoscopic procedures.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Shade Structure Supply and Assembly

California Parks and Recreation, Department of

POSTED

DEADLINE

Supply of Mace Chemical Carrier UnitsThe contract calls for the supply and delivery of nine Mace Chemical Carrier units identified by NSN 8465017032002, with strict adherence to military packaging standards MIL-STD-2073-1E and MIL-STD-129 to ensure compliance with Department of Defense requirements. All units must be delivered within a 20-day window to the specified destination at FPO, ZIP 96663-4122, with no flexibility in timeline or packaging specifications. The solicitation is structured as a subcontract under NAICS code 325992 and is managed by the C and T Supply Chain organization under the Department of Defense. Responses are due by August 14, 2026, with the opportunity posted on August 3, 2026, through the DIBBS platform, and no set-aside preferences or additional eligibility criteria are indicated.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Hazardous Materials Handling and TransportationThe contract requires the safe packaging, labeling, and transportation of diagnostic kits that contain hazardous materials, ensuring full compliance with Department of Defense and Defense Logistics Agency standards for both sea and land shipments. All activities must adhere to rigorous safety and regulatory protocols to mitigate risks associated with transporting hazardous substances, with emphasis on precision in documentation, secure containment, and transport logistics tailored to military requirements. The place of performance is identified as JBER, 99506-4400, indicating the operational focus on this military installation. This is a subcontract under NAICS code 488999, which pertains to other support activities for transportation, and the solicitation is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The opportunity was posted on August 5, 2026, with a hard deadline for responses on August 11, 2026, leaving a narrow window for interested parties to submit proposals. There is no set-aside designation, meaning the contract is open to all qualified contractors regardless of business size or status. The official solicitation can be accessed via the DIBBS portal, where detailed technical and procedural requirements will be available for prospective bidders.

All Other Support Activities for Transportation

POSTED

DEADLINE

Small Business Set-Aside Participation OpportunitySmall businesses eligible under socioeconomic programs such as Women-Owned Small Business, Service-Disabled Veteran-Owned Small Business, HUBZone, or 8(a) are invited to pursue subcontracting opportunities in support of a prime contract for the supply of diagnostic test kits. This opportunity is tied to a Department of Defense procurement managed by the Medical Supply Chain MD Surg FSF, with performance required at Joint Base Elmendorf-Richardson in Alaska, specifically at the ZIP code 99506-4400. The North American Industry Classification System code 325414 identifies the scope as pharmaceutical and medicine manufacturing. The solicitation was posted on August 5, 2026, and responses must be submitted by August 11, 2026, with no formal solicitation number provided but accessible via the DIBBS platform at the listed URL. The opportunity is structured as a subcontract and specifically targets participation from designated small business categories to ensure inclusive contracting practices within the defense medical supply chain.

Biological Product (except Diagnostic) Manufacturing

POSTED

DEADLINE

Supply of Bacterial Test Kits (API 20 E)The contract involves the procurement and delivery of API 20 E test kits designed for the identification of Enterobacteriaceae and other Gram-negative rods, essential for medical and diagnostic applications. The supplier is required to meet strict compliance standards including proper packaging, accurate labeling, adherence to hazardous materials handling protocols, and mandatory MIL-STD-129 marking to ensure uniformity and traceability throughout the supply chain. The work must be performed and delivered to the designated location at JBER with ZIP code 99506-4400, indicating the operational focus on military medical logistics. The solicitation is categorized as a subcontract under NAICS code 325414, relating to pharmaceutical and medicine manufacturing, and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF organization. Responses are due by August 11, 2026, with the solicitation posted on August 5, 2026, providing a limited window for qualified vendors to submit proposals.

Biological Product (except Diagnostic) Manufacturing

POSTED

DEADLINE

Disposable Tracheal Tube Stylets SupplyThe contract is for the supply of sterile, disposable tracheal tube stylets constructed with aluminum and PVC coating, specifically designed to fit endotracheal tubes with an inner diameter ranging from 7.5 mm to 10 mm for use in airway management procedures. These stylets are intended for single-use in clinical settings and must meet strict sterility and performance standards to ensure safe and reliable intubation. The procurement is issued as a subcontract under the NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector. The offering is part of the Department of Defense’s Medical Supply Chain initiative, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Fort Stewart, Georgia, under the zip code 31314-5185. Responses to this solicitation must be submitted by August 11, 2026, with the request published on August 5, 2026, through the DIBBS platform. There is no set-aside classification specified, meaning the opportunity is open to all qualifying contractors without restrictions based on business size or ownership type. While no specific point of contact is listed, interested parties are directed to the public DIBBS link for full documentation and submission instructions. The stylets must conform to all applicable regulatory and technical specifications for medical devices, including sterility, biocompatibility, and mechanical integrity, to ensure compatibility with standard endotracheal tubes used in military and civilian healthcare environments.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Military Packaging and Marking Services

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling Support

Environmental Consulting Services

POSTED

DEADLINE

Supply of 1-Liter Ventilator Test Lungs

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 5, 2026, with a response deadline of August 11, 2026, and is classified as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF. The place of performance is designated as Fort Campbell with a zip code of 42223-5000, though no specific city, state, or country details are provided beyond that. The solicitation number is not available, and the NAICS code is listed as NA, indicating a lack of standard classification. There is no information provided regarding set-aside type, organization type, or point of contact, and the system is unable to decompose the prime contract’s scope, statement of work, or CLINs due to technical issues. The only actionable link provided directs to a DIBBS platform page for the request for quotation with identifier SPE2DS26T312R.

POSTED

DEADLINE

Shelf-Life Management and Inventory ControlThe contract requires strict adherence to a 36-month shelf life starting from the delivery date for all medical supplies, ensuring products remain viable and safe for use throughout their designated lifespan. Comprehensive lot tracking must be implemented to enable full traceability of inventory from receipt to distribution, and all items must be labeled with expiration dates in full compliance with RS020 standards. Inventory control must follow a strict first-in, first-out methodology to minimize waste and prevent out-of-date items from being issued, with processes in place to verify and enforce this sequencing at every stage of handling and storage. The supplies are to be delivered to Fort Campbell, Tennessee, under a subcontract arrangement managed by the Department of Defense’s Medical Supply Chain, with all obligations tied to the procurement reference SPE2DS26T310X and responses due by August 11, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Packaging, Palletization, and Bar-Coding ServicesThe contract requires comprehensive commercial packaging, palletization, and GS1-128 bar-coding services for medical dressing shipments, all conducted in strict compliance with MIL-STD-129, ASTM D3951, and DLA RP001 standards. These specifications mandate precise labeling, uniform pallet configurations, and barcode accuracy to ensure seamless logistics tracking and receipt processing within the Department of Defense supply chain. The work is to be performed at Fort Campbell, Kentucky, with a response deadline of August 11, 2026, and is classified as a subcontract under the NAICS code 561910 for other support services. The solicitation is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, emphasizing operational readiness and supply chain reliability for military medical providers. All packaging and labeling must align with federal and defense regulations to guarantee interoperability across military installations and logistics networks. The requirement is time-sensitive, with submissions due within six days of posting, and the performance location is fixed at a specific military logistics hub, underscoring its critical nature to ongoing medical supply operations.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract requires the provision of hazard warning labels and safety data sheets for medical dressing components that contain hazardous materials, ensuring full compliance with MIL-STD-129 for labeling, 29 CFR 1910.1200 for the Hazard Communication Standard, and DFARS 252.223-7001 for defense acquisition regulations. All documentation must be accurately formatted and aligned with federal military and occupational safety standards to facilitate safe handling, storage, and use across the supply chain. The work is scoped as a subcontract under the NAICS code 541690 and is associated with the Department of Defense’s Medical Supply Chain under the MD SURG FSF office, with performance required at Fort Campbell, Kentucky, zip code 42223-5000. Responses must be submitted by August 11, 2026, and the solicitation was posted on August 5, 2026, with no set-aside preferences indicated.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Occlusive Chest Wound Seal Dressing SupplyThe contract seeks the supply of 20 packages, totaling 40 units, of latex-free, hydrophilic gel adhesive, translucent, occlusive chest wound seal dressings that comply with NSN 6510-01-581-0553 specifications. These dressings are intended for critical medical use and must meet exact military standards for performance, material safety, and durability under field conditions. The requirement is issued as a subcontract under the NAICS code 325193, which categorizes it within the manufacturing of medical and surgical supplies. The place of performance is designated as Fort Campbell, with a zip code of 42223-5000, indicating the primary delivery location for the goods. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, granting potential suppliers a six-day window to submit proposals. The contracting entity is the Department of Defense, specifically under the Medical Supply Chain MD Surg FSF, highlighting the urgency and military necessity of the procurement. No set-aside provisions or small business preferences are specified, and the contract is not linked to a specific solicitation number in the provided data. All submissions must align strictly with the NSN requirements to ensure compatibility with existing military medical logistics systems and protocols.

Ethyl Alcohol Manufacturing

POSTED

DEADLINE