This Solicitation opportunity from Department Of Defense was posted on April 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
MEDICAL EQUIPMENT S
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of two units of a medium-sized medical equipment set, specifically a trauma field medical kit designed for tactical use, identified as the TMK-ME. This medic backpack features labeled pockets for modular organization and contains various medical modules including personal protection, airway/thoracic, IV, bandage and dressing, cricothyroidotomy, immobilization, and miscellaneous supplies. The dimensions of the kit are 24 by 12 by 9 inches, and it is packaged to comply with strict standards to ensure protection and safe delivery. The equipment must meet a shelf-life requirement of 24 months, with delivery occurring no more than three months after manufacturing, and labeling must include detailed information such as manufacturer, part number, and expiration date. Delivery is scheduled within five days to a designated DoD facility in El Paso, Texas, with strict packaging and marking standards following medical marking standard No. 1 and applicable technical and quality requirements outlined in the DLA master list. The contract specifies that the product is FDA-regulated and requires coordination with product specialists for confirmation. Shipment methods are to be the fastest traceable means, excluding parcel post, with packaging conforming to commercial standards and applicable hazardous material regulations if relevant. The solicitation and contract details are managed through the Department of Defense’s Medical Supply Chain office, with clear points of contact and delivery instructions to ensure timely and secure fulfillment.
General Info
Agency
NAICS
Place of Performance
BUILDING 2 SHERIDAN ROAD, EL PASO, TX, 79936-0000, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
MEDICAL EQUIPMENT SET, TRAUMA, FIELD,
MULTICAM, TACTICAL MEDICAL KIT MEDIC
TMK-ME IS A MEDIUM SIZE MEDIC BACKPACK
WITH LABELED POCKETS FOR MODUALIZED
ORGANIZATION OF INSTRUMENTS AND SUPPLIES,
CONTENTS INCLUDE INSTRUMENTS PERSONAL
PROTECTION MODULE, AIRWAY/THORACIC MODULE,
IV MODULE, BANDAGE AND DRESSING MODULE,
CRIOTHYROIDOTOMY MODULE, IMMOBILIZATION
MODULE, AND MISCELLANEOUS ITEMS,
DIMENSIONS 24 BY 12 BY 9 IN
.
UNIT OF ISSUE EACH, EA.
.
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE GOVERNMENT. . LABELS SHALL INCLUDE: NSN MANUFACTURER AND CAGE DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER.. . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
..
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPE2DS-26-T-8956
SECTION B
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
ALTITUDE TECHNOLOGIES INC. 04JV2 P/N 01278MC
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016264647 0001 EA 2.000
NSN/MATERIAL:6545016115293
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE2DS-26-T-8956
SECTION B
PR: 7016264647 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W56C6S
0410 CA BN CO A CIVIL AFFA
BUILDING 2 SHERIDAN ROAD
EL PASO TX 79936-0000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W56C6X
0410 CA BN CO B CIVIL AFFA
BUILDING 2 SHERIDAN ROAD
EL PASO TX 79936-0000
US
MARKFOR
W56C6X
0410 CA BN CO B CIVIL AFFA
BUILDING 2 SHERIDAN ROAD
EL PASO TX 79936-0000
US
M/F: (TCN) W56C6X60980003
RDD:
PROJ: TP 1
SUPP ADD: W90WYU SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2A FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:04/13/2026
SPE2DS-26-T-8956 NSN/Part Number: 6545-01-611-5293 Quantity: 2 EA Purchase Request: 7016264647QTY: 2 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
