Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical-Grade Packaging and Labeling

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of compliant packaging and labeling for 20-liter medical reagent units, adhering strictly to MMS1C and DLA standards. Each unit must be properly marked with a 2D Data Matrix barcode and include all mandated date and lot information to ensure traceability and regulatory compliance. The work is classified as a subcontract under NAICS code 325991, and performance is to be carried out at FPO with a ZIP code of 96694. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. All deliverables must meet federal medical supply requirements without exception.

General Info

Provide compliant 20L medical reagent packaging with 2D barcodes, per MMS1C/DLA standards at FPO 96694 by August 10, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325991 - Custom Compounding of Purchased ResinsView NAICS

Place of Performance

FPO, AP, 96694, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide compliant packaging and labeling for 20-liter medical reagent units per MMS1C and DLA standards, including 2D Data Matrix barcodes and required date/lot markings.

Similar Contracts

Same NAICS industry code

Medical Packaging and DLA Supply Chain ComplianceThe contract requires strict adherence to DLA packaging standards for medical supplies, ensuring sterility is preserved throughout the supply chain, environmental conditions are properly controlled, and packaging withstands the stresses of transport and handling. This includes the potential for kitting or repackaging medical items to meet operational requirements, with all activities designed to maintain the integrity and readiness of critical healthcare materials. Compliance is non-negotiable, and all packaging methods must align with established military and medical logistics protocols. The contract is classified as a subcontract with a NAICS code of 325991, issued under the Department of Defense’s Medical Supply Chain FSH office. Bidders must submit proposals by August 10, 2026, with the solicitation posted on August 2, 2026. The place of performance and point of contact details are not specified, but performance is expected to support federal medical supply chain operations. The contract can be accessed through the DIBBS portal using the provided reference link.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Pharmaceutical Packaging & Unit Dose RepackagingThe contract entails the unit dose repackaging of Diazepam tablets for military use, following strict standards including DLA RP001, ASTM D3951, and MIL-STD-129, ensuring compliance with military packaging and labeling requirements. The work includes serialization and barcoding of each unit dose to support traceability and inventory management, alongside proper preservation techniques to maintain drug integrity during storage and transit. All packaging must meet the durability and environmental protection criteria necessary for military logistics operations. Performance is required at the specified location in San Diego, California, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract is categorized as a subcontract under NAICS code 325991, which pertains to other pharmaceutical and medicinal product manufacturing. The overseeing agency is the Department of Defense through the Medical Supply Chain Pharm FSA, and the work supports the broader military pharmaceutical distribution network, requiring full adherence to federal and defense-specific regulations throughout the repackaging process.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Pharmaceutical Packaging & Labeling ServicesThe contract requires the provision of military-compliant packaging and labeling services for Tramadol Hydrochloride Tablets, ensuring full adherence to Defense Logistics Agency standards. This includes the application of barcoding, preservation techniques, and precise marking with mandatory identifiers such as NSN, TCN, RDD, and contract-specific codes to support accurate inventory management and distribution within the Department of Defense supply chain. The work must meet all regulatory and operational requirements for pharmaceuticals destined for military use, with strict attention to durability, legibility, and compliance with federal specifications. This is a subcontract under the Defense Logistics Agency, categorized under NAICS code 325991 for other pharmaceutical and medicinal product manufacturing. The contract was posted on August 2, 2026, and is associated with the award reference SPE2DX25D8022 and delivery order SPE2D926F7845. Performance may occur at any location as determined by the contractor’s operational needs, with no specific place of performance designated. The contract does not indicate a set-aside type or point of contact, and all activities must align with DLA’s procedural and logistical guidelines for defense pharmaceuticals.

Defense Logistics Agency

POSTED

DEADLINE

Sterile Medical Device Packaging and LabelingThe contract entails the final packaging, labeling, and kitting of cautery devices to meet strict federal and military medical marking standards, requiring precise adherence to shelf-life coding, hazard communication labels, and Government identification marking protocols. All work must ensure full compliance with regulatory requirements for sterile medical devices destined for military use, with particular attention to accuracy and traceability in label content and packaging integrity. The performance location is designated as Fort Hood, Texas, with the work being executed under a subcontract arrangement through the Department of Defense’s Medical Supply Chain. The solicitation, issued under NAICS code 325991 for other miscellaneous pharmaceutical and medical product manufacturing, was posted on August 2, 2026, with a response deadline of August 10, 2026. While no set-aside type is specified, the procurement is managed by the MEDICAL SUPPLY CHAIN MD SURG FSF office and is accessible through the DIBBS platform. Contractors must be prepared to meet all defense-specific labeling and packaging mandates, ensuring products are ready for direct deployment in military medical environments without further modification or reprocessing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract mandates the packaging, labeling, and kitting of medical supplies in strict compliance with MIL-STD-129, DLA RP001, and hazardous materials regulations, ensuring all procedures meet federal defense and safety standards. Services must be performed with precision to support the U.S. Department of Defense’s Medical Supply Chain Pharm FSA, with performance centered at the FPO location identified by zip code 96691. The work falls under NAICS code 325991 for other chemical product and preparation manufacturing, indicating the specialized nature of the medical packaging operations involved. This is a subcontract opportunity with a response deadline of August 10, 2026, and was posted on August 2, 2026, allowing vendors sufficient time to prepare and submit proposals. While the solicitation number is not provided in the data, the official portal for submissions and further details is accessible via the DIBBS platform at the designated link. There is no set-aside classification indicated, meaning the contract is open to all eligible subcontractors regardless of business size or status, and no point of contact information is listed, suggesting all communications should be handled through the DIBBS system. Compliance with all military labeling, packaging, and hazardous materials protocols is non-negotiable for award consideration.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Specialized Packaging and Barcoding for Medical DevicesThe contract requires specialized packaging and barcoding services for medical litters designed to meet military compliance standards, including adherence to MMS No. 1 and MIL-STD-129 requirements. All packaging must incorporate GS1-compliant barcodes and human-readable data to ensure accurate identification, tracking, and logistics handling throughout the defense supply chain. The work must align with federal specifications for medical device packaging, ensuring durability, clarity, and regulatory conformity under extreme operational conditions. Performance is scheduled to take place in Jacksonville, with a zip code of 28545-6070, and the solicitation falls under NAICS code 325991 for other pharmaceutical and medicine manufacturing. This is a subcontract opportunity issued by the Department of Defense under the MEDICAL SUPPLY CHAIN MD SURG FSF, with a response deadline of August 10, 2026. Interested parties must submit proposals by the specified deadline to participate in the procurement process, which emphasizes stringent quality and compliance controls. The contract does not specify a set-aside category, and no point of contact information is provided in the solicitation details. Bidders are expected to demonstrate proven experience in military-grade packaging, barcoding systems, and medical device logistics, with the ability to meet exacting standards for labeling and documentation fidelity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Regulatory and Compliance Packaging/Labeling ServicesThe contract requires the provision of military-compliant packaging, labeling, and barcoding services specifically for pharmaceutical products, adhering strictly to Defense Logistics Agency standards and Military Standards for documentation and identification. All work must meet the rigorous regulatory and compliance requirements set by the Department of Defense to ensure uniformity, traceability, and readiness across military medical supply chains. The effort is classified as a subcontract under NAICS code 325991, indicating it involves other pharmaceutical and medicinal product manufacturing activities outside of bulk drug production. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and the contracting office is under the Medical Supply Chain Pharm FSA within the Department of Defense. While specific performance locations and point of contact details are not provided, the services are intended to support military medical logistics operations globally. Compliance with MIL-STD specifications for packaging integrity, label content, and barcode formatting is mandatory, and successful bidders must demonstrate capability to consistently meet these standards under federal oversight.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Medical Packaging and Labeling ServicesThe contract seeks specialized packaging, labeling, and palletization services for medical supplies adhering strictly to Department of Defense standards including MIL-STD-129, RP001, and ASTM D3951, ensuring all items meet the rigorous requirements for military logistics and distribution. Services must be performed to maintain compliance with DLA specifications, covering everything from durable outer packaging and barcoded labeling to standardized pallet configurations that support efficient handling and inventory tracking within the military supply chain. This subcontract is issued by the Department of Defense under the Medical Supply Chain Pharm FSA, with performance required at the Morrisville, North Carolina location, identified by zip code 27560-0000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 325991 for other chemical product and preparation manufacturing. The contract focuses on precision and regulatory adherence, emphasizing consistency, traceability, and readiness for immediate deployment in military healthcare environments.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Pharmaceutical Packaging and Labeling ComplianceThe contract requires compliance with MIL-STD-129 standards for the packaging and labeling of pharmaceutical shipments, ensuring all items are properly marked with required military identifiers including NSN, TCN, and CAGE codes. Traceable barcodes must be applied in accordance with federal and defense logistics specifications to enable accurate tracking and inventory management throughout the supply chain. The work is performed under a subcontract to support the Defense Logistics Agency, with the North American Industry Classification System code 325991 indicating specialized pharmaceutical manufacturing activities. All packaging and labeling activities must meet exacting defense transportation and storage requirements, designed to ensure uniformity, durability, and readability under operational conditions. The contract is tied to the procurement vehicle SPE2DX25D8022 and delivery order SPE2D926F7855, and performance is governed by the strict adherence to Department of Defense logistics protocols, though the specific location of performance is not detailed. The solicitation was posted in August 2026 and does not specify a set-aside classification, indicating it is open to general subcontractors capable of meeting the technical and regulatory demands of military pharmaceutical logistics.

Defense Logistics Agency

POSTED

DEADLINE

Pharmaceutical Packaging and Labeling ServicesThe contract requires the packaging, labeling, and kitting of Amoxicillin tablets to comply with stringent military standards including DLA specifications, MIL-STD-2073-1E, and hazardous material labeling requirements. All work must be performed to ensure the integrity, safety, and regulatory compliance of pharmaceutical products intended for military use, with particular attention to handling, containment, and documentation of controlled substances. The performance location is specified as Fort Lewis, Washington, with a zip code of 98433-9500, and the North American Industry Classification System code is 325991, indicating specialized pharmaceutical manufacturing services. The opportunity is classified as a subcontract under the Department of Defense's Medical Supply Chain Pharm FSA, with a response deadline of August 10, 2026, and a posted date of August 2, 2026. There is no solicitation number provided and no set-aside designation, meaning the contract is open to eligible subcontractors without restrictions based on small business status or other categories. All participants must meet all federal and military regulatory requirements for handling pharmaceuticals and hazardous materials, and any failure to adhere to labeling or packaging protocols may result in rejection of deliverables. The official reference for additional information is available through the DIBBS platform at the provided UI link.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Nonmetallic Seal Manufacturing and SupplyThe contract is for the manufacture and supply of nonmetallic round section seals, including O-rings and gaskets, that meet military specifications and packaging standards under an IDIQ framework. These seals are critical components used in defense applications where reliability and adherence to strict performance criteria are mandatory. The solicitation is structured as a subcontract and is set aside exclusively for Women-Owned Small Businesses, aligning with the WOSB set-aside program to promote diversity and inclusion in defense contracting. The NAICS code 325991 designates the industry as other chemical product and preparation manufacturing, which encompasses the production of specialized elastomeric and nonmetallic sealing products. The procurement is managed by the Land Supply Chain under the Department of Defense and is open for responses through August 17, 2026, with the solicitation posted on August 2, 2026. Performance will be carried out in accordance with federal defense logistics requirements, and all delivered items must comply with specified military standards for material composition, dimensional tolerances, environmental resistance, and packaging to ensure compatibility with existing military systems and supply chains.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical Packaging and Labeling ServicesThe contract seeks qualified subcontractors to provide comprehensive packaging, labeling, and kitting services for medical items according to strict Department of Defense specifications. Services must include accurate expiration dating, detailed lot tracking, and NSN barcoding to ensure full traceability and compliance with military supply chain standards. All work must be performed to meet the rigorous quality and documentation requirements governing medical supplies distributed to U.S. military personnel. The place of performance is designated as APO 09094-3219, and the contract falls under NAICS code 325991 for other pharmaceutical and medicine manufacturing. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026. While the contract is classified as a subcontract, no set-aside provisions apply, and the agency responsible is the Medical Supply Chain MD Surg FSF under the Department of Defense. Prospective bidders must be prepared to adhere to all federal and DOD regulatory guidelines for medical device handling, labeling, and logistics.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

TEST STRIPS, SANITIZING

Solicitation # SPE2DS-26-T-301P

Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-302E

The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-301U

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-300Q

An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-301F

The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, HYDROGEN PEROX

Solicitation # SPE2DS-26-T-300S

The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, CARBON DIOXIDE

Solicitation # SPE2DS-26-T-301A

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-300U

The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

NEEDLE SET, INTRAOSS

Solicitation # SPE2DS-26-T-301Q

The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

GLOVES, CHEMICAL AND

Solicitation # SPE2DS-26-T-300Z

The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

TUBING, ANESTHESIA

Solicitation # SPE2DS-26-T-301G

The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-302G

The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE