Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical-Grade Packaging and Sterile Sealing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the commercial packaging of surgical splash guards in sealed unit containers designed to prevent damage and preserve sterility throughout transit, adhering to military packaging standards. The packaging must ensure the integrity of the medical devices from manufacturing through delivery to the designated performance location at Fort Bragg, North Carolina, with a zip code of 28310. The requirement falls under NAICS code 326199 and is structured as a subcontract opportunity issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a tight turnaround for interested parties to submit proposals. All packaging must meet exacting military specifications to guarantee that the surgical splash guards remain sterile and uncontaminated under operational conditions. While specific performance metrics or volume requirements are not detailed, compliance with military standards is non-negotiable, and delivery must be coordinated to the specified location without deviation. Interested vendors must act within the limited timeframe to respond through the designated DIBBS portal.

General Info

Pack surgical splash guards to military specs for Fort Bragg, deliver by August 3, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Commercial packaging of surgical splash guards in sealed unit containers that protect against damage and maintain sterility during transit, compliant with military packaging standards.

Similar Contracts

Same NAICS industry code

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705 and MIL-STD-2073-1E, specifically to support the shipping of sensitive electronic amplifiers. These packaging solutions must ensure the integrity and protection of electronic components throughout transport and storage under military environmental standards. The solicitation is designated as a total small business set-aside under the SBA program, restricting eligibility exclusively to small businesses as defined by the Small Business Administration guidelines, with the NAICS code 326199 indicating the industry classification for other plastics product manufacturing. The place of performance is clearly identified as Robins Air Force Base with a zip code of 31098-1887, indicating where the packaged materials will be delivered and used. The contract opportunity was posted on July 26, 2026, with a firm response deadline of August 6, 2026, and is categorized as a subcontract under the Department of Defense's Active Devices Division. All proposals must align precisely with the referenced military specifications to ensure compatibility with defense logistics and compliance protocols. The procurement is managed through the DLA DIBBS system, and interested parties must submit responses via the provided online portal before the stated deadline. This opportunity is focused solely on qualified small businesses capable of delivering certified ESD and EMI protective packaging solutions that meet exacting military performance and documentation standards for high-value electronic equipment shipments.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Reclosable Polybag Supply (Medical-Grade)The contract is for the supply of medical-grade reclosable polybags measuring 3x4 inches and 2 mil in thickness, manufactured exclusively from 100% virgin polyethylene to ensure high clarity and consistent quality. Each polybag must feature a white label block for labeling and must be packaged in units of 1,000. The product is required to comply with military packaging and marking standards, ensuring suitability for defense and medical supply chain applications. The items are intended for use in sensitive medical environments where sterility, durability, and traceability are critical. The solicitation is classified as a subcontract under NAICS code 326199 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The response deadline is August 3, 2026, with the opportunity posted on July 26, 2026. Performance is specified to occur at a location in Annville, Pennsylvania, with a zip code of 17003-5003. Participation is open to qualified subcontractors capable of meeting the stringent technical and compliance requirements for military-grade medical packaging.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supplier of Raw Materials or Components for Test KitsThe contract requires the supply of medical-grade plastic and rubber components, including test cassettes and pipettes, with strict adherence to full traceability standards and compliance with defined manufacturing timelines. These components are critical to diagnostic test kits and must meet rigorous quality and regulatory requirements to ensure reliability and safety in clinical and field use. The work is scoped under a subcontract classification with the NAICS code 326199, indicating specialized manufacturing of other plastic products, and is tied to performance at Fort Bragg, North Carolina, with a response deadline of August 3, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain division under the MEDICAL SUPPLY CHAIN MD SURG FSF, signaling its importance to military and federal healthcare operations. All suppliers must demonstrate capability to deliver consistent, high-volume production while maintaining end-to-end documentation and meeting strict quality control protocols.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacturing of Disposable Laboratory Pipets

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Specialized Packaging and Preservation Services

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

ESD/EMI Protective Packaging and Materials Supply

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Molded Skid Assembly ManufacturingThe contract solicits the manufacture and delivery of 115 precision-molded skid assemblies that must fully comply with military specifications, including adherence to DLA quality standards and MIL-STD-130 marking requirements to ensure proper identification and traceability. These assemblies are critical components intended for military use and must be produced to exacting tolerances with documented compliance throughout the production process. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the SBA are eligible to respond, reinforcing support for small business participation in defense contracting. The NAICS code 326199 categorizes this effort under other plastic product manufacturing, indicating the production involves specialized molding processes beyond standard plastic fabrication. The place of performance is specified as Texarkana, Texas, with a zip code of 75507-5000, and the solicitation was posted on July 26, 2026, with a response deadline set for August 6, 2026. The contracting office is listed under the Department of Defense through the RED RIVER RECEIVING BLDG, and all bids must be submitted through the DIBBS platform at the provided link. Participation requires strict adherence to quality control, documentation protocols, and delivery timelines to meet federal defense supply chain requirements.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract seeks the supply of ESD and EMI protective packaging materials compliant with MIL-PRF-81705 standards, specifically Type I ESD barrier and Type III EMI shielding products, all sourced exclusively from suppliers qualified on the QPL-81705 listing. These materials are critical for safeguarding sensitive electronic components from electrostatic discharge and electromagnetic interference during handling, storage, and transport. The requirement is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance expected to be centered in Columbus, Ohio, at the ZIP code 43213. The solicitation, cataloged under NAICS code 326199, has a response deadline of August 6, 2026, with the posting date set for July 26, 2026, indicating a brief but critical window for qualified vendors to submit proposals. The contract emphasizes strict adherence to military specifications and supplier qualification without set-aside provisions, ensuring only fully compliant and vetted sources are considered.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Specialized Packaging for Defense LogisticsThe contract requires the manufacture and supply of medium-duty, waterproof, greaseproof, and opaque packaging bags designed specifically for defense logistics shipments, adhering strictly to the MIL-DTL-117, Type II, Class C, Style 1 military specification. These bags must meet rigorous performance standards to ensure durability, environmental resistance, and complete opacity to protect sensitive contents during transport and storage under demanding conditions. The product is intended for use across military supply chains where reliability and compliance with federal standards are critical. The solicitation is structured as a subcontract under NAICS code 326199, which categorizes it within other plastic product manufacturing, and is issued by the Department of Defense through its LAND SUPPLY CHAIN organization. The opportunity was posted on July 26, 2026, with a response deadline of August 6, 2026, leaving a limited window for qualified vendors to submit proposals. Though no specific place of performance or point of contact details are provided, the contractual obligations center on delivering fully compliant packaging at scale to support national defense logistics operations. Subcontractors must ensure adherence to all technical requirements without deviation to qualify for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

UVEX GENESIS CLEARThe contract specifies the procurement of 20 units of UVEX GENESIS CLEAR protective eyewear under NSN 4240-01-552-4142, with a unit price of $20.00 and a total contract value of $400.00. Delivery is required within 20 days from the contract award, FOB origin, with no allowance for quantity variance. The product must be approved by the U.S. Army and listed on the Authorized Protective Eyewear List (APEL), ensuring compliance with military safety standards. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging requirements. The item is not classified as hazardous, but shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery address in Grand Prairie, Texas. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers, and is subject to the revision in effect on the solicitation issue date. The sole source supplier is Honeywell Safety Products USA, Inc. under part number S3200HS. The solicitation number is SPE8E9-26-T-3251, issued by the Department of Defense under the Construction & Equipment MRO Service I office, with a response deadline of August 6, 2026, and a posted date of July 26, 2026. The NAICS code is 326199, and the point of contact is Matthew Kruc, with email and phone provided for inquiries. Inspection and acceptance occur at the destination, and the item is marked for delivery to the specified government logistics point W806DX. The contract includes a required delivery date of April 26, 2024, referenced for planning purposes, and the project code TP3 is referenced for tracking. All documentation and compliance must align with DoD procurement protocols, including the use of authorized units of issue and proper marking for federal logistics systems.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

CUP, SPECIMENThe contract specifies the procurement of sterile screw-top specimen containers, each with a 4.0 ounce capacity, packaged in blister packs and made of plastic. The unit of issue is a pack of 100 units, and the product must have a shelf life of 60 months, with no more than nine months having passed between the date of manufacture and the date of delivery to the government. All labeling must comply with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must be commercial in nature, ensuring the contents are protected from damage, and units must be packed in suitable exterior shipping containers capable of safe transit at the lowest possible cost to the delivery point designated in the contract. All items must be marked in accordance with the Medical Marking Standard No. 1, and technical and quality requirements referenced in the DLA Master List apply. The NSN/part number is 6530-01-375-0171, with one pack of 100 units required, and delivery must occur within five days of award. The solicitation number is SPE2DH-26-T-5502, with a response deadline of August 3, 2026, and the point of performance is Groton, Connecticut. Bidders are required to specify the source and part number being offered.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SKID, MOLDEDThe contract specifies the procurement of 115 molded skid assemblies under solicitation number SPE8E6-26-T-3868, with a total small business set-aside designation and a North American Industry Classification System code of 326199. The item is identified by NSA part number 6920-01-168-6145 and must be delivered within 144 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and all items must be marked in compliance with MIL-STD-130, including the contract number, lot number, vendor name (optional), vendor serial number, and vendor CAGE code. Government identification must be removed from non-accepted supplies. Quality requirements for both manufacturers and non-manufacturers are tailored at the contract level. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the place of performance is Texarkana, Texas, with the Department of Defense via the Red River Receiving Building as the contracting organization. Primary point of contact is Sophia Lim, reachable via email and phone provided.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Logistics and Delivery to Camp Lejeune

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling Services

Environmental Consulting Services

POSTED

DEADLINE

Dental Bristle Brush Supply and Packaging

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Medical Product Labeling and Bar-CodingThe contract requires the application of MMS No. 1-compliant labels and barcodes to medical products and their packaging for delivery to the Department of Defense, ensuring full adherence to federal hazard communication standards. This includes accurate labeling for safety, identification, and tracking, with all markings meeting strict military specifications for legibility, durability, and regulatory compliance. The work must be performed in alignment with the MMS No. 1 standard, which governs the formatting, content, and placement of labels on medical items intended for DoD use. The solicitation is classified as a subcontract under NAICS code 323121, reflecting its focus on printing and related support activities. It is open for responses until August 3, 2026, with performance destined for APO 09227-0000. The activity is managed by the Medical Supply Chain MD Surg FSF within the Department of Defense, and bidders must ensure their processes support end-to-end traceability and compliance with military supply chain requirements for medical logistics.

Tradebinding and Related Work

POSTED

DEADLINE

Hazardous Materials Packaging and PreservationThe contract requires the design and supply of specialized packaging systems compliant with MIL-STD-2073-1E and DLA RP001 standards to preserve frozen human serum controls during international transport, ensuring a guaranteed 24-month shelf life under controlled conditions. The packaging must be engineered to maintain cryogenic integrity throughout shipment, withstand extreme environmental stresses, and meet strict hazardous materials handling protocols for global logistics. The solution must integrate robust thermal insulation, impact-resistant materials, and validated cold chain technologies to prevent degradation of the serum controls from production to final use. Performance is centered on the APO 09227-0000 location with delivery expected to support Department of Defense medical supply chains, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF. The effort falls under NAICS code 322291, indicating classification as other paper product manufacturing, and is structured as a subcontract opportunity with a narrow response window closing on August 3, 2026. All packaging systems must undergo rigorous validation to prove consistent performance across diverse climate zones and extended transit times, with compliance documentation and testing reports required to demonstrate adherence to military and logistics preservation standards without exception.

Sanitary Paper Product Manufacturing

POSTED

DEADLINE

Cold Chain Logistics and Specialized TransportationThe contract encompasses the specialized transportation of frozen biological materials requiring strict temperature control between -20°C and -70°C, moving these sensitive payloads from the manufacturer to APO and various locations in Germany. This subcontract mandates the use of certified, temperature-monitored freight services to ensure the integrity and safety of the biological materials throughout transit, with compliance to stringent cold chain protocols being non-negotiable. The logistics operation must guarantee uninterrupted thermal stability, real-time monitoring, and documented evidence of temperature adherence at every stage of the journey. Issued under the NAICS code 484220 for specialized freight transportation, this solicitation is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. The response deadline is August 3, 2026, with performance centered on the APO ZIP code 09227-0000 as the primary point of delivery, alongside multiple endpoints in Germany. The nature of the cargo demands end-to-end traceability, secure handling procedures, and adherence to federal regulations governing the transport of biohazardous and thermally sensitive medical materials, making this a high-stakes logistics engagement requiring certified expertise in pharmaceutical and biological cold chain distribution.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacturer of Assayed Human Serum ControlsThe contract requires the manufacture of liquid human serum-based, level 3 assayed controls containing over 50 analytes for use in clinical chemistry testing, with strict adherence to FDA compliance standards and certified assay accuracy to ensure reliable diagnostic performance. The controls must meet rigorous quality benchmarks to support clinical laboratories in maintaining precision and traceability across a broad spectrum of biochemical parameters. The solicitation is issued under the Department of Defense’s Medical Supply Chain MD Surg FSF as a subcontract, with a response deadline of August 3, 2026, and a place of performance designated as APO 09227-0000. The North American Industry Classification System code 325414 identifies the work as falling under pharmaceutical and medicinal chemical manufacturing, emphasizing the need for specialized expertise in biological product formulation. All deliverables must be fully compliant with regulatory requirements, and the manufacturer is expected to demonstrate proven capability in producing high-integrity analytical controls under controlled conditions.

Biological Product (except Diagnostic) Manufacturing

POSTED

DEADLINE

Unable to identify sub-opportunities due to insufficient dataThe contract is a subcontract opportunity issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, with a posted date of July 26, 2026, and a response deadline of August 3, 2026. The place of performance is located in Annville, Pennsylvania, with a zip code of 17003-0000, though no additional details are provided regarding the office address or point of contact. The solicitation number is not available, and the NAICS code is listed as NA, indicating incomplete or missing classification data. The type of set aside and its description are also undefined, making it unclear if any small business or other socioeconomic preferences apply. Critical elements necessary for evaluating the opportunity—including the Statement of Work, Contract Line Item Numbers, and pricing structure—are insufficiently documented, severely limiting the ability to identify potential subcontract or supplier engagements. Without these core components, bidders cannot assess the scope, deliverables, or financial terms. The only available reference is a DIBBS link for the solicitation, but the lack of essential information renders the opportunity unactionable for most interested parties until further details are released.

POSTED

DEADLINE

Hazardous Materials Logistics & DeliveryThe contract pertains to the transportation of medical supplies classified as hazardous materials, requiring full compliance with all applicable federal regulations governing the safe handling, labeling, and movement of such substances. Delivery must be executed under FOB Destination terms, meaning ownership and risk transfer to the recipient only upon arrival at the specified destination, Fort Stewart, GA, with the contractor responsible for all logistics, documentation, and safety protocols until the cargo is received. The work falls under NAICS code 484220, indicating it involves specialized freight transportation services, and is structured as a subcontract within the Department of Defense’s Medical Supply Chain framework. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and performance must align with federal standards and the specific needs of the Fort Stewart installation, identified by the zip code 31314-5185.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Medical Device Packaging & Labeling ServicesThe contract requires the packaging and labeling of oxygen masks in full compliance with DLA standards, specifically under MMS No. 1, ensuring all items are properly barcoded and equipped with lot traceability for end-to-end supply chain visibility. Rejected items must have all government markings removed prior to disposal or return, maintaining strict adherence to security and compliance protocols. The work is classified as a subcontract under the NAICS code 325991 and is tied to the Department of Defense’s Medical Supply Chain division, with performance designated to occur at Fort Stewart, Georgia, 31314-5185. All proposals must be submitted by August 3, 2026, following the solicitation posted on July 26, 2026. The contract is part of a broader medical logistics initiative managed by the Defense Logistics Agency, emphasizing precision in packaging, labeling, and traceability for critical medical devices used in military healthcare operations. Compliance with regulatory and procedural requirements is essential, and failure to meet packaging, marking, or traceability standards may result in rejection of delivery. The effort supports assured readiness of life-sustaining equipment for deployed personnel.

Custom Compounding of Purchased Resins

POSTED

DEADLINE

Regulatory Compliance & Safety Data DocumentationThe contract requires the preparation and submission of Material Safety Data Sheets MSDS hazard labels and related compliance documentation to meet the stringent requirements of DFARS 252.223-7001 and OSHA standards ensuring all chemical and material safety information is accurately documented and properly labeled for DoD supply chain use. This work is critical for ensuring regulatory adherence across the medical supply chain and includes generating hazard communication materials that align with federal mandates for workplace safety and defense logistics. The solicitation is categorized as a subcontract under NAICS code 541690 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF with performance required at Fort Stewart Georgia 31314-5185. The response deadline is August 3 2026 and the solicitation was posted on July 26 2026. All submissions must demonstrate full compliance with federal regulations regarding chemical safety disclosures and labeling protocols with an emphasis on precision and timeliness to support DoD operational readiness and safety obligations.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Disposable Rebreathing Oxygen Mask ManufacturingThe contract seeks the manufacture and supply of disposable adult rebreathing oxygen masks that meet strict technical specifications outlined by the Defense Logistics Agency, identified by NSN 6515-01-519-6766. These masks must comply with rigorous standards for material safety, biocompatibility, and packaging to ensure clinical effectiveness and patient protection. All products are intended for use in military medical environments and must adhere to performance and quality benchmarks established by the Department of Defense. The place of performance is designated as Fort Stewart, Georgia, with deliveries expected to support ongoing medical supply operations at this location. This is a subcontract opportunity under the NAICS code 339112, which pertains to medical equipment and supplies manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, allowing qualified manufacturers a limited window to submit proposals. While the solicitation number is not provided, interested parties can access further details through the official DIBBS portal using the provided link. This procurement is part of the Medical Supply Chain under the Department of Defense, ensuring that frontline medical personnel have reliable, single-use oxygen delivery systems consistent with military health and safety mandates.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE