This Sources Sought opportunity from Department Of Defense was posted on May 13, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Medical OCP Scrubs

Closed

PANNGB-21-P-0000009117Federal

Submission Closed05/18/2021, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

Supply of Oxygen Reservoir KitsThis subcontract involves the supply of two 3-liter oxygen reservoir kits designed for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain contracts. The kits must be constructed from medical grade materials and be specifically compatible with the EMV Plus volume ventilator system. All deliverables must adhere to Medical Marking Standard No. 1 for packaging and marking requirements. The opportunity is categorized under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Large Vascular Shunt (NSN 6515-01-468-7929)This subcontract, issued by the Department of Defense Medical Supply Chain, requires the delivery of one Large Vascular Shunt identified by NSN 6515-01-468-7929. The contract is designated under NAICS code 339113 and is intended for prime contractors fulfilling DLA supply contracts, with the place of performance located at FPO 96616. The supplier must adhere to strict technical and regulatory standards, including packaging per ASTM D3951 and marking and preservation according to MIL-STD-129 and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. The response deadline for this requirement is November 4, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1454

Solicitation SPE7M4-27-T-1454, issued by the DLA Weapons Support Fluid Handling Division, seeks quotations for 17 safety relief valves under NSN 4820-01-385-0125. The procurement falls under NAICS 339113, with a required delivery date of July 12, 2029, and a delivery period of 699 days. Items are to be delivered FOB Origin to DLA Distribution Depot Hill in Utah. Inspection and acceptance will also occur at the origin in accordance with FAR 52.246-2. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. This is a restricted source item requiring government design control activity engineering source approval. Contractors must comply with strict data security and export controls, including CMMC Level 2 certification and adherence to ITAR or EAR regulations. A Boeing Rights Guard License Agreement is in effect, necessitating specific non-disclosure and data destruction protocols. Additionally, offerors must comply with the Buy American Act and DFARS 252.225-7036. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of NIV Associated ConsumablesThis subcontract focuses on the supply of Non-Invasive Ventilation associated consumables for prime contractors working on projects for the Belfast Health & Social Care Trust. The scope of work involves the ongoing delivery of recurring disposable and replaceable components, including filters, tubing, masks, and other patient-specific consumables. All provided items must adhere to strict sterile packaging standards and be manufactured from medical grade materials. The contractor is responsible for the direct delivery of these essential medical supplies to either clinics or individual patients. This procurement opportunity is categorized under NAICS code 339113, with a response deadline set for November 30, 2026.

Belfast Health & Social Care Trust

POSTED

DEADLINE

Supply of Pressure Sensitive FME Tape (NSN 7510LLS053498)This small business set-aside subcontract through DLA Maritime Puget Sound involves the supply of 800 rolls of pressure-sensitive FME tape, identified by NSN 7510LLS053498. The required material is a cotton or plastic coated silver tape measuring 3 inches by 60 yards with a thickness of 13mm, designed to meet specific heat and cold resistance standards. Performance will take place in Bremerton. The contractor must maintain QPL status and ensure full compliance with C542 mercury exclusion standards. All items must be packaged according to MIL-STD-130 and MIL-STD-129 regulations. Final delivery requires the 800 rolls of tape accompanied by a Certificate of Compliance as specified by DI-MISC-81356A.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Supply and Fabrication of Dispersive MirrorThis subcontract involves the fabrication and supply of a high-precision dispersive mirror for prime contractors working on Department of Energy projects at the SLAC National Accelerator Laboratory in Menlo Park. The contractor is responsible for manufacturing one new, defect-free mirror using high-precision optical glass and specialized coatings, strictly adhering to provided technical design engineering documentation. The agreement requires strict regulatory compliance, specifically certifying adherence to ITAR USML regulations and the 10 CFR 110 Nuclear Trigger List. Classified under NAICS code 339113, the project ensures the delivery of a genuine component meeting all specified technical and legal standards for use within the national laboratory.

Slac National Accel Labor -Doe Contractor

POSTED

DEADLINE

Trauma Manikin Supply & SupportThis small business set-aside subcontract, managed by the Department of Defense under the W7NC Uspfo Activity Me Arng, involves the supply and support of weighted trauma manikins for US Army New England CERFP EXEVAL projects. The contractor is responsible for providing 20 weighted manikins with a distribution across adult, child, and infant weights, all of which must be delivered and positioned at the designated venue. The scope of work includes applying detailed, scenario-specific moulage such as chemical burns, abrasions, compression wounds, and general trauma. Additionally, the contractor is tasked with managing the placement and rotation of these manikins to align with the specific pacing of the exercise.

W7NC Uspfo Activity Me Arng

POSTED

DEADLINE

Overhead Track System

Solicitation # SRC0000042426

Solicitation SRC0000042426 is issued by the Ohio Early Learning Administration for the procurement of a mobility device overhead track system, specifically a Solo-Step System, to be installed in an activity room at the Ohio State School for the Blind. The project is designated as a Minority Business Enterprise set-aside, though it was opened to the public for a second round of bidding. The required equipment includes a 12 by 12 inch oval switch system, trolley accessories, a 10 foot 4 inch ceiling height lanyard, and a universal small harness. The total estimated value based on previous quotations is 27,700 dollars, and bidders must provide pricing at or below the provided quote. The scope of work requires a turn-key ready system delivered to the facility in Columbus, Ohio. Installation must adhere to specific anchorage details and general safety regulations, and all products must be inspected prior to installation. Interested bidders were encouraged to schedule onsite visits with Daric Scott to ensure accuracy in their proposals. Selection will be awarded to the lowest responsive and responsible MBE quote. The solicitation response deadline is November 5, 2026.

Osb501000 Early Learning Admin Elc

POSTED

DEADLINE

Solicitation # Project_801958

The Ministry of Defence, through UK Defence Innovation, is conducting a request for information to explore the market for next-generation Strategic Air Transport Isolators. This pre-market engagement aims to verify current market capabilities, capacity, and interest while identifying suppliers with existing or developing ATI products. The goal is to ensure the feasibility of requirements and design an effective competitive procedure for future procurement to support the Deployable Air Isolator Team. The required equipment must provide resilient, assured, and interoperable capabilities for the global strategic aeromedical evacuation of patients with High Consequence Infectious Diseases from the point of injury back to UK NHS High Level Isolation Units. This system must function in both permissive and austere environments while maintaining interoperability with the NHS. Interested parties must submit a response via the provided MS Forms questionnaire by December 11, 2026, though participation does not act as pre-qualification or impact the ability to compete in future procurement processes.

POSTED

DEADLINE

Neurosurgical Burrs and Drill Bit SupplyThis subcontract agreement involves the supply of specialized neurosurgical cutting tools and drill bits for prime contractors working on procurement projects at SUNY Upstate Medical University. The scope of work includes providing diamond, carbide, fluted, and saber shank burrs that are compatible with Elite Core TPS and Midas Rex Zimmer Ultrapower TPS systems. All delivered equipment must meet strict technical dimensions to ensure surgical precision and safety. To qualify, providers must be authorized to sell Premier contract products or be capable of providing clinical equivalents along with the necessary trial equipment. The solicitation was posted on October 30, 2026, with a response deadline of November 23, 2026, falling under NAICS code 339113 for the State University of New York.

State University of New York (SUNY)

POSTED

DEADLINE

Emergency Generator Parts and Consumables SupplierThis subcontract agreement establishes a partnership for the supply of OEM replacement parts and consumables essential for the maintenance of emergency generators at the Maryland Department of Health Springfield Hospital Center. The scope of work includes the provision of specialized components such as contacts, fuses, timers, leads, lubricants, and generator brushes, ensuring all materials are specifically designed for the on-site equipment. The supplier is required to deliver all replacement parts along with the corresponding manufacturer invoices while strictly adhering to sustainable packaging guidelines that prohibit the use of polystyrene and heavy metals. This procurement effort falls under NAICS code 339113 and is managed through the Maryland General Administration for the Springfield Hospital Center.

09001-general Administration - Springfield Hospital Center

POSTED

DEADLINE

Medical Device Supply (NSN 6530016456923)This subcontract involves the manufacture and supply of specific medical devices, identified by NSN 6530016456923, for prime contractors supporting DLA Medical contracts. The required devices must measure 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a lift-off cover and a securable cap. All items must adhere to Medical Marking Standard No. 1 and maintain strict compliance with FDA Regulation 880.5570 Class II. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 339113. Performance of the contract will take place in Fort Bliss, Texas. The solicitation was posted on October 29, 2026, with a response deadline set for November 5, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

2 days ago

DEADLINE

in 5 days

General Info

Agency

Department Of Defense → W7MX Uspfo Activity Ca Arng

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

Benicia, CA, 94510, USA

Set-Aside

NONE

Documents

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 13

Sources Sought

Response DeadlineMay 18

Deadline has passed

Submission Closed

05/18/2021, 11:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7MX Uspfo Activity Ca Arng

Contacts1 person available

OfficeSAN MIGUEL, CA, 93451-5000, USA

Organization / AgencyDepartment Of Defense → W7MX Uspfo Activity Ca Arng

Office AddressSAN MIGUEL, CA, 93451-5000, USA

Contacts

Grace Marquez

contact@example.gov

+1 (555) 000-0000

Full Description

This is a sources sought notice only and it is not a solicitation announcement. The purpose of this sources sought notice is to gain knowledge of qualified, potential contractors and their socio-economic size classification in accordance with NAICS code 339113 Surgical Appliance and Supplies Manufacturing. Responses will be used by the Government to make appropriate acquisition decisions. After a review of the responses to this sources sought notice, a solicitation announcement may be posted. A response to this sources sought notice is not an adequate reply to a potentially forthcoming solicitation. The California Army National Guard is seeking vendors that can provide medical scrubs in varies sizes that comes in Operation Camouflage Pattern (OCP). No reimbursement will be made for any costs associated with providing information in response to this Sources Sought and no contract will be directly awarded on the basis of this sources sought. Any information submitted by respondents to this Sources Sought shall be voluntary. To respond to this sources sought notice, please complete the attached form titled "Response Form - OCP Medical Scrubs"; you may include a brief 1-2 page capabilities statement. Email the information requested to SSG Marquez, Grace, Contract Specialist, at contact@example.gov. Please reference PANNGB-21-0000 009117 Medical OCP Scrubs in the subject of the email. The closing date and time of this sources sought notice is May 18, 2021 at 7:00 PM Pacific Standard Time. This is not a solicitation and in no way obligates the Government to award any contract.