Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Packaging and Kitting Services

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails providing secondary packaging, kitting, and labeling services for surgical sponges, ensuring they are assembled into sealed envelopes, boxes, and unit-of-issue packages compliant with military standards. All packages must include accurate barcoding and adhere to federal labeling requirements for defense supply chain use, with specific attention to traceability and durability under operational conditions. The work will be performed at MC GUIRE AFB, ZIP 08641-5300, and falls under NAICS code 323110, categorizing it as a medical equipment and supplies manufacturing subcontract. Responses are due by July 27, 2026, with the opportunity posted on July 21, 2026, under the Department of Defense’s Medical Supply Chain MD Surg FSF. Participation is restricted to subcontractors capable of meeting stringent military compliance protocols for medical device packaging and logistics readiness.

General Info

Provide military-compliant surgical sponge packaging with barcoding at MC GUIRE AFB by July 27, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

323110 - Commercial Lithographic PrintingView NAICS

Place of Performance

MC GUIRE AFB, NJ, 08641-5300, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Secondary packaging, kitting, and labeling of surgical sponges into sealed envelopes, boxes, and unit-of-issue packages with barcoding and military labeling compliance.

Similar Contracts

Same NAICS industry code

Rush and On-Demand Printing ServicesThe City of Atlanta is seeking qualified vendors to provide rush and on-demand printing services for time-sensitive materials such as emergency notices, urgent correspondence, and last-minute invitations that require production within a 24- to 72-hour window and coordinated delivery. This subcontract opportunity, categorized under NAICS code 323110 for printing and related support activities, is open for responses until August 5, 2026, with proposals due by 7:00 PM local time. The work must be performed in Georgia and is intended to support critical communications needs across city operations. Vendors must demonstrate the ability to reliably deliver high-quality printed materials on tight deadlines, ensuring timely and accurate fulfillment of urgent requests without delay.

City of Atlanta

POSTED

about 20 hours ago

DEADLINE

High-Volume Commercial Printing ServicesThe City of Atlanta is seeking qualified vendors to provide high-volume commercial printing services for public communication materials including water quality reports, utility bill inserts, brochures, and official letters. The work requires offset or digital printing with strict adherence to color accuracy and consistent batch-to-batch quality to ensure professional, reliable outputs across thousands of units. This subcontract opportunity is open for bids with a response deadline of August 5, 2026, and is classified under NAICS code 323110 for commercial printing. All materials must be produced to meet the agency’s standards for clarity, durability, and visual consistency, with an emphasis on large-scale production capabilities. Bidders should demonstrate experience handling similar public sector printing projects requiring precision and timeliness. The place of performance and specific delivery requirements are not detailed, but successful contractors will be expected to manage logistics, quality control, and scheduling to support the agency’s ongoing public outreach efforts.

City of Atlanta

POSTED

about 20 hours ago

DEADLINE

IFB/GS/DWM/ATLDOT/2607-1270006/Specialized Printing ServicesThe City of Atlanta’s Department of Watershed Management and Department of Transportation are seeking specialized printing, mailing, and fulfillment services to support high-volume public communication efforts, including annual water quality reports, monthly bill inserts, brochures, postcards, letters, invitations, and time-sensitive rush requests requiring precise turnaround and coordinated delivery. Vendors must demonstrate proven capacity for large-scale production, efficient mailing operations, and list maintenance to reliably meet recurring and urgent deadlines throughout the fiscal year, ensuring timely and accurate dissemination of critical public information. All interested suppliers are required to register as a vendor on the official supplier portal at https://www.atlsuppliers.com/ to access the full solicitation and submit proposals. The solicitation, identified as PE-66062-NONST-2027-000000457, was posted on July 23, 2026, with responses due by August 5, 2026, and all work performance is expected to occur within the state of Georgia. Primary contact for inquiries is Lyndon McCluskey at lmccluskey@atlantaga.gov or 470-442-2857.

City of Atlanta

POSTED

about 20 hours ago

DEADLINE

Printing, Mail/Translation ServicesThe District of Columbia’s Employment Services agency has issued a forecast for printing, mailing, and translation services to support its operational needs. This upcoming procurement is intended to secure vendors capable of delivering professional print production, reliable postal distribution, and accurate multilingual translation services to meet the agency’s communication and outreach requirements. The solicitation is posted as a forecast with no specified solicitation number, indicating it is a preliminary notice to allow potential contractors to prepare for a future formal request. The services will be performed within the District of Columbia, though exact performance locations are not defined, and there are no set-asides or NAICS codes provided at this stage. No point of contact information is listed, and interested parties are directed to the official portal for updates as the procurement progresses toward a formal solicitation.

Employment Services (DOES)

POSTED

DEADLINE

MIL-STD Compliant Packaging and Marking ServicesThis contract requires the provision of military-standard packaging and labeling services for fastener shipments destined for the Defense Logistics Agency, adhering strictly to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, with all items properly marked by National Stock Number. The work must be performed under a total small business set-aside, designated under the SBA program, and is classified under NAICS code 323110, indicating the scope involves printing and related support activities aligned with defense supply requirements. The contract is structured as a subcontract and is open for response until July 27, 2026, with all performance expected to meet exacting U.S. Department of Defense standards for traceability, durability, and compliance in logistics environments. The solicitation is managed by the ASC Commodities Division and is accessible through the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract requires specialized commercial packaging and preservation of medical supplies in sealed unit containers that meet the stringent standards of MIL-STD-2073-1E and the Medical Marking Standard No. 1, ensuring protection during transit and compliance with military logistics requirements. The work involves precise packaging techniques to maintain sterility and integrity of medical items through handling, storage, and shipment, with all labeling and marking conforming to federally mandated specifications for military medical supply chains. This subcontract opportunity is issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance located in San Antonio, Texas, 78226. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, with the NAICS code 323110 indicating it falls under the Printing and Related Support Activities category, reflecting the technical nature of the packaging and marking processes required. Only qualified vendors capable of meeting exacting military packaging standards are eligible to respond.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military Packaging & Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services in full compliance with MIL-STD-129 standards for military shipments, ensuring all items are properly identified and tracked through durable barcoding systems. All work must adhere to the Defense Logistics Agency's Packaging Requirements for Procurement, Document RP001, which dictate material durability, label placement, and marking accuracy to support logistics and inventory management across the Department of Defense. The services are part of a subcontract under the ASC Commodities Division, with performance required at the specified location in New Cumberland, Pennsylvania, 17070-5002, and must be delivered by the response deadline of July 30, 2026. The NAICS code 323110 identifies the work as printing and related support activities, indicating that the focus includes high-volume, precision labeling and marking operations tailored to military specifications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Label Manufacturing and Packaging

BARSTOW CENTRAL RECEIVING WHSE

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging and labeling services that fully comply with military standards, including moisture protection, certified labeling, and the use of removable tags to meet rigorous operational and logistical demands. All packaging must be designed and executed to ensure product integrity under adverse environmental conditions, with strict adherence to authorized certification protocols and documentation requirements. The work is classified as a subcontract under NAICS code 323110 and is being managed by Marcor Syscom on behalf of the Department of Defense, with performance specifically designated to occur in Natick, Massachusetts, at ZIP code 01760. Responses must be submitted by August 22, 2026, at 3:59 AM EDT, with no set-aside classification specified, indicating open competition among eligible subcontractors.

POSTED

DEADLINE

Packaging and Preservation of Military MaterielThe contract requires the provision of packaging solutions for military materiel that strictly adhere to MIL-STD-2073-1E standards, ensuring all defense components are protected through proper interior preservation techniques to maintain operational readiness during storage and transport. This includes the application of corrosion inhibiting materials, desiccants, and other approved preservation methods tailored to the specific environmental and handling requirements of sensitive equipment. Full compliance documentation and certifications must accompany each shipment to verify adherence to federal military specifications, and all packages must be labeled with pre-paid return shipping labels to facilitate efficient reverse logistics for inspection, repair, or redistribution. The work is executed under a subcontract through the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 323110 indicating the focus on printing and related support activities that align with packaging and labeling requirements. The contract spans a timeframe beginning in July 2026 and applies to performance across unspecified locations, requiring the contractor to meet all federal compliance, quality assurance, and delivery obligations without reliance on site-specific infrastructure. Return logistics are an integral part of the scope, ensuring closed-loop material management and accountability throughout the lifecycle of the packaged defense items.

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Labeling ServicesThe contract enables specialized packaging, barcoding, and labeling services to support defense logistics operations with strict compliance and full traceability requirements. It is issued under the Department of Defense through the Defense Logistics Agency and falls under the NAICS code 323110, indicating it relates to commercial printing, specifically tailored to meet military standards for asset identification and supply chain integrity. The work is performed as a subcontract and is designed to ensure accurate, auditable labeling and packaging of defense materiel in alignment with federal and DoD mandates. Although specific performance locations and point of contact details are not provided, the contract is active and accessible via the DIBBS system under award number SPE4A626PB718, with a posting date of July 21, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Medical Device Packaging and Preservation Services

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.

Corrugated and Solid Fiber Box Manufacturing

POSTED

DEADLINE

CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE