Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Packaging and Labeling Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging, labeling, and marking services for medical items in full compliance with Defense Logistics Agency standards, emphasizing traceability, lot control, and adherence to all applicable regulatory requirements. All work must be performed to ensure medical supplies are properly identified, documented, and prepared for distribution within the Department of Defense supply chain, with strict attention to accuracy and accountability at every stage. The solicitation is classified as a subcontract under NAICS code 325992, with a response deadline of August 10, 2026, and a posting date of August 2, 2026. Performance is specifically mandated to occur at Quantico, Virginia, with a zip code of 22134-6062. The contracting organization is the Medical Supply Chain MD Surg FSF under the Department of Defense, and all activities must align with DLA protocols to support military medical readiness and operational logistics needs.

General Info

Packaging and labeling medical supplies per DLA standards at Quantico, VA, for DoD supply chain use by August 10, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325992 - Photographic Film, Paper, Plate, Chemical, and Copy Toner ManufacturingView NAICS

Place of Performance

QUANTICO, VA, 22134-6062, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Contract packaging, labeling, and marking of medical items per DLA standards including traceability, lot control, and regulatory compliance.

Similar Contracts

Same NAICS industry code

Brand Name Only Toners for DLA Distribution

Solicitation # SP330026Q5005

This contract establishes a single-award, indefinite delivery indefinite quantity (IDIQ) agreement for the procurement of new, never-used, brand-name-only toner cartridges compatible with printers from approved manufacturers including Konica Minolta, Kyocera, Ricoh, Hewlett Packard, Lexmark, and Xerox. The contract is structured as a fixed-price vehicle with firm fixed-price delivery orders, covering five sequential one-year ordering periods from September 28, 2026, through September 27, 2031. All items must be original equipment manufacturer (OEM) products, and re-manufactured, re-furbished, or clone cartridges are strictly prohibited. Deliveries must meet strict performance standards, ensuring no printer jams, delays, or damage, and all products must comply with the detailed specifications outlined in Attachment 01, the Schedule of Supplies, which lists over seventy contract line item numbers (CLINs). The contract requires full supply chain traceability, mandating documentation that verifies the origin and authenticity of each cartridge from manufacturer to government acceptance, and prohibits the use of additive manufacturing unless explicitly authorized. The solicitation is a total small business set-aside under NAICS code 325992 with a size standard of 1,500 employees, and all offerors must certify their small business status. Quotations must be submitted electronically via email by August 7, 2026, and are evaluated under a pass/fail technical and past performance regime, with award going to the lowest-priced acceptable offeror under FAR Part 12. Each quotation must be organized into three separate files covering technical capability, past performance, and pricing with administrative data. Packaging and shipping must conform to ASTM D3951-10 and MIL-STD-129R/P standards, with all shipments marked with required identifying data including contract number, delivery order number, stock number, and unit of issue. Invoicing and payment must be processed through the Wide Area Workflow (WAWF) system, and all items are delivered FOB destination. Contractors are subject to Buy American requirements, cybersecurity compliance under NIST SP 800-171, and restrictions on the use of fluorinated firefighting agents, and must represent their compliance with SAM, CUI, and exclusion screening requirements. The contract includes numerous incorporated clauses from FAR, DFARS, and DLA directives governing pricing, modifications, subcontracting, transportation, security, and representation,

DLA Distribution

POSTED

about 19 hours ago

DEADLINE

Supply of Aircraft Turbine Engine Lubricating OilThe contract requires the procurement and delivery of 82 quarts of military-spec lubricating oil designated by NSN 915002732388 to the USS GEORGE H.W. BUSH (CVN 77) located in Norfolk, Virginia, with a firm delivery deadline of August 17, 2026. The lubricant must fully comply with applicable military performance specifications or original equipment manufacturer standards, ensuring compatibility and operational safety for aircraft turbine engines. All packaging, labeling, and accompanying documentation must meet strict regulatory requirements to guarantee traceability and conformity. The transaction is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and falls under the NAICS code 325992 for other chemical product and preparation manufacturing. The delivery must be executed without delay to support fleet readiness, and all invoicing must align with the precise contractual terms to facilitate timely payment and compliance verification.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Gram Staining Kit ComponentsThe contract involves the manufacture and supply of critical chemical reagents for Gram Staining Kits, specifically Crystal Violet Stain, Iodine Solution, Alcohol as a decolorizer, and Safranin Stain, all of which must meet stringent quality and regulatory standards. Each batch of reagents requires full traceability to ensure consistency, purity, and compliance with applicable medical and laboratory protocols, with documentation supporting every stage of production and delivery. The components are intended for use in diagnostic and clinical environments under the authority of the Department of Defense’s Medical Supply Chain. This is a subcontract solicitation posted on August 2, 2026, with responses due by August 10, 2026, under NAICS code 325992 for other chemical product and preparation manufacturing. The place of performance is designated as FPO with ZIP code 96661, indicating delivery to military medical facilities operating in overseas or expeditionary settings. The agreement is managed under the agency designation MEDICAL SUPPLY CHAIN MD SURG FSF, and suppliers must ensure adherence to defense-specific logistical, quality, and regulatory requirements without exception, especially concerning the handling, labeling, and shipping of hazardous chemicals in compliance with military supply chain protocols.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

NSN Item Supply / ManufacturingThe contract pertains to the supply or manufacture of NSN 4820012839425, a hazardous fire suppression agent, requiring strict adherence to Department of Defense specifications and delivery protocols. The item is classified under NAICS code 325992, indicating it falls within other chemical product and preparation manufacturing, and is being procured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the place of performance is designated as FPO, ZIP 96643, indicating delivery to a military postal location, likely supporting overseas or deployed operations. Compliance with all federal and DoD regulatory standards for hazardous materials handling, packaging, and transportation is mandatory, and the contractor must ensure the product meets exact performance, safety, and quality benchmarks required for military use.

Defense Logistics Agency

POSTED

DEADLINE

Flammable Medical Cleaning Agent SupplyThe contract requires the supply of a specific FDA-regulated, flammable medical cleaning agent identified by NSN 6505-01-654-9628, with strict adherence to HAZMAT-compliant handling procedures throughout procurement, storage, and delivery. An EBS referral confirmation is mandatory prior to fulfilling the order, ensuring proper authorization and regulatory alignment for this hazardous material. The solicitation is structured as a subcontract under the Department of Defense, managed by the Medical Supply Chain Pharm FSA, with performance required at JBER, Alaska, ZIP 99506-4400. The NAICS code 325992 indicates classification within other chemical product and preparation manufacturing, and all responses must be submitted by the deadline of August 10, 2026, with the opportunity posted on August 2, 2026. Compliance with federal safety and transportation standards for flammable substances is non-negotiable, and failure to meet these requirements will result in disqualification.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract requires commercial packaging and labeling of chest drain units in strict compliance with Medical Marking Standard No. 1, ensuring all units are properly marked with expiration date, lot number, contract number, and manufacturer date. The work must be performed according to federal medical device labeling requirements and is intended for deployment through military supply channels, with performance taking place at the APO location designated by the Department of Defense. This subcontract falls under NAICS code 325992, indicating it involves other miscellaneous chemical product and preparation manufacturing, and is part of the Medical Supply Chain’s Medical Surgical Financial Services initiative. Bids must be submitted by August 10, 2026, and the opportunity was posted on August 2, 2026, with all relevant details accessible through the DIBBS RFQ platform.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Aviation Fuel Icing Inhibitor ChemicalThe contract covers the manufacture or supply of 44,000 units of aviation fuel icing inhibitor identified by NSN 6850010576427, ensuring full compliance with applicable military specifications for performance and quality. The product is destined for delivery to Qatar under a subcontract awarded by the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 325992 indicating the industrial category for other chemical product and preparation manufacturing. The solicitation was posted on August 2, 2026, and the place of performance is not specified, but the end-use location is clearly Qatar, underscoring the international nature of the supply requirement. The contract is linked to a DIBBS award record, confirming its formal issuance and tracking under the U.S. military logistics system, with no set-aside provisions identified, indicating it is open to any qualified supplier.

Defense Logistics Agency

POSTED

DEADLINE

Medical Packaging and Labeling ServicesThe contract requires the packaging and labeling of tourniquets in sealed units that meet strict compliance standards including MMS No. 1, ASTM D3951, and DLA RP001, ensuring suitability for military medical supply chain deployment. Each unit must be properly barcoded for tracking and include hazardous material labeling as required by applicable regulations, with all processes designed to maintain integrity and traceability throughout storage and distribution. The work must be performed to support the Department of Defense’s Medical Supply Chain, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance centered at Fort Lewis, Washington, ZIP 98433-9500. Subcontractors must respond by the deadline of August 10, 2026, and the solicitation falls under NAICS code 325992 for other pharmaceutical and medicinal product manufacturing. All packaging procedures must align with military logistics and safety protocols without exception.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Pharmaceutical Packaging & Shelf-Life ComplianceThe contract requires the provision of pharmaceutical packaging in sealed unit containers that fully comply with MIL-STD-2073-1E standards to ensure product integrity, environmental protection, and extended shelf-life of 36 months under controlled storage conditions of 25°C. The packaging must maintain the stability and safety of the pharmaceutical products throughout storage and distribution, meeting all military specifications for preservation, labeling, and environmental resistance. Compliance with these rigorous standards is mandatory to support reliable logistics and operational readiness. The solicitation is categorized as a subcontract under NAICS code 325992 and is issued by the Department of Defense through the Medical Supply Chain Pharm FSA. Interested parties must submit responses by the deadline of August 10, 2026, with the opportunity posted on August 2, 2026. The work is tied to a specific government logistics and supply chain function, and successful bidders will be expected to deliver packaging solutions that guarantee long-term performance under defined environmental parameters without reliance on additional protective measures. All deliverables must be traceable, consistent, and fully aligned with defense-grade packaging protocols.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Pharmaceutical Labeling & Medical Marking ComplianceThe contract requires precise compliance with Medical Marking Standard No. 1 for the labeling and marking of pharmaceutical packaging, ensuring all content, format, and durability meet stringent standards set by the Defense Logistics Agency and the Food and Drug Administration. The work involves applying permanent, legible, and tamper-resistant markings that adhere to regulatory specifications for identification, traceability, and safety throughout the supply chain, with attention to material resilience under varied environmental conditions. All labeling must be accurate, fully compliant, and consistently applied across all packaged pharmaceutical items intended for military and government use. The contract is classified as a subcontract under NAICS code 325992 and is issued by the Department of Defense through the Medical Supply Chain Pharm FSA. It was posted on August 2, 2026, with a firm response deadline of August 10, 2026. The place of performance and point of contact details are not specified, but performance is expected to support federal healthcare and logistics operations under DLA oversight. The procurement is open to qualified subcontractors capable of delivering fully auditable, compliant labeling solutions without deviation from established standards, and all submissions must align with the requirements enumerated in the DIBBS solicitation portal.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract specifies the packaging, labeling, and barcode serialization of gutta-percha points to meet stringent military and medical standards, including DLA requirements, MIL-STD-129, and Medical Marking Standard No. 1. The work involves ensuring every unit is properly identified with accurate serial data, compliant labeling, and secure packaging to support traceability and inventory control within the Department of Defense supply chain. All processes must align with federal specifications for medical device marking and logistics documentation. This is a subcontract opportunity under NAICS code 325992, issued by the Department of Defense through the Medical Supply Chain FSH. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026. While no specific place of performance or point of contact is listed, the work is intended to support defense medical logistics and requires full compliance with DoD serialization and labeling protocols. Interested parties must access the official solicitation via the DIBBS portal at the provided URL to review full technical and administrative requirements.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of ESD/EMI protective bags and wraps that meet MIL-PRF-81705 Type I and Type III specifications, requiring all materials to be sourced exclusively from manufacturers listed on the QPL-81705 qualified product list. The items must provide reliable electrostatic discharge and electromagnetic interference protection for sensitive electronic components, adhering strictly to military performance standards for durability, conductivity, and shielding effectiveness. All deliveries must be traceable to qualified vendors and comply with documented quality control requirements to ensure consistent protection in defense and aerospace applications. The procurement is issued as a subcontract under the Department of Defense’s Active Devices Division, with performance localized to Columbus, Ohio, and a final delivery deadline set for August 13, 2026. The NAICS code 325992 identifies the industry as Other Chemical Product and Preparation Manufacturing, indicating specialized formulation and production processes are involved. The solicitation is active as of August 2, 2026, and interested parties must submit responses before the stated deadline to be considered. While no set-aside designation is specified, the requirement is directed toward qualified suppliers capable of manufacturing to exacting defense specifications.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

TEST STRIPS, SANITIZING

Solicitation # SPE2DS-26-T-301P

Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.

Family Planning Centers

POSTED

about 14 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-302E

The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-301U

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-300Q

An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-301F

The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

CHIP, HYDROGEN PEROX

Solicitation # SPE2DS-26-T-300S

The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 14 hours ago

DEADLINE

CHIP, CARBON DIOXIDE

Solicitation # SPE2DS-26-T-301A

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

Family Planning Centers

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-300U

The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

NEEDLE SET, INTRAOSS

Solicitation # SPE2DS-26-T-301Q

The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

GLOVES, CHEMICAL AND

Solicitation # SPE2DS-26-T-300Z

The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 14 hours ago

DEADLINE

TUBING, ANESTHESIA

Solicitation # SPE2DS-26-T-301G

The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-302G

The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.

Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE