Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Medical Storage and Shelving Supplier

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Medical Storage and Shelving Supplier to support prime contractors on Navy Navfacsyscom Southeast facility projects located in Crestview. The scope of work involves the supply and installation of heavy-duty vertical shelving and storage systems specifically designed for medical records and supplies. All provided equipment, including medical supply cabinets, must be industrial-grade and meet established commercial safety ratings. The project falls under NAICS code 337215 and is managed under the Department of Defense. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline set for November 16, 2026. The primary objective is the delivery of fully installed vertical storage solutions that meet the rigorous demands of military medical facilities.

General Info

NAICS

337215 - Showcase, Partition, Shelving, and Locker Manufacturing

Place of Performance

Crestview, FL, USA

Set-Aside

NONE

Documents

This scope was carved out of N69450-27-RP-00023.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Solicitation for Offers - Office/Medical Space Approximately 12,000 Rentable Square Feet (RSF) in Crestview, FL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Southeast
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies and installs vertical storage and shelving systems for prime contractors on Navy Navfacsyscom Southeast facility projects. Provides heavy-duty vertical shelving and storage systems designed for medical records and supplies. Uses industrial-grade vertical shelving and medical supply cabinets meeting commercial safety ratings. Delivers installed vertical storage and shelving systems.

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
SLED
IWQ137959 Purchase of a Clock Exhibit Case for the Gwinnett Historic Courthouse
Solicitation # IWQ 137959
Gwinnett County Government is soliciting quotes for the purchase and delivery of one freestanding, archival-quality exhibit case to display clock movement and motion works at the Gwinnett Historic Courthouse in Lawrenceville, Georgia. The case must feature a UV-filtering acrylic vitrine with an airtight seal, a flat archival-quality linen board deck, and a natural wood veneer exterior base with a color approved by the County. All interior materials must be acid-free, inert, and non-off-gassing. The minimum interior vitrine dimensions are 64 inches high, 55 inches wide, and 32 inches deep. The vendor is responsible for delivery and placement of the case in a pre-designated space, with delivery coordinated through the Department of Community Services. The award will be granted to the lowest responsive and responsible vendor, with evaluation factors including quality, conformity to specifications, suitability, and delivery terms. Required submission documents include a lump sum quote schedule, a certification of non-collusion, and at least three references for similar work. Depending on the contract value and provider status, a contractor affidavit, ethics affidavit, or specific bonds may be required. Payment will be processed electronically via ePayables or direct deposit following the verification of delivery. A mock-up must be approved by the County before the award is finalized or production begins.
Gwinnett County Government

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
DIBBS
RACK, STORAGE, SMALL ARM
Solicitation # SPE7L7-27-T-0181
Solicitation SPE7L7-27-T-0181 is a fixed-price procurement issued by the Department of Defense, specifically through DLA Weapons Support, for the supply of two small arms storage racks. The required items are identified by NSN 1095-01-612-1947 and MTM Business Systems part number CWR13. Delivery is set for 164 days after the order, with an original required delivery date of February 2, 2027, and a need ship date of April 6, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. It also incorporates specific requirements for demilitarization of small arms parts and the removal of government identification from non-accepted supplies. Compliance with the Buy American Act and the Berry Amendment is required for all quotes above the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and reporting, and the contract incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navfacsyscom Southeast

Same awarding agency

NAICS: 332321
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Accurate Lock & Hardware
Solicitation # N6945027SP7777-Accurate
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply capable of providing a ligature-resistant sliding door system that meets or exceeds the performance of the LR-SDS / SL-LR-SDS manufactured by Accurate Lock and Hardware. This system is specifically required for behavioral health environments to eliminate ligature opportunities and prevent patient barricading through the use of concealed overhead tracks, locking hardware, and operating trim. Technical requirements include a 150 ft-lb impact test rating per ANSI A250.13-2014, dual ball-bearing carrier assemblies with a 1,240 lbs dynamic load capacity, and compliance with ANSI/UL 1784 air leakage testing where applicable. This notice is for market research purposes only and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, including a completed Attachment 1, to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must demonstrate compatibility with the existing system requirements.
Metal Window and Door Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Access Control Equipment panel
Solicitation # N6945027SP7777-AMAG-ACCESS
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply that can provide access control equipment panels with performance equal to specific AMAG Technology models, including the M2150-2DBC, M2150-4DBC, M2150-DBU/MKII, and M2150-8DBC/MKII. The required equipment must fully integrate with the existing AMAG Symmetry Enterprise system, including all software, hardware, databases, and licensing. Technical specifications require the panels to connect via LAN, control up to 16 doors, manage at least 20,000 card holders, support smart card and proximity readers with Wiegand support, and maintain UL 294 and UL 1076 listings with a 100 Mbps network connection. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data and a completed company information form, including their CAGE code, SAM registration status, NAICS code, and bonding capacity. Submissions are limited to five one-sided pages and must be emailed to the designated points of contact, Jeff Rhein and Reuben Amarh, by October 30, 2026, at 3:00 PM ET. The government will evaluate the submissions to determine if alternative products can meet the operational requirements of the existing video surveillance and access control infrastructure.
Security Systems Services (except Locksmiths)

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334512
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Metasys
Solicitation # N69450SP7777-Metasys
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources capable of providing a building automation control system with performance equal to the Johnson Controls Metasys system. Key technical requirements include scalability for seamless connection of field controllers to supervisory servers, open integration supporting industry standards like BACnet, encrypted communications with multi-factor authentication, and a centralized interface dashboard for security risk management. Crucially, the system must provide seamless connectivity to the existing Metasys system currently serving the main hospital in Building 2080. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, a completed company information attachment including CAGE and NAICS codes, and bonding capacity details to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must exclude company brochures. The government is evaluating a wide range of business sizes, including various small business categories and large businesses, to determine if alternative products can meet these specific operational and integration requirements.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Symmetry Enterprise video surveillance system
Solicitation # N6945027SP7777-AMAG
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking potential sources capable of providing a Network Video Recorder and PoE video surveillance cameras, including both indoor/outdoor dome and multisensor models, that offer equal performance to AMAG Technology and AXIS Communications products. A critical requirement is that all hardware and software must fully integrate with the existing AMAG Symmetry Enterprise video surveillance system, including all monitoring stations and licensing. The required Network Video Recorder must feature a Xeon E-2488 Processor, 64 GB of RAM, Windows Server 2019 Standard Embedded OS, and a minimum 5 year warranty. Dome cameras must provide 2 MP color images with IK10 vandal rating and FIPS 140-3 Level 3 security features, while multisensor cameras require 13 MP color images with seamless stitching and FIPS 140-2 Level 2 security. This is a sources-sought notice for market research purposes and not a request for proposals. Interested parties must submit detailed technical data and a completed company information form, including SAM registration and bonding capacity details, to the designated points of contact by October 30, 2026, at 3:00 PM ET.
Security Systems Services (except Locksmiths)

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS