Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Mercury-Compliant Component Handling

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract governs the handling and integration of valves containing mercury-based components, requiring strict adherence to NAVSEA 5100-003D standards to ensure safety and environmental compliance through shockproofing and secondary containment measures. All subcontracted work must be performed in alignment with these technical directives to mitigate risks associated with mercury exposure and mechanical failure under operational stress. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the SBA, with the NAICS code 334511 indicating the involvement of instrument and related manufacturing. Performance is mandated at the DDSP New Cumberland Facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on July 19, 2026, and responses are due by July 30, 2026, with the contract type specified as a subcontract under the Department of Defense’s oversight.

General Info

Small business subcontract for mercury-valve work at New Cumberland, PA, per NAVSEA 5100-003D, due July 30, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

If valve contains mercury-based components, ensure compliance with NAVSEA 5100-003D via shockproofing and secondary containment.

Similar Contracts

Same NAICS industry code

Video Detector Unit SupplyThe contract involves the supply of 37 video detector units identified by NSN 5963016461056 under an indefinite delivery mechanism, with the potential for additional orders up to a total value of $350,000. The award is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 334511, indicating classification within the electromagnetic and other electronic component manufacturing sector. While the solicitation number and specific point of contact are not provided, the contract is accessible through the DIBBS system with the provided link, and the posted date indicates it was made available in July 2026. The place of performance and office address details are not specified, suggesting flexibility in delivery locations or that they will be determined as orders are placed. The indefinite delivery nature allows for phased fulfillment based on operational needs, supporting sustained logistics requirements without requiring separate procurements for each unit.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Antenna Supply (NSN 5985-01-465-9649)The contract entails the supply of a single antenna unit identified by NSN 5985-01-465-9649, to be delivered to a location designated by the government. The prime contractor is authorized to procure this item through a qualified supplier or manufacturer, allowing flexibility in sourcing while ensuring compliance with required specifications. The procurement is managed under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 334511 for electronic component and board manufacturing. The contract is structured as a subcontract with no set-aside designation, and the anticipated posting date is July 20, 2026, indicating a future procurement timeline. Delivery must occur to a government-selected destination, with no specific location provided in the data. The contract reference is tied to award SPE7M125P7514 and accessible via the DIBBS system.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Signal Generator Supply and DeliveryThe contract encompasses the procurement, packaging, and delivery of nine military-compliant signal generators meeting stringent defense standards for functionality, durability, and operational reliability. All units must adhere to full regulatory compliance for hazardous materials handling and defense-specific shipping protocols, ensuring safe transport and integration into secure military systems. The procurement is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, targeting a specific industrial classification associated with electronic component manufacturing. The equipment must be delivered to an unspecified location within the United States, with no public details provided regarding the final destination or point of contact. The solicitation was posted on July 20, 2026, and is identified by the contract number SPE7M1M26V050R. While the exact delivery timeline and payment terms are not disclosed, the requirement for full compliance with defense and hazardous materials regulations underscores the critical nature of the deliverables and the high-level operational environments where these signal generators will be deployed.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Production of STEM, SIGHT ALIGNMENT Components

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Technical Supplies Procurement and FulfillmentThe contract seeks subcontractors to procure, package, label, and deliver technical supplies that meet stringent federal and military standards, particularly MIL-STD-129 for labeling and requirements governing hazardous materials. All goods must be fully compliant with Department of Defense specifications to ensure interoperability, safety, and traceability throughout the supply chain. The work involves end-to-end fulfillment operations including inventory sourcing, quality assurance, secure packaging, accurate labeling, and timely delivery to designated military locations. Issued under the agency name MARITIME SUPPLY CHAIN within the Department of Defense, the contract is classified as a subcontract with a NAICS code of 334511, indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing. The solicitation was posted on July 20, 2026, with a response deadline of August 4, 2026. While no specific place of performance or point of contact is provided, all activities must align with DOD logistics protocols and maintain compliance with federal hazardous materials transportation and handling regulations. Interested parties must submit proposals via the specified DIBBS portal before the deadline to be considered.

MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture of Control Assembly (P/N: 7-44216-5)The contract entails the full-scale manufacturing, assembly, testing, and delivery of 26 units of a Control Assembly identified by part number 7-44216-5 and national stock number 2995-01-129-3917, all in strict accordance with military specifications. The scope of work includes comprehensive configuration control, rigorous inspection protocols, and adherence to established engineering change management procedures to ensure technical integrity and compliance throughout the production lifecycle. All units must meet predefined quality and performance benchmarks aligned with defense requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and falls under NAICS code 334511 for electronic appliance manufacturing. The contract was posted on July 20, 2026, and is part of a broader effort to support military systems through dedicated supply chain execution. Performance execution and delivery are subject to military logistics frameworks, with fulfillment expected to occur in alignment with DLA’s operational standards, though specific geographic delivery locations are not detailed. The work is governed entirely by contractual compliance, quality assurance, and traceability mandates typical for defense industrial base engagements.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Antenna Manufacturing and AssemblyThe contract entails the manufacturing, testing, and quality assurance of 66 units of NSN 5985001060906 antennas in full compliance with military specifications, ensuring each unit meets rigorous performance and durability standards required for defense applications. The work is classified as a subcontract under the NAICS code 334511, indicating the focus on communication equipment manufacturing, and is overseen by the Defense Logistics Agency under the Department of Defense. Performance is expected to adhere to strict quality control protocols throughout production to guarantee operational reliability under demanding conditions. The agreement was posted on July 20, 2026, and is associated with contract number SPE7MX25D0030 and delivery order SPE7MX26F8922, indicating an existing framework agreement with a specific fulfillment requirement. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s electronic systems, reflecting standardized DoD contracting procedures. No set-aside designation is indicated, meaning any qualified vendor may compete for or perform the work, as long as the technical and compliance requirements are fully satisfied.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

TRANSMITTER, LIQUIDThe contract is for the procurement of one liquid transmitter, identified by NSN 6680014150947 and part number XM-36460-59-1500-O-L, sourced from SETRA SYSTEMS, INC. Delivery is required within 20 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must be packaged per ASTM D3951, with additional compliance required to all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging and labeling must strictly follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging guidelines. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Stewart, Georgia. The unit of issue is each, with no variance allowed in quantity. The contract is issued under solicitation SPE4A5-26-T-296C, with a required delivery date of July 7, 2026, and all technical and quality provisions referenced via DLA’s online master list take precedence. Government use codes and shipping identifiers are specified for tracking and logistical purposes.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

VALVE, RESUSCITATORThe valve resuscitator is a barrier system featuring three distinct filtration layers and a one-way duck bill valve, designed to ensure safe and effective resuscitation procedures. It includes top and bottom ports, with adjustable pressure limitations ranging from 5 to 20 cm H2O, and is equipped with a standardized 22mm ID connector compatible with any resuscitation bag flow diverter featuring the same connection. Each unit is individually packaged and must meet strict shelf life requirements: a minimum of 60 months from manufacture, with no more than nine months elapsed between manufacturing and delivery to the government. The product is issued in boxes of 10, with a total order quantity of 20 boxes for delivery within 70 days after award. This item is identified by NSN 6515-01-620-0444 under purchase request 7017560077 and is subject to technical and quality requirements from the DLA Master List, as well as specific packaging and supply handling protocols. The solicitation, issued by the Department of Defense under contract number SPE2DS-26-T-249V, has a response deadline of July 27, 2026, and requires delivery to APO 09227-0000, with primary point of contact Elizabeth Cruz available for inquiries.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

SHEET, SPLINT, ORTHOPThe product is an orthopedic splint sheet made from Aquaplast T material, which is latex-free and designed for temporary or permanent splinting applications. It measures 0.09375 by 18 by 24 inches and becomes clear when heated, allowing for precise shaping and visibility during application. The material features 100 percent memory, enabling repeated reheating and adjustments without loss of integrity, making it suitable for hand, wrist, finger, thumb, elbow, and knee splints using the pinch technique. Each package contains four sheets, and the unit of issue is a package of four. The product is identified by NSN 6515-01-561-0797 and is procured in a single package quantity under purchase request 7017401173. This procurement is governed by technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The contract falls under DLA packaging standards and includes provisions for the removal of government identification from non-accepted supplies. The solicitation, issued under number SPE2DS-26-T-250J, is open for bid with a response deadline of July 27, 2026, and a proposed delivery timeline of 20 days after award. It is managed by the Department of Defense’s Medical Supply Chain, with performance to occur at Fort Knox, Kentucky. Bidders must clearly specify the source and part number being supplied, and all technical compliance is monitored through DLA’s eProcurement system. The primary point of contact is Aidan Martz, reachable via phone and email as provided in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

SFS Drone Detection SystemThe contract seeks a Drone Detection Shield system to provide persistent, centralized detection, identification, classification, and alerting of small unmanned aircraft systems around Columbus Air Force Base in Mississippi, in alignment with DAFMAN 31-101_DAFGM2025-01 paragraph 4.5. The system must support the 14th Flying Training Wing’s daily operations, which include approximately 260 sorties, while enhancing base security and delivering real-time situational awareness to the Base Defense Operations Center. The solution must be designed to allow future integration of a defeat capability without requiring replacement of the core detection infrastructure. The requirement is for a single Lot of the Drone Shield Immediate Response Kit, encompassing all non-personal services, labor, tools, and equipment necessary for deployment as detailed in the Statement of Work. The solicitation, identified as FA302226Q0012, is a total small business set-aside under NAICS code 334511 and was posted on July 20, 2026, with a response deadline of August 5, 2026, at 12 p.m. CST. An amendment to Section 5.0 of the Statement of Work was issued on July 20, 2026, and vendors must submit quotes via email to Contract Specialist A1C Holly Walters and Contracting Officer Nina M. Jones. Performance will occur at Columbus Air Force Base, Mississippi, and the point of contact for inquiries is Holly Walters, with a backup contact provided by Nina Jones.

FA3022 14 Cons Lgca

POSTED

about 14 hours ago

DEADLINE

MDR Control Storage module Receiver (MCSRe)NASA/NSSC is proceeding with a sole source contract award to SAFRAN DEFENSE & SPACE, INC. for the MDR Control Storage module Receiver (MCSRe), as the company is the sole provider of this specific item. The procurement will be conducted under FAR Part 12 as a commercial acquisition, with performance taking place at NASA’s Armstrong Flight Research Center in Edwards, California. The effort is classified under NAICS code 334511, and the solicitation number is 80NSSC26938144Q. Interested parties may submit written capabilities and qualifications to the primary point of contact, Tracy Bremer, no later than 4:00 p.m. Central Standard Time on July 22, 2026, to assist the government in determining whether competition is warranted; however, the decision to proceed without competition remains solely at the government’s discretion. Oral submissions are not accepted, and the NASA FAR Supplement clause 1852.215-84 on the Ombudsman applies, with resources available through the designated procurement ombudsman listing. The solicitation was posted on July 20, 2026, and responses must be submitted via written means by the stated deadline.

NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

MOUNT, RIFLEThe contract solicitation SPE7L7-26-T-4372 is for the procurement of two rifle mounts, a critical gun part with unique requirements and sole-source sourcing under AMSTA525, identified by part number RRS-9000062 and NSN 1005-01-702-7401. The item must be manufactured by a single approved source whose identity must be formally submitted and approved by the Contracting Officer prior to award, with any subsequent changes requiring formal contract modification. Delivery is required FOB origin within 169 days of award, for final delivery to the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, marking must adhere to MIL-STD-129 with no special markings, and palletization must meet DLA standards. Product Verification Testing (PVT) is mandatory prior to acceptance of each shipment, requiring five samples from each subcontractor, with one sample potentially destroyed during testing. The contractor is responsible for ensuring all components meet the technical specifications outlined in the source-controlled drawing and associated technical data packages, with quality assurance inspection conducted by the Quality Assurance Representative at the manufacturer’s facility. The contract enforces stringent cybersecurity compliance under CMMC Level 2 Self-Assessment and DFARS 252.204-7997, requiring adherence to NIST SP 800-171 standards for safeguarding Covered Defense Information, along with mandatory cyber incident reporting per DFARS 252.204-7012. Use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specifications, and substitutes require prior approval. Demilitarization procedures apply per Category I munitions requirements, and government identification markings must not be removed from non-accepted items. Configuration changes must go through formal Engineering Change Proposal procedures, and all measuring and test equipment used in production must be calibrated to national standards. The contract includes clauses on equal opportunity, trafficking in persons, small business representation, subcontracting, and accelerated payments to small business subcontractors, and mandates electronic invoicing exclusively through WAWF. Offerors must hold a valid UEI and CAGE code, declare their size status and socioeconomic certifications, and comply with prohibitions on acquiring covered telecommunications equipment from foreign adversaries. All proposals must be submitted electronically via

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 9 hours ago

DEADLINE

Mercury-Containing Component HandlingThe contract pertains to the safe containment, handling, and disposal of mercury-containing components in accordance with NAVSEA 5100-003D standards, ensuring strict compliance with environmental and safety protocols for hazardous materials. The work is to be performed at the New Cumberland facility with a postal code of 17070-5002 under the oversight of the Department of Defense through the DDSP New Cumberland Facility. This subcontract is classified under NAICS code 562910, indicating specialized waste management services for hazardous substances, and requires full adherence to federal regulations governing mercury handling. Proposals must be submitted by the deadline of July 30, 2026, with the solicitation posted on July 19, 2026, and all activities must align with the technical and procedural requirements outlined in NAVSEA 5100-003D to ensure proper disposal and environmental protection.

Remediation Services

POSTED

DEADLINE

Transportation & Delivery LogisticsThe contract requires the transportation and delivery of packaged goods from the manufacturer to the Defense Logistics Agency Distribution facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. All shipments must comply with specific logistical standards and include complete WAWF documentation to ensure proper receipt and inventory tracking. The NAICS code 484220 indicates this is a ground freight transportation service, and the contract is classified as a subcontract under the Department of Defense. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the performance location is clearly defined as the DLA New Cumberland facility. All vendors must be prepared to meet federal transportation and documentation requirements without deviation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Specialized Packaging & PalletizationThe contract requires specialized packaging, palletization, and marking of delivered items in full compliance with Department of Defense Logistics Agency standards to meet military requirements. All work must adhere strictly to established military guidelines for handling, securing, and labeling goods to ensure compatibility with defense supply chain operations. The scope is focused on ensuring items are properly prepared for transport and storage under the conditions and protocols mandated by U.S. military logistics. The solicitation is issued as a subcontract under NAICS code 561910, with a response deadline of July 30, 2026, and was posted on July 19, 2026. Performance is designated for the New Cumberland area, with a zip code of 17070-5002, under the oversight of the DDSP New Cumberland Facility within the Department of Defense. No set-aside provisions or specific organizational requirements are indicated, and the contract is administered through the DIBBS platform with the reference number SPE7MC26T140V.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for all hazardous materials involved in production or packaging operations at the DDSP NEW CUMBERLAND FACILITY. This subcontract, classified under NAICS code 541620, is managed by the Department of Defense and mandates adherence to federal safety and regulatory standards to ensure proper communication of chemical hazards to workers and handlers. The deliverables must meet current regulatory requirements for accuracy, formatting, and accessibility, and are critical to maintaining compliance and operational safety within the facility. All submissions are due by July 30, 2026, with the solicitation posted on July 19, 2026, and performance expected to occur at the designated location in New Cumberland, Pennsylvania, with ZIP code 17070-5002. While specific point of contact details are not provided, prospective subcontractors must respond through the official DIBBS portal linked in the solicitation. No set-aside provisions are indicated, meaning the opportunity is open to all eligible firms. Failure to deliver compliant documentation could result in disruption of production, regulatory penalties, or contract termination.

Environmental Consulting Services

POSTED

DEADLINE

Precision Valve ManufacturingThe contract calls for the manufacture and delivery of 14 high-precision fluid control valves, each requiring specialized metal coating and finishing processes to meet exacting technical standards. This is a subcontract issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance required at the designated facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The work falls under NAICS code 332912, which pertains to other machine shop work and indicates the need for advanced machining and precision fabrication capabilities. Interested parties must submit responses by the deadline of July 30, 2026, at 5:00 PM, following a solicitation posted on July 19, 2026, with further details accessible via the provided DIBBS link. The contract does not designate a specific set-aside status and does not list a point of contact, suggesting bidders must rely on the public posting for all procedural information.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 19, 2026, with a response deadline of July 30, 2026, and is categorized as a subcontract under the Department of Defense. The place of performance is identified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no city or state details are provided beyond that. The solicitation number is not available, and the NAICS code is listed as NA, indicating no classification was assigned. The organization type and type of set aside are not specified, and no point of contact information is included. The prime contract details could not be retrieved due to system gateway timeouts, which prevents the identification of potential subcontract opportunities. The associated solicitation can be accessed via the DIBBS platform at the provided URL.

POSTED

DEADLINE

Hazardous Materials and Safety Data ComplianceThis contract requires the preparation of Safety Data Sheets (SDS) and full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) for hazardous components used in power supplies, ensuring alignment with the Globally Harmonized System (GHS) for labeling and hazard communication. The work must accurately identify, classify, and document chemical hazards associated with power supply components and implement compliant labels that meet all regulatory requirements for workplace safety and international standards. Performance is expected to include thorough evaluation of material composition, appropriate hazard classification, and clear communication of risks and safety measures through standardized SDS formats and GHS-compliant labeling systems. The contract is a small business set-aside under the SBA program, designated as a Total Small Business Set-Aside, indicating it is reserved exclusively for small business concerns. It falls under NAICS code 541690, which covers other scientific and technical consulting services, reflecting the technical and regulatory advisory nature of the work. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and performance is to be carried out at the DDSP New Cumberland Facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting activity is under the Department of Defense through its DDSP New Cumberland facility, and the work is essential to ensuring regulatory compliance and worker safety for hazardous materials in defense-related power supply systems.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2) SupportThis contract seeks support for achieving Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance, focusing on self-assessment readiness for handling controlled unclassified information. The work includes developing and refining documentation, implementing system hardening measures, and preparing the organization for an official CMMC audit. The contractor must ensure all processes, policies, and technical controls meet the CMMC Level 2 requirements as defined by the Department of Defense for the protection of CUI. Services are expected to align with NIST SP 800-171 standards and include ongoing support throughout the assessment and remediation phases. The contract is a subcontract under a total small business set-aside, with the North American Industry Classification System code 541512 indicating cybersecurity consulting services. Performance will occur at the New Cumberland facility with a zip code of 17070-5002, and proposals are due by July 30, 2026, following a posting date of July 19, 2026.

Computer Systems Design Services

POSTED

DEADLINE

Inspection and Quality Assurance ServicesThe contract entails independent inspection and quality verification services for power supply adapters, requiring compliance with MIL-STD-1916 or ASQ H1331 zero-defect standards, with defects classified as Critical, Major, or Minor to ensure stringent quality control. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, and the services fall under NAICS code 541330, indicating professional, scientific, and technical services in quality control and inspection. The solicitation is structured as a subcontract and is exclusively set aside for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring only eligible small business concerns may submit proposals. Responses must be submitted by the deadline of July 30, 2026, with the solicitation posted on July 19, 2026, and the contracting activity is led by the Department of Defense through the DDSP New Cumberland Facility.

Engineering Services

POSTED

DEADLINE

Specialized Packaging and Palletization ServicesThe contract requires specialized packaging, labeling, and palletization services for power supply adapters in full compliance with military standards including MIL-STD-129, ASTM D3951 Level C, and DLA RP001. These requirements dictate strict protocols for marking, identification, containerization, and pallet configuration to ensure compatibility with Department of Defense logistics and storage systems. All work must be performed to meet exacting defense specifications for durability, traceability, and uniformity across the supply chain. This is a total small business set-aside under the SBA program, with the NAICS code 493190 indicating it falls under Other Warehousing and Storage. The solicitation is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance required at the New Cumberland, Pennsylvania location with zip code 17070-5002. The opportunity was posted on July 19, 2026, and proposals must be submitted by July 30, 2026, with the contract structured as a subcontract. The full details and submission portal are accessible via the provided DIBBS link.

Other Warehousing and Storage

POSTED

DEADLINE

Power Supply Adapter Manufacturing and AssemblyThe contract is for the full manufacturing, testing, and delivery of seven units of a power supply adapter with part number 61091820-000 and NSN 6130-01-616-4165, requiring strict compliance with DLA Master List technical and quality standards. All work must be performed in accordance with defense procurement regulations, ensuring each unit meets rigorous performance, reliability, and documentation requirements. The project is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the place of performance is at New Cumberland, Pennsylvania, with zip code 17070-5002. This effort is managed by the DLA New Cumberland Facility under the Department of Defense, and the procurement is conducted through the DIBBS system. While specific point of contact details are not provided, all prospective vendors must submit proposals through the official DIBBS portal before the deadline to be considered. The contract emphasizes adherence to defense-specific quality controls and supply chain integrity, with no deviation permitted from established technical specifications.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE