Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Bar Manufacturing and Supply

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the fabrication and supply of one metal bar identified by NSN 9510016109320, manufactured strictly in accordance with military specifications and compliant with Defense Logistics Agency technical and quality standards. The item must meet all required performance, dimensional, and material criteria as dictated by DLA to ensure suitability for defense applications. The solicitation is classified as a subcontract under NAICS code 331315, indicating the scope falls within the primary smelting and refining of nonferrous metals. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, and performance is to be delivered to a FPO address with ZIP code 96306-0001. The contracting entity is the Defense Logistics Agency under the Department of Defense, and while no specific point of contact or set-aside details are provided, all proposals must adhere to the technical and compliance requirements outlined by DLA. Subcontractors are expected to fully understand and meet the rigorous quality assurance protocols mandated for defense-related metal components.

General Info

Fabricate and supply one DLA-compliant metal bar per military specs for defense use by August 10, 2026, to FPO 96306-0001.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

FPO, AP, 96306-0001, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and supply of one unit of metal bar (NSN: 9510016109320) per military specifications, compliant with DLA technical and quality standards.

Similar Contracts

Same NAICS industry code

INSERT, SCREW THREAD

Solicitation # SPE4A6-26-T-10EL

The contract pertains to the procurement of 47 units of INSERT, SCREW THREAD with NSN 5325-00-417-4797 under solicitation SPE4A6-26-T-10EL, issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, and delivery must be completed within 20 days after award. This item is sourced under a fully competitive process in accordance with a military or federal specification, and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed; physical identification or bare item marking is required. Covered defense information may apply, and the point of contact for inquiries is Tywanda Maddox Addington at tywanda.maddoxaddington@dla.mil.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ALUM PLATE 4"THK X 10"

Solicitation # SPEFA1-26-Q-0096

Aluminum plate meeting SAE-AMS4108 specification in 7050-T7452 temper, sized at 4 inches thick by 10 inches wide by 22 inches long, is being procured in a quantity of three pieces, each measured in pounds. The contract requires strict adherence to material traceability, mandating certification or certificate of quality with each shipment, and all units must originate from the same heat lot. Each package must include specific object text IDs—RA001, RP001, RS002, RQ017, ZD080, and ZD088—and be packed per ASTM D3951, with packaging and labeling compliant with MIL-STD-129. Palletization must follow DLA packaging requirements for procurement under RP001. The item is subject to a firm fixed price with zero variance allowed in quantity, and inspection and acceptance occur at destination. Delivery is due within two days after award, and shipping must be conducted via the fastest traceable means—parcel post is prohibited. The freight destination is Building 660, Bay 3, Rogers Road, Naval Base Coronado, San Diego, with a separate parcel post address provided for reference. The contract number is SPEFA1-26-Q-0096, the NSN is 9540-LN-003-5651, and the delivery deadline is July 20, 2026. All government use codes and internal identifiers including the RDD, project, and supply chain codes are included for tracking and accountability.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

DEADLINE

in about 10 hours

Aluminum Sheet Manufacturing and SupplyThe contract calls for the manufacture and supply of 23 aluminum sheets conforming to SAE AMS4268, AMS-QQ-A-250/4B, and ASTM B666 specifications, with a T81 temper condition and full certification required for all delivered material. These sheets must meet rigorous aerospace-grade standards for composition, mechanical properties, and surface quality, ensuring compatibility with high-performance applications in defense systems. The requirement is issued as a subcontract under the NAICS code 331315, indicating a focus on aluminum rolling and extrusion operations. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed under the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform at the provided URL. Full documentation and compliance verification must accompany delivery, and the supplier must demonstrate capability to consistently produce material meeting all listed standards with traceable test reports and certification.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Precision Aluminum Sheet Manufacturing & SupplyThe contract calls for the manufacture and supply of 70 units of Alclad 7075-T6 aluminum sheets adhering strictly to military specifications covering thickness, dimensions, and cladding requirements, ensuring the material meets rigorous performance and durability standards for defense applications. All units must be produced to exact tolerances and certified with appropriate documentation to verify compliance with the required metallurgical and surface properties inherent to the 7075-T6 alloy with alclad coating. The solicitation, issued under the NAICS code 331315 for aluminum rolling, is classified as a subcontract and was posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, though no specific point of contact or place of performance details are provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1932

The contract pertains to the procurement of one unit of BAR, METAL with NSN 9510-01-610-9320 under solicitation SPE8E4-26-T-1932, issued by the Defense Logistics Agency. Delivery is required within five days of contract award, FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by more stringent DLA Technical and Quality Requirements, which take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is designated for delivery to a U.S. military address in FPO AP 96306-0001, with a secondary freight shipping address in Japan, and must be shipped as a RDD 999/NMCS shipment under DLAD PROC NOTES C19 and C20. The required delivery date is January 21, 2026, and the contract incorporates all referenced DLA Master List requirements as of the solicitation issuance date. The technical and quality requirements referenced are binding and sourced exclusively from the DLA Master List of Technical and Quality Requirements available online, with CDRL-METALSCERT and DD Form 1423s applicable for certification and data submission. The unit of issue is each (EA), and the total price is $1.00. Government identification must be removed from non-accepted supplies, and the contract is governed by DoD authorized units of issue. The point of contact is Pamela Duffey of DLA, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026. The NAICS code is 331315, indicating classification under primary metal manufacturing, and the contract is classified as federal procurement without set-aside designation.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3719

The contract is for a SEAL KIT, DOOR with NSN 5411015301009 and part number 16505513, supplied by BOH ENVIRONMENTAL, L.L.C., under solicitation SPE8E5-26-T-3719. One kit is required, delivered in a single unit of issue (KT), with fixed quantity and zero variance allowed. Delivery must be completed within five days, FOB origin, and inspection and acceptance occur at the destination. The item has a non-extendable shelf life of 12 months and is classified as a TYPE I (CODE H) item. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container requirements, and packaging code U, with marking conforming to MIL-STD-129 and no special markings required. Palletization adheres to DLA packaging standards. The shipment must be dispatched via traceable means, excluding parcel post, to the designated government facility at Fort Riley, Kansas, with delivery scheduled for July 24, 2026. Technical and quality requirements are governed by the DLA Master List, and Covered Defense Information potentially applies. The contract includes government-specific identifiers and tracking codes for logistics and accountability purposes.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0627

The contract specifies the procurement of 23 sheets of aluminum alloy metal, each 0.125 inches thick, 36 inches wide, and 144 inches long, weighing 64.80 pounds per sheet, with the NSN 9535-00-684-4551. The material must conform to SAE AMS4268 Revision B, SAE AMS-QQ-A-250/4B, and ASTM B666/B666M-20 standards, with a temper designation of T81. All shipments require a Certificate of Quality Compliance, including mill certification, with a copy provided to the DLA Troop Support Contracting Officer with every delivery. Each sheet must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and exact dimensions using stamping or stenciling that is legible, waterproof, and noncontaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes. Sheets must be supplied in whole foot lengths only. Packaging must comply with ASTM B660-23 Level A and MIL-STD-2073-1E, including robust four-corner and full-edge protection, fiberboard or better top and bottom coverage, and adherence to PREP FOR DELIVERY code ZZ. Markings must also include both units of measure when applicable and conform to MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from the QSLD requirement constitutes an exception that must be clearly stated. Products not sourced through an approved QSLD distributor are considered unauthorized substitutions and may result in criminal penalties. Compliance with the QSL program waives the need for government inspection, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements. The contract mandates firm fixed pricing with no tolerance for quantity variance, delivery within 90 days after order date, and destination point inspection and acceptance. The material will be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, with packaging and transport governed by DLA-specific procedures. The solicitation was issued under SPE8E9-26-Q-0627 with a response deadline

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0630

The contract specifies the procurement of aluminum metal sheets with precise technical and quality requirements, including material specifications of Alclad 7075-T6 with 0.0016 inch cladding on both sides, 0.040 inch thickness, 36 inch width, and 144 inch length, weighing approximately 20.95 pounds per sheet. All sheets must conform exactly to the stated dimensions with no tolerance for test coupons, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full fiberboard coverage top and bottom, and marking in accordance with MIL-STD-129, with dual-unit quantity labeling where applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Non-compliance with QSLD rules constitutes an unauthorized substitution and may trigger criminal penalties. This solicitation waives government inspection requirements for approved QSLD suppliers, relying instead on mill certifications and compliance with referenced standards including SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23. Material must be delivered within 55 days of award, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at destination, with FOB origin terms. Two separate line items total 70 sheets, destined for Tinker AFB, OK and San Diego, CA, with a required ship date of July 9, 2026. All documentation, including Certificates of Quality Compliance and marking details, must align strictly with the referenced Technical Data Package and DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3724

The contract pertains to the procurement of a SEAL KIT, DOOR with NSN 5411-01-530-0999, requiring the delivery of one kit under Purchase Request 7017622979. The item is classified as a TYPE I (CODE H) shelf-life item with a non-extendable shelf life of 12 months, and it is subject to DLA packaging and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements. Delivery must be completed within five days of contract award, FOB destination, with no variance allowed in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific marking instructions, no special marking, and palletization adhering to DLA standards. The item is not hazardous, and shipment must be made via traceable means excluding parcel post, destined for Fort Riley, Kansas. The contract is part of solicitation SPE8E5-26-T-3724, with a response deadline of August 10, 2026, and the required delivery date is July 24, 2026. The primary point of contact is Don Trachtman of the Defense Logistics Agency, and the acquisition falls under NAICS code 331315.

Defense Logistics Agency

POSTED

DEADLINE

Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE)The contract requires the manufacture and delivery of 312 linear feet of aluminum sheeting conforming to AMS-QQ-A-250/4 specification, grade 2024-T3-BARE, with a thickness of 0.032 inches, width of 48 inches, and length of 12 feet per piece. All material must originate from a single heat lot to ensure uniform chemical and mechanical properties, with full traceability documentation provided for every batch. Comprehensive certification, including material test reports and heat lot identification, must accompany the shipment to confirm compliance with military specifications. The materials are intended for use in defense applications requiring high strength and durability, and strict adherence to the specified alloy and temper is mandatory. The solicitation, titled Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE), is issued as a subcontract under the Department of Defense through DLA Fleet Readiness Southwest, with the NAICS code 331315 indicating fabrication of rolled metal shapes. The response deadline is August 3, 2026, and all submissions must be completed by that date. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal. No set-aside provisions apply, and the contract is open to qualified suppliers capable of meeting exacting aerospace-grade material standards with full documentation and lot traceability.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

ALUM SH 2024-T3-BARE-.

Solicitation # SPEFA1-26-Q-0095

The contract specifies the procurement of 312 linear feet of aluminum sheeting compliant with AMS-QQ-A-250/4 (2024-T3-BARE), measuring 0.032 inches in thickness, 48 inches in width, and 12 feet in length, with PVC coating on both sides. All material must originate from the same heat lot and include required certifications upon delivery. The item is to be packaged per ASTM D3951, marked and labeled according to MIL-STD-129, and palletized in accordance with RP001 DLA packaging requirements. The unit of issue is linear feet, with no variance allowed in quantity—exactly 312 feet must be delivered. The pricing is firm fixed, with inspection and acceptance occurring at the destination. Delivery is required within seven calendar days after award, and the shipment must be sent to the designated DLA receiving facility at Naval Base Coronado in San Diego, California. The government-provided delivery target date is September 23, 2026, under solicitation SPEFA1-26-Q-0095, with the purchaser identified as DLA Fleet Readiness Southwest. All technical and quality standards mandated by the DLA Master List supersede any conflicting ASTM requirements.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3690

The contract specifies the procurement of a SEAL KIT, DOOR with NSN 5411015301005, supplied as a single kit per unit of issue (KT), with a total quantity of three units required under separate CLINs. The item is classified as a TYPE I (CODE H) with a strict 12-month non-extendable shelf life, and the manufacturer’s date must be provided. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and containment standards, while marking follows MIL-STD-129 with no special codes. Palletization adheres to DLA’s procurement requirements, and shipment must be delivered FOB origin within five days via traceable freight methods, excluding parcel post, to the designated military address at Fort Riley, Kansas. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The item is covered under defense information protocols and incorporates technical and quality standards referenced from the DLA Master List. The required delivery date is July 24, 2026, and the contract is issued under solicitation SPE8E5-26-T-3690 by the Defense Logistics Agency for the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

RISER, TUBE, LAVATORY

Solicitation # SPE8E8-26-T-4922

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-159F

The contract specifies the procurement of a single seat valve with NSN 4820-01-702-5098 under solicitation SPE7MC-26-T-159F, with a delivery requirement of 20 days after award. All supplies must comply with DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly permitted by the specification. Mercury or mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents designated by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as defined by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, and disclosure to foreign persons, including foreign nationals employed by U.S. firms, is restricted without prior government authorization. Only DLA contractors with approved US/Canada Joint Certification Program status, completion of required export control training, and formal DLA approval are permitted to access controlled technical data. The place of performance is Mechanicsburg, Pennsylvania, and inquiries should be directed to Paula McClary at the designated DLA contact information.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

FLOODLIGHT, ELECTRIC

Solicitation # SPE8E7-26-T-3440

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Azithromycin Tablets Solicitation

Solicitation # SPE2D2-26-R-0008

The solicitation SPE2D2-26-R-0008 for Azithromycin Tablets is a Lowest Price Technically Acceptable (LPTA) acquisition issued by the Defense Logistics Agency under the Department of Defense, targeting pharmaceutical suppliers to provide specified tablet formulations in unit-of-use packaging meeting stringent regulatory and technical standards. The contract encompasses five clinical line items for 250mg, 500mg, and 600mg azithromycin tablets in 6-count, 3-count, and 30-count bottles, with base quantities for each and four one-year option periods allowing for a potential five-year contract duration. Technical acceptability is strictly gated by compliance with current Good Manufacturing Practices, FDA licensing through an approved NDA, ANDA, or BLA, therapeutic equivalence “A” ratings, adherence to the Drug Supply Chain Security Act, and full disclosure of manufacturing facility locations and foreign ownership status. The packaging must be child-proof, cylindrical with minimum dimensional specifications, free of glass, and compatible with automated dispensing systems like Baxter ATC and OptiFill, while requiring GS1-128 or HIBCC barcode labeling at the unit level with NDC, lot number, and expiration date encoded to ANSI/ISO/IEC quality grade C or higher, avoiding barcode placement across perforations or in proximate pairs. Offerors must submit electronic proposals via the DIBBS portal in two volumes—one technical compliance package and one price proposal—with no page limits, but failure to address mandatory representations under FAR 52.204-19, DFARS 252.204-7018, and other referenced clauses results in disqualification. Past performance and technical compliance are evaluated as pass/fail gates before price is considered as the sole award criterion. Delivery is FOB destination to DLA and VA Prime Vendor distribution centers, with performance commencing 45 days after award and pricing effective 15 days after that. Contract payments are routed through Prime Vendor contractors, not directly by the government, and rights to payment cannot be assigned. The closing date has been amended to August 12, 2026, at 3:00 PM EDT, with proposals requiring valid UEI and CAGE codes and certification of small business or other socioeconomic status if applicable. The procurement excludes covered telecommunications equipment and requires full disclosure of country of origin for both active pharmaceutical ingredients and final products, with no tolerance for uncorrected FDA violations

Pharmaceutical Preparation Manufacturing

POSTED

about 19 hours ago

DEADLINE

DSCR B150 ARNG Boiler Replacement

Solicitation # SP4703-26-Q-0061

The Defense Supply Center Richmond (DSCR) is soliciting a firm-fixed price contract for the replacement of the B150 ARNG boiler under solicitation SP4703-26-Q-0061, set aside entirely for small businesses with a size standard of $19 million under NAICS code 238220. The project has an estimated magnitude between $250,000 and $500,000 and requires performance at DSCR in Richmond, Virginia, with a 270-day period of performance beginning from the Notice to Proceed. The prime contractor must maintain a legitimate, publicly visible office within a 120-mile radius of DSCR that is registered and active on SAM.gov; subcontractor locations are not acceptable, and the prime must substantiate its office through documentation such as a lease agreement or proof of business mail delivery. The office must be established and verified in SAM.gov by the solicitation closing date; newly registered offices submitted before the deadline are acceptable. Proposals must be technically acceptable, meeting all mandatory requirements including SAM registration, location validation, and submission of required documentation such as a project narrative, list of definable work features, projected timeline, and at least five relevant past projects completed within the last five years. Past performance will be evaluated using CPARS and SPRS data. Award will go to the lowest-priced, technically acceptable offeror. The contractor must comply with all applicable regulations including OSHA 29 CFR 1926, USACE EM 385-1-1, the Buy American Act, the Hazard Communication Standard, and MIL-STD-129 for packaging and labeling. Hazardous materials must be labeled appropriately, and radioactive materials must meet specific activity thresholds per MIL-STD-129. Liquidated damages of $500 per calendar day will apply for delays in completion, and final acceptance requires successful punch-out, pre-final, and final inspections along with training of Government personnel. Payment requests must be submitted electronically through WAWF, with no hard copies accepted, and payments exceeding 80% of the contract value are contingent upon final inspection approval. All contractor personnel must complete DBIDS pre-enrollment at least five days before the site visit on July 30, 2026, and must pass military installation screening to gain access. The contractor must also comply with DFARS and FAR clauses related to antiterrorism training, whistleblower protections, subcontractor reporting

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 19 hours ago

DEADLINE

Subcontracting Plan Development & ReportingThe contract involves the development and ongoing maintenance of a compliant subcontracting plan tailored to meet Department of Defense requirements, with a focus on ensuring meaningful participation from small businesses throughout the supply chain. It requires systematic tracking, documentation, and reporting of small business subcontracting activities to uphold federal compliance standards for defense prime contractors, including adherence to applicable regulations and performance metrics established by the Defense Logistics Agency. The work is tied to the NAICS code 541611, indicating a focus on management consulting services that support subcontracting strategy and regulatory alignment. The effort demands continuous monitoring of subcontractor performance and accurate reporting to federal systems, ensuring transparency and accountability in small business utilization. While no specific geographic place of performance is listed, the contract is administered under the Department of Defense and centered on fulfilling obligations to the Defense Logistics Agency. The contract is classified as a subcontracting action with no set-aside designation, and compliance with evolving federal guidelines will be critical to successful execution throughout the contract period.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Labeling & RFID Tagging ServicesThe contract encompasses military-compliant packaging, labeling, and passive RFID tagging services specifically for repair parts, ensuring full adherence to Department of Defense standards. It includes case-level and pallet-level tagging to support end-to-end logistics visibility and inventory management across the defense supply chain. All activities must meet strict DoD requirements for durability, readability, and interoperability of tags and labels in operational environments. The work is procured under a subcontract by the Defense Logistics Agency, operating under the NAICS code 561990 for other support services. The contract is tied to the primary award SPE4AX21D9000 with delivery order SPE4AX23F5788, and performance is intended to support defense logistics operations without geographic restriction. The solicitation was posted in July 2026 and is part of a broader effort to modernize and standardize asset tracking through RFID technology in military repair and maintenance logistics.

All Other Support Services

POSTED

DEADLINE

Aircraft Windshield Panel SupplyThe contract pertains to the supply of aerospace-grade laminated windshield panels specifically designed for military aircraft, requiring strict compliance with defense-grade specifications. Each panel must be packaged and labeled according to military standards, include RFID tagging for real-time tracking, and support full traceability throughout the supply chain from manufacture to delivery. These requirements ensure operational readiness, inventory control, and security across military logistics networks. The work is being executed under a subcontract tied to the Department of Defense through the Defense Logistics Agency, with the NAICS code 336413 indicating manufacturing of aircraft parts and accessories. Although specific delivery locations or points of contact are not provided, the contract is actively active with a posted date of July 29, 2026, and is administered under a defined procurement identifier linked to ongoing defense support operations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Oxygen System Clamp Assembly SupplyThe contract involves the manufacture and supply of precision metal clamp assemblies specifically designed for aircraft oxygen systems, requiring stringent quality controls and full traceability throughout production and delivery. Each component must be produced to exacting military standards, including proper packaging, labeling, and the integration of RFID tagging for real-time inventory and logistics tracking. The work supports critical aviation life-support infrastructure and demands adherence to defense-grade specifications to ensure operational reliability and safety in high-stakes environments. This is a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 332994 covering other fabricated metal product manufacturing. The contract was posted on July 29, 2026, and performance is tied to the broader defense supply chain, though no specific place of performance is identified. All deliverables must meet rigorous documentation and identification protocols to support accountability across the military logistics network, with the award linked to a DLA procurement system using the referenced contract and delivery identifiers.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Supply of Toggle Switch (NSN 5930015437946)The contract requires the supply and delivery of a single military-specification toggle switch identified by NSN 5930015437946 and part number 1927625, manufactured by CAGE code 11083, to Fort Leonard Wood, Missouri. The item must fully comply with Defense Federal Acquisition Regulation Supplement and Defense Priorities and Allocations System requirements to ensure alignment with defense procurement standards. The contract is structured as a subcontract under the broader procurement authority of the Defense Logistics Agency, operating within the Department of Defense. The North American Industry Classification System code 423690 applies, indicating classification under miscellaneous nondurable goods merchant wholesalers. Delivery is expected to meet all applicable military specifications and contractual timelines, though specific deadlines and delivery schedules are not detailed in the provided information. The contract remains active under the referenced DIBBS award record, with performance tied to the specified location and regulatory frameworks governing defense supply chains.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Ammonia Chip Manufacturing and SupplyThe contract pertains to the manufacture and supply of high-purity ammonia chips identified by part number 6406020 and national stock number 6550-01-530-9390, specifically requiring compliance with military quality standards. The work is classified as a subcontract under NAICS code 325120, which corresponds to the chemical manufacturing sector, and is being procured by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, indicating a narrow window for potential vendors to submit proposals. Although the location of performance and point of contact are unspecified, the procurement is part of a broader effort to secure critical chemical components for defense applications. The contract is open for competitive bidding through the DIBBS platform, and suppliers must demonstrate the ability to meet stringent military specifications for purity, consistency, and reliability of the ammonia chips.

Industrial Gas Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Supplier Reporting (DFARS 252.204-7012)This contract requires the implementation of NIST SP 800-171 security controls to safeguard covered defense information within the supply chain, ensuring compliance with Department of Defense cybersecurity requirements under DFARS 252.204-7012. The contractor must establish and maintain a robust cybersecurity framework that aligns with the specified NIST standards to protect sensitive unclassified information transmitted, stored, or processed as part of DoD contract performance. All systems handling such information must be configured to meet the full suite of controls, including access management, system and communications protection, audit and accountability, and incident response capabilities. In addition to implementing the required security controls, the contractor is obligated to support timely and accurate cyber incident reporting for any breaches or anomalies affecting covered defense information. This includes notifying the appropriate DoD authorities within the mandated timeframes and providing detailed documentation of the incident, the response undertaken, and any impact to data integrity or confidentiality. The solicitation is issued as a subcontract under the Defense Logistics Agency, with a response deadline of August 4, 2026, and falls under NAICS code 541512 for computer systems design services, indicating a focus on technical cybersecurity implementation rather than general procurement. Compliance is mandatory for contract eligibility and ongoing performance.

Computer Systems Design Services

POSTED

DEADLINE