Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Fabrication and Heat Treatment Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified subcontractors to provide heat treatment, forging, and non-destructive testing services for metal components, ensuring compliance with stringent military specifications for performance and durability. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with delivery schedules and quality controls aligned to Department of Defense standards. The North American Industry Classification System code 332813 confirms the focus on forgings and stampings, requiring specialized equipment and certified personnel experienced in military-grade metal fabrication processes. Bidders must submit proposals by August 10, 2026, with no set-aside provisions identified, indicating open competition among eligible subcontractors. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, emphasizing the critical nature of these components in defense systems. Technical compliance, traceability of materials, and adherence to non-destructive testing protocols are essential for award consideration, and all work must meet exacting quality assurance requirements without deviation.

General Info

Subcontractors needed for military-grade heat treatment, forging, and testing in New Cumberland, Pennsylvania, by August 10, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Heat treatment, forging, and non-destructive testing of metal components to meet military performance and durability standards.

Similar Contracts

Same NAICS industry code

Hot-Dip Galvanizing of Metal ComponentsThe contract requires the hot-dip galvanizing of structural metal components to achieve a minimum zinc coating thickness of 120 microns, fully compliant with UNI EN ISO 1461 standards to ensure robust corrosion resistance in harsh marine environments. The work must be performed to meet the durability and protective requirements necessary for exposure to saltwater and coastal weather conditions, ensuring long-term structural integrity and reduced maintenance needs. All materials and processes must be rigorously controlled to maintain coating uniformity, adhesion, and surface quality as specified by the international standard. The contract, titled Hot-Dip Galvanizing of Metal Components, is classified as a subcontract under NAICS code 332813 and is solicited by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense. The response deadline is August 17, 2026, and all work must be performed in Gaeta. The solicitation was posted on July 29, 2026, and is accessible through the SAM.gov portal. No set-aside provisions are indicated, and the place of performance is fixed, requiring contractors to plan logistics and execution accordingly to meet the stringent technical and temporal requirements.

Navsup Flc Sigonella Naples Office

POSTED

about 17 hours ago

DEADLINE

Precision Metallic Tube Manufacturing & DeliveryThe contract calls for the manufacture and delivery of twelve precision metallic tubes designated as critical application items, requiring strict adherence to military technical data packages TDP Rev A Gen 1 and specific engineering drawings such as NR 53711 6690372. These components must meet exacting dimensional, material, and performance standards to ensure operational reliability in defense systems, with all work needing to conform to established military specifications without deviation. The subcontract is issued under NAICS code 332813, indicating classification within the forging and stamping industry, and places performance at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, leaving a limited window for qualification, proposal submission, and compliance verification. The contract is managed by the Fluid Handling Division of the Department of Defense and is accessible via a designated DIBBS platform link for vendor participation. While no set aside designation or point of contact information is provided, the nature of the items and the involvement of a DoD component signal that only qualified suppliers with verified capabilities in precision metal fabrication and defense supply chain experience are expected to respond. Failure to meet the technical requirements or delivery timelines will likely result in disqualification or contract termination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machining and Metal FabricationThe contract calls for precision CNC machining of valve bodies, spools, and internal components from specified high-performance alloys, with full lifecycle support including finishing, deburring, and rigorous dimensional inspection to meet strict aerospace and defense specifications. All work must adhere to exacting quality standards, ensuring tight tolerances and surface finishes suitable for critical fluid control systems within military applications. The scope emphasizes reliability and repeatability, requiring validated processes and documented quality controls throughout production. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 332813, which covers machine shops and precision manufacturing services. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO location bearing zip code 09587. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026, providing interested small business contractors with a limited window to submit proposals for this high-priority subcontract opportunity.

Defense Logistics Agency

POSTED

DEADLINE

Surface Treatment & Coating (Phosphate Coating)The contract requires the application of a phosphate coating to bolt assemblies in strict adherence to the military specification MIL-DTL-16232H, with the primary objectives of enhancing corrosion resistance and improving adhesion for subsequent coatings or finishes. Process control measures must be rigorously implemented to ensure consistent quality, and full traceability of each coated assembly is mandatory to meet defense-grade standards for accountability and performance verification. The work is classified as a small business set-aside under the SBA, exclusively available to businesses certified as small under the NAICS code 332813, which corresponds to other fabricated metal product manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026, with the procurement managed by the Department of Defense’s Land Supply Chain through a subcontracting arrangement. All work is to be performed in accordance with federal acquisition regulations, though specific performance location details are not provided.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Surface Preparation and Coating ApplicationThis contract requires the cleaning, pretreatment, and application of an e-coat primer followed by a military-compliant topcoat to mounting brackets, ensuring full adherence to defense sector surface finishing standards. The work must be performed in compliance with military specifications for durability, corrosion resistance, and finish quality, with all processes tailored to meet the strict technical and environmental requirements of defense-grade coatings. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to bid, promoting small business participation in defense-related procurement. The solicitation, issued by the Strategic Acq Program Directorate within the Department of Defense, was posted on July 28, 2026, with responses due by August 12, 2026. It falls under NAICS code 332813, which categorizes metal coating, engraving, and related activities. The place of performance and specific location details are not specified, indicating flexibility in where the work may be carried out, as long as all contract requirements are met. Bidders must ensure capability to deliver finished brackets meeting military compliance standards within the given timeline, and all work must align with the technical and regulatory expectations of the Department of Defense procurement system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturing of Plain Chrome Copper Shoe AssemblyThe contract calls for the manufacture of a military-spec chrome copper shoe assembly compliant with NSN 3110012249738, requiring precision machining, surface plating, and rigorous quality control processes to meet strict defense standards. The work must be performed to ensure full functional and dimensional conformity under operational military conditions, with all phases of production subject to inspection and certification protocols. The solicitation is issued as a subcontract under the NAICS code 332813 for other fabricated metal product manufacturing, with the place of performance located in Bremerton, Washington, 98314-6001. The opportunity was posted on July 28, 2026, and responses are due by August 5, 2026, with the ordering activity being the ASC Commodities Division under the Department of Defense. All work must align with the technical and procedural expectations defined by the military specification for this part.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Blue Anodizing and Surface FinishingThe contract calls for the surface treatment of aluminum spacer sleeves with a blue anodized finish, adhering to implied military or aerospace standards such as MIL-A-8625 to guarantee robustness, corrosion resistance, and uniform coloration. The work must meet precise quality benchmarks expected in defense and aviation applications, ensuring the finish withstands environmental stressors while maintaining aesthetic and functional integrity. All processing must comply with industry-recognized specifications governing anodizing thickness, dye consistency, and sealing integrity. The solicitation is structured as a subcontract under NAICS code 332813 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Proposals are due by August 5, 2026, with the contract performance location situated in Tracy, California, zip code 95304-5000. The posting date is July 28, 2026, indicating a lead time of approximately one week for vendor responses. The work requires precise execution to satisfy stringent military-grade requirements, and participation is open to qualified subcontractors capable of delivering certified anodized components meeting the specified durability and color standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Special Processes and Coatings for Aircraft ComponentsThe contract involves executing specialized manufacturing processes such as heat treatment, welding, non-destructive testing, and surface finishing including anodizing and plating on structural panel components for aerospace applications. These processes are critical to ensuring the structural integrity, durability, and compliance of aircraft parts with stringent military and aviation standards. Work under this subcontract must be performed at Tinker Air Force Base, Oklahoma, with a response deadline of August 5, 2026, and is classified under NAICS code 332813 for metal coating, engraving, and allied services. The contracting activity is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating this is part of a broader defense supply chain effort to support aircraft maintenance and production. The solicitation is open to qualified subcontractors capable of meeting exacting quality control and process validation requirements for defense-critical components.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-3705

This contract is for the procurement of CLEANING SOLVENT, GE, under solicitation SPE8E5-26-T-3705, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item, identified by NSN 7930-01-367-1000, requires a quantity of 10 boxes with delivery expected within 20 days after award. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contract is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA questionnaire, are permitted access to the technical data. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, and the contract includes provisions for handling Covered Defense Information. The place of performance is Kings Bay, GA, with Devin Duffy as the primary point of contact.

Defense Logistics Agency

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-3717

The contract is for the procurement of Cleaning Solvent, GE, identified by NSN 7930-01-367-0995, under solicitation SPE8E5-26-T-3717, issued by the Defense Logistics Agency. Two separate line items are specified: one for 1 box delivered to Fort Benning, GA, and another for 2 boxes delivered to Cherry Point, NC, both with a required delivery window of five days. The solvent is classified as a Type I (Code H) item with a non-extendable 12-month shelf life and must meet the technical standards of SAE AMS3167 Revision NR B dated October 1, 2005. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is regulated as a hazardous material, subject to IP025 shipping protocols, and parcel post is strictly prohibited; shipments must use traceable freight methods. All deliveries are FOB destination, with inspection and acceptance occurring at the final delivery point and no quantity variance permitted. The contract references DLA’s Master List of Technical and Quality Requirements for mandatory specifications and uses the DoD unit of issue system. Delivery dates are set for January 16 and January 21, 2026, respectively, with contact and shipping details explicitly provided for each destination.

Defense Logistics Agency

POSTED

DEADLINE

Painting and Coating Application (Industrial)This contract is a subcontract for industrial painting and coating application services tied to a paint booth at Nellis Air Force Base, Nevada, with a ZIP code of 89191. The work includes essential support functions such as booth calibration, safety inspections, and assistance with coating application procedures. It is designated as a total small business set-aside under SBA regulations, meaning only small businesses are eligible to bid, in accordance with FAR 19.5. The North American Industry Classification System code for this procurement is 332813, which corresponds to metal coating, engraving, and allied services. The opportunity was posted on July 28, 2026, and responses are due by August 21, 2026, at 5:00 PM. The contracting agency is listed as FA4861 99 Cons Lgc under the Department of Defense, though no specific point of contact or office address details are provided.

FA4861 99 Cons Lgc

POSTED

DEADLINE

Protective Coating and Corrosion Resistance ApplicationThe contract involves the application of weather-resistant and anti-corrosion coatings, including powder coating and galvanizing, to protect materials exposed to outdoor conditions, ensuring long-term durability and structural integrity. The work is intended for use at facilities associated with DFW International Airport in Texas, with all coatings meeting required standards for environmental resilience and corrosion prevention under harsh outdoor exposure. This subcontract opportunity is open for responses until July 30, 2026, and is classified under NAICS code 332813, which pertains to metal coating, engraving, and allied services. The solicitation was posted on July 27, 2026, and is exclusively accessible through the DFW Airport BonfireHub portal, with no formal set-aside designation specified. Contractors must prepare and submit proposals addressing technical specifications for coating application and compliance with performance standards expected in high-traffic, outdoor aviation infrastructure environments.

Dfw International Airport

POSTED

DEADLINE

in about 14 hours

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

ELECTRONIC COMPONEN

Solicitation # SPE7M1-26-T-237M

This contract under solicitation SPE7M1-26-T-237M pertains to the procurement of one electronic component identified by NSN 5998-01-659-2133, with a required delivery within 20 days of award and delivery terms set at FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific design control tied to multiple revision-controlled drawings dated between 2009 and 2024. Packaging and preservation must adhere to MIL-STD-2073-1E and the special packaging instruction SPI AM1305671 dated September 12, 2024, while labeling follows MIL-STD-129 and palletization complies with DLA Packaging Requirements. The contract mandates Cybersecurity Maturity Model Certification Level 2 self-assessment and applies Covered Defense Information protocols. Inspection and acceptance occur at origin, with zero variance allowed in quantity. The delivery destination is Camp Carroll, Waegwan, South Korea, and shipping must follow DLA transport procedures C19 and C20. The supplier must also comply with requirements for removal of government identification from non-accepted supplies and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. All documentation, marking, and unit of issue must align with DLA and ANSI standards.

Bare Printed Circuit Board Manufacturing

POSTED

about 12 hours ago

DEADLINE

MOTOR, ALTERNATING C

Solicitation # SPE7M1-26-T-237D

This contract pertains to the procurement of one unit of an Alternating Current Motor with NSN 6105-01-502-5614 under solicitation SPE7M1-26-T-237D, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a Critical Application Item, manufactured by Illinois Tool Works Inc. with part number 008359, and must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB Origin. The quantity is strictly fixed at one unit with no variance allowed. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 under DLA’s packaging requirements, utilizing specific preservation methods and container codes, and must be shipped via traceable means, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is June 29, 2026, and inspection and acceptance occur at the destination. Shipping must follow DLAD Procurement Notes C19 and C20, and vendor shipment must use the assigned Traceability Control Number. The point of contact for the contract is Michael Reese, with contract data including NAICS code 335312 and official solicitation links for reference.

Motor and Generator Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-237Q

The contract specifies the procurement of piston rings identified by part number 18-20420-8R1 and NSN 4310017062926, with a total quantity of four units divided into two line items: two units at $4.00 each and two units at $2.00 each, both totaling $12.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance—exactly four units must be delivered. All items must be prepared for shipment in compliance with MIL-STD-2073-1E packaging standards, marked according to MIL-STD-129, and palletized per DLA’s RP001 requirements. Special marking is not required. Shipment must be sent via the fastest traceable method, strictly prohibiting parcel post, and delivered to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. The original required delivery date is July 27, 2026, and the contract is governed by Department of Defense logistics procedures including DLA Procurement Notes C19 and C20 for transportation. The solicitation number is SPE7M1-26-T-237Q, under NAICS code 333912, and the point of contact for inquiries is Michael Reese at DLA.

Air and Gas Compressor Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-Q-1274

The contract specifies the procurement of 120 kits of thegas detector with NSN 6665-01-690-8588 under solicitation SPE7M1-26-Q-1274, issued as a total small business set-aside with a firm fixed price structure. Delivery is required within 100 days after award, with FOB origin and inspection and acceptance occurring at the destination. Packaging and preservation must comply strictly with MIL-STD-2073-1E, Appendix D, for kits, requiring that all components be individually protected against corrosion and damage, with loose hardware sealed in bags or boxes and no bulk shipping permitted. Preservation methods must match the most critical item within each kit, and every kit must include a parts list detailing component names, numbers, and quantities. Marking must adhere to MIL-STD-129, including serial numbers on unit, intermediate, and shipping containers, with matching serial data on the packing list. Packaging must also follow DLA’s standardized requirements and avoid any mercury or mercury compounds. The contract mandates zero-defect acceptance sampling under MIL-STD-1916 or equivalent zero-based plans, with verified attributes assigned specific verification levels or AQLs, and any unspecified attributes treated as major. If MIL-STD-105/ASQ Z1.4 is used, acceptance requires zero non-conformances unless otherwise stated. The detector model is specified as Honeywell Analytics Inc. P/N HU-X1W1H1M1Q1-Y-NV, and may contain batteries, subject to hazardous material handling rules. Pricing is structured in tiered quantity brackets from 120 to 300 units, with delivery scheduled at 100 days for all tiers. A required unit of issue is KT (kit), and all packaging elements must be fully compliant with DLA’s packaging requirements, including proper labeling and segregation per MIL-STD-2073-1 Appendix D. The contract includes technical and quality requirements referenced from the DLA Master List, and all materials must arrive in fully serviceable condition without requiring further sorting or repackaging by the end user.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

TRANSDUCER, SERVOVAL

Solicitation # SPE7M1-26-T-238D

This contract pertains to the procurement of a transducer, servovalve identified by NSN 4810-01-153-8090, with a quantity of six units to be delivered within 70 days under solicitation SPE7M1-26-T-238D. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management protocols, and inspection and acceptance procedures conducted at origin. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, while marking follows MIL-STD-129 without special codes, and palletization aligns with DLA packaging guidelines. Delivery is FOB origin to the specified warehouse in Tracy, California, with no variance allowed in quantity. The contract prohibits intentional inclusion of mercury or mercury-containing compounds except in specified functional applications such as batteries, instruments, or Navy-controlled systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies that unit identification is not required, and transportation logistics are governed by DLA procedural notes C19 and C20. The required delivery date is December 4, 2027, though an earlier ship date of October 20, 2026, has been indicated. The point of contact for inquiries is Sara Wilson of the Department of Defense, Maritime Supply Chain.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTACTOR, MAGNETIC

Solicitation # SPE7M1-26-T-238C

This contract issued by the Defense Logistics Agency pertains to the procurement of magnetic contactors under NSN 6110011019710 and part number 70550-02028-101, with quantities of 61 units required at a unit price of $61.00 for a total contract value of $3,721. The product is classified as a critical application item for Sikorsky Aircraft Corporation, Te Connectivity Corporation, and National Machine Company, and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the supplied hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked according to MIL-STD-129 with no special marking codes, and palletization must meet DLA packaging standards. Delivery is FOB origin with zero variance permitted and inspection and acceptance occurring at the destination. The required delivery date is January 2, 2027, with a shipment deadline of January 11, 2027, and delivery must be completed within 153 days of award. The solicitation was issued under a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 10, 2026, and procurement is governed by DLA procedures for transportation and shipping to Corpus Christi, Texas.

Relay and Industrial Control Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTACTOR, MAGNETIC

Solicitation # SPE7M1-26-T-237G

The contract pertains to the procurement of one magnetic contactor starter unit with NSN 6110-01-411-9297, supplied by General Electric Company under solicitation SPE7M1-26-T-237G. Deliveries are due within 20 days of contract award and must be shipped FOB destination with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking with no special codes. The item is to be delivered to USNS PILILAAU T AKR 304 in FPO AP 96675, with transportation governed by DLA procedural notes C19 and C20. Strict sampling protocols apply per MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise stated, with attributes designated as critical, major, or minor and corresponding verification levels or AQLs assigned accordingly. Mercury and mercury-containing compounds are prohibited in any hardware or supply unless specifically exempted for functional uses such as batteries, fluorescent lamps, or controlled instruments, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by solicitation or award date depending on acquisition size. All requirements are binding, and the contractor must adhere to the designated unit of issue, delivery schedule, and government-specific identifiers for compliance.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTROLLER, MOTOR

Solicitation # SPE7M1-26-T-238H

The contract specifies the procurement of one unit of a motor controller with NSN 6110015270208 and part number PL215-023-010, supplied by Carolina Power Systems of Sumter Inc, designated as a critical application item. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the final destination. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines, including palletization requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be labeled and shipped according to DLA procedures, with delivery addressed to USS SAN ANTONIO LPD 17 at FPO AE 09587, under shipment code RDD 777 and transportation reference DLAD PROC NOTES C19 and C20. The original required delivery date is July 2, 2026, and the contract is governed by solicitation SPE7M1-26-T-238H under a federal procurement framework managed by the Department of Defense’s Maritime Supply Chain.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

RESISTOR, CHIP, FIXED

Solicitation # SPE7M1-26-T-238F

This contract specifies the procurement of 42 units of a fixed chip resistor with part number TNPW121034K0BETA from VISHAY DALE ELECTRONICS, LLC, identified by NSN 5905-01-689-2990. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-39032 for resistors, and MIL-STD-129, with special marking code ZZ-ZZ applying. The item must be delivered FOB origin within 84 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, California. The need ship date is November 3, 2026, and the original required delivery date is December 31, 2026. The unit of issue is each, priced at $42.00 per unit for a total value of $1,764. Transportation logistics follow DLA Procurement Notes C19 and C20, and all packaging must align with palletization standards outlined in RP001. The contract is issued under solicitation SPE7M1-26-T-238F, with responses due by August 10, 2026, and falls under NAICS code 334416 for electronic component manufacturing.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 12 hours ago

DEADLINE

COMPRESSOR UNIT, REC

Solicitation # SPE7M1-26-T-237J

The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-237P

The contract is for one piston ring with part number 18-20419-12R1 and NSN 4310-01-706-4138, issued by the Defense Logistics Agency under solicitation SPE7M1-26-T-237P. Delivery is required within 20 days of contract award, with shipments to be delivered FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. Palletization must follow DLA’s RP001 packaging requirements, and parcel post is prohibited—shipment must be sent by the fastest traceable means. The required delivery date is July 27, 2026, and the contract is assigned to DLA vendors who must use the VSM system for fulfillment. The item falls under NAICS code 333912 and is procured by the Department of Defense through the Maritime Supply Chain office.

Air and Gas Compressor Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-237L

The contract pertains to the procurement of one piston ring, part number 18-20416-7R1 and NSN 4310-01-706-3788, under solicitation SPE7M1-26-T-237L, with a required delivery within 20 days of award to the USS HYMAN G RICKOVER at FPO AE 09591. The item must be delivered FOB destination with zero variance in quantity and is subject to inspection and acceptance at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Supplier shipment must be made via the fastest traceable means, excluding parcel post, using the V27157 vendor code and RDD 777 for logistics tracking. The contract specifies the unit of issue as each, priced at one dollar, with total price reflecting the single unit. The supplier is directed to use VSM for DLA shipments, and the procurement is tied to project JK5 TP 3 under supply chain support code YNEA01. All delivery logistics, transportation procedures, and compliance are bound by DLA procedural notes C19 and C20, and the contract includes a required delivery date of July 27, 2026.

Air and Gas Compressor Manufacturing

POSTED

about 12 hours ago

DEADLINE