Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Painting and Coating Application

Active

Federal

Response Deadline08/21/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of military-specification primers and topcoats to AGE and MUNS trailers using climate-controlled booths, ensuring strict adherence to MIL-PRF-32550 and technical order standards. All work must be performed with precision to meet federal defense quality requirements, with attention to surface preparation, coating consistency, and environmental controls during the painting process. The performance location is designated as Yigo, 96929, and the contract is structured as a small business set-aside under the SBA program, specifically reserved for total small business participation in accordance with FAR 19.5. The North American Industry Classification System code 332813 identifies the scope as metal coating, engraving, and related services. Proposals must be submitted by the deadline of August 21, 2026, and the contracting activity is under the Department of Defense through the FA5240 36 Cons Lgc office.

General Info

Apply MIL-PRF-32550 coatings to trailers in Yigo per defense standards, small business set-aside, props by Aug 21, 2026.

Agency

Department Of Defense → FA5240 36 Cons LgcView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

Yigo, GU, 96929, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 01:00:00 AM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA5240 36 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA5240 36 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply military-specification primers and topcoats to AGE and MUNS trailers using climate-controlled booths and in compliance with MIL-PRF-32550 and TO standards.

Similar Contracts

Same NAICS industry code

Protective Coating and Corrosion Resistance ApplicationThe contract involves the application of weather-resistant and anti-corrosion coatings, including powder coating and galvanizing, to protect materials exposed to outdoor conditions, ensuring long-term durability and structural integrity. The work is intended for use at facilities associated with DFW International Airport in Texas, with all coatings meeting required standards for environmental resilience and corrosion prevention under harsh outdoor exposure. This subcontract opportunity is open for responses until July 30, 2026, and is classified under NAICS code 332813, which pertains to metal coating, engraving, and allied services. The solicitation was posted on July 27, 2026, and is exclusively accessible through the DFW Airport BonfireHub portal, with no formal set-aside designation specified. Contractors must prepare and submit proposals addressing technical specifications for coating application and compliance with performance standards expected in high-traffic, outdoor aviation infrastructure environments.

Dfw International Airport

POSTED

DEADLINE

Marine Coating and Corrosion ProtectionThe contract pertains to the application of anti-fouling and corrosion-resistant coatings on propeller surfaces to ensure long-term durability in harsh marine environments. It is issued as a subcontract under the NAICS code 332813, which corresponds to ship and boat building and repairing, and is managed by the Sflc Procurement Branch 2 within the Department of Homeland Security. The work must be performed in accordance with technical specifications designed to protect propellers from biofouling, saltwater degradation, and mechanical wear, thereby maintaining optimal vessel performance and extending service life. The solicitation was posted on July 27, 2026, with a firm deadline for responses set for August 2, 2026, at 5:00 PM, and no set-aside provisions have been specified for small businesses or other categories. Performance location details are not provided, and there is no designated point of contact listed in the public record. Interested parties must submit proposals through the provided SAM.gov portal before the deadline to be considered.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Galvanizing and Corrosion Protection Services

Transportation and Development

POSTED

DEADLINE

Precision Metal Casting and Machining of Sleeve BearingsThe contract pertains to the manufacture of precision sleeve bearings utilizing metal casting and machining techniques that must adhere to stringent military specifications including MIL-STD-1916 and ASTM B438, ensuring high-quality standards for defense applications. The work requires strict compliance with industry-certified material and process protocols to meet performance, durability, and dimensional tolerances critical for military systems. Production must be executed with full traceability and quality control measures consistent with federal defense manufacturing requirements. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of August 3, 2026. Classified under NAICS code 332813 for Metal Crown, Cap, and similar bearing manufacturing, the contract does not specify a set-aside type or location for performance. Interested parties must submit proposals through the official DIBBS portal prior to the deadline, ensuring all technical, regulatory, and submission criteria are fully met to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Item Unique Identification (IUID) Marking ServicesThe contract requires permanent Item Unique Identification (IUID) marking of a liquid level switch in full compliance with MIL-STD-130 and DFARS regulations, specifically involving data matrix bar code etching to ensure durable, machine-readable identification. The marking must be executed with precision to meet federal standards for traceability and lifecycle management of defense equipment, with subsequent submission of all required data to the Defense Logistics Agency’s IUID registry. This work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and is governed by NAICS code 332813 for precision instrument manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the work supports the U.S. military’s requirement for standardized, permanent identification of critical components. All submissions must adhere strictly to IUID data formatting and marking specifications to ensure acceptance into federal supply chain systems, and failure to meet these requirements may result in rejection of deliverables or non-payment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Washer ManufacturingThe contract pertains to the manufacture of a precision metal washer component designated as WASHER, KEY with NSN 5310013179027, to be produced in strict compliance with MIL-DTL-21338B and MS19070C specifications. The work encompasses full lifecycle production including material acquisition, precision machining, surface finishing, and proper packaging to meet military standards. Production must be carried out at the designated place of performance in New Cumberland, Pennsylvania, with the end product destined for U.S. Department of Defense use under the ASC Commodities Division. The solicitation is structured as a subcontract opportunity, with a NAICS code of 332813 indicating classification under Other Fabricated Metal Product Manufacturing. Interested parties must submit responses by August 3, 2026, with the opportunity posted on July 26, 2026, and details accessible via the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract requires the application of phosphate coating to gun loader components to ensure compliance with military standards for corrosion resistance and surface finish. This subcontract is part of a broader effort by the Department of Defense through the LAND SUPPLY CHAIN organization to maintain the durability and operational readiness of critical weapon system components. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the NAICS code 332813 identifies the classification under which the work falls, relating to metal coating, engraving, and related services. Bidders must submit their responses by the deadline of August 6, 2026, and the solicitation was posted on July 26, 2026. The contract is structured as a subcontract, indicating it supports a larger procurement or prime contract initiative under a defense supply chain. While no set-aside type or specific point of contact is provided, the details confirm the project is strictly governed by military performance specifications and requires precise adherence to surface treatment protocols to ensure compatibility and longevity in operational environments. The official solicitation can be accessed through the DIBBS portal using the provided link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating and Surface Treatment ServicesThe contract seeks subcontracted services for the application of phosphate coating to metal components in accordance with military specifications to achieve optimal corrosion resistance and enhanced paint adhesion. The work must strictly comply with RQ036 and SPI AM61673128 REV H standards, ensuring that all surface treatments meet required performance and quality benchmarks. The North American Industry Classification System code 332813 identifies the scope as metal finishing, plating, and coating services, focusing on specialized industrial treatments critical to defense manufacturing. The contract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance designated to occur at a facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026. This is a subcontract opportunity with no set-aside designation, indicating it is open to all eligible vendors without restriction based on business size or ownership type. Interested parties must access the full solicitation details through the provided DIBBS link to prepare compliant submissions.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Phosphate Coating ApplicationThe contract requires the provision of certified phosphate coating services for firearm components in strict adherence to military specifications, ensuring dimensional integrity, corrosion resistance, and performance under operational conditions. The work must comply with all applicable defense standards, including full traceability of materials and processes, rigorous controls over restricted substances such as those governed by REACH and RoHS, and verification of supplier certification throughout the supply chain. The contractor must demonstrate proven experience in supporting military-grade firearm production with documented quality assurance systems and approved metallurgical treatments. Performance is expected to meet the high-reliability demands of defense applications, with all processes subject to inspection, audit, and documentation retention as required by the Department of Defense. The subcontract is issued under NAICS code 332813 for metal coating and related services, managed by the Defense Logistics Agency. Bidders must submit responses by August 3, 2026, and are expected to operate under stringent compliance frameworks that ensure accountability at every stage of coating application, handling, and delivery, with no exceptions for non-conforming materials or procedures.

Defense Logistics Agency

POSTED

DEADLINE

Coating and Corrosion Protection ApplicationThe contract titled Coating and Corrosion Protection Application is a small business set-aside solicitation under the NAICS code 332813, issued by the Department of Defense through the Commanding General. It seeks subcontractors to apply protective coatings including powder coat, epoxy, and thermal spray technologies to equipment and components exposed to harsh field conditions, with the primary goal of preventing rust and mitigating wear. The work is specifically performance-based and must be carried out at the designated location in Twentynine Palms, California, with a zip code of 92277. All interested parties must submit responses by the deadline of July 29, 2026, at 4:00 PM Eastern Time, and only small businesses certified under the SBA’s total small business set-aside program are eligible to bid. The solicitation was posted on July 24, 2026, and is intended to support defense operations by ensuring the longevity and reliability of critical assets under demanding environmental conditions.

Commanding General

POSTED

DEADLINE

in about 20 hours

Brazing Services for Aerospace ComponentsThe contract seeks qualified subcontractors to perform precision brazing on aerospace components, ensuring high-integrity joints that meet stringent aerospace standards. Work must be executed in strict accordance with approved procedures and supporting technical data packages, emphasizing accuracy, consistency, and adherence to industry-specific quality benchmarks. The requirement is tied to a NAICS code of 332813, indicating specialized metal joining activities critical to defense and aviation systems. This subcontract opportunity is posted under the Department of Defense, specifically through the FA8118 Afsc Pzabb office, with performance required at the site in S Coffeyville. The solicitation was made public on July 24, 2026, and responses must be submitted no later than August 8, 2026. While no set-aside designation is specified, the nature of the work and the defense agency involvement suggest a focus on experienced contractors with proven capabilities in high-reliability brazing for aerospace applications. All participation must comply with the technical and regulatory expectations of DoD contracting practices.

FA8118 Afsc Pzabb

POSTED

DEADLINE

Heat Treatment Services for Aerospace ComponentsThe contract requires the provision of heat treatment services for aerospace components under strict adherence to AS9100 Rev C and NADCAP standards, ensuring full process validation and comprehensive traceability throughout all manufacturing stages to support government audit readiness. All work must meet the rigorous quality and documentation requirements expected in defense and aerospace applications, with emphasis on precision, consistency, and accountability in every step of the heat treatment process. The contract is classified as a subcontract under NAICS code 332813, with a posted date of July 24, 2026, and a response deadline of August 8, 2026. Performance will occur at a facility located in Coffeyville, and the contracting entity is the Department of Defense, specifically the FA8118 Afsc Pzabb office. While the solicitation number and point of contact are not provided, bidders must ensure full compliance with federal procurement protocols and demonstrate proven capability in handling aerospace-grade materials under regulated conditions.

FA8118 Afsc Pzabb

POSTED

DEADLINE

More opportunities from Department Of Defense → FA5240 36 Cons Lgc

Same awarding agency

Paint and Coating Materials SupplyThe contract is for the supply of military-specification paints, primers, and surface treatment chemicals exclusively for corrosion control and painting operations on military trailers. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and is classified under NAICS code 424690 for other miscellaneous chemical and allied products merchant wholesalers. The opportunity is managed by the Department of Defense through the FA5240 36 Cons Lgc office, with performance required at Yigo, Guam, 96929. Bids must be submitted by August 21, 2026, at 1:00 AM, following the posting date of July 27, 2026. All materials must meet rigorous military standards to ensure durability and compliance in demanding operational environments.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Fiberglass and Composite ReworkThis contract calls for the repair or replacement of damaged fiberglass and composite panels on AGE equipment using military-approved lay-up and resin techniques, ensuring adherence to federal defense standards for durability and performance. The work must be performed by a qualified small business under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 326199 applying to other plastic product manufacturing. Performance is required at Yigo, Guam, with a zip code of 96929, and the contract is structured as a subcontract under the Department of Defense, specifically the FA5240 36 Cons Lgc office. All work must meet military specifications for composite restoration, and contractors are expected to possess expertise in advanced materials and aerospace-grade repair protocols. The solicitation was posted on July 27, 2026, with a strict response deadline of August 21, 2026, at 1:00 AM local time. The opportunity is accessible via the SAM.gov platform, and while no point of contact is listed, interested parties must submit proposals in compliance with federal subcontracting regulations and technical requirements tied to defense equipment maintenance. The location in Yigo indicates this work supports operations in the Indo-Pacific region, and only small businesses certified under the SBA's set-aside program are eligible to compete. Contractors must be prepared to demonstrate past performance in military-grade composite repairs and adherence to approved resin curing and lay-up methodologies.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Welding and Metal Fabrication RepairThe contract calls for structural welding and metal fabrication services to repair damaged frames and components on AGE and MUNS trailers, ensuring compliance with AWS D1.1 welding standards and applicable military technical orders. All work must meet rigorous quality and safety requirements typical of defense sector maintenance, with a focus on restoring structural integrity and operational readiness of military equipment. The scope is limited to repair tasks only, excluding new construction or modification beyond the original design specifications. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. The opportunity is managed by the Department of Defense through the FA5240 36 Cons Lgc organization, with performance required at Yigo, 96929. Interested parties must submit responses by August 21, 2026, at 1:00 AM, following the solicitation posted on July 27, 2026. The work demands certified welders, appropriate equipment, and a proven ability to adhere to military specification standards in a remote operational environment.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Media and Water Blasting for Corrosion RemovalThe contract requires media and water blasting services to remove corrosion and prepare metal surfaces on Aerospace Ground Equipment and Munitions Trailers to meet SSPC-SP 10/NACE No. 2 surface preparation standards, ensuring a near-white metal finish suitable for protective coatings. This effort is critical to maintaining the integrity and operational readiness of defense-related equipment by preventing further degradation and extending service life through proper surface conditioning. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, restricting eligibility to verified small businesses as defined by FAR 19.5. The work is tied to NAICS code 562910 for remediation services and will be performed at a location in Yigo, Guam with the ZIP code 96929. The opportunity was posted on July 27, 2026, and responses must be submitted by August 21, 2026, with the contracting activity under the Department of Defense’s FA5240 36 Cons Lgc office.

Remediation Services

POSTED

DEADLINE

36 MXG Corrosion Control Repair and Paint ServicesThis contract is a combined synopsis and solicitation for a small business set-aside under FAR 19.5, issued as an indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price (FFP) contract for corrosion control repair and paint services on Guam, primarily for Aerospace Ground Equipment (AGE) and Munitions (MUNS) Trailers. The solicitation number is FA524026Q0017, with a five-year ordering period from September 7, 2026, to September 6, 2031, and a maximum contract lifecycle of five years and six months to accommodate orders issued near the end of the ordering period. The total ceiling value is $7,100,000, with individual task orders subject to a minimum order value of $2,500. Work must be performed at the contractor’s facility on Guam, though exceptions may apply as specified in task orders, and all deliveries are FOB destination, with final inspection and acceptance occurring at locations designated in each order, such as Andersen Air Force Base. Contractors are required to remove corrosion, perform surface preparation, apply protective coatings per Technical Orders like TO 1-1-691 and TO 1-1-8, and replace hardware under the micro-purchase threshold, using approved methods such as MIL-DTL-5541 and MIL-PRF-32550 for chemical conversion and zinc-rich priming. Personnel must hold current certifications, use appropriate personal protective equipment, and comply with OSHA standards, while also applying all required markings and stencils in accordance with TO 35-1-3 and TO 35-1-18. The contract includes stringent cybersecurity requirements under 252.204-7012 and 252.204-7008, prohibits hexavalent chromium, mandates adherence to the safeguarding of covered defense information, and bans procurement from the Xinjiang region and business with the Maduro regime. Offerors must submit proposals in three volumes via email to three designated points of contact no later than 11:00 a.m. Chamorro Standard Time on August 21, 2026, with pricing required exclusively in a specified .xlsx format and past performance information limited to a fact sheet and questionnaire. The evaluation is strictly lowest-priced, technically acceptable, requiring full conformance to all mandatory requirements without trade-offs

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Kitchen Equipment (Blast Chiller, Tilt Skillet and Conveyor Dishwasher)This solicitation seeks a single conveyor dishwasher, blast chiller, and tilt skillet that fully comply with the salient characteristics outlined in Attachment 1, with no deviations permitted. Offers must be submitted exclusively via email to both Gregor Hoessel and SrA Keegan Tunnicliff, and each vendor may submit multiple quotes, but each will be treated as a separate offer. All submissions must be received by 10:00 AM Chamorro Standard Time on August 11, 2026; oral quotes are not accepted, and emailed responses must arrive in the designated inboxes with all attachments accessible. The government is not responsible for failed deliveries or unreadable files, and vendors are required to obtain explicit confirmation of receipt. Any inquiries about the solicitation must be submitted by 10:00 AM ChST on June 6, 2026, also sent to both contacts. This is a total small business set-aside under NAICS code 333241, managed by the Department of Defense through the FA5240 36 Cons Lgc office located in APO, AP, with performance required in Yigo, Guam.

Food Product Machinery Manufacturing

POSTED

DEADLINE

Unable to decompose sub-opportunities due to lack of access to prime contract dataNo subcontract opportunities can be identified or structured due to the absence of access to the prime contract’s scope, CLINs, or statement of work, preventing any meaningful breakdown or targeting of subcontracting roles. The opportunity is posted as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility exclusively to small businesses, though the NAICS code, organization type, and point of contact remain unspecified. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and the place of performance is located in Yigo, 96929, under the Department of Defense’s FA5240 36 Cons Lgc office. Despite the open solicitation, the lack of core contract details renders it unactionable for potential subcontractors seeking to participate.

POSTED

DEADLINE

Sources Sought 36 CES/CEF Radios for Engine 16 and 20The U.S. Department of Defense through the 36th Contracting Squadron is seeking information from small businesses to support a potential acquisition for 36 CES/CEF Radios destined for Engine 16 and Engine 20, under solicitation number FA524026S3002. This sources sought notice is issued as a total small business set-aside in accordance with FAR 19.5, meaning only small businesses are eligible to respond, and the NAICS code 334220 applies to the manufacturing of communications equipment. Responses are due by July 31, 2026, at 2:00 AM Eastern Time, with the solicitation posted on July 24, 2026. The anticipated performance location is in Yigo, Guam, 96929, while the contracting office is situated at APO AP 96543-4040. Primary point of contact for inquiries is Andre Conley, reachable at 671-366-7551 and andre.conley@us.af.mil, with Coree Asprer listed as the secondary contact at 671-366-6628 and coree.asprer.1@us.af.mil. Further details on requirements are to be found in the attached Sources Sought Notice and Performance Work Statement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Towable Passenger Stairs Supply and DeliveryA single 506 EARS Towable Passenger Stairs unit is to be supplied, shipped, and delivered to Andersen Air Force Base in Yigo, Guam, with all components meeting detailed technical specifications and Department of Defense procurement standards. The contract is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 336413 for aircraft equipment manufacturing. The solicitation was posted on July 23, 2026, with proposals due by 3:00 AM Eastern Time on July 30, 2026, and the delivery location is fixed at the Yigo, Guam, zip code 96929. All work must comply with federal contracting regulations and ensure full operational readiness for military aircraft passenger handling at the designated installation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

506 EARS TOWABLE PASSENGER STAIRSThe contract solicitation for 506 EARS TOWABLE PASSENGER STAIRS, identified by solicitation number FA524026Q0024, is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA. The NAICS code 336413 applies to this procurement, which is managed by the Department of Defense through the agency office FA5240 36 Cons Lgc located in APO, AP 96543-4040. All inquiries must be directed via email only to June G. Borja and Lauren Reyes no later than July 28, 2026, at 1:00 PM, and no responses will be provided for questions submitted after this deadline. The final quote package is due by 30 July 2026 at 1:00 PM Chamorro Standard Time, with the contract performance to occur in Yigo, Guam, 96929. Both points of contact, June Borja and Lauren Reyes, are listed with their respective phone numbers for coordination, and additional information can be accessed through the provided SAM.gov link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Asbestos Abatement and HAZMAT Compliance Support

Remediation Services

POSTED

DEADLINE

Initial Site Assessment and Baseline Survey

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE