Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Metal Fabrication & Installation

Active

State & Local

Response Deadline09/30/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the fabrication and installation of custom metal components for prime contractors working on New York City Department of Design and Construction projects. The scope of work includes the production of building components, the application of coatings to steel exposed during masonry work, and the delivery and installation of fabricated metal elements at sites located within New York City. The project is categorized under NAICS code 332312 and was posted on September 23, 2026, with a response deadline of September 30, 2026. Interested parties can find further details and manage the application process through the New York City Passport portal.

General Info

Fabrication and installation of custom metal components for NYC Department of Design Construction.

Agency

New York → Department Of Design And Construction

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

New York, NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 85027Y0179.

The full solicitation package (14 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

85027Y0179-122 Community Center - Facade restoration - PV788-FAC - Special Inspection

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 12:00:00 AM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew York → Department Of Design And Construction

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew York → Department Of Design And Construction

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs custom metal components for prime contractors on City of New York Department of Design and Construction projects. Performs metal fabrication for building components and applies coatings to steel uncovered during masonry work. Delivers fabricated metal elements installed on-site.

Similar Contracts

Same NAICS industry code

Mounting Bracket ManufacturingThis subcontract for the Department of Defense Land Supply Chain involves the fabrication of mounting brackets for prime contractors fulfilling DLA supply contracts. The scope of work requires precision machining, cutting, and forming of metal to achieve specific bracket geometries based on technical drawings and raw materials defined in the Technical Data Package. Production must utilize CNC machines, presses, or lathes and strictly adhere to RA001 technical and quality requirements as well as RP001 packaging standards. The project is categorized under NAICS code 332312 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by October 5, 2026, following the posting date of September 24, 2026. The final deliverable consists of finished mounting brackets that meet all specified technical and quality benchmarks.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Waste Drain Stoppers (NSN 4510-00-933-9953)This subcontract involves the manufacture and supply of 106,000 waste drain stoppers under NSN 4510-00-933-9953 for prime contractors supporting DLA Troop Support. The fabrication process must strictly adhere to Reference Drawing 19207 12416580-002 and Technical Data Package Rev A Gen 1, while ensuring full compliance with MIL-STD-1916 NOT 2 and the Buy American Act requirements as specified in DFARS 252.225-7001. The completed units are to be delivered to the DLA Distribution Depot Hill in Utah. This procurement falls under NAICS code 332312 and is managed by the Department of Defense.

POSTED

about 9 hours ago

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-26-T-434Z

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-275U

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

TREAD, METALLIC, NONSKID

Solicitation # SPE7M4-26-T-438R

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Street Light Pole ProcurementThis subcontract opportunity with the City of Santa Ana involves the procurement, supply, and delivery of five street light poles for prime contractors working on Public Works projects. The required poles must conform to Caltrans Standard Plan 1126E and meet all specific City of Santa Ana specifications, with delivery to the designated project locations within Santa Ana, California. The solicitation was posted on September 23, 2026, and requires a response by October 7, 2026. This procurement falls under NAICS code 332312 and is specifically designed for the infrastructure needs of the local municipality.

CITY OF SANTA ANA

POSTED

DEADLINE

Traffic Signal Pole and Mast Arm SupplierThis subcontract involves the supply of traffic signal poles and mast arms for prime contractors working on City of Fresno Public Works Department projects. The scope of work includes the manufacture or procurement of specific components, including 1-A (7’), 19-4-100, and 24-4-100 signal poles, as well as 25’ and 35’ mast arms. All delivered products must strictly adhere to City of Fresno Specifications and maintain Buy America Certification. The agreement covers the delivery of five physical traffic signal components on an F.O.B. Destination basis. Performance of these services will take place in Fresno, California. The solicitation was posted on September 23, 2026, with a response deadline of October 13, 2026.

POSTED

DEADLINE

Air-Ride Steel Platform FabricationThis subcontract involves the fabrication and installation of a steel platform designed for prime contractors working on Texas Department of Transportation equipment procurement projects. The scope of work focuses on professional welding and steel fabrication to integrate an air-ride suspension system onto a truck chassis, providing a stable base necessary for the operation of striping guns. All deliverables must strictly adhere to TxDOT specifications regarding durability and stability. The final requirement is the delivery of a completed steel platform with a fully integrated air-ride suspension system. This opportunity is categorized under NAICS code 332312 and is associated with the Texas Department of Transportation.

Texas Department Of Transportation

POSTED

DEADLINE

Specialized Fencing Material SupplyThis subcontract for Specialized Fencing Material Supply supports prime contractors working on projects for Wicomico County Recreation, Parks, and Tourism in Maryland. The scope of work involves providing high-quality raw materials and components, including 9-gauge black vinyl-coated or galvanized chain-link fabric, Schedule 40 or SS40 steel pipe for posts, and malleable cast iron fittings and post tops. Additionally, the supplier must provide Midwest Tube Mills MT 30 high strength pipe featuring a black polyester/polyolefin coating. All supplied materials must strictly adhere to ASTM requirements and be delivered F.O.B. destination. The solicitation was posted on September 23, 2026, with a response deadline of October 28, 2026. This contract falls under NAICS code 332312 and is managed through the Wicomico County procurement portal.

Wicomico County Recreation, Parks, & Tourism

POSTED

DEADLINE

in about 1 month

Metal Cutting, Grinding, and Surface PreparationThis subcontract for the State of Rhode Island focuses on metal cutting, grinding, and surface preparation to support prime contractors on agency projects. The scope of work involves the precise cutting, grinding, and fitting of components, as well as surface cleaning and smoothing to ensure high weld quality. These tasks are performed using industrial grinders, metal shears, cutting torches, and specialized surface preparation tools in accordance with industry standards to deliver components ready for welding. The contract is categorized under NAICS code 332312 and was posted on September 23, 2026, with a response deadline of April 2, 2031. Interested parties can find further information and bidding opportunities through the Rhode Island Department of Procurement website.

State of Rhode Island

POSTED

DEADLINE

in over 4 years

Steel Water Tank Fabrication and SupplyThis subcontract for Steel Water Tank Fabrication and Supply involves the production and delivery of fabricated steel tanks for prime contractors working on Public Service Commission of Yazoo City water works projects. The scope of work includes the fabrication of tank shells, floors, and roofs, as well as the application of interior and exterior coatings and linings in accordance with AWWA standards. The contractor is responsible for utilizing industrial coatings and managing the transport of oversized loads to ensure the completed components are delivered to the project site in Yazoo City, Mississippi. The opportunity was posted on September 23, 2026, with a response deadline of October 9, 2026. Classified under NAICS code 332312, the contract is managed by the agency MPTAP within the state of Mississippi.

POSTED

DEADLINE

Water Pipe & Fitting SupplyThis subcontract for Water Pipe and Fitting Supply involves the procurement and delivery of essential infrastructure materials for Lowndes County Board of Supervisors water system extension projects. The scope of work includes supplying ductile iron and PVC piping, gate valves, fire hydrants, and couplings to prime contractors at designated project sites. A critical requirement of this contract is the verification of domestic content in compliance with the Build America, Buy America Act. The solicitation was posted on September 23, 2026, with a response deadline of October 9, 2026, and falls under NAICS code 332312.

POSTED

DEADLINE

More opportunities from New York → Department Of Design And Construction

Same awarding agency

SBS Membrane RoofingThis subcontract opportunity is for the installation of SBS Modified Bituminous Membrane roofing on projects managed by the New York City Department of Design and Construction. The selected contractor will be responsible for applying these membranes to roof surfaces to deliver a fully waterproofed roofing system while working under prime contractors. The project is located in New York and falls under NAICS code 238160. Interested parties must submit their responses by the deadline of September 30, 2026, following the posting date of September 23, 2026.

Roofing Contractors

POSTED

DEADLINE

Slate RoofingThis subcontract opportunity is for the installation of slate shingles on roof surfaces for prime contractors working on projects managed by the New York City Department of Design and Construction. The selected provider will be responsible for the delivery of completed slate roofing systems within New York. The solicitation is categorized under NAICS code 238160. Interested parties must submit their responses by the deadline of September 30, 2026, following the posting date of September 23, 2026.

Roofing Contractors

POSTED

DEADLINE

EIFS InstallationThis subcontract involves the installation of polymer-based Exterior Insulation and Finish Systems (EIFS) for prime contractors working on projects managed by the New York City Department of Design and Construction. The scope of work focuses on applying exterior insulation and finish systems to building surfaces and delivering completed EIFS cladding within New York. The opportunity is categorized under NAICS code 238160. Interested parties must note the response deadline of September 30, 2026, following the posting date of September 23, 2026. Further details and application processes are managed through the City of New York passport portal.

Roofing Contractors

POSTED

DEADLINE

Rough CarpentryThis subcontract opportunity is for the provision of structural and rough carpentry services for prime contractors working on projects for the New York City Department of Design and Construction. The scope of work involves the installation and delivery of rough carpentry framing and supports as specified by the project requirements. The contract is categorized under NAICS code 238130 and is based in New York. Interested parties must note the posting date of September 23, 2026, with a response deadline set for September 30, 2026.

Framing Contractors

POSTED

DEADLINE

Masonry CleaningThis subcontract opportunity is for the professional cleaning of existing masonry surfaces on projects managed by the New York City Department of Design and Construction. The selected provider will work under prime contractors to deliver cleaned masonry facades, with specific responsibilities including the removal of paint, application of preliminary cleaning materials, masking of adjacent surfaces, and the management of runoff and waste neutralization. The project is located in New York City and falls under NAICS code 238140. Interested parties must submit their responses by the deadline of September 30, 2026.

Masonry Contractors

POSTED

DEADLINE

Masonry Restoration & RepairThis subcontract for Masonry Restoration and Repair supports prime contractors on projects for the New York City Department of Design and Construction. The scope of work involves the repair and restoration of brick and cast stone masonry, including the supply of necessary mortar and masonry materials. Key deliverables include the restoration of exterior masonry walls, the replacement of deteriorated steel lintels, and the installation of cast stone masonry using manufactured repair materials. The project is located in New York and falls under NAICS code 238140. Interested parties must note the response deadline of September 30, 2026, following the posting date of September 23, 2026. Detailed application and process management can be accessed through the City of New York passport portal.

Masonry Contractors

POSTED

DEADLINE

Asbestos AbatementThis subcontract opportunity is for the performance of hazardous material removal and abatement services on projects managed by the New York City Department of Design and Construction. The selected contractor will be responsible for executing incidental asbestos abatement based on NYC DEP Asbestos Assessment reports to ensure the delivery of certified asbestos-free work areas. Eligible bidders must hold a Licensed Asbestos Abatement Contractor certification and operate under NAICS code 562910. The project is located in New York City, with a response deadline of September 30, 2026.

Remediation Services

POSTED

DEADLINE

Energy Code Compliance InspectionsThis subcontract for Energy Code Compliance Inspections is managed by the New York City Department of Design and Construction. The selected provider will be responsible for performing progress inspections for prime contractors to ensure strict adherence to energy codes, with specific duties and standards outlined in Exhibit F. Key deliverables include the submission of detailed inspection reports and official compliance certifications. The project is based in New York City and falls under NAICS code 541330. Interested parties must respond by September 30, 2026, following the posting date of September 23, 2026. Further details and application processes are available through the City of New York Passport portal.

Engineering Services

POSTED

DEADLINE

Testing and Laboratory ServicesThis subcontract for Testing and Laboratory Services supports prime contractors working on projects for the New York City Department of Design and Construction. The scope of work involves providing comprehensive material testing and laboratory analysis to ensure all project components meet specific compliance requirements. Key deliverables include the generation of material test reports and formal compliance certifications as outlined in Exhibit D. The contract is categorized under NAICS code 541380 and is based in New York City. Interested parties must respond by September 30, 2026, following the posting date of September 23, 2026. Further details and application processes are managed through the City of New York Passport system.

Testing Laboratories and Services

POSTED

DEADLINE

Exterior Painting & CoatingsThis subcontract opportunity is for the Department of Design and Construction in New York City, focusing on exterior painting and the application of specialty coatings. The selected provider will work as a subcontractor for prime contractors to deliver painted and coated exterior surfaces, specifically including the application of graffiti-resistant coatings. The project falls under NAICS code 238320 and is based in New York. Interested parties must note that the posting date is September 23, 2026, with a response deadline of September 30, 2026.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Metal Window Maintenance & RepairThis subcontract opportunity is for the operation and maintenance of metal windows on projects managed by the New York City Department of Design and Construction. The selected provider will work for prime contractors to ensure all metal windows are fully operational and weather-tight. Key responsibilities include adjusting operating sashes, screens, and hardware, lubricating moving parts, and replacing any broken or damaged glass. The project falls under NAICS code 238150 and is located in New York City. Interested parties must respond by September 30, 2026, following the posting date of September 23, 2026.

Glass and Glazing Contractors

POSTED

DEADLINE

Joint Sealants & CaulkingThis subcontract opportunity is for the provision of joint sealing and caulking services for prime contractors working on projects for the New York City Department of Design and Construction. The scope of work involves preparing sealant joints and installing joint fillers and sealants for windows and repaired masonry to ensure all joints are sealed and weather-tight. The contract is categorized under NAICS code 238390 and is based in New York City. Interested parties must note the posted date of September 23, 2026, with a response deadline of September 30, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS