Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metal Tube Assembly Fabrication and Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the fabrication and delivery of a precision metal tube assembly under the National Stock Number and Performance Requirement specifications, adhering strictly to military standards throughout all phases of production. This includes the bending, finishing, packaging, and labeling of the assembly to ensure full compliance with defense-grade quality and operational requirements. The work is classified as a subcontract under NAICS code 332311, indicating involvement in forgings and stampings, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 14, 2026, and while specific location details for performance or contact are not provided, the contract is linked to DIBBS procurement systems for award tracking under reference SPE7M126P3999. All deliverables must meet exacting military specifications to ensure suitability for defense applications, with no set-aside provisions indicated for small or disadvantaged businesses.

General Info

Fabrication and delivery of precision metal tube assembly to military specs under DLA contract SPE7M126P3999.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-0113.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and deliver a precision metal tube assembly per NSN and PR specifications, including bending, finishing, packaging, and labeling in compliance with military standards.

Similar Contracts

Same NAICS industry code

JSCG-P - Pre-Engineered Building Supplies With Roof Panels at Escuela Cosecha Amistad, Veracruz, Panama

Solicitation # W912CL-27-Q-0000

The Department of Defense is conducting market research to identify qualified vendors capable of purchasing and transporting materials for a pre-engineered building in Veracruz, Panama. The project involves the delivery of supplies to construct an 11M x 15M x 5.5M structure with roof panels at Escuela Cosecha Amistad. A critical requirement is that the interior of the canopy must remain clear space to allow for soccer and basketball activities. All materials must be delivered on-site by March 2027. This is a sources sought notice and not a formal solicitation. Interested parties must submit a technical capability statement demonstrating their ability to procure and deliver prefabricated building supplies across Panama, along with a rough order of magnitude for estimated pricing. Submissions are due to MAJ Vernon Shank by November 9, 2026, at 12:00 PM CST.

0410 Aq Hq Contract

POSTED

about 24 hours ago

DEADLINE

Modular Building Supply and InstallationThis subcontract for Modular Building Supply and Installation involves the provision of turnkey, code-compliant modular workspace units for prime contractors working on Texas Military Department facility projects at Camp Mabry. The scope of work includes the fabrication of modular units, transportation management, installation on existing foundations, and the management of mate lines. To ensure structural integrity and compliance, the contractor must provide sealed engineering calculations and drawings. The project requires a dedicated project manager and superintendent, with a mandate to provide EMR and OSHA 300 logs for safety verification. The ultimate goal is the delivery of fully occupancy-ready modular facilities. Interested parties must respond by November 17, 2026, under NAICS code 332311.

Texas Military Department

POSTED

DEADLINE

Solicitation # SPMYM227Q1113

Solicitation SPMYM227Q1113 is a 100% total small business set-aside for a firm fixed-price supply contract to provide roof tarpaulins for the DLA Maritime Puget Sound. The required items include roof tarps in sizes 8'5" x 100' (P/N 5972374 or TI-L-2.57MX30) and 8'5" x 70' (P/N TI-L-2.57MX22.5M), both of which must be compatible with Layher brand scaffolding roof trusses. Delivery is FOB Destination to Bremerton, Washington, with a requested delivery date on or before November 5, 2026. The procurement falls under NAICS code 332311 and PSC 5440. Offers are due by November 2, 2026, at 10:00 AM PDT. To be considered, bidders must be registered in SAM.gov, provide unit price line-item pricing, submit manufacturer information, and complete all required representations and certifications. Award will be based on the most advantageous offer, considering price, technical criteria, and past performance evaluated via the Supplier Performance Risk System. Packaging must adhere to ASTM-D-3951 and MIL-STD-129 standards, with specific prohibitions on materials like asbestos and loose fill polystyrene. Invoicing must be processed electronically through Wide Area Work Flow using a combo invoice and receiving report.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Bus Shelters and Amenities

Solicitation # 26-15

Ben Franklin Transit is soliciting proposals under RFP 26-15 for the design, fabrication, and delivery of prefabricated bus stop shelters to serve its urban transit system in Washington. The project requires shelters to be structurally engineered by a registered architect, weatherproof, vandal-resistant, and compliant with all applicable building codes and ADA requirements. Key technical specifications include the use of clear tempered safety glass, anti-graffiti coating, and a preference for tinted polycarbonate roof materials, while polycarbonate panel inserts are rejected. Shelters must be shipped knock-down for on-site assembly and must be capable of supporting future on-time arrival technology displays without structural modification. Optional amenities may include ADA-compliant benches, lean rails, trash receptacles, bicycle racks, and solar-powered LED lighting. The contract has a maximum value of 950,000 dollars and a potential five-year term, with an initial minimum order of ten shelters to be delivered within 120 calendar days of the Notice to Proceed. Price adjustments for subsequent years are capped at 5 percent based on the CPI. BFT requires a minimum three-year workmanship warranty and a five-year finish warranty, with replacement parts guaranteed for ten years. Proposals must be submitted via the OpenGov portal by December 8, 2026, at 2:00 pm PDT. Evaluation is based on the best interest of BFT, and awarded contractors must register with the System for Award Management within five days of notification. Payment terms are set at 30 calendar days following the receipt of a proper invoice.

POSTED

DEADLINE

in about 1 month

Metal Pipe Assembly SupplierThis subcontract involves the manufacture or sourcing of one Metal Pipe Assembly, identified by NSN 4710015413878, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier must ensure that all materials and assembly tools comply with the DLA Master List of Technical and Quality Requirements to meet strict technical specifications. The project falls under NAICS code 332311 and will be performed in Buzzards Bay, Massachusetts. Interested parties must respond by November 9, 2026, to provide the completed assembly as required by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Compressor Valve Assemblies (NSN 4130-00-795-5015)This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the procurement of 35 compressor valve assemblies under NSN 4130-00-795-5015. The selected provider is responsible for sourcing or manufacturing the assemblies, ensuring they are designated country end products, and adhering to strict military standards for packaging and marking per MIL-STD-2073-1E and MIL-STD-129. All units must be delivered within 115 days after the order is placed. The opportunity is categorized under NAICS code 332311 and is designated as a Total Small Business Set-Aside. Interested parties must respond by November 5, 2026, to support prime contractors fulfilling DLA supply contracts. Performance will take place in the 17070-5002 zip code area.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340016522378)This subcontract involves the precision manufacture and supply of 6,000 mounting brackets, identified by NSN 5340016522378, for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The production must strictly adhere to Part Number 7018894609, Basic Drawing NR 19207 12580799 (Rev 07/01/2015), and Reference Drawing NR 19207 12580799 (Rev 05/14/2021), while maintaining compliance with the DLA Technical and Quality Master List of Requirements. The project falls under NAICS code 332311 and specifies Fort Bliss, Texas, as the place of performance. Interested parties must note the posted date of October 29, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Laminated Vehicular Window (NSN 2510219123610)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the provision of one warranted laminated glass vehicular window. The required item must match NSN 2510219123610 and correspond to part numbers WELDCO-BEALES [phone hidden] or R575120. The final product is to be delivered to the NAVSUP Joint Consolidation Point in Mechanicsburg, Pennsylvania. Strict adherence to military standards is required for the fulfillment of this contract. Shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Special Marking Code 07 and RP001 palletization requirements. The opportunity is categorized under NAICS code 332311, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Tube Assembly ManufacturingThis subcontract involves the manufacture of custom metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work requires the fabrication of assemblies based on six specific reference drawings using precision tube bending and welding equipment. The contractor is responsible for performing First Article Testing and providing all necessary material certifications to ensure compliance with technical specifications. The final deliverables consist of nine units of NSN 4710010267138 along with a comprehensive FAT report. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332311.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

PROC-26-3457 Supply and Delivery of Modular Rapid Assembly Training Venues

Solicitation # 26-3457

The Scottish Police Authority is seeking a single contractor for the supply and delivery of modular rapid assembly training venues under solicitation number 26-3457. This procurement process is designed to secure a provider capable of delivering specialized modular structures to meet the organization's training facility requirements. The solicitation was posted on October 29, 2026, with a response deadline set for November 30, 2026. Interested parties may coordinate with the point of contact, Ewen Macluskie, to facilitate the submission process before the closing date.

Scottish Police Authority

POSTED

DEADLINE

Solicitation_S-280C/G Vehicle Mounted Shelter

Solicitation # W912CH-26-R-A096

The Army Contracting Command - Detroit Arsenal is soliciting proposals for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity contract for the manufacture and delivery of four variants of the S-280C/G Vehicle Mounted Shelter. These tactical military shelters, available in shielded and unshielded versions with or without mobilizer adapter kits, are designed to protect personnel and sensitive electronic equipment from demanding field environments and electromagnetic interference. The contract has a minimum guaranteed value of 100,000 dollars and a maximum estimated ceiling of 4,000,000 dollars. This is a 100 percent small business set-aside under NAICS 332311, with award based on a best-value tradeoff process evaluating technical factors, specifically EMI shielding design and manufacturing processes, and price. The scope of work includes first article testing, production, and the delivery of associated technical and logistics data, including the update of Technical Manual TM 10-5411-207-13&P. Manufacturing must strictly adhere to the Government-owned Technical Data Package and ASTM E1975-22 standards. Key delivery requirements include a first article test report due within 240 calendar days of contract award and a maximum monthly production rate of 20 shelters. Deliveries are FOB Destination, with an estimated distribution of 75 percent to CONUS locations, such as Sierra Army Depot, and 25 percent to OCONUS locations including Germany, Korea, or Japan. Due to the export-controlled nature of the technical data, offerors must possess a valid DD Form 2345 certification.

POSTED

DEADLINE

Manufacturing of Water Trailer Faucets (NSN 4510014330396)This subcontract involves the manufacture of 98 single faucets for prime contractors supporting DLA Troop Support supply contracts for M149A2 and M1112 400-gallon water trailers. The units must be fabricated according to TDP Rev A Gen 1 and Basic Drawing NR 19207 12406415, featuring 3/4 inch NPT inlet connections. All products must ensure potable water safety and adhere to MIL-STD-1916 or ASQ H1331 sampling standards. The project is managed under the Department of Defense through the Albany Transportation Officer. Strict compliance with the Buy American Act and the Berry Amendment is required for all materials used. The performance of the contract will take place in Albany, Georgia.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-27-R-X035

Solicitation SPE4A6-27-R-X035 is an Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC Commodities Division for the procurement of special purpose electrical cable assemblies, identified by NSN 6150-01-496-6576. The contract establishes a five-year base period with a total order ceiling of 350,000 dollars. The requirement specifies a quantity of 70 units per year, with a guaranteed minimum of 20 units for the base year. Delivery is required 188 days after the date of order, with shipping, inspection, and acceptance all occurring at the point of origin. The award will be based on a best-value trade-off assessment, weighing price, past performance, and quoted delivery equally. Past performance evaluations will prioritize SPRS assessments and historical quality and delivery compliance. Technical compliance is governed by ISO 9001:2015 quality standards and specific technical data packages, including drawing 12476747. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Additionally, the contractor must comply with CMMC Level 2 self-assessment and DFARS safeguarding requirements for covered defense information. Payment will be processed electronically through the Wide Area WorkFlow system.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Battery Testing and Certification ServicesThis subcontract for Battery Testing and Certification Services, issued by the Defense Logistics Agency under the Department of Defense, requires the performance of First Article Testing and Government Production Lot Testing for prime contractors. The selected provider will be responsible for validating assemblies in accordance with QAP 81337 11-1-9487 and preparing DD1222 forms for submission to the U.S. Army Combat Capabilities Development Command. Deliverables include certified test reports and samples, with a strict requirement for ISO 9001 quality management certification. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 2, 2026. This contract ensures that critical battery components meet rigorous military specifications and quality standards before being integrated into the supply chain.

Testing Laboratories and Services

POSTED

DEADLINE

HAZMAT Packaging and LogisticsThis SBA Total Small Business Set-Aside subcontract involves providing specialized packaging, marking, and transportation services for battery assemblies supporting Defense Logistics Agency supply contracts. The contractor is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards, while also preparing necessary HAZDEC certifications. Final delivery of the processed assemblies is required at DMO Camp Kinser, Japan. To qualify for this performance, the contractor must maintain IP025 HAZMAT certification and strictly comply with 29 CFR 1910.1200 safety regulations. The project falls under NAICS code 562112 and is managed through the Department of Defense.

Hazardous Waste Collection

POSTED

DEADLINE

Critical Safety Battery Assembly ServicesThis subcontract for Critical Safety Battery Assembly Services involves the physical assembly of battery units for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes the integration of cells, wiring, and housing in strict accordance with Reference Drawing NR 81337 11-1-9467 and QAP 81337 11-1-9487 to deliver completed Battery Assemblies under NSN 6140-01-609-7775. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910. Due to the nature of the work, the contractor must maintain CMMC Level 2 certification for the handling of Covered Defense Information and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 30, 2026, with a response deadline of November 2, 2026.

Battery Manufacturing

POSTED

DEADLINE

Li-Ion Battery Cell SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the manufacture and supply of high-grade Lithium-Ion battery cells for prime contractors. The cells must be produced in accordance with TDP Rev B Gen 4 specifications and must be free of intentionally added mercury as per NAVSEA 5000-003D. The selected provider is required to deliver comprehensive material certifications and quality documentation to ensure all technical standards are met. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335911. Strict adherence to ITAR and EAR compliance is mandatory, and the supplier must hold HAZDEC certification. Interested parties must submit their responses by November 2, 2026, to provide certified battery cells that meet these rigorous defense requirements.

Storage Battery Manufacturing

POSTED

DEADLINE

Military-Grade Oxygen Component PackagingThis subcontract involves the specialized packaging, marking, and sealing of oxygen-cleaned components to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires strict adherence to IP042 oxygen clean packaging standards, MIL-STD-2073-1E, and RP001 DLA requirements, specifically utilizing non-outgassing materials to ensure component integrity. Additionally, all items must be marked in accordance with MIL-STD-129. The primary objective is the delivery of packaged valves prepared for international shipment to Maestranza Aerea de Madrid. This effort is managed under the Department of Defense through the Defense Logistics Agency, with a response deadline of November 7, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Oxygen System Check Valve SupplierThis subcontract through the Defense Logistics Agency involves the supply of two 1/4 inch check valves intended for prime contractors supporting Spanish Air Force supply contracts. The required components must meet NSN 4820-00-232-7570 specifications, specifically referencing manufacturer part number 2192-502-007-1 from Mission Systems Orchard Park Inc. Technical requirements mandate that the valves be constructed from high-pressure oxygen-compatible materials capable of supporting a maximum operating pressure of 500 PSI. The solicitation was posted on October 30, 2026, with a response deadline of November 7, 2026, falling under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

SWITCH, RADIO FREQUENCY

Solicitation # SPE7M5-27-Q-0121

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7M5-27-Q-0121 for the procurement of 20 Radio Frequency Switches. The items are identified by NSN/Part Number 5985-00-321-7640 and are requested under purchase request 7017775859. This federal solicitation was posted on October 30, 2026, with a response deadline set for November 10, 2026. Interested parties may coordinate through the primary point of contact, DibbsBSM, via the provided agency email.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

VALVE, CHECK, OXYGEN SYS

Solicitation # SPE7MC-27-Q-0041

Solicitation SPE7MC-27-Q-0041 is a small business set-aside for the procurement of two 1/4 inch check valves for oxygen systems, identified by NSN 4820-00-232-7570. These critical application items must support a maximum operating pressure of 500 PSI and are specified as part number 2192-502-007-1 from Mission Systems Orchard Park Inc. The contract is established as a firm fixed price award with a delivery timeline of 147 days after order. The final destination for these supplies is the Spanish Air Force at Maestranza Aerea de Madrid in Spain, with both inspection and acceptance occurring at the destination. The contractor must adhere to stringent technical and quality standards, including cleaning and drying requirements per MIL-STD-1330D for oxygen cleaned items and compliance with IP042 oxygen clean packaging and marking requirements. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging requirements, while marking must align with MIL-STD-129. Award decisions will be based on best value, evaluating price, offered delivery, and past performance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic origin, and hazardous material labeling.

Industrial Valve Manufacturing

POSTED

DEADLINE

HEADSET-MICROPHONE

Solicitation # SPE7MX-26-R-X089

Solicitation SPE7MX-26-R-X089 is an unrestricted, fixed-price acquisition issued by the Defense Logistics Agency Land and Maritime for Headset-Microphone units, NSN 5965-01-204-8505, part number M87819/1-01. The procurement is conducted under Simplified Acquisition Procedures and requires compliance with MIL-PRF-87819/1B(2) and MIL-PRF-87819B(3) specifications. Quotations are due by November 30, 2026, and must remain firm for 60 calendar days. The contract allows for a total duration of up to five years, with an initial delivery requirement of 426 days after the order date. Shipping is designated as FOB Origin, while inspection and acceptance will occur at the destination. The government may utilize a single or split award based on a trade-off between price and non-price factors, which are considered approximately equal in importance. Evaluation criteria include price, past performance as measured by the Supplier Performance Risk System, proposed delivery, and small business participation. All offerors must submit a Small Business Participation Commitment Document pledging a minimum of 3 percent annual small business usage. Additionally, the contract mandates strict adherence to cybersecurity standards, including CMMC and DFARS 252.204-7012, as well as specialty metals compliance and prohibitions on hexavalent chromium and ozone-depleting substances.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0125

Solicitation SPE8E4-27-T-0125 is a total small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 51 feet of metal bar. The material is specified as Steel Comp M2, hot rolled or forged, round and annealed, with a 6.000 inch diameter and lengths between 6 and 12 feet, weighing 105.740 lb/ft. This is a Foreign Military Sale requirement for delivery to the Parts-Attach General Depot in Tainan City, Taiwan, with a required delivery date of October 8, 2026, and a delivery window of 20 days after order. Inspection and acceptance are conducted at the point of origin. The contract mandates strict adherence to technical and quality standards, including ASTM A600-92A and QAP 13873. A Certificate of Quality Compliance is required for every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Iron and Steel Forging

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS