This Solicitation opportunity from Department Of Defense was posted on September 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

METER, SPECIAL SCALE

Closed

SPE7M1-26-T-316HFederal

Submission Closed09/11/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

Federal

Electrical Test Set Supply

POSTED

DEADLINE

Radio Detection Kit with Accessories - No Alternatives

Solicitation # JL484787

Brookhaven Science Associates (BSA) is soliciting quotations for a Firm Fixed Price purchase order to procure a Radiodetection 8200SG Locator Kit and associated accessories for Brookhaven National Laboratory (BNL). The required equipment includes an 8200SG Receiver with RTK GPS, a TX-10B Transmitter with ILOC, a one-year Pointman Plus utility mapping software license, and various rechargeable battery kits, signal clamps, and an A-frame with bag. The total estimated value of the purchase order is 23,084.11 USD. Proposals are due by November 17, 2026, and must remain valid for at least sixty days. Award will be based on the lowest total evaluated price that meets all technical requirements. The contract mandates strict adherence to quality and shipping standards, requiring ISO 9001 certification or a manufacturer's quality program and compliance with ASTM Standard D 3951 for commercial packaging. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory (NRTL). Shipping terms are FOB Destination, Freight Prepaid, with specific requirements for items over 150 lbs and strict prohibitions on the use of vermiculite unless certified asbestos-free. Deliveries must be made to BNL Building 98 or designated satellite stockrooms in Upton, New York, during specified business hours. Quotations must include the country of origin, Unique Entity Identifier (UEI), and applicable ECCN and HTS codes.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Peak Power Analyzer, Peak Power Sensors, and Power Sensor Cables

Solicitation # N6833527R1006

The Naval Air Systems Command (NAVAIR) Warfare Center Aircraft Division is soliciting proposals for a three-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to modernize equipment for the Metrology and Calibration (METCAL) Program. The procurement covers Peak Power Analyzers, Peak Power Sensors, and Power Sensor Cables, with quantities ranging from a minimum of 3 to a maximum of 100 analyzers, and minimums of 6 to maximums of 200 for both sensors and cables. All hardware must comply with Calibration Standards Specification (CSS) 01-3244 and ANSI/ISA S82.02.01-1999 safety standards. The contract period of performance runs from February 26, 2027, to February 25, 2030, and utilizes firm-fixed-price pricing for CLINs 0001 through 0012. Key deliverables include the primary hardware, support equipment for maintenance and calibration, training at two government sites, and several Contract Data Requirements List (CDRL) items, including COTS manuals and supply chain management data. Proposals will be evaluated based on the lowest evaluated price among offerors rated as acceptable in both technical compliance and past performance, with the latter verified via the Supplier Performance Risk System (SPRS). The contract mandates strict adherence to MIL-STD-130N for item unique identification and MIL-STD-129 for shipment labeling. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system, with inspection occurring at the destination in Beaufort, South Carolina, and final acceptance at Joint Base MDL, New Jersey.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Configurable signal conditioning interface with 8 modules. 6U, 19"

Solicitation # PR511096

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

CM26134001- Sources Sought

Solicitation # SPE7MX26RX081

The Department of Defense, through DLA Weapons Support, is seeking sources for the acquisition of electrical test equipment and storage batteries under solicitation SPE7MX26RX081. The requirement consists of four CLINs, including multimeters, electrical test sets, and storage batteries, with quantities ranging from 9 to 937 units. This procurement is a partial small business set-aside, where CLINs 0001 through 0003 are reserved 100% for small businesses, while CLIN 0004 remains unrestricted. The government intends to establish an indefinite quantity contract featuring a three-year base period and two option years, with a total duration not to exceed five years. The acquisition follows commercial item policies per FAR Part 12.201-1, and the government requires FOB Origin. Award decisions will be based on a combination of price, past performance, delivery, and small business participation. The solicitation is managed by the office in Columbus, Ohio, with a response deadline of December 8, 2026. Interested parties can access the solicitation via the DIBBS website.

POSTED

DEADLINE

Solicitation # N0010427QNA36

Solicitation N00104-27-Q-NA36 is a small business set-aside for the teardown, evaluation, and repair of five Automatic DA Servers for the Navsup Weapon Systems Support Mech. The contract is structured as a firm-fixed-price award and is certified for national defense under the Defense Priorities and Allocations System. The selected contractor will have 90 days from the receipt of carcasses to complete a teardown and evaluation and submit a firm-fixed-price quote for the full repair effort. The government has requested a repair turn around time of 50 days, and failure to meet this requirement will result in a price reduction per unit. The scope of work requires all repairs to be performed according to the contractor's standard practices and original manufacturer specifications, ensuring the items meet operational requirements for specific cage codes. Key technical mandates include strict adherence to mercury-free requirements for use on submarines and surface ships, and packaging and marking in accordance with MIL-STD-2073-1 and MIL-STD-129. The contractor is responsible for all inspections, though the government reserves the right to perform its own. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. A one-year warranty from the date of delivery is required for all supplies.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Integrated High Frequency advanced electronic test and measurement platform

Solicitation # 26-58206

The National Research Council Canada is seeking an integrated high frequency advanced electronic test and measurement platform to support the Quantum Technology Demonstration Centre in Ottawa. The system must provide a unified environment for the generation, analysis, and characterization of RF and microwave signals from low frequencies up to at least 54 GHz. Key hardware requirements include a dual-channel vector signal generator capable of 54 GHz with 2.5 GHz modulation bandwidth per channel, a signal source analyzer for evaluating phase and amplitude noise, and a high purity analog digital signal generator with very low phase noise. The solution must be delivered as a complete operational package including all hardware, software licenses, cables, accessories, warranties, and support services, with a delivery deadline of 200 days after contract award. To ensure a common user experience and seamless collaboration, the equipment must be compatible with existing Keysight Technologies systems and the X-series common software architecture, operating under a unified system management and control software platform. Due to these specific technical requirements, the procurement is designated as a sole source for Keysight Technologies Canada Inc. Eligibility is further restricted to Canadian suppliers or concerned trade partner suppliers under the Federal Strategic Procurement Canadian Supplier and Canadian Content Prioritization Policy.

National Research Council of Canada

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0552

This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of Bromine Colorimeters under NSN 6630-01-690-5334. The requirement consists of multiple line items, including a primary request for two units and an additional unit under a separate line item. The contract is a fixed-price acquisition with a delivery timeframe of 20 days after order, with a required delivery date of November 16, 2026. Delivery is FOB Destination, with specified shipping destinations including the USS Hopper DDG 70 and USS Santa Barbara LCS 32. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging and Medical Marking Standard No. 1 for labeling. All shipments must be processed through the Wide Area WorkFlow (WAWF) system for payment and receiving reports. The solicitation is governed by NAICS code 334515 and incorporates various FAR and DFARS clauses, including requirements for basic safeguarding of contractor information systems, the Buy American and Balance of Payments Program, and prohibitions on covered defense telecommunications equipment. Inspection and acceptance will occur at the destination point.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2624

Solicitation SPE7M1-27-T-2624, issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain, is for the procurement of four units of Test Lead (NSN 6625-001405037), specifically Fluke Electronics Corp part number 2BA-60. The contract requires delivery within 20 days, with an original required delivery date of November 9, 2026. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in Yuma, Arizona. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Materials identified as hazardous per FED-STD-313 must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard, while non-hazardous materials must follow ASTM D3951. Administrative requirements include the use of Wide Area Workflow (WAWF) for electronic invoicing and receiving reports. The contract incorporates several critical FAR and DFARS clauses, including destination inspection, safeguarding covered defense information, and prohibitions on the acquisition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A1-27-T-0355

Solicitation SPE4A1-27-T-0355 is a procurement issued by the DLA Weapons Support Aviation Supply Chain for the acquisition of 11 units of the Indicator, Torque Me (NSN 6620-01-677-4611). The items are source-controlled and must be manufactured and tested according to reference drawing 19207 12612043, Revision A. Delivery is required within 126 days after order, with a required delivery date of January 12, 2026, shipped FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and security standards, including sampling per MIL-STD-1916 or ASQ H133 and packaging according to MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, the contract is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Furthermore, the contract incorporates rigorous cybersecurity requirements, including CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

WATER QUALITY ANALYSIS

Solicitation # SPE4A5-27-T-2348

Solicitation SPE4A5-27-T-2348, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for two water quality analysis sets, identified by NSN 6630-01-690-2431 and Parker Hannifin Corporation part number 61012050. The procurement is categorized under NAICS 334515 and requires delivery to DLA Distribution San Joaquin in Tracy, California, by June 10, 2027. The contract is established as FOB Origin with a delivery timeframe of 209 days after order. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 certification. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with destination inspection and acceptance required per FAR 52.246-2. Packaging must be commercial and compliant with MIL-STD-2073-1E and RP001, while marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129. Item Unique Identification is not required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity reporting standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

ANALYZER, BLOOD GLUCOSE

Solicitation # SPE2DH-27-T-0532

Solicitation SPE2DH-27-T-0532, issued by the DLA Troop Support Medical Supply Chain FSH, is a small business set-aside for the procurement of four Prodigy Pocket Meter Kits in blue. These blood glucose analyzers are lightweight, no-coding devices that power on automatically upon test strip insertion, providing accurate results in seven seconds. The devices feature a 120-test memory with date and time tracking, and the ability to calculate 7, 14, and 28-day averages. The items are designated under NSN 6630-01-690-1933 and must be delivered to the USS ILLINOIS (SSN 786) in Pearl Harbor, HI, by November 16, 2026. The contract mandates strict adherence to Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129, and packaging requirements under MIL-STD-2073-1E. All units must be delivered in suitable sealed commercial containers to prevent damage. Quality and technical requirements are governed by the DLA Master List, with a specific non-extendable shelf-life requirement of 36 months; notably, no more than five months can elapse between the date of manufacture and delivery. Administrative compliance requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and basic safeguarding of contractor information systems.

MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Solicitation SPE7M1-26-T-316H is a request for quotations issued by DLA Land and Maritime for the procurement of 31 units of a Special Scale Meter, identified by NSN 6625-01-322-4225. This procurement is designated as a Women-Owned Small Business set-aside. The required delivery date is February 4, 2027, with a need ship date of February 16, 2027, and a delivery window of 160 days after order. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, including specific provisions for the removal of government identification from non-accepted supplies and hazardous material handling. Notably, the item may contain batteries and must comply with mercury restrictions per NAVSEA 5100-003D. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must also comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

General Info

DoD procurement of 31 special scale meters for Women-Owned Small Businesses by 2027.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

WOSB

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

View Full Breakdown

Timeline

1 update

PhaseClosed

PostedAug 27

Solicitation

Deadline changedSep 9

Response deadline changed from Sep 8, 2026 to Sep 11, 2026.

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Office AddressUSA

Contacts

Michael Reese

Full Description

METER,SPECIAL SCALE
METER,SPECIAL SCALE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ035: ITEM MAY CONTAIN BATTERIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
HUGHES CORP 88416 P/N 714B466A31
MKC ELECTRONICS INC 0BZM1 P/N MK701-125
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017984767 0001 EA 31.000
NSN/MATERIAL:6625013224225
DELIVERY (IN DAYS):0160
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M1-26-T-316H
SECTION B
PR: 7017984767 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/16/2027 Original Required Delivery Date:02/04/2027
SPE7M1-26-T-316H NSN/Part Number: 6625-01-322-4225 Quantity: 31 EA Purchase Request: 7017984767QTY: 31 Delivery: 160 days ADO